Switch series		Model	Product code (PID)
S5580S-EI switch series	Non-PoE model	S5580S-24T6Y-EI	LS-5580S-24T6X-EI
S5580S-EI switch series	Non-PoE model	S5580S-48T6X-EI	LS-5580S-48T6X-EI
S5580X-EI switch series	Non-PoE model	S5580X-24T6Y-EI	LS-5580X-24T6Y-EI
S5580X-EI switch series	Non-PoE model	S5580X-48T6Y-EI	LS-5580X-48T6Y-EI
S5580X-HI switch series	PoE model	S5580X-32P4X4YC-HI	LS-5580X-32P4X4YC-HI
	PoE model	S5580X-48P4YC-HI	LS-5580X-48P4YC-HI
	Non-PoE model	S5580X-32S8T4X4YC-HI	LS-5580X-32S8T4X4YC-HI
		S5580X-48S4YC-HI	LS-5580X-48S4YC-HI
		S5580X-32T4X4YC-HI	LS-5580X-32T4X4YC-HI
		S5580X-48T4YC-HI	LS-5580X-48T4YC-HI

NOTE:

· Switches of the same model but different PIDs might differ in hardware and software features. You can view the PID of a switch on the label located on its rear panel or top panel.

· To obtain the purchase information, see the data sheet for the switch at https://www.h3c.com/en/Products_and_Solutions/InterConnect/Switches/ and pay attention to the switch lifecycle management announcement at https://www.h3c.com/en/Support/Policy_Dynamics/Management_Strategy/Products_End_of_Life_Announcement/Switches/.

· For information about switch and software compatibility, see the release notes.

Technical specifications for the S5580S-EI and S5580X-EI switches

Table1-2 Technical specifications for the S5580S-EI and S5580X-EI switches

Item	S5580S-24T6X-EI	S5580S-48T6X-EI	S5580X-24T6Y-EI	S5580X-48T6Y-EI
Physical specifications
Dimensions (H × W × D)	43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)	43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)	43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)	43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)
Dimensions (H × W × D, with package materials)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)
Weight (fully configured with power supplies and fan trays)	≤ 4.5 kg (9.92 lb)	≤ 4.5 kg (9.92 lb)	≤ 4.5 kg (9.92 lb)	≤ 4.5 kg (9.92 lb)
Technical specifications
Memory (RAM)	2 GB
Flash	4 GB
Port types and quantity
Console port	1 × serial console port	1 × serial console port	1 × serial console port	1 × serial console port
USB port	1	1	1	1
Management Ethernet port	1	1	1	1
SFP28 port	N/A	N/A	6	6
SFP+ port	6	6	N/A	N/A
SFP port	8 (The eight SFP ports form combo interfaces with the 10/100/1000 BASE-T autosensing Ethernet ports numbered 17 through 24, respectively.)	N/A	8 (The eight SFP ports form combo interfaces with the 10/100/1000 BASE-T autosensing Ethernet ports numbered 17 through 24, respectively.)	N/A
10/100/1000 BASE-T autosensing Ethernet port	24 (The 10/100/1000 BASE-T autosensing Ethernet ports numbered 17 through 24 form combo interfaces with their corresponding SFP ports, respectively.)	48	24 (The 10/100/1000 BASE-T autosensing Ethernet ports numbered 17 through 24 form combo interfaces with their corresponding SFP ports, respectively.)	48
Fan tray, power supply, and expansion card slots
Power supply slot	2, on the rear panel	2, on the rear panel	2, on the rear panel	2, on the rear panel
Fan tray slot	N/A	N/A	2, on the rear panel	2, on the rear panel
Power supply specifications
Power input	AC input, DC input Note: The switch does not support HVDC input. For DC input, you can use a –48 VDC power source in the equipment room or an RPS (H3C RPS1600-A).
Power specifications	See "Removable power supplies"
Power consumption
Power consumption (static) Data collection standard: no load	· Single AC input: 16 W · Single DC input: 20 W · Dual AC inputs: 18 W · Dual DC inputs: 27 W	· Single AC input: 17 W · Single DC input: 20 W · Dual AC inputs: 19 W · Dual DC inputs: 27 W	· Single AC input: 14 W · Single DC input: 18 W · Dual AC inputs: 16 W · Dual DC inputs: 25 W	· Single AC input: 17 W · Single DC input: 21 W · Dual AC inputs: 19 W · Dual DC inputs: 28 W
Power consumption (with typical configuration) Data collection standard: fully configured with copper cables or network cables, at 30% load	· Single AC input: 26 W · Dual AC inputs: 29 W · Single DC input: 29 W · Dual DC inputs: 36 W	· Single AC input: 39 W · Dual AC inputs: 41 W · Single DC input: 40 W · Dual DC inputs: 47 W	· Single AC input: 26 W · Dual AC inputs: 29 W · Single DC input: 28 W · Dual DC inputs: 36 W	· Single AC input: 41 W · Dual AC inputs: 43 W · Single DC input: 41 W · Dual DC inputs: 48 W
Power consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, at 100% load	· Single AC input: 51 W · Single DC input: 52 W · Dual AC inputs: 53 W · Dual DC inputs: 58 W	· Single AC input: 54 W · Single DC input: 49 W · Dual AC inputs: 56 W · Dual DC inputs: 61 W	· Single AC input: 53 W · Single DC input: 54 W · Dual AC inputs: 56 W · Dual DC inputs: 61 W	· Single AC input: 62 W · Single DC input: 61 W · Dual AC inputs: 63 W · Dual DC inputs: 67 W
Thermal consumption
Thermal consumption (static) Data collection standard: no load	· Single AC input: 54 BTU/h · Single DC input: 69 BTU/h · Dual AC inputs: 62 BTU/h · Dual DC inputs: 92 BTU/h	· Single AC input: 58 BTU/h · Single DC input: 69 BTU/h · Dual AC inputs: 65 BTU/h · Dual DC inputs: 92 BTU/h	· Single AC input: 48 BTU/h · Single DC input: 62 BTU/h · Dual AC inputs: 55 BTU/h · Dual DC inputs: 86 BTU/h	· Single AC input: 58 BTU/h · Single DC input: 72 BTU/h · Dual AC inputs: 65 BTU/h · Dual DC inputs: 96 BTU/h
Thermal consumption (typical) Data collection standard: fully configured with copper cables or network cables, at 30% load	· Single AC input: 89 BTU/h · Single DC input: 99 BTU/h · Dual AC inputs: 99 BTU/h · Dual DC inputs: 123 BTU/h	· Single AC input: 133 BTU/h · Single DC input: 140 BTU/h · Dual AC inputs: 137 BTU/h · Dual DC inputs: 161 BTU/h	· Single AC input: 89 BTU/h · Single DC input: 99 BTU/h · Dual AC inputs: 96 BTU/h · Dual DC inputs: 123 BTU/h	· Single AC input: 140 BTU/h · Single DC input: 147 BTU/h · Dual AC inputs: 140 BTU/h · Dual DC inputs: 164 BTU/h
Thermal consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, at 100% load	· Single AC input: 174 BTU/h · Single DC input: 178 BTU/h · Dual AC inputs: 181 BTU/h · Dual DC inputs: 198 BTU/h	· Single AC input: 185 BTU/h · Single DC input: 168 BTU/h · Dual AC inputs: 191 BTU/h · Dual DC inputs: 209 BTU/h	· Single AC input: 181 BTU/h · Single DC input: 185 BTU/h · Dual AC inputs: 191 BTU/h · Dual DC inputs: 209 BTU/h	· Single AC input: 212 BTU/h · Single DC input: 209 BTU/h · Dual AC inputs: 245 BTU/h · Dual DC inputs: 229 BTU/h
Heat dissipation
Heat dissipation method	Air cooling
Ventilation aisle	Fixed fan trays, from the port side to the power supply side		Front-to-rear or rear-to-front airflow, determined by the selected fan tray model
Reliability and availability
Power supply redundancy	1+1
Fan tray redundancy	N/A		Fully configure the switch with fan trays
Hot swapping	Power supplies support hot swapping.		Power supplies and fan trays support hot swapping.
Mean Time Between Failure (MTBF) (year)	120.16	105.7	111.92	101.92
Mean time to repair (MTTR) (hour)	1
Availability	99.999915%	99.9999%	99.999918%	99.99991%
Environment specifications
Sound pressure level at 27°C (80.6°F)	26.6 dB
Altitude	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Operating temperature	–5°C to +50°C (23°F to 122°F) NOTE: The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Relative humidity	5% RH to 95% RH, noncondensing
Compliance
Product compliance	· Safety standards · EMC standards · Environmental and eco-friendly standards

