RBRIDGE-MIB

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseTrillVersion

(1.3.6.1.2.1.214.1.1.1)

read-only

Unsigned32

Standard MIB values.

Maximum TRILL version number that this RBridge supports.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseNumPorts

(1.3.6.1.2.1.214.1.1.2)

read-only

Unsigned32

Standard MIB values.

Number of ports controlled by an RBridge.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseForwardDelay

(1.3.6.1.2.1.214.1.1.3)

read-write

Unsigned32

Unsigned32 (4..30)

Address entry aging time after an appointed forwarder changes.

Not supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseUniMultipathEnable

(1.3.6.1.2.1.214.1.1.4)

read-write

TruthValue

true(1),

false(2)

Enabling state of unicast TRILL multipathing. true(1) means enabled.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseMultiMultipathEnable

(1.3.6.1.2.1.214.1.1.5)

read-write

TruthValue

true(1),

false(2)

Enabling state of multidestination TRILL multipathing. true(1) means enabled.

The object can only be read.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseAcceptEncapNonadj

(1.3.6.1.2.1.214.1.1.6)

read-write

TruthValue

true(1),

false(2)

Accept TRILL-encapsulated frames from a neighbor with which this RBridge does not have an IS-IS adjacency when the value of this object is true (1).

The object can only be read. The value is fixed at False(2).

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseNicknameNumber

(1.3.6.1.2.1.214.1.1.7)

read-write

Unsigned32

Unsigned32 (1..256)

Number of nicknames this RBridge should acquire.

The object can only be read. The value is fixed at 1.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeDtreePriority

(1.3.6.1.2.1.214.1.7.1)

Read-write

Unsigned32

Unsigned32 (1..65535)

Distribution tree root priority for this RBridge.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeDtreeActiveTrees

(1.3.6.1.2.1.214.1.7.2)

read-only

Unsigned32

Standard MIB values.

Total number of trees being computed by all RBridges in the network.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeDtreeMaxTrees

(1.3.6.1.2.1.214.1.7.3)

read-only

Unsigned32

Standard MIB values.

Maximum number of trees this RBridge can compute.

The value is fixed at 15.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeDtreeDesiredUseTrees

(1.3.6.1.2.1.214.1.7.4)

read-only

Unsigned32

Standard MIB values.

Maximum number of trees this RBridge would like to use for transmission of ingress multi-destination frames.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeTrillMinMtuDesired (1.3.6.1.2.1.214.1.8.1)

read-write

Unsigned32

Standard MIB values.

Desired minimum acceptable inter-RBridge link MTU for the network.

The value range is 512 to 16384.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeTrillSz(1.3.6.1.2.1.214.1.8.2)

read-only

Unsigned32

Standard MIB values.

Minimum acceptable inter-RBridge link size for the network for the proper operation of TRILL IS-IS.

As per the MIB.

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeTrillMaxMtuProbes(1.3.6.1.2.1.214.1.8.3)

read-write

Unsigned32

Unsigned32 (1..255)

Number of failed MTU-probes before the RBridge concludes that a particular MTU is not supported by a neighbor.

Not supported

Create

Edit/Modify

Delete

Read

Supported

Supported

Supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeBaseNicknameName

(1.3.6.1.2.1.214.1.1.8.1.1)

not-accessible

RbridgeNickname

Standard MIB values.

16-bit abbreviation for an RBridge's 48-bit IS-IS system ID.

As per the MIB.

rbridgeBaseNicknamePriority

(1.3.6.1.2.1.214.1.1.8.1.2)

read-create

Unsigned32

Unsigned32 (0..255)

RBridge's priority to hold this nickname.

In an automatically generated entry, this object cannot be modified.

rbridgeBaseNicknameDtrPriority

(1.3.6.1.2.1.214.1.1.8.1.3)

read-create

Unsigned32

Unsigned32 (1..65535)

Distribution tree root priority for this nickname.

In an automatically generated entry, this object cannot be modified.

rbridgeBaseNicknameType

(1.3.6.1.2.1.214.1.1.8.1.4)

read-only

INTEGER

static(1),

dynamic(2)

Nickname type. The default is static(1).

As per the MIB.

rbridgeBaseNicknameRowStatus

(1.3.6.1.2.1.214.1.1.8.1.5)

read-create

RowStatus

Standard MIB values.

State of the current entry.

Available values are active(1), createAndGo(4), and destroy(6).

An RBridge can have only one such an entry. When a new entry is added, the old entry is overwritten. When an entry is deleted, a new entry is automatically generated.

In an automatically generated entry, this object cannot be deleted.

Create

Edit/Modify

Delete

Read

Supported

Supported

Supported

Supported

rbridgeBasePort (1.3.6.1.2.1.214.1.1.9.1.1)

not-accessible

Unsigned32

Standard MIB values.

Port number of the port for which this entry contains RBridge management information.

As per the MIB.

rbridgeBasePortIfIndex (1.3.6.1.2.1.214.1.1.9.1.2)

read-only

InterfaceIndex

Standard MIB values.

Index of the interface corresponding to this port in the IF-MIB.

