Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 01-Text | 1.06 MB |
Chassis views and technical specifications
LED descriptions for single-LED APs
LED descriptions for multi-LED APs
LED description for the reset button
Product overview
The WA6100 AP series includes the following models:
Table 1 WA6100 AP series
|
Product code |
Product model |
Remarks |
|
EWP-WA6120 |
WA6120 |
Indoor AP |
|
EWP-WA6120H |
WA6120H |
|
|
EWP-WA6126 |
WA6126 |
|
|
EWP-WA6120X |
WA6120X |
Outdoor AP |
Chassis views and technical specifications
WA6120
Chassis view
Chassis view
Figure 1 Chassis view
Chassis dimensions
Figure 2 Chassis dimensions
Ports
The AP provides the following ports:
· One console port.
· One GE/PoE port.
· One power port.
The AP also has a reset button and a security slot. The security slot is 7 × 3 mm (0.28 × 0.12 in) in size.
Figure 3 Ports on the AP
|
(1) Security slot |
(2) GE/PoE port |
|
(3) Power port |
|
Figure 4 Left view
|
(1) Reset button |
(2) Console port |
Technical specifications
Table 2 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
32 × 180 × 180 mm (1.26 × 7.09 × 7.09 in), mounting bracket excluded |
|
Weight |
500g |
|
Power consumption |
· Standby: 5.4W · Operating: ≤ 12.95 W |
|
Antenna |
Built-in antenna: · 2.4 GHz: 3 dBi gain · 5.0 GHz: 4 dBi gain |
|
Protocol |
· IEEE802.11a/b/g/n/ac/ax · IEEE802.3af |
|
Operating temperature |
-10°C to +55°C (14°F to 131°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
5% RH to 95% RH, noncondensing |
|
Storage humidity |
5% RH to 95% RH, noncondensing |
|
Protection class |
IP41 |
|
Console port |
Used by technical personnel only for device configuration and management. |
|
GE/PoE |
100/1000M Ethernet copper port, used for connecting the AP to an uplink device for Internet or MAN access. It can also receive PoE power from the uplink device. When the AP operates in fit mode, the port is represented by interface number GE1/0/1 in the MAP file and GigabitEthernet 1 for configuration on the AC. |
|
54V DC |
Power port, used for receiving +54 VDC power from a local power source. |
|
Reset button |
The function of the reset button varies by duration in which it is pressed. For more information, see "LED description for the reset button." |
|
LEDs |
Yellow/green/blue. For more information about the LED status in different AP operating modes, see "LED descriptions for single-LED APs" |
WA6120H
Chassis view
Chassis view
Figure 5 Chassis view
Chassis dimensions
Figure 6 Chassis dimensions
Ports
The AP provides the following ports:
· One console port
· Four 10/100/1000M Ethernet copper ports
· One 54 VDC power port
· One Uplink/PoE port
· One USB port
It also provides a reset button (RST).
Figure 7 Ports on the AP
|
(1) 10/100/1000M Ethernet copper ports |
Figure 8 Left view
|
(1) Reset button (RST) |
(2) Console port |
(3) USB port |
Figure 9 Rear view
|
(1) Uplink/PoE port |
(2) 54 VDC power port |
Technical specifications
Table 3 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
39 × 86 × 160 mm (1.54 × 3.39 × 6.30 in, excluding the mounting bracket) |
|
Weight |
350 g (12.35 oz) |
|
· Standby: 6.3 W · Operating: ¡ ≤ 32.06 W (PoE_OUT/USB included) ¡ ≤ 14.56 W (PoE_OUT/USB excluded) |
|
|
Antenna |
Built-in antenna: · 2.4 GHz: 3 dBi gain · 5 GHz: 5 dBi gain |
|
Standards |
· 802.11ax, 802.11ac, 802.11n · 802.3af |
|
Operating temperature |
-10°C to 55°C (14°F to 131°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
5% RH to 95% RH, noncondensing |
|
Storage humidity |
5% RH to 95% RH, noncondensing |
|
Protection class |
IP41 |
|
Console port |
Used by technical personnel only for device configuration and management. |
|
10/100/1000M Ethernet copper port |
10/100/1000M Ethernet copper port. When the AP operates in fit mode, the ports are represented interface numbers GE1/0/2 to GE1/0/5 in the MAP file and GigabitEthernet 2 to GigabitEthernet 5 on the AC. |
|
Uplink/PoE port |
10/100/1000M Ethernet copper port, used for connecting the AP to an uplink device for Internet or MAN access. It can also receive PoE power from the uplink device. When the AP operates in fit mode, the port is represented by interface number GE1/0/1 in the MAP file and GigabitEthernet 1 on the AC. |
|
Power port (54 V) |
Used for receiving +54 VDC power from a local power source. |
|
USB port |
USB 2.0 |
|
Reset button |
The function of the reset button varies by duration in which it is pressed. For more information, see "LED description for the reset button." |
|
LEDs |
Yellow/green. For more information about the LED status in different AP operating modes, see "LED descriptions for multi-LED APs." |
WA6120X
Chassis view
Chassis view
Figure 10 Chassis view
Chassis dimensions
Figure 11 Chassis dimensions
Ports
The AP provides the following ports:
· Two 100/1000M Ethernet copper ports
· One 54 VDC power port
It also provides a reset button (RST).
