IEEE8021-CFM-MIB

Object (OID)

Access

Syntax

Value range

Description

Implementation

dot1agCfmMdTableNextIndex (1.3.111.2.802.1.1.8.1.5.1)

read-only

Dot1afCfmIndexIntegerNextFree

Unsigned32 (1..4294967295)

Value to be used as a new index in the MD table.

As per the MIB.

·     The dot1agCfmMdIndex index must be configured. The index is provided by the dot1agCfmMdTableNextIndex object.

·     The dot1agCfmMdMdLevel object must be configured.

·     The dot1agCfmMdFormat object is optional. If it is not configured, the default value is charString(4).

·     The dot1agCfmMdName object is optional. When the dot1agCfmMdFormat object is set to none(1), the MIB will automatically ignore the input value no matter whether the dot1agCfmMdName object is configured. When the dot1agCfmMdFormat object is set to any other value, you must configure the dot1agCfmMdName object, and the MIB will read the input value.

·     The dot1agCfmMdMhfCreation object is optional. If it is not configured, the default value is defMHFnone(1), and only the value is available.

·     The dot1agCfmMdMhfIdPermission object is optional. If it is not configured, the default value is sendIdNone(1), and only the value is available.

Not supported

Supported

Supported

dot1agCfmMdIndex (1.3.111.2.802.1.1.8.1.5.2.1.1)

not-accessible

Unsigned32

Unsigned32(1..4294967295)

MD table index.

As per the MIB.

dot1agCfmMdFormat (1.3.111.2.802.1.1.8.1.5.2.1.2)

read-create

Dot1agCfmMaintDomainNameType

INTEGER {

none (1)

dnsLikeName(2)

macAddressAndUint (3)

charString (4)

}

MD name type.

As per the MIB.

dot1agCfmMdName (1.3.111.2.802.1.1.8.1.5.2.1.3)

read-create

Dot1agCfmMaintDomainName

OCTET STRING(1..43)

MD name.

The MD name must be unique. After an MD is created, its name cannot be modified. When the format is set to macAddressAndUint(3), you must enter eight bytes, where the first fix bytes specify the MAC address and the last two bytes specify the subnumber.

dot1agCfmMdMdLevel (1.3.111.2.802.1.1.8.1.5.2.1.4)

read-create

Dot1agCfmMDLevel

Integer32 (0..7)

MD level.

Eight MD levels are available, 0 to 7. The MD level cannot be modified after an MD is created.

dot1agCfmMdMhfCreation (1.3.111.2.802.1.1.8.1.5.2.1.5)

read-create

Dot1agCfmMhfCreation

INTEGER {

defMHFnone(1),

defMHFdefault(2),

defMHFexplicit(3)

}

Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this MD.

This object is insignificant. This object cannot be modified after an MD is created. The default is defMHFnone(1), and only the value is supported.

dot1agCfmMdMhfIdPermission (1.3.111.2.802.1.1.8.1.5.2.1.6)

read-create

Dot1agCfmIdPermission

INTEGER {

sendIdNone(1),

sendIdChassis(2),

sendIdManage(3),

sendIdChassisManage(4)

}

Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MD. 

The default value is sendIdNone(1), and only the value is available.

dot1agCfmMdMaNextIndex (1.3.111.2.802.1.1.8.1.5.2.1.7)

read-only

Dot1afCfmIndexIntegerNextFree,

Unsigned32 (1..4294967295)

Index of the next MA to be created.

As per the MIB.

dot1agCfmMdRowStatus (1.3.111.2.802.1.1.8.1.5.2.1.8)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Available values are active(1), createAndGo(4), and destroy(6).

Create

Edit/Modify

Delete

Read

·     The dot1agCfmMdIndex must be configured. The index is provided by dot1agCfmMdIndex in the dot1agCfmMdTable object.