As per the MIB.

rbridgeBasePortDisable

(1.3.6.1.2.1.214.1.1.9.1.3)

read-write

TruthValue

true(1),

false(2)

Bit for disabling a port.

When this bit is set (true), all frames received or to be transmitted are discarded, except local frames.

The default is false (2).

Not supported. The value is fixed at false(2).

rbridgeBasePortTrunkPort (1.3.6.1.2.1.214.1.1.9.1.4)

read-write

TruthValue

true(1),

false(2)

Bit for disabling the endpoint service.

When this bit is set (true), all native frames received on the port and all native frames that would have been sent on the port are discarded.

The default is false (2).

The rbridgeBasePortTrunkPort and rbridgeBasePortAccessPort objects cannot be both set to false(2).

rbridgeBasePortAccessPort (1.3.6.1.2.1.214.1.1.9.1.5)

read-write

TruthValue

true(1),

false(2)

Bit for disabling TRILL traffic.

If this bit is set to true(1), the port does not send any TRILL frames except TRILL-Hello frames. 

The default is false (2).

The default is true (1).

The rbridgeBasePortTrunkPort and rbridgeBasePortAccessPort objects cannot be both set to false(2).

rbridgeBasePortP2pHellos (1.3.6.1.2.1.214.1.1.9.1.6)

read-write

TruthValue

true(1),

false(2)

Point-to-point (P2P) Hellos bit.

If this bit is set to true(1), the port sends IS-IS Hello frames rather than TRILL HELLO frames (default).

The default is false (2).

Not supported. The value is fixed at false(2).

rbridgeBasePortState (1.3.6.1.2.1.214.1.1.9.1.7)

read-only

INTEGER

uninhibited(1),

portInhibited(2),

vlanInhibited(3),

disabled(4),

broken(5)

Current state of a port.

As per the MIB.

rbridgeBasePortInhibitionTime (1.3.6.1.2.1.214.1.1.9.1.8)

read-write

Unsigned32

Standard MIB values.

Time in seconds that this RBridge will inhibit forwarding on this port after it observes a spanning tree root bridge change on a link or receives conflicting VLAN forwarder information.

The default is 30.

The value range is 0 to 30.

rbridgeBasePortDisableLearning (1.3.6.1.2.1.214.1.1.9.1.9)

read-write

TruthValue

true(1),

false(2)

Set this object to true(1) to disable learning of MAC addresses seen on this port.

Not supported. The value is fixed at false(2).

rbridgeBasePortDesiredDesigVlan (1.3.6.1.2.1.214.1.1.9.1.10)

read-write

VlanId

Standard MIB values.

VLAN that a Designated RBridge (DRB) will specify in its TRILL-Hellos as the VLAN to be used by all RBridges on the link for TRILL frames. 

The default is that of rbridgeBasePortDesigVlan.

rbridgeBasePortDesigVlan (1.3.6.1.2.1.214.1.1.9.1.11)

read-only

VlanId

Standard MIB values.

VLAN being used on this link for TRILL frames.

The object does not return any value when the port state is down or no VLAN is enabled.

rbridgeBasePortStpRoot (1.3.6.1.2.1.214.1.1.9.1.12)

read-only

BridgeId

Standard MIB values.

Bridge identifier of the root of the spanning tree learned from a Bridge PDU (BPDU) received on this port.

As per the MIB.

rbridgeBasePortStpRootChanges (1.3.6.1.2.1.214.1.1.9.1.13)

read-only

Counter32

Standard MIB values.

Number of times a change in the root bridge is seen from spanning tree BPDUs received on this port, indicating a change in bridged LAN topology.

As per the MIB.

rbridgeBasePortStpWiringCloset (1.3.6.1.2.1.214.1.1.9.1.14)

read-write

BridgeId

Standard MIB values.

Bridge ID to be used as the spanning tree root in BPDUs.

Not supported. The value is fixed at 0.

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeFdbId

(1.3.6.1.2.1.214.1.2.4.1.1)

not-accessible

Unsigned32

Unsigned32 (0..4294967295)

ID of this filtering database.

As per the MIB.

rbridgeUniFdbAddr

(1.3.6.1.2.1.214.1.2.4.1.2)

not-accessible

MacAddress

Standard MIB values.

MAC address for which the device has forwarding information.

As per the MIB.

rbridgeUniFdbPort

(1.3.6.1.2.1.214.1.2.4.1.3)

read-only

Unsigned32

Unsigned32 (0..65535)

Port number corresponding the address of rbridgeUniFdbAddr.

The value 0 indicates no port number is learned.

Not supported. The value is fixed at 0.

rbridgeUniFdbNickname

(1.3.6.1.2.1.214.1.2.4.1.4)

read-only

RbridgeNickname

Standard MIB values.

RBridge nickname that is placed in the egress nickname field of a TRILL frame sent to the current address.

As per the MIB.

rbridgeUniFdbConfidence

(1.3.6.1.2.1.214.1.2.4.1.5)

read-only

Unsigned32

Unsigned32 (0..255)

Confidence level associated with this entry.

