Contents

User profile commands· 1

display user-profile· 1

user-profile· 3

 

User profile commands

display user-profile

Use display user-profile to display configuration and online user information for user profiles.

Syntax

In standalone mode:

display user-profile [ name profile-name ]

In IRF mode:

display user-profile [ name profile-name ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters. Valid characters include English letters, digits, hyphens (-), and underscores (_). The name must start with an English letter or digit, and cannot contain only digits. The name must be globally unique. If you do not specify this option, the command displays configuration and online user information for all user profiles.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays user profile configuration and online user information for all member devices. (In IRF mode.)

Examples

# (In standalone mode.) Display configuration and online user information for user profile aaa.

<Sysname> display user-profile name aaa

  User-Profile: aaa

    Inbound:

      Committed Access Rate:

        Rule: If-match any

          CIR 64 (kbps), CBS 512 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

        Rule: If-match acl 2000

          CIR 3000 (kbps), CBS 187500 (Bytes), EBS 0 (Bytes)

      Policy: p1

    Outbound:

      Committed Access Rate:

        Rule: If-match acl 3000

          CIR 1000 (kbps), CBS 62500 (Bytes), EBS 0 (Bytes)

        Rule: If-match any

          CIR 64 (kbps), CBS 512 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

      Line Rate:

        CIR 32 (kbps), CBS 2048 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

    Priority queuing: pql 1

    General Traffic Shaping:

      CIR 200 (kbps), CBS 12500 (Bytes), EBS 0 (Bytes)

    Overhead compensation length: 18

 

    User user_1:

      Authentication type: Portal

      Network attributes:

        Interface    : GigabitEthernet1/0/1

        MAC address  : 0000-1111-2222

      Failed action list:

        Inbound: Policy p1

        Inbound: CIR 64 (kbps), CBS 2048 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

# (In IRF mode.) Display configuration and online user information for user profile aaa.

<Sysname> display user-profile name aaa

  User-Profile: aaa

    Inbound:

      Committed Access Rate:

        Rule: If-match any

          CIR 64 (kbps), CBS 512 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

        Rule: If-match acl 2000

          CIR 3000 (kbps), CBS 187500 (Bytes), EBS 0 (Bytes)

      Policy: p1

    Outbound:

      Committed Access Rate:

        Rule: If-match acl 3000

          CIR 1000 (kbps), CBS 62500 (Bytes), EBS 0 (Bytes)

        Rule: If-match any

          CIR 64 (kbps), CBS 512 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

      Line Rate:

        CIR 32 (kbps), CBS 2048 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)

    Priority queuing: pql 1

    General Traffic Shaping:

      CIR 200 (kbps), CBS 12500 (Bytes), EBS 0 (Bytes)

    Overhead compensation length: 18

 

    slot 1:

      User user_1:

        User ID: 0x10000002

        Authentication type: Portal

        Network attributes:

          Interface    : GigabitEthernet1/0/1

          MAC address  : 0000-1111-2222

          IP address   : 172.16.187.16

          Service VLAN : 100

Table 1 Command output

Field	Description
User-Profile	User profile name.
Inbound	Policy applied to incoming traffic.
Outbound	Policy applied to outgoing traffic.
CIR	Committed information rate, in kbps.
CBS	Committed burst size, in bytes.
EBS	Excess burst size, in bytes.
PIR	Peak information rate, in kbps.
Policy	Policy name.
Line Rate	Information about user profile-based rate limiting. When the peer-advertise-bandwidth keyword is specified in the qos lr outbound command, this field displays the peer-advertise-bandwidth configuration information.
Priority queuing	Information about priority queuing applied to a user profile.
General Traffic Shaping	Information about GTS applied to a user profile.
User user_1	Username of a user account with which a user profile is associated.
Authentication type	Authentication type: ·     802.1X—802.1X authentication. ·     Portal—Portal authentication. ·     PPP—PPP authentication. ·     MACA—MAC authentication.
Network attributes	Online user information.
Failed action list	Actions that failed to be applied to the user.
Overhead compensation length	Packet compensation length in bytes for outbound traffic policing.
Rule	Match criteria.

 

user-profile

Use user-profile to create a user profile and enter its view, or enter the view of an existing user profile.

Use undo user-profile to delete a user profile.

Syntax

user-profile profile-name

undo user-profile profile-name

Default

No user profiles exist.

Views

System view

Predefined user roles

network-admin

Parameters

profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters. Valid characters include English letters (a-z, A-Z), digits (0-9), hyphens (-), and underscores (_). The name must start with an English letter or digit, and cannot contain only digits. The name must be globally unique.

Examples

# Create user profile a123 and enter the view of a123.

<Sysname> system-view

[Sysname] user-profile a123

[Sysname-user-profile-a123]