·     The dot1agCfmMaIndex and dot1agCfmMaNetName indexes are required. When configuring the dot1agCfmMaIndex index, the index is provided by the dot1agCfmMdMaNextIndex in the dot1agCfmMdTable table. When you use the dot1agCfmMaNetName object to configure a name, the name can contain only digits, letters, and underscores (_).

·     The dot1agCfmMaNetFormat object must be configured.

·     The dot1agCfmMaNetCcmInterval object is optional. If it is not configured, the default value is interval1s (4).

Only the dot1agCfmMaNetCcmInterval object value can be modified.

The values of the other objects cannot be modified. To modify them, first delete this row, and then create a new one.

Supported

Supported

dot1agCfmMaIndex (1.3.111.2.802.1.1.8.1.6.1.1.1)

not-accessible

Unsigned32

Unsigned32(1..4294967295)

MA index.

This object cannot be modified after being created.

dot1agCfmMaNetFormat (1.3.111.2.802.1.1.8.1.6.1.1.2)

read-create

Dot1agCfmMaintAssocNameType

INTEGER {

primaryVid (1),

charString (2),

unsignedInt16 (3), iccFormat (32)

}

MA name format.

This object cannot be modified after being created.

dot1agCfmMaNetName (1.3.111.2.802.1.1.8.1.6.1.1.3)

read-create

Dot1agCfmMaintAssocName

OCTET STRING (1..45)

MA name.

This object cannot be modified after being created. The total length of the MA name and its MD name cannot exceed 44 bytes.

dot1agCfmMaNetCcmInterval (1.3.111.2.802.1.1.8.1.6.1.1.4)

read-create

Dot1agCfmCcmInterval

INTEGER {

intervalInvalid (0),

interval300Hz (1),

interval10ms (2),

interval100ms (3),

interval1s (4),

interval10s (5),

interval1min (6),

interval10min (7)

}

CCM transmission interval.

As per the MIB.

dot1agCfmMaNetRowStatus (1.3.111.2.802.1.1.8.1.6.1.1.5)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Available values are active(1), createAndGo(4), and destroy(6).

Create

Edit/Modify

Delete

Read

·     The dot1agCfmMdIndex must be configured. The index is provided by the dot1agCfmMdIndex in the dot1agCfmMdTable object.

·     The dot1agCfmMaIndex must be configured. The index is provided by the dot1agCfmMaIndex in the dot1agCfmMaNetTable object.

·     The dot1agCfmMaMepListIdentifier object must be configured.

Not supported

Supported

Supported

dot1agCfmMaMepListIdentifier (1.3.111.2.802.1.1.8.1.6.3.1.1)

not-accessible

Dot1agCfmMepId

Unsigned32 (1..8191)

MEP ID.

This object cannot be modified after being created.

dot1agCfmMaMepListRowStatus (1.3.111.2.802.1.1.8.1.6.3.1.2)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Available values are active(1), createAndGo(4), and destroy(6).

Create

Edit/Modify

Delete

Read

·     The dot1agCfmMdIndex must be configured. The index is provided by the dot1agCfmMdIndex in the dot1agCfmMdTable object.

·     The dot1agCfmMaIndex must be configured. The index is provided by the dot1dot1agCfmMaIndex in the dot1agCfmMaNetTable object.

·     Indexes dot1agCfmMepIdentifier and dot1agCfmMepIfIndex and non-index dot1agCfmMepDirection must be configured.

The dot1agCfmMepActive and dot1agCfmMepCciEnabled object values can be modified.

The values of the other objects cannot be modified. To modify them, first delete this row, and then create a new one.

Supported

Supported

dot1agCfmMepIdentifier (1.3.111.2.802.1.1.8.1.7.1.1.1)

not-accessible

Dot1agCfmMepId

Unsigned32 (1..8191)

MEP ID.

This object cannot be modified after being created.

dot1agCfmMepIfIndex (1.3.111.2.802.1.1.8.1.7.1.1.2)

read-create

InterfaceIndexOrZero

Integer32 (0..2147483647)

Interface index of an MEP.