Technical specifications for the S5580X-HI switch series

Table1-3 Technical specifications for S5580X-HI non-PoE models

Item	S5580X-32S8T4X4YC-HI	S5580X-48S4YC-HI	S5580X-32T4X4YC-HI	S5580X-48T4YC-HI
Physical specifications
Dimensions (H × W × D)	44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in)	44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in)	44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in)	44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in)
Dimensions (H × W × D, with package materials)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)	95 × 560 × 542 mm (3.74 × 22.05 × 21.34 in)
Weight (fully configured with power supplies, fan trays, and expansion cards)	≤ 6.6 kg (14.55 lb)	≤ 6.7 kg (14.77 lb)	≤ 6.6 kg (14.55 lb)	≤ 6.7 kg (14.77 lb)
Technical specifications
Memory (RAM)	4 GB
Flash	4 GB
Port types and quantity
Console port	1 × serial console port
USB port	1
Management Ethernet port	1
SFP28 port	4	4	4	4
SFP+ port	4	N/A	4	N/A
SFP port	32 (The SFP ports numbered 25 through 32 form combo interfaces with their corresponding 10/100/1000 BASE-T autosensing Ethernet ports, respectively.)	48	32	N/A
10/100/1000 BASE-T autosensing Ethernet port	8 (The eight 10/100/1000 BASE-T autosensing Ethernet ports form combo interfaces with the SFP ports numbered 25 through 32, respectively.)	N/A	24	48
Fan tray, power supply, and expansion card slots
Expansion card slot	1, on the rear panel	1, on the rear panel	1, on the rear panel	1, on the rear panel
Power supply slot	2, on the rear panel	2, on the rear panel	2, on the rear panel	2, on the rear panel
Fan tray slot	2, on the rear panel	2, on the rear panel	2, on the rear panel	2, on the rear panel
Power supply specifications
Power input	AC input, DC input Note: The switch does not support HVDC input. For DC input, you can use a –48 VDC power source in the equipment room or an RPS (H3C RPS1600-A).
Power specifications	See "Removable power supplies"
Power consumption
Power consumption (static) Data collection standard: no load	· Single AC input: 29 W · Single DC input: 30 W · Dual AC inputs: 36 W · Dual DC inputs: 36 W	· Single AC input: 29 W · Single DC input: 34 W · Dual AC inputs: 36 W · Dual DC inputs: 39 W	· Single AC input: 32 W · Single DC input: 34 W · Dual AC inputs: 39 W · Dual DC inputs: 39 W	· Single AC input: 34 W · Single DC input: 35 W · Dual AC inputs: 42 W · Dual DC inputs: 41 W
Power consumption (with typical configuration) Data collection standard: fully configured with copper cables or network cables, at 30% load	· Single AC input: 54 W · Dual AC inputs: 63 W · Single DC input: 55 W · Dual DC inputs: 61 W	· Single AC input: 44 W · Dual AC inputs: 51 W · Single DC input: 47 W · Dual DC inputs: 52 W	· Single AC input: 50 W · Dual AC inputs: 58 W · Single DC input: 51 W · Dual DC inputs: 57 W	· Single AC input: 55 W · Dual AC inputs: 62 W · Single DC input: 56 W · Dual DC inputs: 61 W
Power consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, at 100% load	· Single AC input: 108 W · Single DC input: 108 W · Dual AC inputs: 112 W · Dual DC inputs: 113 W	· Single AC input: 135 W · Single DC input: 135 W · Dual AC inputs: 139 W · Dual DC inputs: 140 W	· Single AC input: 90 W · Single DC input: 90 W · Dual AC inputs: 96 W · Dual DC inputs: 95 W	· Single AC input: 94 W · Single DC input: 95 W · Dual AC inputs: 100 W · Dual DC inputs: 100 W
Thermal consumption
Thermal consumption (static) Data collection standard: no load	· Single AC input: 98 BTU/h · Dual AC inputs: 122 BTU/h · Single DC input: 102 BTU/h · Dual DC inputs: 122 BTU/h	· Single AC input: 98 BTU/h · Dual AC inputs: 122 BTU/h · Single DC input: 116 BTU/h · Dual DC inputs: 133 BTU/h	· Single AC input: 109 BTU/h · Dual AC inputs: 133 BTU/h · Single DC input: 116 BTU/h · Dual DC inputs: 133 BTU/h	· Single AC input: 116 BTU/h · Dual AC inputs: 143 BTU/h · Single DC input: 139 BTU/h · Dual DC inputs: 139 BTU/h
Thermal consumption (typical) Data collection standard: fully configured with copper cables or network cables, at 30% load	· Single AC input: 184 BTU/h · Dual AC inputs: 214 BTU/h · Single DC input: 187 BTU/h · Dual DC inputs: 208 BTU/h	· Single AC input: 150 BTU/h · Dual AC inputs: 174 BTU/h · Single DC input: 160 BTU/h · Dual DC inputs: 177 BTU/h	· Single AC input: 170 BTU/h · Dual AC inputs: 197 BTU/h · Single DC input: 174 BTU/h · Dual DC inputs: 194 BTU/h	· Single AC input: 187 BTU/h · Dual AC inputs: 211 BTU/h · Single DC input: 208 BTU/h · Dual DC inputs: 208 BTU/h
Thermal consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, at 100% load	· Single AC input: 368 BTU/h · Dual AC inputs: 382 BTU/h · Single DC input: 368 BTU/h · Dual DC inputs: 385 BTU/h	· Single AC input: 460 BTU/h · Dual AC inputs: 474 BTU/h · Single DC input: 460 BTU/h · Dual DC inputs: 477 BTU/h	· Single AC input: 300 BTU/h · Dual AC inputs: 327 BTU/h · Single DC input: 307 BTU/h · Dual DC inputs: 324 BTU/h	· Single AC input: 320 BTU/h · Dual AC inputs: 341 BTU/h · Single DC input: 341 BTU/h · Dual DC inputs: 341 BTU/h
Heat dissipation
Heat dissipation method	Air cooling
Ventilation aisle	Front-to-rear or rear-to-front airflow, determined by the selected fan tray model
Reliability and availability
Power supply redundancy	1+1
Fan tray redundancy	Fully configure the switch with fan trays
Hot swapping	Power supplies and fan trays support hot swapping. Expansion cards support hot swapping, but do not hot swap an expansion card when the switch is starting up.
MTBF (year)	117.69	134.3	124.08	122.75
MTTR (hour)	1
Availability	99.999908%	99.999915%	99.999903%	99.999907%
Environment specifications
Sound pressure level at 27°C (80.6°F)	40.8 dB	41.5 dB	40.3 dB	44.9 dB
Altitude	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Operating temperature	–5°C to +50°C (23°F to 122°F) NOTE: The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Relative humidity	5% RH to 95% RH, noncondensing
Compliance
Product compliance	· Safety standards · EMC standards · Environmental and eco-friendly standards

Table1-4 Technical specifications for S5580X-HI PoE switch models

Item	S5580X-32P4X4YC-HI	S5580X-48P4YC-HI
Physical specifications
Dimensions (H × W × D)	44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in)	44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in)
Dimensions (H × W × D, with package materials)	150 × 658 × 556 mm (5.91 × 25.91 × 21.89 in)	150 × 658 × 556 mm (5.91 × 25.91 × 21.89 in)
Weight (fully configured with power supplies, fan trays, and expansion cards)	≤ 7.9 kg (17.42 lb)	≤ 8.1 kg (17.86 lb)
Technical specifications
Memory (RAM)	4 GB
Flash	4 GB
Port types and quantity
Console port	1 × serial console port
USB port	1
Management Ethernet port	1
SFP28 port	4	4
SFP+ port	4	N/A
10/100/1000 BASE-T autosensing Ethernet port	32 (support PoE)	48 (support PoE)
Fan tray, power supply, and expansion card slots
Expansion card slot	1, on the rear panel	1, on the rear panel
Power supply slot	2, on the rear panel	2, on the rear panel
Fan tray slot	2, on the rear panel	2, on the rear panel
Power supply specifications
Power input	AC input Note: The switch does not support HVDC input.
Power specifications	See "Removable power supplies"
PoE power capacity
Maximum PoE power per port	90 W	90 W
Total PoE power capacity	Depends on the power supply configuration, as shown in Table1-5.
Power consumption
Power consumption (static) Data collection standard: no load	· Single AC input: 48 W · Dual AC inputs: 59 W	· Single AC input: 54 W · Dual AC inputs: 66 W
Power consumption (with typical configuration) Data collection standard: fully configured with copper cables or network cables, at 30% load	· Single AC input: 69 W · Dual AC inputs: 77 W	· Single AC input: 78 W · Dual AC inputs: 87 W
Power consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, at 100% load	Depends on the power supply configuration, as shown in Table1-5.
Thermal consumption
Thermal consumption (static) Data collection standard: no load	· Single AC input: 163 BTU/h · Dual AC inputs: 201 BTU/h	· Single AC input: 184 BTU/h · Dual AC inputs: 225 BTU/h
Thermal consumption (typical) Data collection standard: fully configured with copper cables or network cables, at 30% load	· Single AC input: 235 BTU/h · Dual AC inputs: 262 BTU/h	· Single AC input: 266 BTU/h · Dual AC inputs: 296 BTU/h
Thermal consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, at 100% load	· Single AC input: 5834 BTU/h · Dual AC inputs: 10922 BTU/h	· Single AC input: 5684 BTU/h · Dual AC inputs: 10901 BTU/h
Heat dissipation
Heat dissipation method	Air cooling
Ventilation aisle	From the power supply side to the port side
Reliability and availability
Power supply redundancy	1+1
Fan tray redundancy	Fully configure the switch with fan trays
Hot swapping	Power supplies and fan trays support hot swapping. Expansion cards support hot swapping, but do not hot swap an expansion card when the switch is starting up.
MTBF (year)	87.14	84.56
MTTR (hour)	1
Availability	99.999869%	99.999865%
Environment specifications
Sound pressure level at 27°C (80.6°F)	35 dB	35 dB
Altitude	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Operating temperature	–5°C to +50°C (23°F to 122°F) NOTE: The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Relative humidity	5% RH to 95% RH, noncondensing
Compliance
Product compliance	· Safety standards · EMC standards · Environmental and eco-friendly standards

Table1-5 Power consumption of the S5580X-HI switch series (full load)

Power supply configuration	S5580X-32P4X4YC-HI	S5580X-48P4YC-HI
1 × PSR600-54A-B	638 W	635 W
1 × PSR920-54A-B	1014 W	1008 W
1 × PSR1600-54A-B (90 VAC to 176 VAC)	997 W	1026 W
1 × PSR1600-54A-B (176 VAC to 290 VAC)	1710 W	1666 W
2 × PSR600-54A-B	1292 W	1277 W
2 × PSR920-54A-B	2004 W	1996 W
2 × PSR1600-54A-B (90 VAC to 176 VAC)	2020 W	2010 W
2 × PSR1600-54A-B (176 VAC to 290 VAC)	3201 W	3195 W

Table1-6 PoE power capacity of the S5580X-HI switch series

Power supply configuration	S5580X-32P4X4YC-HI		S5580X-48P4YC-HI
Power supply configuration	Total PoE power capacity	Max PoE power capacity per port	Total PoE power capacity	Max PoE power capacity per port
1 × PSR600-54A-B	470 W	90 W	470 W	90 W
1 × PSR920-54A-B	790 W	90 W	790 W	90 W
1 × PSR1600-54A-B (90 VAC to 176 VAC)	790 W	90 W	790 W	90 W
1 × PSR1600-54A-B (176 VAC to 290 VAC)	1470 W	90 W	1470 W	90 W
2 × PSR600-54A-B	1040 W	90 W	1040 W	90 W
1 × PSR600-54A-B and 1 × PSR920-54A-B	1040 W	90 W	1040 W	90 W
2 × PSR920-54A-B	1620 W	90 W	1620 W	90 W
1 × PSR920-54A-B and 1 × PSR1600-54A-B (90 VAC to 176 VAC)	1280 W	90 W	1280 W	90 W
1 × PSR920-54A-B and 1 × PSR1600-54A-B (176 VAC to 290 VAC)	1620 W	90 W	1620 W	90 W
2 × PSR1600-54A-B (90 VAC to 176 VAC)	1620 W	90 W	1620 W	90 W
1 × PSR1600-54A-B (90 VAC to 176 VAC) and 1 × PSR1600-54A-B (176 VAC to 290 VAC)	1620 W	90 W	1620 W	90 W
2 × PSR1600-54A-B (176 VAC to 290 VAC)	2870 W	90 W	2870 W	90 W

IMPORTANT:

Do not install a PSR600-54A-B and a PSR1600-54A-B on the same switch.

2 Chassis views

S 5580S-24T6X-EI

Figure2-1 Front panel

(1) 10/100/1000BASE-T autosensing Ethernet port LED	(2) 100/1000BASE-X SFP port LED
(3) Management Ethernet port	(4) Console port
(5) Mode button	(6) USB port
(7) System status LED (SYS)	(8) SFP+ port
(9) SFP+ port LED	(10) Mode LED (MODE)
(11) Removable power supply 2 status LED (PWR2)	(12) Removable power supply 1 status LED (PWR1)
(13) Management Ethernet port LED (LINK/ACT)	(14) SFP port
(15) 10/100/1000BASE-T autosensing Ethernet port

Figure2-2 Rear panel

(1) Grounding screw	(2) Removable power supply 1
(3) Removable power supply 2

The S5580S-24T6X-EI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-2, two CA-70A12 power supplies are installed in the power supply slots.

S5580S-48T6X-EI

Figure2-3 Front panel

(1) 10/100/1000BASE-T autosensing Ethernet port LED	(2) SFP+ port LED
(3) Console port	(4) Mode LED (MODE)
(5) System status LED (SYS)	(6) Removable power supply 1 status LED (PWR1)
(7) Removable power supply 2 status LED (PWR2)	(8) Mode button
(9) USB port	(10) Management Ethernet port LED (LINK/ACT)
(11) Management Ethernet port	(12) SFP+ port
(13) 10/100/1000BASE-T autosensing Ethernet port

Figure2-4 Rear panel

(1) Grounding screw	(2) Removable power supply 1
(3) Removable power supply 2

The S5580S-48T6X-EI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-4, two CA-70A12 power supplies are installed in the power supply slots.

S5580X-24T6Y-EI

Figure2-5 Front panel

(1) 10/100/1000BASE-T autosensing Ethernet port LED	(2) SFP port LED
(3) Management Ethernet port	(4) Console port
(5) Mode button	(6) USB port
(7) System status LED (SYS)	(8) Mode LED (MODE)
(9) Removable power supply 2 status LED (PWR2)	(10) Removable power supply 1 status LED (PWR1)
(11) SFP28 port LED	(12) SFP28 port
(13) Management Ethernet port LED (LINK/ACT)	(14) SFP port
(15) 10/100/1000BASE-T autosensing Ethernet port

Figure2-6 Rear panel

(1) Grounding screw	(2) Removable fan tray 1
(3) Removable fan tray 2	(4) Removable power supply 1
(5) Removable power supply 2

The S5580X-24T6Y-EI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-6, two CA-70A12 power supplies are installed in the power supply slots.