Not supported. The value is fixed at 0.

rbridgeUniFdbStatus

(1.3.6.1.2.1.214.1.2.4.1.6)

read-only

INTEGER

other(1),

invalid(2),

learned(3),

self(4),

mgmt(5),

esadi(6)

State of the current entry.

As per the MIB.

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

rbridgeUniFibNickname

(1.3.6.1.2.1.214.1.2.5.1.1)

not-accessible

RbridgeNickname

Standard MIB values.

RBridge nickname for which this RBridge has forwarding information.

As per the MIB.

rbridgeUniFibPort

(1.3.6.1.2.1.214.1.2.5.1.2)

not-accessible

Unsigned32

Unsigned32 (0..65535)

RBridge port number of the corresponding RBridge.

As per the MIB.

rbridgeUniFibNextHop

(1.3.6.1.2.1.214.1.2.5.1.3)

not-accessible

RbridgeNickname

Standard MIB values.

Nickname of the next-hop RBridge for the path towards the RBridge whose nickname is specified in this entry.

As per the MIB.

rbridgeUniFibHopCount

(1.3.6.1.2.1.214.1.2.5.1.4)

read-only

Unsigned32

Standard MIB values.

Hop count from this ingress RBridge to the egress RBridge.

As per the MIB.

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeMultiFibNickname (1.3.6.1.2.1.214.1.2.6.1.1)

not-accessible

RbridgeNickname

Standard MIB values.

Nickname of the multicast distribution tree.

As per the MIB.

rbridgeMultiFibPorts (1.3.6.1.2.1.214.1.2.6.1.2)

read-only

PortList

Standard MIB values.

List of ports to which a frame destined to this multicast distribution tree is flooded.

As per the MIB.

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeVlanIndex (1.3.6.1.2.1.214.1.3.1.1.1)

not-accessiable

Unsigned32

Unsigned32 (1..4094|4096..4294967295)

ID of a VLAN.

As per the MIB.

rbridgeVlanForwarderLosts (1.3.6.1.2.1.214.1.3.1.1.2)

read-only

Counter32

Standard MIB values.

 Number of times this RBridge has lost appointed forwarder status for this VLAN on any of its ports.

Not supported. The value is fixed at 0.

rbridgeVlanDisableLearning (1.3.6.1.2.1.214.1.3.1.1.3)

read-write

TruthValue

true(1),

false(2)

Set this object to true(1) to disable learning of MAC addresses in this VLAN.

Not supported. The value is fixed at false(2).

rbridgeVlanSnooping (1.3.6.1.2.1.214.1.3.1.1.4)

read-only

INTEGER

notSupported(1),

ipv4(2),

ipv6(3),

ipv4v6(4)

IP multicast snooping on this VLAN.

As per the MIB.

Create

Edit/Modify

Delete

Read

Supported

Supported

Supported

Supported

rbridgeVlanPortInhibited (1.3.6.1.2.1.214.1.3.2.1.1)

read-only

TruthValue

true(1),

false(2)

Setting this object to true(1) means this VLAN has been inhibited by the RBridge due to conflicting forwarder information received from another RBridge.

As per the MIB.

rbridgeVlanPortForwarder (1.3.6.1.2.1.214.1.3.2.1.2)

read-only

TruthValue

true(1),

false(2)

Setting this object to true(1) means this RBridge is an appointed forwarder for this VLAN on this port.

As per the MIB.

rbridgeVlanPortAnnouncing (1.3.6.1.2.1.214.1.3.2.1.3)

read-write

TruthValue

true(1),

false(2)

Setting this object to true(1) means TRILL Hellos tagged with this VLAN can be sent by this RBridge on this port.

As per the MIB.

rbridgeVlanPortDetectedVlanMapping (1.3.6.1.2.1.214.1.3.2.1.4)

read-only

TruthValue

true(1),

false(2)

Setting this object to true(1) means VLAN mapping has been detected on the link attached to this port.

Not supported. The value is fixed at false(2).

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeSnoopingPortAddrType

(1.3.6.1.2.1.214.1.6.1.1.1)

read-only

INTEGER

ipv4(1),

ipv6(2),

ipv4v6(3)

IP address type of an IP multicast router detected on this port and VLAN.

As per the MIB.

Create

Edit/Modify

Delete

Read

Supported

Supported

Supported

Supported

Object (OID)

Access

Syntax

Value range

Description

Implementation

rbridgeDtreeNumber  (1.3.6.1.2.1.214.1.7.5.1.1)

not-accessible

Unsigned32

Unsigned32 (0..65535)

Number of trees in a distribution tree computed by this RBridge.

As per the MIB.

rbridgeDtreeNickname (1.3.6.1.2.1.214.1.7.5.1.2)

read-only

RbridgeNickname

Standard MIB values.

Nickname of the distribution tree.

As per the MIB.

rbridgeDtreeIngress(1.3.6.1.2.1.214.1.7.5.1.3)

read-only

TruthValue

true(1),

false(2)

Indicates whether this RBridge might choose this distribution tree to receive a multi-destination frame.

The value is fixed at true(1).