Figure 12 Ports on the AP
|
(1) Reset button |
(2) GE1/PoE port |
|
(3) GE2 |
(4) Power port |
|
|
Technical specifications
Table 4 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
250 × 101 × 110 mm (9.84 × 3.98 × 4.33 in) |
|
Weight |
1.1 kg (2.43 lb) |
|
Antenna |
Built-in omnidirectional antenna: · 2.4 G: 3 dBi gain · 5.0 G: 5 dBi gain |
|
Power consumption |
· Standby: 6.28 W · Operating: ≤ 16.32 W |
|
Protocol |
IEEE802.11a/b/g/n/ac/ax |
|
Operating temperature |
–30°C to +55°C (–22°F to +131°F) |
|
Storage temperature |
–40°C to +85°C (–40°F to +185°F) |
|
Operating humidity |
0% RH to 100% RH, noncondensing |
|
Storage humidity |
0% RH to 100% RH, noncondensing |
|
Protection class |
IP67 |
|
GE1/PoE |
10/100/1000M Ethernet copper port, which can receive PoE power. The port is represented by interface GE1/0/1 in the MAP file and GigabitEthernet 1 for configuration on the AC. |
|
GE2 |
10/100/1000M Ethernet copper port. The port is represented by interface GE1/0/2 in the MAP file and GigabitEthernet 2 for configuration on the AC. |
|
DC54V |
Power port, used for receiving +54V power from a local power source. |
|
Reset button |
The function of the reset button varies by duration in which it is pressed. For more information, see "LED description for the reset button." |
|
LEDs |
Yellow/green/blue. For more information about the LED status in different AP operating modes, see "LED descriptions for single-LED APs." |
WA6126
Chassis view
Chassis view
Figure 13 Chassis view
Chassis dimensions
Figure 14 Chassis dimensions
Ports
The AP provides the following ports:
· One console port
· One 10/100/1000M Ethernet copper port
· One 100/1000/2500M Ethernet copper port
· One 54 VDC power port
· One USB port
Figure 15 Ports on the AP
|
(1) Reset button |
(2) USB port |
|
(3) Console port |
(4) 10/100/1000M Ethernet copper port |
|
(5) 100/1000/2500M Ethernet copper port |
(6) Power port |
Technical specifications
Table 5 Technical specifications
|
Item |
Description |
|
Dimensions (H × W × D) |
35 × 185 × 185 mm (1.38 × 7.28 × 7.28 in) |
|
Weight |
650 g (22.93 oz) |
|
Power consumption |
· Standby: 7 W · Operating:≤ 17.6 W (USB excluded) |
|
Antenna |
Built-in omnidirectional antenna: · 2.4 GHz: 4 dBi gain · 5 GHz: 4 dBi gain |
|
Protocol |
· IEEE802.11a/b/g/n/ac/ax · IEEE802.3at |
|
Operating temperature |
–10°C to +55°C (32°F to 113°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +185°F) |
|
Operating humidity |
5% RH to 95% RH, noncondensing |
|
Storage humidity |
5% RH to 95% RH, noncondensing |
|
Protection class |
IP41 |
|
Console port |
Used by technical personnel only for device configuration and management. |
|
2.5GE/PoE+ |
100/1000M/2.5G Ethernet copper port, used for connecting the AP to an uplink device for Internet or MAN access. It can also receive PoE power from the uplink device. When the AP operates in fit AP mode, the port is represented by interface number SGE1/0/1 in the MAP file and smartrate-Ethernet 1 for configuration on the AC. |
|
GE |
10/100/1000M Ethernet copper port. When the AP operates in fit AP mode, the port is represented by interface number GE1/0/1 in the MAP file and GigabitEthernet 1 for configuration on the AC. |
|
USB port |
USB 3.0-compliant USB port. |
|
54V DC |
Used for receiving +54 VDC power from a local power source. |
|
Reset button |
The function of the reset button varies by duration in which it is pressed. For more information, see "LED description for the reset button." |
|
LEDs |
Yellow/green/blue. For more information about the LED status in different AP operating modes, see "LED descriptions for single-LED APs." |
About LEDs
The LED status includes the color and flashing frequency of the LEDs, which indicates the AP operating status.