The S5580X-24T6Y-EI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-6, two FAN-40F-1-F fan trays are installed in the fan tray slots.

S5580X-48T6Y-EI

Figure2-7 Front panel

(1) 10/100/1000BASE-T autosensing Ethernet port LED	(2) SFP28 port
(3) Console port	(4) Mode LED (MODE)
(5) System status LED (SYS)	(6) Removable power supply 1 status LED (PWR1)
(7) Removable power supply 2 status LED (PWR2)	(8) Mode button
(9) USB port	(10) Management Ethernet port LED (LINK/ACT)
(11) Management Ethernet port	(12) SFP28 port LED
(13) 10/100/1000BASE-T autosensing Ethernet port

Figure2-8 Rear panel

(1) Grounding screw	(2) Removable fan tray 1
(3) Removable fan tray 2	(4) Removable power supply 1
(5) Removable power supply 2

The S5580X-48T6Y-EI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-8, two CA-70A12 power supplies are installed in the power supply slots.

The S5580X-48T6Y-EI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-8, two FAN-40F-1-F fan trays are installed in the fan tray slots.

S5580X-32S8T4X4YC-HI

Figure2-9 Front panel

(1) SFP port	(2) SFP port LED
(3) 10/100/1000 BASE-T autosensing Ethernet port	(4) 10/100/1000 1000BASE-T autosensing Ethernet port LED
(5) Management Ethernet port	(6) Console port
(7) Mode button	(8) USB port
(9) System LED (SYS)	(10) Mode LED (MODE)
(11) SFP28 port	(12) SFP28 port LED
(13) Expansion module LED (SLOT)	(14) Removable power supply 2 status LED (PWR2)
(15) Removable power supply 1 status LED (PWR1)	(16) Management Ethernet port LED (LINK/ACT)
(17) SFP + port	(18) SFP + port LED

Figure2-10 Rear panel

(1) Grounding screw	(2) Expansion module
(3) Removable fan tray 1	(4) Removable fan tray 2
(5) Removable power supply 1	(6) Removable power supply 2

The S5580X-32S8T4X4YC-HI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-10, two PSR180-12A-B power supplies are installed in the power supply slots.

The S5580X-32S8T4X4YC-HI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-10, two LSPM1FANSB-SN fan trays are installed in the fan tray slots.

S5580X-48S4YC-HI

Figure2-11 Front panel

(1) SFP port	(2) SFP port LED
(3) Management Ethernet port	(4) Console port
(5) Mode button	(6) USB port
(7) System LED (SYS)	(8) Mode LED (MODE)
(9) SFP28 port	(10) SFP28 port LED
(11) Expansion module LED (SLOT)	(12) Removable power supply 2 status LED (PWR2)
(13) Removable power supply 1 status LED (PWR1)	(14) Management Ethernet port LED (LINK/ACT)

Figure2-12 Rear panel

(1) Grounding screw	(2) Expansion module
(3) Removable fan tray 1	(4) Removable fan tray 2
(5) Removable power supply 1	(6) Removable power supply 2

The S5580X-48S4YC-HI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-12, two PSR180-12A-B power supplies are installed in the power supply slots.

The S5580X-48S4YC-HI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-12, two LSPM1FANSB-SN fan trays are installed in the fan tray slots.

S5580X-32T4X4YC-HI

Figure2-13 Front panel

(1) 10/100/1000 BASE-T autosensing Ethernet port	(2) 10/100/1000 1000BASE-T autosensing Ethernet port LED
(3) Management Ethernet port	(4) Console port
(5) Mode button	(6) USB port
(7) System LED (SYS)	(8) Mode LED (MODE)
(9) SFP28 port	(10) SFP28 port LED
(11) Expansion module LED (SLOT)	(12) Removable power supply 2 status LED (PWR2)
(13) Removable power supply 1 status LED (PWR1)	(14) Management Ethernet port LED (LINK/ACT)
(15) SFP+ port	(16) SFP+ port LED

Figure2-14 Rear panel

(1) Grounding screw	(2) Expansion module
(3) Removable fan tray 1	(4) Removable fan tray 2
(5) Removable power supply 1	(6) Removable power supply 2

The S5580X-32T4X4YC-HI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-14, two PSR180-12A-B power supplies are installed in the power supply slots.

The S5580X-32T4X4YC-HI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-14, two LSPM1FANSB-SN fan trays are installed in the fan tray slots.

S5580X-48T4YC-HI

Figure2-15 Front panel

(1) 10/100/1000 BASE-T autosensing Ethernet port	(2) 10/100/1000 1000BASE-T autosensing Ethernet port LED
(3) Management Ethernet port	(4) Console port
(5) Mode button	(6) USB port
(7) System LED (SYS)	(8) Mode LED (MODE)
(9) SFP28 port	(10) SFP28 port LED
(11) Expansion module LED (SLOT)	(12) Removable power supply 2 status LED (PWR2)
(13) Removable power supply 1 status LED (PWR1)	(14) Management Ethernet port LED (LINK/ACT)

Figure2-16 Rear panel

(1) Grounding screw	(2) Expansion module
(3) Removable fan tray 1	(4) Removable fan tray 2
(5) Removable power supply 1	(6) Removable power supply 2

The S5580X-48T4YC-HI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-16, two PSR180-12A-B power supplies are installed in the power supply slots.

The S5580X-48T4YC-HI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-16, two LSPM1FANSB-SN fan trays are installed in the fan tray slots.

S5580X-32P4X4YC-HI

Figure2-17 Front panel

(1) 10/100/1000 BASE-T-POE++ autosensing Ethernet port	(2) 10/100/1000 BASE-T-POE++ autosensing Ethernet port LED
(3) Management Ethernet port LED (LINK/ACT)	(4) Management Ethernet port
(5) Console port	(6) Mode button
(7) USB port	(8) System LED (SYS)
(9) Mode LED (MODE)	(10) Expansion module LED (SLOT)
(11) Removable power supply 2 status LED (PWR2)	(12) Removable power supply 1 status LED (PWR1)
(13) Management Ethernet port LED (LINK/ACT)	(14) SFP28 port
(15) SFP28 port LED	(16) SFP+ port LED
(17) SFP+ port

Figure2-18 Rear panel

(1) Grounding screw	(2) Expansion module
(3) Removable fan tray 1	(4) Removable fan tray 2
(5) Removable power supply 1	(6) Removable power supply 2

The S5580X-32P4X4YC-HI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-18, two PSR920-54A-B power supplies are installed in the power supply slots.

The S5580X-32P4X4YC-HI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-18, two LSPM1FANSB-SN fan trays are installed in the fan tray slots.

S5580X-48P4YC-HI

Figure2-19 Front panel

(1) 10/100/1000 BASE-T-POE++ autosensing Ethernet port	(2) 10/100/1000 BASE-T-POE++ autosensing Ethernet port LED
(3) Management Ethernet port LED (LINK/ACT)	(4) Management Ethernet port
(5) Console port	(6) Mode button
(7) USB port	(8) System LED (SYS)
(9) Mode LED (MODE)	(10) Expansion module LED (SLOT)
(11) Removable power supply 2 status LED (PWR2)	(12) Removable power supply 1 status LED (PWR1)
(13) Management Ethernet port LED (LINK/ACT)	(14) SFP28 port LED
(15) SFP28 port

Figure2-20 Rear panel

(1) Grounding screw	(2) Expansion module
(3) Removable fan tray 1	(4) Removable fan tray 2
(5) Removable power supply 1	(6) Removable power supply 2

The S5580X-48P4YC-HI switch came with power supply slot PWR1 empty and power supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch as required. In Figure2-20, two PSR920-54A-B power supplies are installed in the power supply slots.

The S5580X-48P4YC-HI switch came with the two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-20, two LSPM1FANSB-SN fan trays are installed in the fan tray slots.

3 Removable component compatibility matrixes

Some switch models support removable components. Table3-1 describes the removable components available for the switch.

Table3-1 Compatibility matrix between S5580S-EI&S5580X-EI switches and removable components

Removable component model	S5580S-24T6X-EI S5580S-48T6X-EI	S5580X-24T6Y-EI S5580X-48T6Y-EI
Removable power supplies
CA-70A12	Supported	Supported
PSR75-12A	Supported	Supported
PSR180-12D-B	Supported	Supported
Removable fan trays
FAN-40B-1-F	N/A	Supported
FAN-40F-1-F	N/A	Supported

Table3-2 Compatibility matrix between S5580X-HI switches and removable components

Removable component model	S5580X-32S8T4X4YC-HI S5580X-48S4YC-HI S5580X-32T4X4YC-HI S5580X-48T4YC-HI	S5580X-32P4X4YC-HI S5580X-48P4YC-HI
Removable power supplies
PSR180-12A-F	Supported	N/A
PSR180-12A-B	Supported	N/A
PSR180-12D-B	Supported	N/A
PSR600-54A-B	N/A	Supported
PSR920-54A-B	N/A	Supported
PSR1600-54A-B	N/A	Supported
Removable fan trays
LSPM1FANSA-SN	Supported	N/A
LSPM1FANSB-SN	Supported	Supported
Expansion cards
LSWM2MGT8P	Supported	Supported
LSWM2XMGT8P	Supported	Supported
LSWM2ZQP2P	Supported	Supported
LSWM2ZSP8P	Supported	Supported
LSPM6FWD	Supported	Supported
LSWM2EC	Supported	Supported
LSWM2-iMC	Supported	Supported
LSWM2QP2P	Supported	Supported
LSWM2SP8P	Supported	Supported
LSWM4SP8PM	Supported	Supported

CAUTION:

· You can power on the switch only when the switch has all fan trays of the same model installed.

· Do not install a PSR600-54A-B and a PSR1600-54A-B on the same switch.

NOTE:

· For non-PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy on the switch. You can install an AC power supply and a DC power supply on the same switch.

· For PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy on the switch. PoE capabilities vary by power supply configuration. When a power supply fails, PoE capabilities of the switch might decrease. For more information about PoE power capacity, see Table1-6. When a power supply fails, the PoE capability of the switch might degrade.

· The removable components available for the switch series are subject to change over time. For the most recent list of removable components for the switch, see the release notes.

4 Removable power supplies

70W power supply (CA-70A12)

View

Figure4-1 CA-70A12 AC power supply view

Functions

The CA-70A12 is an AC and DC input and DC output power supply. It provides a maximum output of 70 W.

Table4-1 CA-70A12 power supply features

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating.

Technical specifications

Table4-2 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in)
Weight	0.6 kg (1.32 lb)
Rated input voltage range	AC input: 100 VAC to 240 VAC @ 50 Hz or 60 Hz HVDC input: 240 VDC
Max input voltage range	AC input: 90 VAC to 290 VAC @ 47 Hz to 63 Hz HVDC input: 180 VDC to 320 VDC
Rated input current	N/A
Rated output current	5.83 A
Rated output voltage	12 V
Rated output power	70 W
Melting current of power supply fuse	10 A/250 V

75W power supply (PSR75-12A)

View

Figure4-2 PSR75-12A power supply view

(1) Mounting screws	(2) Power input receptacle
(3) Power cord retainer clip	(4) Handle

Functions

The PSR75-12A is an AC and DC input and DC output power supply. It provides a maximum output of 75 W.

Table4-3 PSR75-12A power supply features

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating.

