TE-MIB

Object (OID)

Access

Syntax

Value range

Description

Implementation

teDistProtocol

(1.3.6.1.2.1.122.1.1.1)

read-only

BITS

other(0),

isis(1),

ospf(2)

TE distribution protocol type.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

teSignalingProto

(1.3.6.1.2.1.122.1.1.2)

read-only

BITS

other(0),

rsvpte(1),

crldp(2),

static(3)

TE signaling protocol type.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

teNotificationEnable

(1.3.6.1.2.1.122.1.1.3)

read-write

TruthValue

true(1),

false(2)

Enable notifications.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

teNextTunnelIndex

(1.3.6.1.2.1.122.1.1.4)

read-only

Unsigned32

Unsigned32

(1..4294967295)

Next tunnel index.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

teNextPathHopIndex

(1.3.6.1.2.1.122.1.1.5)

read-only

Unsigned32

Unsigned32

(1..4294967295)

Next path index.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

teConfiguredTunnels

(1.3.6.1.2.1.122.1.1.6)

read-only

Gauge32

Gauge32

(0..4294967295)

Number of configured tunnels.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

teActiveTunnels

(1.3.6.1.2.1.122.1.1.7)

read-only

Gauge32

Gauge32

(0..4294967295)

Number of active tunnels.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

tePrimaryTunnels

(1.3.6.1.2.1.122.1.1.8)

read-only

Gauge32

Gauge32

(0..4294967295)

Number of tunnels running on their primary paths.

As per the MIB.

Create

Edit/Modify

Delete

Read

Supported.

When you create a tunnel interface, you can leave teTunnelDestinationAddress empty.

If you need to assign a tunnel interface an IP address, you need to specify teTunnelDestinationAddress when you create the tunnel interface.

Not supported

Not supported

Supported

teTunnelIndex

(1.3.6.1.2.1.122.1.2.1.1)

not-accessible

Unsigned32

Unsigned32

(1..4294967295)

Index of a tunnel.

As per the MIB.

teTunnelName

(1.3.6.1.2.1.122.1.2.1.2)

read-create

SnmpAdminString

OCTET STRING

(1..32)

Name of the tunnel.

As per the MIB.

teTunnelNextPathIndex

(1.3.6.1.2.1.122.1.2.1.3)

read-only

Unsigned32

Unsigned32

(1..2147483647)

Next path index.

As per the MIB.

teTunnelRowStatus

(1.3.6.1.2.1.122.1.2.1.4)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4), createAndWait(5),

destroy(6)

Row status.

Supports only active(1), createAndGo(4), and destroy(6).

teTunnelStorageType

(1.3.6.1.2.1.122.1.2.1.5)

read-create

StorageType

other(1),

volatile(2),

nonVolatile(3),

permanent(4),

readOnly(5)

Storage type.

Not supported. The value is always nonvolatile(3).

teTunnelSourceAddressType

(1.3.6.1.2.1.122.1.2.1.6)

read-only

TeHopAddressType

unknown(0),

ipv4(1),

ipv6(2),

asnumber(3),

unnum(4),

lspid(5)

Type of the source address.

Supports only ipv4(1).

teTunnelSourceAddress

(1.3.6.1.2.1.122.1.2.1.7)

read-create

TeHopAddress

0..32

Source address.

Supports only the read operation.

teTunnelDestinationAddressType

(1.3.6.1.2.1.122.1.2.1.8)

read-create

TeHopAddressType

unknown(0),

ipv4(1),

ipv6(2),

asnumber(3),

unnum(4),

lspid(5)

Type of the destination address.

Supports only ipv4(1).

teTunnelDestinationAddress

(1.3.6.1.2.1.122.1.2.1.9)

read-create

TeHopAddress

OCTET STRING

(0..32)

Destination address.

As per the MIB.

teTunnelState

(1.3.6.1.2.1.122.1.2.1.10)

read-only

INTEGER

unknown(1),

up(2),

down(3),

testing(4)

Tunnel status.

Supports only up(2) and down(3).

teTunnelDiscontinuityTimer

(1.3.6.1.2.1.122.1.2.1.11)

read-only

TimeStamp

Standard MIB values.

Time when traffic was interrupted.

Not supported. The value is always 0.

teTunnelOctets

(1.3.6.1.2.1.122.1.2.1.12)

read-only

Counter64

Counter64

(0..18446744073709551615)

Number of octets that have been forwarded over the tunnel.

Not supported. The value is always 0.

teTunnelPackets

(1.3.6.1.2.1.122.1.2.1.13)

read-only

Counter64

Counter64

(0..18446744073709551615)

Number of packets that have been forwarded over the tunnel.