As per the MIB.

dot1agCfmMepDirection (1.3.111.2.802.1.1.8.1.7.1.1.3)

read-create

Dot1agCfmMpDirection

INTEGER {

down  (1),

up (2)

}

MEP direction.

This object cannot be modified after being created.

dot1agCfmMepPrimaryVid (1.3.111.2.802.1.1.8.1.7.1.1.4)

read-create

Unsigned32

Unsigned32(0..16777215)

VLAN of the MEP.

The value 0 indicates that either the primary VID is that of the MEP's MA, or that the MEP's MA is associated with no VID.

dot1agCfmMepActive (1.3.111.2.802.1.1.8.1.7.1.1.5)

read-create

TruthValue

true(1),

false(2)

Enabling state of the MEP.

The value must be true (1), and cannot be modified once the MEP is created.

dot1agCfmMepFngState (1.3.111.2.802.1.1.8.1.7.1.1.6)

read-only

Dot1agCfmFngState

INTEGER {

fngReset (1),

fngDefect (2),

fngReportDefect (3),

fngDefectReported(4),

fngDefectClearing(5)

}

FNG state machine state of the MEP.

As per the MIB.

dot1agCfmMepCciEnabled (1.3.111.2.802.1.1.8.1.7.1.1.7)

read-create

TruthValue

true(1),

false(2)

Whether to enable the MEP to send CCM packets.

As per the MIB.

dot1agCfmMepCcmLtmPriority (1.3.111.2.802.1.1.8.1.7.1.1.8)

read-create

Unsigned32

Unsigned32(0..7)

Priority of CCM packets sent by the MEP.

Not supported

dot1agCfmMepMacAddress (1.3.111.2.802.1.1.8.1.7.1.1.9)

read-only

MacAddress

OCTET STRING(6)

MEP MAC address.

Not supported

dot1agCfmMepLowPrDef (1.3.111.2.802.1.1.8.1.7.1.1.10)

read-create

Dot1agCfmLowestAlarmPri

INTEGER {

allDef (1), 

macRemErrXcon(2),

remErrXcon (3),

errXcon (4),

 xcon (5),

noXcon (6)

}

Lowest priority defect that is allowed to generate fault alarms.

Not supported

dot1agCfmMepFngAlarmTime (1.3.111.2.802.1.1.8.1.7.1.1.11)

read-create

TimeInterval

250..1000

The time that defects must be present before a fault alarm is issued.

Not supported

dot1agCfmMepFngResetTime (1.3.111.2.802.1.1.8.1.7.1.1.12)

read-create

TimeInterval

250..1000

The time that defects must be absent before resetting a fault alarm.

Not supported

dot1agCfmMepHighestPrDefect (1.3.111.2.802.1.1.8.1.7.1.1.13)

read-only

Dot1agCfmHighestDefectPri

INTEGER {

none  (0),

defRDICCM (1),            

defMACstatus  (2), 

defRemoteCCM (3),

defErrorCCM (4), 

defXconCCM  (5)

}

Highest-priority fault of the MEP.

In the current software version, only fault types defRemoteCCM(3), defErrorCCM(4), and defXconCCM (5) are supported.

dot1agCfmMepDefects (1.3.111.2.802.1.1.8.1.7.1.1.14)

read-only

Dot1agCfmMepDefects

BITS {             bDefRDICCM(0),

             bDefMACstatus(1),   

bDefRemoteCCM(2),

bDefErrorCCM(3),

bDefXconCCM(4)

}

MEP fault state.

Not supported

dot1agCfmMepErrorCcmLastFailure (1.3.111.2.802.1.1.8.1.7.1.1.15)

read-only

OCTET STRING

OCTET STRING (1..1522)

Last-received CCM packet that triggered a DefError CCM fault.

Not supported

dot1agCfmMepXconCcmLastFailure (1.3.111.2.802.1.1.8.1.7.1.1.16)

read-only

OCTET STRING

OCTET STRING (1..1522)

Last-received CCM packet that triggered a DefXcon CCM fault.