Technical specifications

Table4-4 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in)
Weight	0.72 kg (1.59 lb)
Rated input voltage range	AC input: 100 VAC to 240 VAC @ 50 Hz or 60 Hz HVDC input: 240 VDC
Max input voltage range	AC input: 90 VAC to 290 VAC @ 47 Hz to 63 Hz HVDC input: 180 VDC to 320 VDC
Rated input current	N/A
Rated output current	6.3 A
Rated output voltage	12 V
Rated output power	75 W
Melting current of power supply fuse	3.15 A/250 V

180W power supplies (PSR180-12A-F and PSR180-12A-B)

View

Figure4-3 PSR180-12A-B AC power supply view

The PSR180-12A-F and PSR180-12A-B AC power supplies are similar in views except for their marks.

Functions

The PSR180-12A-F and PSR180-12A-B are AC power supplies with AC input and DC output. The power supplies provide an output voltage of 12 V and a maximum output of 180 W.

1. Features provided by the PSR180-12A-F and PSR180-12A-B power supplies

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating correctly.

Technical specifications

Table4-5 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in)
Weight	0.8 kg (1.76 lb)
Rated AC input voltage range	100 VAC to 240 VAC @ 50 or 60 Hz
Max AC input voltage range	90 VAC to 290 VAC @ 47 to 63 Hz
Rated input current	N/A
Rated output current	15 A
Rated output voltage	12 V
Rated output power	180 W
Melting current of power supply fuse	6.3 A/250 V

180W power supply (PSR180-12D-B)

View

Figure4-4 PSR180-12D-B DC power supply view

Functions

The PSR180-12D-B is a DC power supply with DC input and DC output. It provides an output voltage of 12 V and a maximum output of 180 W.

Table4-6 PSR180-12D-B power supply features

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating correctly.

Technical specifications

Table4-7 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in)
Weight	1 kg (2.20 lb)
Rated input voltage range	–48 VDC to –60 VDC
Max input voltage range	–36 VDC to –72 VDC
Rated input current	N/A
Rated output current	15 A
Rated output voltage	12 V
Rated output power	180 W
Melting current of power supply fuse	8 A/125 V

600W power supply (PSR600-54A-B)

View

Figure4-5 PSR600-54A-B AC power supply view

For information about the status LEDs, see "Status LEDs on a 600W/920W/1600W power supply."

Functions

The PSR600-54A-B is an AC and HVDC input and DC output power supply.

1. PSR600-54A-B power supply features

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating correctly.

Technical specifications

Table4-8 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40.2 × 73.5 × 213.8 mm (1.58 × 2.89 × 8.42 in)
Weight	1 kg (2.20 lb)
Rated input voltage range	AC input: 100 VAC to 240 VAC @ 50 or 60 Hz HVDC input: 240 VDC
Max input voltage range	AC input: 90 VAC to 290 VAC @ 47 to 63 Hz HVDC input: 180 to 320 VDC
Rated input current	N/A
Rated output current	11 A
Rated output voltage	56 V
Rated output power	600 W
Melting current of power supply fuse	10 A/250 V

920W power supply (PSR920-54A-B)

View

Figure4-6 PSR920-54A-B AC power supply view

For information about the status LEDs, see "Status LEDs on a 600W/920W/1600W power supply."

Functions

The PSR920-54A-B is an AC and HVDC input and DC output power supply.

1. Features provided by the PSR920-54A-B power supply

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating correctly.

Technical specifications

Table4-9 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40.2 × 73.5 × 213.8 mm (1.58 × 2.89 × 8.42 in)
Weight	1 kg (2.20 lb)
Rated input voltage range	AC input: 100 VAC to 240 VAC @ 50 or 60 Hz HVDC input: 240 VDC
Max input voltage range	AC input: 90 VAC to 290 VAC @ 47 to 63 Hz HVDC input: 180 to 320 VDC
Rated input current	N/A
Rated output current	16.5 A
Rated output voltage	56 V
Rated output power	920 W
Melting current of power supply fuse	16 A/250 V

1600W power supply (PSR1600-54A-B)

View

Figure4-7 PSR1600-54A-B AC power supply view

For information about the status LEDs, see "Status LEDs on a 600W/920W/1600W power supply."

Functions

The PSR1600-54A-B is an AC and HVDC input and DC output power supply.

1. Features provided by the PSR1600-54A-B power supply

Feature	Description
Protection function	Protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions.
Support for redundancy	Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing.
Support for hot swapping	You can remove one of the power supplies in 1+1 redundancy when the switch is operating correctly.

Technical specifications

Table4-10 Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40.2 × 73.5 × 213.8 mm (1.58 × 2.89 × 8.42 in)
Weight	1 kg (2.20 lb)
Rated input voltage range	AC input: 100 VAC to 240 VAC @ 50 or 60 Hz HVDC input: 240 VDC
Max input voltage range	AC input: 90 VAC to 290 VAC @ 47 to 63 Hz HVDC input: 180 to 320 VDC
Rated input current	N/A
Rated output current	· AC input: ¡ 17 A: 90 to 176 V @ 47 to 63 Hz ¡ 29 A: 176 to 290 V @ 47 to 63 Hz · HVDC input: 29 A
Rated output voltage	56 V
Rated output power	· AC input: ¡ 950 W: 90 to 176 V @ 47 to 63 Hz ¡ 1600 W: 176 to 290 V @ 47 to 63 Hz · HVDC input: 29 A
Melting current of power supply fuse	16 A/125 V

5 Removable fan trays

FAN-40B-1-F

View

Figure5-1 FAN-40B-1-F fan tray view

For information about the status LED, see Table7-47.

Functions

The FAN-40B-1-F fan tray blows air from the power supply side to the port side. The fan tray features small size, fast heat dissipation, and hot swapping, and can automatically adjust the fan speed based on the device temperature.

Technical specifications

1. Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40 × 40 × 105 mm (1.57 × 1.57 × 4.13 in)
Fan quantity	1
Weight	N/A
Airflow direction	Air drawn in from the fan tray faceplate
Fan speed	15600±10% R.P.M
Max airflow	20.56 CFM (0.58 m3/min)
Input voltage	12 V
Max power consumption	N/A

FAN-40F-1-F

View

Figure5-2 FAN-40F-1-F fan tray view

For information about the status LED, see Table7-47.

Functions

The FAN-40F-1-F fan tray draws air from the port side to the power supply side. The fan tray features small size, fast heat dissipation, and hot swapping, and can automatically adjust the fan speed based on the device temperature.

Technical specifications

1. Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40 × 40 × 105 mm (1.57 × 1.57 × 4.13 in)
Fan quantity	1
Weight	N/A
Airflow direction	Air exhausted from the fan tray faceplate
Fan speed	15600±10% R.P.M
Max airflow	20.56 CFM (0.58 m3/min)
Input voltage	12 V
Max power consumption	N/A

LSPM1FANSA-SN

View

Figure5-3 LSPM1FANSA-SN fan tray view

For information about the status LED, see Table7-48.

Functions

The LSPM1FANSA-SN fan tray blows air from the power supply side to the port side. The fan tray features small size, fast heat dissipation, and hot swapping, and can automatically adjust the fan speed based on the device temperature.

Technical specifications

1. Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40 × 40.6 × 105 mm (1.57 × 1.60 × 4.13 in)
Fan quantity	1
Weight	N/A
Airflow direction	Air drawn in from the fan tray faceplate
Fan speed	20000 R.P.M
Max airflow	20 CFM (0.57 m3/min)
Input voltage	12 V
Max power consumption	9.8 W

LSPM1FANSB-SN

View

Figure5-4 LSPM1FANSB-SN fan tray view

For information about the status LED, see Table7-48.

Functions

The LSPM1FANSB-SN fan tray draws air from the port side to the power supply side. The fan tray features small size, fast heat dissipation, and hot swapping, and can automatically adjust the fan speed based on the device temperature.

Technical specifications

1. Technical specifications

Item	Specification
Dimensions (H × W × D, including the handle)	40 × 40.6 × 105 mm (1.57 × 1.60 × 4.13 in)
Fan quantity	1
Weight	N/A
Airflow direction	Air exhausted from the fan tray faceplate
Fan speed	20000 R.P.M
Max airflow	20 CFM (0.57 m3/min)
Input voltage	12 V
Max power consumption	9.8 W

6 Expansion cards

LSWM2QP2P

About LSWM2QP2P

The LSWM2QP2P interface module provides two QSFP+ ports.

Figure6-1 LSWM2QP2P interface module view

Ports and LEDs

For information about the ports and transceiver modules and cables available for the ports, see "QSFP+ port."

For information about the LEDs, see "QSFP+ port LED."

Technical specifications

1. Technical specifications

Item	Specification
Dimensions (H × W × D)	40.1 × 95 × 147.5 mm (1.58 × 3.74 × 5.81 in)
Weight	0.4 kg (0.88 lb)
Power consumption (static)	9 W
Power consumption (with typical configuration)	10 W
Power consumption (fully configured)	14 W

LSWM2MGT8P

About LSWM2MGT8P

The LSWM2MGT8P interface module provides eight 5G/2.5G/1000BASE-T autosensing Ethernet ports.

Figure6-2 LSWM2MGT8P interface module view

Ports and LEDs

For information about the ports, see "5G/2.5G/1000BASE-T autosensing Ethernet port."

For information about the LEDs, see "5G/2.5G/1000BASE-T autosensing Ethernet port LED."

LSWM2XMGT8P

About LSWM2XMGT8P

The LSWM2XMGT8P interface module provides eight 10G/5G/2.5G/1000BASE-T autosensing Ethernet ports.

Figure6-3 LSWM2XMGT8P interface module view

Ports and LEDs

For information about the ports, see "10G/5G/2.5G/1000BASE-T autosensing Ethernet port."

For information about the LEDs, see "10G/5G/2.5G/1000BASE-T autosensing Ethernet port LED."

LSWM2ZQP2P

About LSWM2ZQP2P

The LSWM2ZQP2P interface module provides two QSFP28 ports.

Figure6-4 LSWM2ZQP2P interface module view

Ports and LEDs

For information about the ports and transceiver modules and cables available for the ports, see "QSFP28 port."

For information about the LEDs, see "QSFP28 port LED."

LSWM2ZSP8P

About LSWM2ZSP8P

The LSWM2ZSP8P interface module provides eight SFP28 ports.

Figure6-5 LSWM2ZSP8P interface module view

Ports and LEDs

For information about the ports and transceiver modules and cables available for the ports, see "SFP28 port (applicable to expansion cards)."

For information about the LEDs, see "SFP28 port LED."

LSPM6FWD

About LSPM6FWD

The LSPM6FWD is a fourth-generation high performance firewall module. It provides features including firewall, VPN, content filtering, content identification, URL filtering, and NAT. By using this module on a switch, you can enhance the switch security capabilities without changing the network topology.

Figure6-6 LSPM6FWD front panel

(1) Management Ethernet port LED (ACT/LINK)	(2) 10/100/1000BASE-T management Ethernet port
(3) System status LED (SYS)	(4) Console port (CONSOLE)
(5) Captive screw

Ports and LEDs

For information about the ports, see "Ports on an LSPM6FWD firewall module."

For information about the LEDs, see "LEDs on an LSPM6FWD firewall module."

Technical specifications

1. Technical specifications

Item	Specification
Dimensions (H × W × D)	44.1 × 95 × 197.8 mm (1.74 × 3.74 × 7.79 in)
Weight	0.688 kg (1.52 lb)
Power consumption (static)	N/A
Power consumption (with typical configuration)	N/A
Power consumption (fully configured)	50 W

LSWM2EC

About LSWM2EC

The LSWM2EC EPS scanner module scans network-wide endpoints as instructed by the EPS server for port type and operating system type automatically and sends scanning results to the EPS server. Upon receiving the port information, the EPS server provides a baseline management over the endpoints that access the network system. By using this module on a switch, you can save hardware resources, increase the number of endpoints that can be scanned, and perform incremental scanning.