APs can be classified into single-LED APs and multi-LED APs based on the LED quantity.
Figure 16 Single-LED AP (WA6120 as an example)
Figure 17 Multi-LED AP (WA6120H as an example)
|
AP series |
Models |
Description |
|
|
Wi-Fi 6 |
WA6500 AP series |
WA6120, WA6120X, WA6126 |
|
|
WA6120H |
|||
LED descriptions for single-LED APs
The description for the status LED on an AP varies by AP operating mode. For information about the operating modes supported by an AP, see the release notes.
LED descriptions before modification
|
|
NOTE: This section is applicable to the WA6500A AP series in versions earlier than 2616. |
Table 7 LED description (fit mode)
|
LED color |
Status |
Description |
|
N/A |
Off |
No power is present or the LED has been turned off from the CLI. |
|
Yellow |
Steady on |
The AP is initializing, or an initialization exception has occurred. |
|
Flashing (twice per second) |
The Ethernet ports are down and no mesh links are established. |
|
|
Green |
Steady on |
The AP has started up and registered with an AC, but is in standby state (does not have any associated clients). |
|
Flashing (once every two seconds) |
The AP has started up, but has not registered to any AC. |
|
|
Flashing (twice per second) |
The AP is upgrading the image. |
|
|
Blue |
Flashing (once per second) |
The radios have associated clients. |
Table 8 LED description (cloud mode)
|
LED color |
Status |
Description |
|
N/A |
Off |
No power is present or the LED has been turned off from the CLI. |
|
Yellow |
Steady on |
The AP is initializing, or an initialization exception has occurred. |
|
Flashing (twice per second) |
The Ethernet ports are down and no mesh links are established. |
|
|
Green |
Steady on |
The AP is in standby state, has connected to Cloudnet, but does not have any associated clients. |
|
Flashing (once per second) |
The AP has connected to Cloudnet, and the radios have associated clients. |
|
|
Flashing (twice per second) |
The AP is upgrading the image. |
|
|
Blue |
Steady on |
The AP is in standby state, has not connected to Cloudnet, and does not have any associated clients. |
|
Flashing (once per second) |
The AP has not connected to Cloudnet, but the radios have associated clients. |
LED descriptions after modification
|
|
NOTE: This section is applicable to the WA6500A AP series in 2616 and later versions. |
|
LED color |
Status |
Description |
|
N/A |
Off |
No power is present or the LED has been turned off from the CLI. |
|
Yellow |
Steady on |
The AP is initializing, or an initialization exception has occurred. |
|
Flashing (twice per second) |
The Ethernet ports are down and no mesh links are established. |
|
|
Green |
Steady on |
The AP is in standby state and does not have any associated clients. |
|
Flashing (once every two seconds) |
The AP has started up in fit mode, but has not registered to any AC. |
|
|
Flashing (once per second) |
The radios have associated clients. |
|
|
Blue |
Flashing (twice per second) |
The AP is upgrading the image. |
LED descriptions for multi-LED APs
The descriptions for the status LEDs on an AP vary by AP operating mode. For information about the operating modes supported by an AP, see the release notes.