Not supported. The value is always 0.

teTunnelLPOctets

(1.3.6.1.2.1.122.1.2.1.14)

read-only

Counter32

Counter32

(0..4294967295)

Number of octets that have been forwarded over the tunnel.

Not supported. The value is always 0.

teTunnelLPPackets

(1.3.6.1.2.1.122.1.2.1.15)

read-only

Counter32

Counter32

(0..4294967295)

Number of packets that have been forwarded over the tunnel.

Not supported. The value is always 0.

teTunnelAge

(1.3.6.1.2.1.122.1.2.1.16)

read-only

TimeTicks

Standard MIB values.

The age of this tunnel in hundredths of a second.

As per the MIB.

teTunnelTimeUp

(1.3.6.1.2.1.122.1.2.1.17)

read-only

TimeTicks

Standard MIB values.

Total time in hundredths of a second that this tunnel has been operational (in up state).

As per the MIB.

teTunnelPrimaryTimeUp

(1.3.6.1.2.1.122.1.2.1.18)

read-only

TimeTicks

Standard MIB values.

Total time in hundredths of a second that this tunnel's primary path has been operational.

As per the MIB.

teTunnelTransitions

(1.3.6.1.2.1.122.1.2.1.19)

read-only

Counter32

Counter32

(0..4294967295)

Number of operational state transitions (up-to-down or down-to-up) this tunnel has undergone.

As per the MIB.

teTunnelLastTransition

(1.3.6.1.2.1.122.1.2.1.20)

read-only

TimeTicks

Standard MIB values.

The time in hundredths of a second since the last operational state transition occurred on this tunnel.

As per the MIB.

teTunnelPathChanges

(1.3.6.1.2.1.122.1.2.1.21)

read-only

Counter32

Counter32

(0..4294967295)

Number of path changes this tunnel has had.

As per the MIB.

teTunnelLastPathChange

(1.3.6.1.2.1.122.1.2.1.22)

read-only

TimeTicks

Standard MIB values.

The time in hundredths of a second since the last path change occurred on this tunnel.

As per the MIB.

teTunnelConfiguredPaths

(1.3.6.1.2.1.122.1.2.1.23)

read-only

Gauge32

Gauge32

(0..4294967295)

Number of paths configured for this tunnel.

As per the MIB.

teTunnelStandbyPaths

(1.3.6.1.2.1.122.1.2.1.24)

read-only

Gauge32

Gauge32

(0..4294967295)

Number of standby paths configured for this tunnel.

As per the MIB.

teTunnelOperationalPaths

(1.3.6.1.2.1.122.1.2.1.25)

read-only

Gauge32

Gauge32

(0..4294967295)

Number of operational paths for this tunnel.

As per the MIB.

Create

Edit/Modify

Delete

Read

You must specify tePathName, tePathConfiguredRoute, or both. An error will be returned if you specify both objects but the values conflict, for example, the explicit path name specified by tePathConfiguredRoute is not consistent with the path name specified by tePathName.

If you set the value of tePathConfiguredRoute to 0, the tunnel will use a dynamically calculated path. If you set tePathConfiguredRoute to a non-zero value, you must also specify tePathName and the value of tePathName cannot be null. If you set tePathIndex to a value between 101 and 110, you must specify the tePathType and set its value to standby(3).

Not supported

Supported

The value of NULL for tePathName indicates that the explicit path is dynamically calculated. In this case, the value for tePathConfiguredRoute is also 0.

tePathIndex

(1.3.6.1.2.1.122.1.3.1.1)

not-accessible

Unsigned32

Unsigned32

(1..4294967295)

Preference value of an explicit path, an index that uniquely identifies the path within a tunnel.

As per the MIB.

tePathName

(1.3.6.1.2.1.122.1.3.1.2)

read-create

SnmpAdminString

OCTET STRING

(0..32)

Name of the path.

Supports only the read operation.

tePathRowStatus

(1.3.6.1.2.1.122.1.3.1.3)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4), createAndWait(5),

destroy(6)

Row status.

Supports only active(1), createAndGo(4), and destroy(6).

tePathStorageType

(1.3.6.1.2.1.122.1.3.1.4)

read-create

StorageType

other(1),

volatile(2),

nonVolatile(3),

permanent(4),

readOnly(5)

Storage type.

Not supported. The value is always nonvolatile(3).

tePathType

(1.3.6.1.2.1.122.1.3.1.5)

read-create

INTEGER

other(1),

primary(2),

standby(3),

secondary(4)

Type the path.