Figure6-7 LSWM2EC EPS scanner module view

Ports and LEDs

For information about the ports, see "Ports on an LSWM2EC EPS scanner module."

For information about the LEDs, see "LEDs on an LSWM2EC EPS scanner module."

Technical specifications

1. Technical specifications

Item	Specification
Processor	Intel C3758, 2.2 GHz
DDR	8G DDR4
Flash	64GB EMMC
Operating system	Linux
Maximum number of endpoints that can be scanned	2500
Ports	· 1 × management Ethernet port (MGMT) · 1 × console port · 2 × USB 3.0 ports
Dimensions (H × W × D)	41.1 × 95 × 197.5 mm (1.62 × 3.74 × 7.78 in)
Weight	0.5 kg (1.10 lb)
Power consumption (static)	14 W
Power consumption (with typical configuration)	N/A
Power consumption (fully configured)	30 W

LSWM2-iMC

About LSWM2-iMC

The LSWM2-iMC intelligent network management module provides endpoint admission management for small- and medium-sized campus networks. The module aims to provide network management solutions that integrate the terminal users, resources, and network services for network administrators.

Running on the Intelligent Management Center (IMC) platform, the module implements comprehensive management over endpoint users by using End-user Intelligent Access (EIA) and Endpoint Admission Defense (EAD). For more information about IMC, EIA, and EAD, see H3C IMC Getting Started Guide.

Figure6-8 LSWM2-iMC intelligent network management module view

Ports and LEDs

For information about the ports, see "Ports on an LSWM2-iMC intelligent network management module."

For information about the LEDs, see "LEDs on an LSWM2-iMC intelligent network management module."

Technical specifications

1. Technical specifications

Item	Specification
Processor	Intel C3758, 2.2 GHz
DDR	16GB DDR4
SSD	480GB EMMC
Operating system	Linux
Ports	· 1 × management Ethernet port (MGMT) · 1 × console port · 2 × USB 3.0 ports
Dimensions (H × W × D)	41.1 × 95 × 197.5 mm (1.62 × 3.74 × 7.78 in)
Weight	0.5 kg (1.10 lb)
Power consumption (static)	16 W
Power consumption (with typical configuration)	N/A
Power consumption (fully configured)	33 W

LSWM2SP8P/LSWM2SP8PM

About LSWM2SP8P and LSWM2SP8PM

The LSWM2SP8PM and LSWM2SP8P interface cards each provide eight SFP+ ports. The SFP+ ports on the LSWM2SP8PM interface card support MACsec. The views of LSWM2SP8P and LSWM2SP8PM are the same. The following figure uses the LSWM2SP8PM as an example.

Figure6-9 LSWM2SP8PM interface card view

Ports and LEDs

For information about the ports and transceiver modules and cables available for the ports, see "SFP+ port (applicable to expansion cards)."

For information about the LEDs, see "SFP+ port LED."

7 Ports and LEDs

Ports

Console port

Table7-1 Console port specifications (1)

Item	Specification
Connector type	RJ-45
Compliant standard	EIA/TIA-232
Transmission baud rate	9600 bps (default) to 115200 bps
Services	· Provides connection to an ASCII terminal · Provides connection to the serial port of a local PC running terminal emulation program
Compatible switch models	All switch models

Table7-2 Console port specifications (2)

Item	Specification
Connector type	RJ-45
Compliant standard	RS-232
Transmission baud rate	9600 bps (default) to 115200 bps
Transmission medium and max transmission distance	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Services	· Provides connection to an ASCII terminal · Provides connection to the serial port of a local PC running terminal emulation program · Supports command line interface (CLI)
Compatible expansion cards	LSPM6FWD

Management Ethernet port

Table7-3 Management Ethernet port specifications

Item	Specification
Connector type	RJ-45
Port transmission rate	· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing
Transmission medium	Category 5 or above twisted pair cable
Max transmission distance	100 m (328.08 ft)
Compliant standard	IEEE 802.3i, IEEE 802.3u, and IEEE 802.3ab
Functions and services	Connects to a local PC or a remote management station for software and Boot ROM upgrade, and network management
Compatible switch models	All switch models

USB port

Table7-4 USB port specifications

Item	Specification
Port type	USB 2.0
Compliant standard	OHC
Port transmission rate	Uploads and downloads data at a rate up to 480 Mbps
Functions and services	Accesses the file system on the flash of the switch, for example, to upload or download application and configuration files
Compatible switch models	All device switch models

NOTE:

USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee correct operation of USB devices from other vendors on the switch. If a USB device fails to operate on the switch, replace it with one from another vendor.

SFP port

Table7-5 SFP port specifications

Item	Specification
Port type	SFP port
Compatible transceiver modules and cables	· GE SFP transceiver modules and cables in Table7-6 · FE SFP transceiver modules in Table7-7
Compatible switch models	S5580S-24T6X-EI, S5580X-24T6Y-EI, S5580X-32S8T4X4YC-HI, S5580X-48S4YC-HI
Restrictions	· Only the S5580X-24T6Y-EI and S5580X-48T6Y-EI switches support SFP-25G-SR-MM850-H, SFP-25G-LR-SM1310-I, and SFP-25G-CSR-MM850. · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-32T4X4YC-HI or S5580X-48T4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-32S8T4X4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). When the switch is fully configured with fiber ports, make sure the number of transceiver modules (SFP-GE-T or SFP-GE-T-D) on GE SFP copper ports or transceiver modules with a maximum transmission distance ≥ 40 km (24.86 miles) does not exceed 12. · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-48S4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). When the switch is fully configured with fiber ports, make sure the number of transceiver modules (SFP-GE-T or SFP-GE-T-D) on GE SFP copper ports or transceiver modules with a maximum transmission distance ≥ 40 km (24.86 miles) does not exceed 20.

Table7-6 GE SFP transceiver modules and cables available for the 100/1000BASE-X SFP ports

GE SFP transceiver module and cable	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
GE SFP transceiver modules
SFP-GE-T	N/A	RJ-45	Twisted pair cable	N/A	100 m (328.08 ft)
SFP-GE-SX-MM850-A	850	LC	50/125, MMF	500	550 m (1804.46 ft)
			50/125, MMF	400	500 m (1640.42 ft)
			62.5/125, MMF	200	275 m (902.23 ft)
			62.5/125, MMF	160	200 m (656.17 ft)
SFP-GE-LX-SM1310-A	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
			50/125, MMF	500 or 400	550 m (1804.46 ft)
			62.5/125, MMF	500	550 m (1804.46 ft)
SFP-GE-LH20-SM1310-I	1310	LC	9/125, SMF	N/A	20 km (12.43 miles)
SFP-GE-LH40-SM1310-I	1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1310	1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1550	1550	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH80-SM1550	1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-GE-LH100-SM1550	1550	LC	9/125, SMF	N/A	100 km (62.14 miles)
SFP-GE-LX-SM1310-BIDI	Tx: 1310 Rx: 1490	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-LX-SM1490-BIDI	Tx: 1490 Rx: 1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-LH40-SM1310-BIDI	Tx: 1310 Rx: 1550	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1550-BIDI	Tx: 1550 Rx: 1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH70-SM1490-BIDI	Tx: 1490 Rx: 1550	LC	9/125, SMF	N/A	70 km (43.50 miles)
SFP-GE-LH70-SM1550-BIDI	Tx: 1550 Rx: 1490	LC	9/125, SMF	N/A	70 km (43.50 miles)
GE SFP cable
SFP-STACK-Kit	N/A	N/A	SFP cable	N/A	1.5 m (4.92 ft)

IMPORTANT:

The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules, and SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module.

Table7-7 FE SFP transceiver modules available for the 100/1000BASE-X SFP ports

FE SFP transceiver module	Central wavelength (nm)	Connector	Fiber diameter (µm)	Max transmission distance
SFP-FE-SX-MM1310-A	1310	LC	50/125, MMF	2 km (1.24 miles)
SFP-FE-SX-MM1310-A	1310	LC	62.5/125, MMF	2 km (1.24 miles)
SFP-FE-LX-SM1310-A	1310	LC	9/125, SMF	15 km (9.32 miles)
SFP-FE-LH40-SM1310	1310	LC	9/125, SMF	40 km (24.86 miles)
SFP-FE-BX15-U-SM1310	1310	LC	9/125, SMF	15 km (9.32 miles)
SFP-FE-LH80-SM1550	1550	LC	9/125, SMF	80 km (49.71 miles)
SFP-FE-LX-SM1310-BIDI	Tx: 1310 Rx: 1550	LC	9/125, SMF	15 km (9.32 miles)
SFP-FE-LX-SM1550-BIDI	Tx: 1550 Rx: 1310	LC	9/125, SMF	15 km (9.32 miles)

IMPORTANT:

The SFP-FE-LX-SM1310-BIDI and SFP-FE-LX-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-FE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-FE-LX-SM1550-BIDI transceiver module.

NOTE:

· As a best practice, use H3C transceiver modules and network cables for the switch.

· The H3C transceiver modules and network cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact H3C Support or marketing staff.

· For the specifications of H3C transceiver modules and network cables, see H3C Transceiver Modules User Guide.

SFP+ port (applicable to chassis)

Table7-8 SFP+ port specifications

Item	Specification
Port type	SFP+ port
Compatible transceiver modules and cables	· GE SFP transceiver modules and cables in Table7-6 · 10-GE SFP+ transceiver modules and cables in Table7-9
Compatible switch models	S5580S-24T6X-EI, S5580S-48T6X-EI
Restrictions and guidelines	· To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-32T4X4YC-HI or S5580X-48T4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-32S8T4X4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). When the switch is fully configured with fiber ports, make sure the number of transceiver modules with a maximum transmission distance ≥ 40 km (24.86 miles) does not exceed 12.

Table7-9 10-GE SFP+ transceiver modules and cables available for the SFP+ ports on the chassis

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP+ transceiver modules
SFP-XG-SX-MM850-D	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP-XG-LX-SM1310	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LX-SM1310-D	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LH40-SM1550	1550	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-XG-LH80-SM1550	1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-XG-LX-SM1270-BIDI	Tx: 1270 Rx: 1330	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LX-SM1330-BIDI	Tx: 1330 Rx: 1270	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LH40-SM1270-BIDI	Tx: 1270 Rx: 1330	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-XG-LH40-SM1330-BIDI	Tx: 1330 Rx: 1270	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-XG-LH80-SM1490-BIDI	Tx: 1490 Rx: 1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-XG-LH80-SM1550-BIDI	Tx: 1550 Rx: 1490	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP+ copper cables
LSWM1STK	N/A	N/A	SFP+ copper cable	N/A	0.65 m (2.13 ft)
LSWM2STK	N/A	N/A	SFP+ copper cable	N/A	1.2 m (3.94 ft)
LSWM3STK	N/A	N/A	SFP+ copper cable	N/A	3 m (9.84 ft)
LSTM1STK	N/A	N/A	SFP+ copper cable	N/A	5 m (16.40 ft)
SFP+ fiber cables
SFP-XG-D-AOC-7M	N/A	N/A	SFP+ fiber cable	N/A	7 m (22.97 ft)
SFP-XG-D-AOC-10M	N/A	N/A	SFP+ fiber cable	N/A	10 m (32.81 ft)
SFP-XG-D-AOC-20M	N/A	N/A	SFP+ fiber cable	N/A	20 m (65.62 ft)

NOTE:

· As a best practice, use H3C transceiver modules and network cables for the switch.

· The H3C transceiver modules and network cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact H3C Support or marketing staff.