Not supported

dot1agCfmMepCcmSequenceErrors (1.3.111.2.802.1.1.8.1.7.1.1.17)

read-only

Counter32

Standard MIB values.

Total number of out-of-sequence CCM packets received.

Not supported

dot1agCfmMepCciSentCcms (1.3.111.2.802.1.1.8.1.7.1.1.18)

read-only

Counter32

Standard MIB values.

Total number of CCM packets sent.

Not supported

dot1agCfmMepNextLbmTransId (1.3.111.2.802.1.1.8.1.7.1.1.19)

read-only

Unsigned32

Standard MIB values.

Next sequence number.

Not supported

dot1agCfmMepLbrIn (1.3.111.2.802.1.1.8.1.7.1.1.20)

read-only

Counter32

Standard MIB values.

Total number of LBR packets received.

Not supported

dot1agCfmMepLbrInOutOfOrder (1.3.111.2.802.1.1.8.1.7.1.1.21)

read-only

Counter32

Standard MIB values.

Total number of out-of-sequence LBR packets received.

Not supported

dot1agCfmMepLbrBadMsdu (1.3.111.2.802.1.1.8.1.7.1.1.22)

read-only

Counter32

Standard MIB values.

Total number of bad LBR packets.

Not supported

dot1agCfmMepLtmNextSeqNumber (1.3.111.2.802.1.1.8.1.7.1.1.23)

read-only

Unsigned32

Standard MIB values.

Next sequence number of the LT packet.

Not supported

dot1agCfmMepUnexpLtrIn (1.3.111.2.802.1.1.8.1.7.1.1.24)

read-only

Counter32

Standard MIB values.

Total number of LTR packets

Not supported

dot1agCfmMepLbrOut (1.3.111.2.802.1.1.8.1.7.1.1.25)

read-only

Counter32

Standard MIB values.

Total number of LBR packets sent.

Not supported

dot1agCfmMepTransmitLbmStatus (1.3.111.2.802.1.1.8.1.7.1.1.26)

read-create

TruthValue

true(1),

false(2)

Whether to forward LBM packets.

Not supported

dot1agCfmMepTransmitLbmDestMacAddress (1.3.111.2.802.1.1.8.1.7.1.1.27)

read-create

MacAddress

OCTET STRING(6)

Destination MAC address of LBM packets.

Not supported

dot1agCfmMepTransmitLbmDestMepId (1.3.111.2.802.1.1.8.1.7.1.1.28)

read-create

Dot1agCfmMepIdOrZero

Integer32 (0..2147483647)

MEP ID.

Not supported

dot1agCfmMepTransmitLbmDestIsMepId (1.3.111.2.802.1.1.8.1.7.1.1.29)

read-create

TruthValue

true(1),

false(2)

Whether the LBM packets are transmitted by using the MEP ID or destination MAC address.

Not supported

dot1agCfmMepTransmitLbmMessages (1.3.111.2.802.1.1.8.1.7.1.1.30)

read-create

Integer32

Integer32(1..1024)

Total number of LBM packets sent.

Not supported

dot1agCfmMepTransmitLbmDataTlv (1.3.111.2.802.1.1.8.1.7.1.1.31)

read-create

OCTET STRING

OCTET STRING (0..1500)

Data in TLVs.

Not supported

dot1agCfmMepTransmitLbmVlanPriority (1.3.111.2.802.1.1.8.1.7.1.1.32)

read-create

Integer32

OCTET STRING (0..7)

Priority.

Not supported

dot1agCfmMepTransmitLbmVlanDropEnable (1.3.111.2.802.1.1.8.1.7.1.1.33)

read-create

TruthValue

true(1),

false(2)

Whether to enable dropping packets.

Not supported

dot1agCfmMepTransmitLbmResultOK (1.3.111.2.802.1.1.8.1.7.1.1.34)

read-only

TruthValue

true(1),

false(2)

Whether to send LBM packets.