Supports only primary(2) and standby(3).

tePathConfiguredRoute
(1.3.6.1.2.1.122.1.3.1.6)

read-create

Unsigned32

Unsigned32

(1..4294967295)

Index of the route that the path is configured to follow.

As per the MIB.

tePathBandwidth

(1.3.6.1.2.1.122.1.3.1.7)

read-create

MplsBitRate

Unsigned32

(0..2147483647)

Bandwidth for the path.

Supports only the read operation.

tePathOperStatus

(1.3.6.1.2.1.122.1.3.1.14)

read-only

INTEGER

unknown(0),

down(1),

testing(2),

dormant(3),

ready(4),

operational(5)

Operational state of the path.

Supports only down(1), dormant(3), and operational(5).

tePathAdminStatus

(1.3.6.1.2.1.122.1.3.1.15)

read-create

INTEGER

normal(1),

testing(2)

Administrative state of the path.

Not supported. The value is always normal(1).

tePathComputedRoute

(1.3.6.1.2.1.122.1.3.1.16)

read-only

Unsigned32

Unsigned32

(1..4294967295)

Index of the route computed for the path.

As per the MIB.

tePathRecordedRoute

(1.3.6.1.2.1.122.1.3.1.17)

read-only

Unsigned32

Unsigned32

(1..4294967295)

Index of the route actually used for the path.

As per the MIB.

Create

Edit/Modify

Delete

Read

The tePathHopAddress object must be specified, and the value for teHopListIndex must be in the range of 0x1 to 0xfffff.

Not supported

Supported

If the value for teHopListIndex is between 1 and 1048575, the information is about a path hop table.

If the value for teHopListIndex is between 1048577 and 2097151, the information is about a path computed route table.

If the value for teHopListIndex is between 2097153 and 3145727, the information is about a path recorded route table.

The computed route table and the recorded route table do not contain tePathHopStorageType and tePathHopType.

teHopListIndex

(1.3.6.1.2.1.122.1.4.1.1)

not-accessible

Unsigned32

Unsigned32

(1..4294967295)

Index that identifies a list of hops.

As per the MIB.

tePathHopIndex

(1.3.6.1.2.1.122.1.4.1.2)

not-accessible

Unsigned32

Unsigned32

(1..4294967295)

Index that identifies a particular hop among the list of hops for a path.

As per the MIB.

tePathHopRowStatus

(1.3.6.1.2.1.122.1.4.1.3)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4), createAndWait(5),

destroy(6)

Row status.

Supports only active(1), createAndGo(4), and destroy(6).

tePathHopStorageType

(1.3.6.1.2.1.122.1.4.1.4)

read-create

StorageType

other(1),

volatile(2),

nonVolatile(3),

permanent(4),

readOnly(5)

Storage type.

Not supported. The value is always nonvolatile(3).

tePathHopAddrType

(1.3.6.1.2.1.122.1.4.1.5)

read-create

TeHopAddressType

unknown(0),

ipv4(1),

ipv6(2),

asnumber(3),

unnum(4),

lspid(5)

Address type of the hop.

Supports only ipv4(1).

tePathHopAddress

(1.3.6.1.2.1.122.1.4.1.6)

read-create

TeHopAddress

OCTET STRING

(0..32)

Address of the hop.

As per the MIB.

tePathHopType

(1.3.6.1.2.1.122.1.4.1.7)

read-only

INTEGER

unknown(0),

loose(1),

strict(2)

Type of the hop.

As per the MIB.

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.122.0.1

TE tunnel up

Recovery

-

-

ON

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.122.1.2.1.2

(teTunnelName)

TE tunnel name

No

SnmpAdminString

OCTET STRING (SIZE (1..32))

1.3.6.1.2.1.122.1.3.1.2

(tePathName)

Name of the TE tunnel's path

No

SnmpAdminString

OCTET STRING (SIZE (0..32))

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.122.0.2

TE tunnel down

Error

Major

-

ON

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.122.1.2.1.2

(teTunnelName)

TE tunnel name

No

SnmpAdminString

OCTET STRING (SIZE (1..32))

1.3.6.1.2.1.122.1.3.1.2

(tePathName)

Name of the TE tunnel's path

No

SnmpAdminString

OCTET STRING (SIZE (0..32))

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.2.1.122.0.3

TE tunnel path change

Informational

-

-

ON

OID (object name)

Description

Index

Type

Value range

1.3.6.1.2.1.122.1.2.1.2

 (teTunnelName)

TE tunnel name

No

SnmpAdminString

OCTET STRING (SIZE (1..32))

1.3.6.1.2.1.122.1.3.1.2 

(tePathName)

Name of the TE tunnel's path

No

SnmpAdminString

OCTET STRING (SIZE (0..32))