· The SFP-XG-LX-SM1270-BIDI and SFP-XG-LX-SM1330-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-XG-LX-SM1270-BIDI transceiver module, the other end must use the SFP-XG-LX-SM1330-BIDI transceiver module.

· For the specifications of H3C transceiver modules and network cables, see H3C Transceiver Modules User Guide.

Figure7-1 SFP+ cable

(1) Connector	(2) Pull latch

SFP+ port (applicable to expansion cards)

Table7-10 SFP+ port specifications

Item	Specification
Port type	SFP+ port
Compatible transceiver modules and cables	· 10-GE SFP+ transceiver modules and cables in Table7-11 and Table7-12 · GE SFP transceiver modules and cables in Table7-13 and Table7-14
Compatible expansion cards	LSWM4SP8PM, LSWM2SP8PM, LSWM2SP8P

Table7-11 10-GE SFP+ transceiver modules and cables available for the SFP+ ports on the LSWM4SP8PM interface module

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP+ transceiver modules
SFP-XG-LX-SM1310	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LX-SM1310-D	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LX-SM1310-E	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-SX-MM850-A	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP-XG-SX-MM850-D	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP-XG-SX-MM850-E	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP+ copper cables
LSWM1STK	N/A	N/A	N/A	N/A	0.65 m (2.13 ft)
LSWM2STK	N/A	N/A	N/A	N/A	1.2 m (3.94 ft)
LSWM3STK	N/A	N/A	N/A	N/A	3 m (9.84 ft)
LSTM1STK	N/A	N/A	N/A	N/A	5 m (16.40 ft)

Table7-12 10-GE SFP+ transceiver modules and cables available for the SFP+ ports on the LSWM2SP8P and LSWM2SP8PM interface cards

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP+ transceiver modules
SFP-XG-LX-SM1310	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LX-SM1310-D	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-LX-SM1310-E	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-XG-SX-MM850-A	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP-XG-SX-MM850-D	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP-XG-SX-MM850-E	850	LC	50/125, MMF	2000	300 m (984.25 ft)
				500	82 m (269.03 ft)
				400	66 m (216.54 ft)
			62.5/125, MMF	200	33 m (108.27 ft)
			62.5/125, MMF	160	26 m (85.30 ft)
SFP+ copper cables
LSWM1STK	N/A	N/A	N/A	N/A	0.65 m (2.13 ft)
LSWM2STK	N/A	N/A	N/A	N/A	1.2 m (3.94 ft)
LSWM3STK	N/A	N/A	N/A	N/A	3 m (9.84 ft)
LSTM1STK	N/A	N/A	N/A	N/A	5 m (16.40 ft)

Table7-13 GE SFP transceiver modules and cables available for the SFP+ ports on the LSWM4SP8PM interface module

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP transceiver modules
SFP-GE-SX-MM850-A	850	LC	50/125, MMF	500	550 m (1804.46 ft)
			50/125, MMF	400	500 m (1640.42 ft)
			62.5/125, MMF	200	275 m (902.23 ft)
			62.5/125, MMF	160	220 m (721.78 ft)
SFP-GE-SX-MM850-D	850	LC	50/125, MMF	500	550 m (1804.46 ft)
			50/125, MMF	400	500 m (1640.42 ft)
			62.5/125, MMF	200	275 m (902.23 ft)
			62.5/125, MMF	160	220 m (721.78 ft)
SFP-GE-LX-SM1310-A	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
			50/125, MMF	500/400	550 m (1804.46 ft)
			62.5/125, MMF	500	550 m (1804.46 ft)
SFP-GE-LX-SM1310-D	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-LH40-SM1310	1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1310-D	1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1550	1550	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH80-SM1550	1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-GE-LH80-SM1550-D	1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-GE-LH100-SM1550	1550	LC	9/125, SMF	N/A	100 km (62.14 miles)
SFP-GE-LX-SM1310-BIDI	Tx: 1310 Rx: 1490	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-LX-SM1490-BIDI	Tx: 1490 Rx: 1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-T	N/A	RJ-45	Twisted pair cable	N/A	100 m (328.08 ft)
SFP-GE-T-D	N/A	RJ-45	Twisted pair cable	N/A	100 m (328.08 ft)
SFP copper cable
SFP-STACK-Kit	N/A	N/A	N/A	N/A	1.5 m (4.92 ft)

Table7-14 GE SFP transceiver modules and cables available for the SFP+ ports on the LSWM2SP8P and LSWM2SP8PM interface cards

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP transceiver modules
SFP-GE-SX-MM850-A	850	LC	50/125, MMF	500	550 m (1804.46 ft)
			50/125, MMF	400	500 m (1640.42 ft)
			62.5/125, MMF	200	275 m (902.23 ft)
			62.5/125, MMF	160	220 m (721.78 ft)
SFP-GE-SX-MM850-D	850	LC	50/125, MMF	500	550 m (1804.46 ft)
			50/125, MMF	400	500 m (1640.42 ft)
			62.5/125, MMF	200	275 m (902.23 ft)
			62.5/125, MMF	160	220 m (721.78 ft)
SFP-GE-LX-SM1310-A	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
			50/125, MMF	500/400	550 m (1804.46 ft)
			62.5/125, MMF	500	550 m (1804.46 ft)
SFP-GE-LX-SM1310-D	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-LH40-SM1310	1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1310-D	1310	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH40-SM1550	1550	LC	9/125, SMF	N/A	40 km (24.86 miles)
SFP-GE-LH70-SM1550	1550	LC	9/125, SMF	N/A	70 km (43.50 miles)
SFP-GE-LH80-SM1550	1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-GE-LH80-SM1550-D	1550	LC	9/125, SMF	N/A	80 km (49.71 miles)
SFP-GE-LH100-SM1550	1550	LC	9/125, SMF	N/A	100 km (62.14 miles)
SFP-GE-LX-SM1310-BIDI	Tx: 1310 Rx: 1490	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-LX-SM1490-BIDI	Tx: 1490 Rx: 1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-GE-T	N/A	RJ-45	Twisted pair cable	N/A	100 m (328.08 ft)
SFP-GE-T-D	N/A	RJ-45	Twisted pair cable	N/A	100 m (328.08 ft)
SFP copper cable
SFP-STACK-Kit	N/A	N/A	N/A	N/A	1.5 m (4.92 ft)

SFP28 port (applicable to chassis)

Table7-15 SFP28 port specifications

Item	Specification
Port type	SFP28 port
Compatible transceiver modules and cables	10-GE SFP+ transceiver modules and cables in Table7-9 25-GE SFP28 transceiver modules and cables in 2
Compatible switch models	S5580X-24T6Y-EI, S5580X-48T6Y-EI, S5580X-HI switch series
Restrictions	· Only the S5580X-24T6Y-EI and S5580X-48T6Y-EI switches support SFP-25G-SR-MM850-H, SFP-25G-LR-SM1310-I, and SFP-25G-CSR-MM850. · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-32T4X4YC-HI or S5580X-48T4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-32S8T4X4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). When the switch is fully configured with fiber ports, make sure the number of transceiver modules (SFP-GE-T or SFP-GE-T-D) on GE SFP copper ports or transceiver modules with a maximum transmission distance ≥ 40 km (24.86 miles) does not exceed 12. · To use transceiver modules with a maximum transmission distance ≥ 80 km (49.71 miles) on an S5580X-48S4YC-HI switch, make sure the ambient temperature is ≤ 45°C (113°F). When the switch is fully configured with fiber ports, make sure the number of transceiver modules (SFP-GE-T or SFP-GE-T-D) on GE SFP copper ports or transceiver modules with a maximum transmission distance ≥ 40 km (24.86 miles) does not exceed 12.

2. 25-GE SFP28 transceiver modules and cables available for the SFP28 ports on the chassis

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP28 transceiver modules
SFP-25G-SR-MM850	850	LC	50/125, MMF	2000	70 m (229.66 ft)
SFP-25G-SR-MM850	850	LC	50/125, MMF	4700	100 m (328.08 ft)
SFP-25G-SR-MM850-H	850	LC	50/125, MMF	2000	70 m (229.66 ft)
SFP-25G-SR-MM850-H	850	LC	50/125, MMF	4700	100 m (328.08 ft)
SFP-25G-LR-SM1310	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-25G-LR-SM1310-I	1310	LC	9/125, SMF	N/A	10 km (6.21 miles)
SFP-25G-CSR-MM850	850	LC	50/125, MMF	2000	200 m (656.17 ft)
				> 3500	300 m (984.25 ft)
				> 5500	400 m (1312.34 ft)
SFP28 copper cables
SFP-25G-D-CAB-1M	N/A	N/A	SFP28 copper cable	N/A	1 m (3.28 ft)
SFP-25G-D-CAB-3M	N/A	N/A	SFP28 copper cable	N/A	3 m (9.84 ft)
SFP-25G-D-CAB-5M	N/A	N/A	SFP28 copper cable	N/A	5 m (16.40 ft)
SFP28 fiber cables
SFP-25G-D-AOC-3M	N/A	N/A	SFP28 fiber cable	N/A	3 m (9.84 ft)
SFP-25G-D-AOC-5M	N/A	N/A	SFP28 fiber cable	N/A	5 m (16.40 ft)
SFP-25G-D-AOC-7M	N/A	N/A	SFP28 fiber cable	N/A	7 m (22.97 ft)
SFP-25G-D-AOC-10M	N/A	N/A	SFP28 fiber cable	N/A	10 m (32.81 ft)
SFP-25G-D-AOC-20M	N/A	N/A	SFP28 fiber cable	N/A	20 m (65.62 ft)

SFP28 port (applicable to expansion cards)

Table7-16 SFP28 port specifications

Item	Specification
Port type	SFP28 port
Compatible transceiver modules and cables	25-GE SFP28 transceiver modules and cables in 2
Compatible expansion cards	LSWM2ZSP8P

2. 25G SFP28 transceiver modules and cables available for the SFP28 ports on the LSWM2ZSP8P interface module

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
SFP28 transceiver modules
SFP-25G-SR-MM850	850	LC	50/125, MMF	2000	· FEC negotiation disabled: 30 m (98.43 ft) · FEC negotiation enabled: 70 (229.66 ft)
SFP-25G-SR-MM850	850	LC	50/125, MMF	4700	· FEC negotiation disabled: 40 m (131.23 ft) · FEC negotiation enabled: 100 m (328.08 ft)
SFP28 copper cables
SFP-25G-D-CAB-1M	N/A	N/A	SFP28 cable	N/A	1 m (3.28 ft)
SFP-25G-D-CAB-3M	N/A	N/A	SFP28 cable	N/A	3 m (9.84 ft)
SFP-25G-D-CAB-5M	N/A	N/A	SFP28 cable	N/A	5 m (16.40 ft)

NOTE:

· As a best practice, use H3C transceiver modules and cables for the switch.

· The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.

· For more information about H3C transceiver modules and cables, see H3C Transceiver Modules User Guide.

Figure7-2 SFP28 cable

(1) Connector	(2) Pull latch

QSFP+ port

The LSWM2QP2P interface module provides two QSFP+ ports. Install QSFP+ transceiver modules and cables as described in Table7-17.