Not supported

dot1agCfmMepTransmitLbmSeqNumber (1.3.111.2.802.1.1.8.1.7.1.1.35)

read-only

Unsigned32

Standard MIB values.

ID of the first LBM packet sent.

Not supported

dot1agCfmMepTransmitLtmStatus (1.3.111.2.802.1.1.8.1.7.1.1.36)

read-create

TruthValue

true(1),

false(2)

Whether to send the next LTM packet.

Not supported

dot1agCfmMepTransmitLtmFlags (1.3.111.2.802.1.1.8.1.7.1.1.37)

read-create

BITS

useFDBonly (0)

Flag field in LTM packets.

Not supported

dot1agCfmMepTransmitLtmTargetMacAddress (1.3.111.2.802.1.1.8.1.7.1.1.38)

read-create

MacAddress

OCTET STRING(6)

Destination MAC address.

Not supported

dot1agCfmMepTransmitLtmTargetMepId (1.3.111.2.802.1.1.8.1.7.1.1.39)

read-create

Dot1agCfmMepIdOrZero

Integer32 (0..2147483647)

Whether the sent packets carry the destination MAC address.

Not supported

dot1agCfmMepTransmitLtmTargetIsMepId (1.3.111.2.802.1.1.8.1.7.1.1.40)

read-create

TruthValue

true(1),

false(2)

Whether the LTM packets use the MEP ID.

Not supported

dot1agCfmMepTransmitLtmTtl (1.3.111.2.802.1.1.8.1.7.1.1.41)

read-create

Unsigned32

Unsigned32(0..255)

TTL

Not supported

dot1agCfmMepTransmitLtmResult (1.3.111.2.802.1.1.8.1.7.1.1.42)

read-only

TruthValue

true(1),

false(2)

Whether to send LTM packets.

Not supported

dot1agCfmMepTransmitLtmSeqNumber (1.3.111.2.802.1.1.8.1.7.1.1.43)

read-only

Unsigned32

Standard MIB values.

LTM transaction identifier of the LTM sent.

Not supported

dot1agCfmMepTransmitLtmEgressIdentifier (1.3.111.2.802.1.1.8.1.7.1.1.44)

read-create

OCTET STRING

OCTET STRING(8)

ID of the egress of the LTM packets.

Not supported

dot1agCfmMepRowStatus (1.3.111.2.802.1.1.8.1.7.1.1.45)

read-create

RowStatus

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

Row status.

Available values are active(1), createAndGo(4), and destroy(6).

dot1agCfmMepPbbTeCanReportPbbTePresence (1.3.111.2.802.1.1.8.1.7.1.1.46)

read-create

TruthValue

true(1),

false(2)

Whether the PBB-TE reporting capability is supported.

Not supported

dot1agCfmMepPbbTeTrafficMismatchDefect (1.3.111.2.802.1.1.8.1.7.1.1.47)

read-only

TruthValue

true(1),

false(2)

Whether traffic mismatch errors have been detected.

Not supported

dot1agCfmMepPbbTransmitLbmLtmReverseVid (1.3.111.2.802.1.1.8.1.7.1.1.48)

read-create

IEEE8021VlanIndex

Unsigned32 (1..4094|4096..4294967295)

PBB VID carried in LTM packets.

Not supported

dot1agCfmMepPbbTeMismatchAlarm      (1.3.111.2.802.1.1.8.1.7.1.1.49)

read-create

TruthValue

true(1),

false(2)

Whether PBB-TE errors or PBB-TE alarms are detected.

Not supported

dot1agCfmMepPbbTeLocalMismatchDefect (1.3.111.2.802.1.1.8.1.7.1.1.50)

read-only

TruthValue

true(1),

false(2)

Whether local PBB-TE errors have been detected.

Not supported

dot1agCfmMepPbbTeLocalMismatchSinceReset (1.3.111.2.802.1.1.8.1.7.1.1.51)

read-only

TruthValue

true(1),

false(2)

Whether the local PBB-TE errors start from the reset state.

Not supported