LED descriptions before modification
|
|
NOTE: This section is applicable to the following APs: WA6500A AP series in versions earlier than 2616.. |
|
LED |
Color |
Status |
Description |
|
Power status LED |
N/A |
Off |
No power is present or the LED has been turned off from the CLI. |
|
Yellow |
Steady on |
· The system software is starting. · An initialization exception has occurred. |
|
|
Green |
Flashing (once every two seconds) |
The AP has started up in fit mode, but has not registered to any AC. |
|
|
Flashing (once per second) |
The AP is operating in cloud mode and has connected to Cloudnet. |
||
|
Flashing (twice per second) |
The AP is upgrading the image. |
||
|
Steady on |
The AP is in standby state. (The fit AP has registered with an AC.) |
||
|
Alternating between yellow and green |
Flashing (once per second) |
The AP is operating in cloud mode and has not connected to Cloudnet. |
|
|
Radio status LED |
N/A |
Off |
The radios are disabled or the LED has been turned off from the CLI. |
|
Yellow |
Flashing (once per second) |
A radio has been enabled but does not have associated clients. |
|
|
Green |
Flashing (once per second) |
A radio has associated clients. |
|
|
LED for a copper or fiber Ethernet port (such as a 1000M, 2.5G, 5G, or 10G port) |
N/A |
Off |
No link is present on the port. |
|
Yellow |
Steady on |
Negotiation has succeeded on the port, and the port is operating at a reduced speed. |
|
|
Flashing (once per second) |
The port is operating correctly at a reduced speed. |
||
|
Green |
Steady on |
Negotiation has succeeded on the port, and the port is operating at the maximum speed. |
|
|
Flashing (once per second) |
The port is operating correctly at the maximum speed. |
||
|
PON |
Green |
Steady on |
Normal PON link. |
|
Flashing (once per second) |
The ONU is registering. |
||
|
Off |
The ONU is not registered. |
||
LED descriptions after modification
|
|
NOTE: This section is applicable to the following APs: WA6500A AP series in 2616 and later versions. |
|
LED |
Color |
Status |
Description |
|
Power status LED |
N/A |
Off |
No power is present or the LED has been turned off from the CLI. |
|
Yellow |
Steady on |
· The system software is starting. · An initialization exception has occurred. |
|
|
Green |
Flashing (once every two seconds) |
The AP has started up in fit mode, but has not registered to any AC. |
|
|
Flashing (twice per second) |
The AP is upgrading the image. |
||
|
Steady on |
The AP is in standby state. (The fit AP has registered with an AC.) |
||
|
Radio status LED |
N/A |
Off |
The radios are disabled or the LED has been turned off from the CLI. |
|
Yellow |
Flashing (once per second) |
A radio has been enabled but does not have associated clients. |
|
|
Green |
Flashing (once per second) |
A radio has associated clients. |
|
|
LED for a copper or fiber Ethernet port (such as a 1000M, 2.5G, 5G, or 10G port) |
N/A |
Off |
No link is present on the port. |
|
Yellow |
Steady on |
Negotiation has succeeded on the port, and the port is operating at a reduced speed. |
|
|
Flashing (once per second) |
The port is operating correctly at a reduced speed. |
||
|
Green |
Steady on |
Negotiation has succeeded on the port, and the port is operating at the maximum speed. |
|
|
Flashing (once per second) |
The port is operating correctly at the maximum speed. |
||
|
PON |
Green |
Steady on |
Normal PON link. |
|
Flashing (once per second) |
The ONU is registering. |
||
|
Off |
The ONU is not registered. |
||
LED description for the reset button
Table 12 LED description for the reset button
|
Reset button |
Press and hold duration (seconds) |
LED color |
LED status |
Description |
|
RESET |
0 to 5 |
Green |
Steady on |
Reset the AP. |
|
5 to 20 |
Green |
Flashing (twice per second) |
Restore to the factory defaults. |
|
|
20 to 30 |
Yellow |
Flashing (once every two seconds) |
The AP is operating in fit mode. |
|
|
Flashing (twice per second) |
The AP is operating in anchor AC mode. |
|||
|
Flashing (four times per second) |
The AP is operating in cloud mode. |
|||
|
> 30 |
Yellow |
Flashing (twice per second) |
The AP is operating in anchor AC mode. |
|
|
Flashing (four times per second) |
The AP is operating in cloud mode. |
|||
|
Green |
Flashing (four times per second) |
The AP is switching from fit mode to cloud mode. Note: After you release the button, if the AP has switched from fit mode to cloud mode, it will restart for the new mode to take effect. |