Table7-17 QSFP+ transceiver modules and cables available for the QSFP+ ports

Transceiver module/cable model	Central wavelength (nm)	Connector	Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
QSFP+ transceiver modules
QSFP-40G-LR4-WDM1300	Four lanes: · 1271 · 1291 · 1311 · 1331	LC	9/125, SMF	N/A	70 km (43.50 miles)
QSFP-40G-CSR4-MM850	850	MPO	50/125, MMF	2000	300 m (984.25 ft)
QSFP-40G-CSR4-MM850	850	MPO	50/125, MMF	4700	400 m (1312.33 ft)
QSFP-40G-SR4-MM850	850	MPO	9/125, SMF	2000	100 m (328.08 ft)
QSFP-40G-SR4-MM850	850	MPO	9/125, SMF	4700	150 m (492.12 ft)
QSFP-40G-BIDI-SR-MM850	Two lanes: · 850 · 900	LC	50/125, MMF	2000	100 m (328.08 ft)
QSFP-40G-BIDI-SR-MM850	Two lanes: · 850 · 900	LC	50/125, MMF	4700	150 m (492.12 ft)
QSFP-40G-LR4L-WDM1300	Four lanes: · 1271 · 1291 · 1311 · 1331	LC	50/125, SMF	2000	100 m (328.08 ft)
QSFP-40G-LR4L-WDM1300	Four lanes: · 1271 · 1291 · 1311 · 1331	LC	50/125, SMF	4700	150 m (492.12 ft)
QSFP-40G-ER4-WDM1300	Four lanes: · 1271 · 1291 · 1311 · 1331	LC	50/125, SMF	N/A	2 km (1.24 miles)
QSFP-40G-BIDI-WDM850	Four lanes: · 850 · 880 · 910 · 940	MMF	50/125, SMF	2000	240 m (787.40 ft)
QSFP-40G-BIDI-WDM850	Four lanes: · 850 · 880 · 910 · 940	MMF	50/125, SMF	4700	350 m (1148.29 ft)
QSFP+ copper cables
LSWM1QSTK0	N/A	N/A	QSFP+ copper cable	N/A	1 m (3.28 ft)
LSWM1QSTK1	N/A	N/A	QSFP+ copper cable	N/A	3 m (9.84 ft)
LSWM1QSTK2	N/A	N/A	QSFP+ copper cable	N/A	5 m (16.40 ft)
QSFP+ fiber cables
QSFP-40G-D-AOC-3M	N/A	N/A	QSFP+ fiber cable	N/A	3 m (9.84 ft)
QSFP-40G-D-AOC-7M	N/A	N/A	QSFP+ fiber cable	N/A	7 m (22.97 ft)
SFP-40G-D-AOC-10M	N/A	N/A	QSFP+ fiber cable	N/A	10 m (32.81 ft)
QSFP-40G-D-AOC-20M	N/A	N/A	QSFP+ fiber cable	N/A	20 m (65.62 ft)

NOTE:

· As a best practice, use H3C transceiver modules and cables for the switch.

· The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.

· For more information about H3C transceiver modules and cables, see H3C Transceiver Modules User Guide.

Figure7-3 QSFP+ cable

(1) QSFP+ module	(2) Pull latch

QSFP28 port

The LSWM2ZQP2P interface module provides two QSFP28 ports. Install QSFP28 transceiver modules and cables in Table7-18 or QSFP+ transceiver modules and cables in Table7-17.

Table7-18 QSFP28 transceiver modules and cables available for the QSFP28 ports

Transceiver module/cable model	Central wavelength (nm)	Connector	Cable/Fiber type and diameter (µm)	Modal bandwidth (MHz × km)	Max transmission distance
QSFP+ transceiver modules
QSFP-100G-SR4-MM850	850	MPO	50/125, MMF	2000	70 m (229.66 ft)
QSFP-100G-SR4-MM850	850	MPO	50/125, MMF	4700	100 m (328.08 ft)
QSFP-100G-LR4-WDM1300	Four lanes: · 195.56 · 1300.05 · 1304.58 · 1309.14	LC	9/125, SMF	2000	70 m (229.66 ft)
QSFP-100G-LR4-WDM1300		LC	9/125, SMF	N/A	10 km (6.21 miles)
QSFP-100G-ER4L-WDM1300	Four lanes: · 1271 · 1291 · 1311 · 1331	LC	9/125, SMF	N/A	2 km (1.24 miles)
QSFP-100G-BIDI-MM850	Two lanes: · 855 · 908	LC	50/125, MMF	2000	70 m (229.66 ft)
QSFP-100G-BIDI-MM850	Two lanes: · 855 · 908	LC	50/125, MMF	4700	100 m (328.08 ft)
QSFP28 copper cables
QSFP-100G-D-CAB-1M	N/A	N/A	QSFP28 copper cable	N/A	1 m (3.28 ft)
QSFP-100G-D-CAB-3M	N/A	N/A	QSFP28 copper cable	N/A	3 m (9.84 ft)
QSFP-100G-D-CAB-5M	N/A	N/A	QSFP28 copper cable	N/A	5 m (16.40 ft)
QSFP28 fiber cables
QSFP-100G-D-AOC-7M	N/A	N/A	QSFP28 fiber cable	N/A	7 m (22.97 ft)
QSFP-100G-D-AOC-10M	N/A	N/A	QSFP28 fiber cable	N/A	10 m (32.81 ft)
QSFP-100G-D-AOC-20M	N/A	N/A	QSFP28 fiber cable	N/A	20 m (65.62 ft)

NOTE:

· As a best practice, use H3C transceiver modules and cables for the switch.

· The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.

· For more information about H3C transceiver modules and cables, see H3C Transceiver Modules User Guide.

Figure7-4 QSFP28 cable

(1) QSFP28 module	(2) Pull latch

10/100/1000BASE-T Ethernet port

Table7-19 10/100/1000BASE-T Ethernet port specifications

Item	Specification
Connector type	RJ-45
Rate, duplex mode, and auto-MDI/MDI-X	· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing
Max transmission distance	100 m (328.08 ft)
Transmission medium	Category 5 or above twisted pair cable
Compliant standard	IEEE 802.3i, IEEE 802.3u, and IEEE 802.3ab
Compatible switch models	All switch models except for S5580X-48S4YC-HI

5G/2.5G/1000BASE-T autosensing Ethernet port

The LSWM2MGT8P interface module provides eight 5G/2.5G/1000BASE-T autosensing Ethernet ports.

Table7-20 5G/2.5G/1000BASE-T autosensing Ethernet port specifications

Item	Specification
Connector type	RJ-45
Rate, duplex mode, and auto-MDI/MDI-X	· 5 Gbps, full duplex · 2.5 Gbps, full duplex · 1 Gbps, full duplex · MDI/MDI-X autosensing
Max transmission distance	· 5G mode: ¡ 55 m (180.45 ft) over a Category 5e unshielded twisted pair (UTP) cable ¡ 100 m (328.08 ft) over a Category 5e shielded twisted pair (STP) cable ¡ 100 m (328.08 ft) over a Category 6 twisted pair cable ¡ 100 m (328.08 ft) over a Category 6a twisted pair cable · 2.5G mode: 100 m (328.08 ft) over a Category 5e or above twisted pair cable
Transmission medium	Category 5e or above twisted pair cable
Standard	· IEEE 802.3an · IEEE 802.3ab

10G/5G/2.5G/1000BASE-T autosensing Ethernet port

The LSWM2XMGT8P interface module provides eight 10G/5G/2.5G/1000BASE-T autosensing Ethernet ports.

Table7-21 10G/5G/2.5G/1000BASE-T autosensing Ethernet port specifications

Item	Specification
Connector type	RJ-45
Rate, duplex mode, and auto-MDI/MDI-X	· 5 Gbps, full duplex · 2.5 Gbps, full duplex · 1 Gbps, full duplex · MDI/MDI-X autosensing
Max transmission distance	· 10G mode: ¡ 55 m (180.45 ft) over a Category 6 UTP cable ¡ 100 m (328.08 ft) over a Category 6 STP cable ¡ 100 m (328.08 ft) over a Category 6a twisted pair cable · 5G mode: ¡ 55 m (180.45 ft) over a Category 5e UTP cable ¡ 100 m (328.08 ft) over a Category 5e STP cable ¡ 100 m (328.08 ft) over a Category 6 twisted pair cable ¡ 100 m (328.08 ft) over a Category 6a twisted pair cable · 2.5G mode: 100 m (328.08 ft) over a Category 5e or above twisted pair cable
Transmission medium	Category 5e or above twisted pair cable
Standard	· IEEE 802.3an · IEEE 802.3ab

Combo interface

Table7-22 Combo interface specifications

Item	Specification
Interface type	Combo interface
Interface composition	A combo interface contains a 100/1000BASE-X SFP port and a 10/100/1000BASE-T autosensing Ethernet port. Only one of these two ports can operate at a time.
Compatible switch models	S5580X-24T6Y-EI, S5580S-24T6X-EI, S5580X-32S8T4X4YC-HI

Ports on an LSPM6FWD firewall module

Table7-23 Console port specifications

Item	Specification
Connector type	RJ-45
Compliant standard	RS-232
Port transmission rate	9600 bps (default) to 115200 bps
Transmission medium and max transmission distance	≤ 15 m (49.21 ft) over a common asynchronous serial interface cable
Services	· Provides connection to an ASCII terminal · Provides connection to the serial port of a local PC running terminal emulation program · Supports CLI

Table7-24 10/100/1000BASE-T copper Ethernet port specifications

Item	Specification
Connector type	RJ-45
Compliant standard	802.3, 802.3u, and 802.3ab
Port type	MDI/MDI-X autosensing
Transmission medium	Category 5 or above twisted pair cable
Transmission distance	100 m (328.08 ft)
Rate and duplex mode	· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · 1000 Mbps, full duplex

Ports on an LSWM2EC EPS scanner module

Table7-25 Console port specifications

Item	Specification
Connector type	RJ-45
Compliant standard	EIA/TIA-232
Port transmission rate	115200 bps
Transmission medium and max transmission distance	≤ 15 m (49.21 ft) over a common asynchronous serial interface cable
Services	· Provides connection to an ASCII terminal · Provides connection to the serial port of a local PC running terminal emulation program

Table7-26 Management Ethernet port specifications

Item	Specification
Connector type	RJ-45
Rate and duplex mode	· 1000 Mbps, full duplex · 100 Mbps, full duplex · 10 Mbps, full duplex
MDI/MDI-X autosensing	Supported
Transmission medium	Category 5 or above twisted pair cable
Max transmission distance	100 m (328.08 ft)
Compliant standard	IEEE 802.3i, 802.3u, and 802.3ab
Functions and services	Connects to a local PC or remote station for network management or software upgrade

Table7-27 USB port specifications

Item	Specification
Port type	USB 3.0
Compliant standard	xHCI
Port transmission rate	5 Gbps
Functions and services	Uploads or downloads files, such as software image file and configuration file, from the flash file system on the module.

Ports on an LSWM2-iMC intelligent network management module

Table7-28 Console port specifications

Item	Specification
Connector type	RJ-45
Compliant standard	EIA/TIA-232
Port transmission rate	115200 bps
Transmission medium and max transmission distance	≤ 15 m (49.21 ft) over a common asynchronous serial interface cable
Services	· Provides connection to an ASCII terminal · Provides connection to the serial port of a local PC running terminal emulation program

Table7-29 Management Ethernet port specifications

Item	Specification
Connector type	RJ-45
Rate and duplex mode	· 1000 Mbps, full duplex · 100 Mbps, full duplex · 10 Mbps, full duplex
MDI/MDI-X autosensing	Supported
Transmission medium	Category-5 or above twisted pair cable
Max transmission distance	100 m (328.08 ft)
Compliant standard	IEEE 802.3i, 802.3u, and 802.3ab
Functions and services	Connects to a local PC or remote station for network management or software upgrade

Table7-30 USB port specifications

Item	Specification
Port type	USB 3.0
Compliant standard	xHCI
Port transmission rate	5 Gbps
Functions and services	Uploads or downloads files, such as software image file and configuration file, from the flash file system on the module.

LEDs

System status LED

The system status LED shows the operating state of the switch.

Table7-31 System status LED description

LED mark	Status	Description
SYS	Steady green	The switch has started correctly.
	Flashing green	The switch is performing power-on self test (POST).
	Steady red	The switch has failed POST or is faulty.
	Off	The switch is powered off.

Power supply status LED

For switches that support removable power supplies, the power supply status LEDs on the switch front panel indicate the operating state of the power supplies.

Table7-32 Power supply status LED description

LED mark	Status	Description
PWR1/PWR2	Steady green	A power supply is installed in the power supply slot, and the power supply is outputting power correctly.
	Steady yellow	A power supply is installed in the power supply slot, but the power supply has failed or no power is input to the power supply.
	Off	No power supply is installed in the power supply slot.

Mode LED

For the switch model that has a mode button, the mode LED (MODE) works in conjunction with the port status LEDs to show more information about the switch.

The mode LED indicates the type of information that the port status LEDs are showing.

You can use the mode button to change the indication of the mode LED.

Table7-33 Mode LED description

LED mark	Status	Description
MODE	Steady green	The port status LEDs indicate port rates.
MODE	Flashing green (PoE model)	The port status LEDs indicate the PoE power supply status.

Management Ethernet port LED

Table7-34 Management Ethernet port LED description

LED mark	Status	Description
LINK/ACT	Steady green	A 1000 Mbps link is present on the port.
	Flashing green	The port is sending or receiving data at 1000 Mbps.
	Steady yellow	A 10/100 Mbps link is present on the port.
	Flashing yellow)	The port is sending or receiving data at 10/100 Mbps.
	Off	No link is present on the port.

LEDs on an LSPM6FWD firewall module

Table7-35 Description for the LEDs on an LSPM6FWD firewall module

LED mark	Status	Description
LINK/ACT	Steady green	A 1000 Mbps link is present on the port.
	Flashing green	The port is receiving or sending data at 1000 Mbps.
	Steady yellow	A 10/100 Mbps link is present on the port.
	Flashing yellow	The port is receiving or sending data at 10/100 Mbps.
	Off	No link is present on the port.
ACT/LINK	Off	No link is present on the port.
	Steady green	A link is present on the port.
	Flashing green	The port is sending or receiving data.

LEDs on an LSWM2EC EPS scanner module

Table7-36 Management port LED description

LED status	Description
Steady green	A 1000/100/10 Mbps link is present on the port.
Flashing green	The port is sending or receiving data at 1000/100/10 Mbps.
Off	No link is present on the port.

LEDs on an LSWM2-iMC intelligent network management module

Table7-37 Management port LED description

LED status	Description
Steady green	A 1000/100/10 Mbps link is present on the port.
Flashing green	The port is sending or receiving data at 1000/100/10 Mbps.
Off	No link is present on the port.

10/100/1000 1000BASE-T autosensing Ethernet port LED

The 10/100/1000BASE-T autosensing Ethernet port LEDs work in conjunction with the mode LED to indicate the operating state of the ports from different aspects, as shown in Table7-38.

Table7-38 10/100/1000BASE-T autosensing Ethernet port LED description

Ethernet port LED status		Description
Mode LED (MODE) status	Ethernet port LED	Description
Steady green (Link/Active mode)	Steady green	A 1000 Mbps link is present on the port.
	Flashing green	The port is sending or receiving data at 1000 Mbps.
	Steady yellow	A 10/100 Mbps link is present on the port.
	Flashing yellow	The port is sending or receiving data at 10/100 Mbps.
	Off	No link is present on the port.
Flashing green (PoE mode)	Steady green	PoE power supply is normal.
	Flashing green (1 Hz)	· The maximum PoE power provided by the port fails to meet the power requirement of the PD. · The remaining power of the switch fails to meet the power supply requirement of the port.
	Steady yellow	The port has failed to supply power.
	Flashing yellow (3 Hz)	POST has failed on the port.
	Off	The port is not supplying power through PoE.

5G/2.5G/1000BASE-T autosensing Ethernet port LED

The LSWM2MGT8P interface module provides eight 5G/2.5G/1000BASE-T autosensing Ethernet ports. Table7-39 shows the description for the 5G/2.5G/1000BASE-T autosensing Ethernet port LEDs.

Table7-39 5G/2.5G/1000BASE-T autosensing Ethernet port LED description

LED status	Description
Steady green	A 5 Gbps link is present on the port.
Flashing green	The port is sending or receiving data at 5 Gbps.
Steady yellow	A 1/2.5 Gbps link is present on the port.
Flashing yellow	The port is sending or receiving data at 1/2.5 Gbps.
Off	No link is present on the port.

10G/5G/2.5G/1000BASE-T autosensing Ethernet port LED

The LSWM2XMGT8P interface module provides eight 10G/5G/2.5G/1000BASE-T autosensing Ethernet ports. Table7-40 shows the description for the 10G/5G/2.5G/1000BASE-T autosensing Ethernet port LEDs.

Table7-40 10G/5G/2.5G/1000BASE-T autosensing Ethernet port LED description

LED status	Description
Steady green	A 10 Gbps link is present on the port.
Flashing green	The port is sending or receiving data at 10 Gbps.
Steady yellow	A 1/2.5/5 Gbps link is present on the port.
Flashing yellow	The port is sending or receiving data at 1/2.5/5 Gbps.
Off	No link is present on the port.

SFP port LED

Table7-41 SFP port LED description

LED status	Description
Steady green	A 1000 Mbps link is present on the port.
Flashing green	The port is sending or receiving data at 1000 Mbps.
Steady yellow	A 100 Mbps link is present on the port.
Flashing yellow	The port is sending or receiving data at 100 Mbps.
Off	No link is present on the port.

SFP+ port LED

Table7-42 SFP+ port LED description

SFP+ port LED status	Description
Steady green	A 10 Gbps link is present on the port.
Flashing green	The port is sending or receiving data at 10 Gbps.
Steady yellow	A 1 Gbps link is present on the port.
Flashing yellow	The port is sending or receiving data at 1 Gbps.
Off	No link is present on the port. The MODE LED is operating in PoE mode (supported only on PoE models).

SFP28 port LED

Table7-43 SFP28 port LED description

SFP28 port LED status	Description
Steady green	A 25 Gbps link is present on the port.
Flashing green	The port is sending or receiving data at 25 Gbps.
Steady yellow	A 10 Gbps link is present on the port.
Flashing yellow	The port is sending or receiving data at 10 Gbps.
Off	No link is present on the port. The MODE LED is operating in PoE mode (supported only on PoE models).

QSFP+ port LED

The LSWM2QP2P interface module provides two QSFP+ ports. Table7-44 shows the description for the QSFP+ port LEDs.

Table7-44 QSFP+ port LED description

LED status	Description
Steady green	A module has been installed in the port. A link is present on the port and the port is operating at 40 Gbps.
Flashing green	The port is sending or receiving data at 40 Gbps.
Steady yellow	A module has been installed in the port. A link is present on the port and the port is operating at 10 Gbps.
Flashing yellow	The port is sending or receiving data at 10 Gbps.
Off	No module has been installed or no link is present on the port.

QSFP28 port LED

The LSWM2ZQP2P interface module provides two QSFP28 ports. Table7-45 shows the description for the QSFP28 port LEDs.

Table7-45 QSFP28 port LED description

LED status	Description
Steady green	A module has been installed in the port. A link is present on the port and the port is operating at 100 Gbps.
Flashing green	The port is sending or receiving data at 100 Gbps.
Steady yellow	A module has been installed in the port. A link is present on the port and the port is operating at 40 Gbps.
Flashing yellow	The port is sending or receiving data at 40 Gbps.
Off	No module has been installed or no link is present on the port.

Expansion card status LED

For switch models that support expansion cards, the expansion card status LED on the front panel indicates the operating status of the expansion card.

Table7-46 Expansion card status LED description

LED mark	Status	Description
SLOT	Steady green	The expansion card is operating correctly.
	Flashing yellow	The switch does not support the expansion card model, or the expansion card is faulty.
	Off	The expansion slot is empty.

Status LED on a fan tray

Table7-47 Description for the status LED on a FAN-40B-1-F/FAN-40F-1-F fan tray

Status	Description
Off	The fan tray is operating correctly.
Steady yellow	The fan tray is operating incorrectly.

Table7-48 Description for the status LED on an LSPM1FANSA-SN/LSPM1FANSB-SN fan tray

Status	Description
Off	The fan tray is operating correctly.
Steady on	The fan tray is operating incorrectly.

Status LEDs on a 600W/920W/1600W power supply

The PSR600-54A-B, PSR920-54A-B, and PSR1600-54A-B power supplies each have two status LEDs to indicate the power input and output status.

Table7-49 Description for the status LEDs on a 600W/920W/1600W power supply

LED	Mark	Status	Description
Output status LED	OUT OK	Steady green	Normal power output.
		Steady red	Abnormal power output.
		Off	No power output
Input status LED	IN OK	Steady green	Normal power input.
		Steady red	Abnormal power input.
		Off	No power input.

8 Cooling system

To dissipate heat timely and enhance system stability, the switch uses a high-performance cooling system. Consider the site ventilation design when you plan the installation site for the switch.

For switches that support removable fan trays, you can provide airflow from the power supply side to the port side or from the port side to the power supply side for the switch by using different fan trays. For heat dissipation, you must install two fan trays of the same model for the switch. Table8-1 describes fan trays available for the switch.

Table8-1 Fan trays available for the switch

Device model

Fan tray type

Airflow direction

S5580X-24T6Y-EI

S5580X-48T6Y-EI

Removable fan tray: LSBM1FAN4020B (FAN-40B-1-F)

From the power supply side to the port side (S5580X-48T6Y-EI as an example)

Removable fan tray: LSBM1FAN4020F (FAN-40F-1-F)

From the port side to the power supply side (S5580X-48T6Y-EI as an example)

S5580S-24T6X-EI

S5580S-48T6X-EI

Fixed fan trays

From the left side and port side to the right side (S5580S-24T6X-EI as an example)

S5580X-32S8T4X4YC-HI

S5580X-48S4YC-HI

S5580X-32T4X4YC-HI

S5580X-48T4YC-HI

Removable fan tray: LSPM1FANSA-SN

From the port side to the power supply side (S5580X-48T4YC-HI as an example)

S5580X-32S8T4X4YC-HI

S5580X-48S4YC-HI

S5580X-32T4X4YC-HI

S5580X-48T4YC-HI

S5580X-32P4X4YC-HI

S5580X-48P4YC-HI

Removable fan tray: LSPM1FANSB-SN

From the power supply side to the port side (S5580X-48T4YC-HI as an example)

H3C S5580X-EI[HI] & S5580S-EI Switch Series Hardware Information and Specifications-6W101

Technical specifications for the S5580S-EI and S5580X-EI switches

Technical specifications for the S5580X-HI switch series

S5580S-24T6X-EI

4 Removable power supplies

70W power supply (CA-70A12)

View

Functions

Technical specifications

View

Functions

Technical specifications

180W power supplies (PSR180-12A-F and PSR180-12A-B)

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

View

Functions

Technical specifications

About LSWM2QP2P

Ports and LEDs

Technical specifications

About LSWM2MGT8P

Ports and LEDs

About LSWM2XMGT8P

Ports and LEDs

About LSWM2ZQP2P

Ports and LEDs

About LSWM2ZSP8P

Ports and LEDs

About LSPM6FWD

Ports and LEDs

Technical specifications

About LSWM2EC

Ports and LEDs

Technical specifications

About LSWM2-iMC

Ports and LEDs

Technical specifications

About LSWM2SP8P and LSWM2SP8PM

Ports and LEDs

Console port

Management Ethernet port

USB port

SFP+ port (applicable to chassis)

SFP28 port (applicable to chassis)

Power supply status LED

Management Ethernet port LED

SFP+ port LED

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

S 5580S-24T6X-EI