Unless otherwise stated, supervisor engine units (SEUs), interface modules, and fabric modules are collectively referred to as "modules" in this document.

Chassis views

The chassis views in this section are for illustration only.

H3C S12500R switch router series includes the S12516R, S12508R, S12504R, S12500R-2XL, and S12500R-2L models.

Figure1-1 S12516R

Figure1-2 S12508R

Figure1-3 S12504R

Figure1-4 S12500R-2XL

Figure1-5 S12500R-2L

Chassis components

The device has the following sections: interface module section, power supply section, fan tray section, fabric module section, and SEU section. The S12500R-2XL and S12500R-2L switch routers do not have a fabric module section. The following figures use the S12500R-2L and S12516R switch routers for illustration.

Figure1-6 Front and rear views of the S12500R-2L switch router

(1) SEU section	(2) Interface module section
(3) Power supply section	(4) Fan tray section

Table1-1 Section descriptions for the S12500R-2L switch router

Section	Location identification	Description
SEU section	The SEU slot number and SEU module identifier are pink marked.	SEUs are required. (No SEUs are provided with the device. Purchase SEUs yourself.) · The device has two SEU slots. You can install one SEU, or two SEUs for redundancy on the device. · To install only one SEU on the device, you can install it in either of the SEU slots.
Interface module section	The ejector lever pillow blocks on the interface module slots are purple marked. The interface module edges and ejector levers are also purple marked to suggest the corresponding installation location.	Interface modules are required. (No interface modules are provided with the device. Purchase interface modules yourself.) · The device has two interface module slots. You can install one or two interface modules for the device as needed. · To install only one interface module for the device, you can install it in either of the interface module slots.
Power supply section	N/A	Power supplies are required. (No power supplies are provided with the device. Purchase power supplies yourself.) · The device has four power supply slots, with two on each side of the chassis rear. · The device supports N+N (dual power inputs) or N+1 (single power input) power supply redundancy. Determine the number of power supplies based on the power supply mode and system power consumption. · You can install a power supply in any of the empty power supply slots.
Fan tray section	The fan tray section is at the rear of the chassis.	Fan trays are required. (No fan trays are provided with the device. Purchase fan trays yourself.) The S12500R-2L provides two fan tray slots FAN1 and FAN2. As a best practice, install two fan trays for redundancy. For the S12500R-2XL, fan trays are provided with the device.

Figure1-7 Front and rear views of the S12516R switch router

(1) SEU section	(2) Interface module section	(3) Power supply section
(4) Fan tray section	(5) Fabric module section

Table1-2 Section descriptions for the S12516R switch router

Section	Location identification	Description
SEU section	· S12516R and S12508R—Ejector levers of the SEUs and ejector lever pillow blocks on the SEU slots are pink marked. The SEU slots are above the interface module slots. · S12504R—The SEU slot numbers and SEU module identifiers are pink marked. The SEU slots are below the interface module slots.	SEUs are required. (No SEUs are provided with the device. Purchase SEUs yourself.) · The S12500R switch router has two SEU slots. You can install one SEU, or two SEUs for redundancy on the device. · To install only one SEU on the device, you can install it in either of the SEU slots.
Interface module section	The ejector lever pillow blocks on interface module slots are purple marked. The interface module edges and ejector levers are also purple marked to suggest the corresponding installation location.	Interface modules are required. (No interface modules are provided with the device. Purchase interface modules yourself.) · S12516R—16 interface module slots. · S12508R—8 interface module slots. · S12504R—4 interface module slots. You can install an interface module in any of the empty interface module slots.
Power supply section	N/A	Power supplies are required. (No power supplies are provided with the device. Purchase power supplies yourself.) · S12516R—16 power supplies slots, with eight on each side of the chassis rear. · S12508R—8 power supplies slots, with four on each side of the chassis rear. · S12504R—4 power supplies slots, with two on each side of the chassis rear. The device supports N+N (dual power inputs) or N+1 (single power input) power supply redundancy. Determine the number of power supplies based on the power supply mode and system power consumption. You can install a power supply in any of the empty power supply slots.
Fan tray section	The fan tray section is at the rear of the chassis. Each fan tray covers three fabric module slots.	Fan trays are required. (No fan trays are provided with the device. Purchase fan trays yourself.) The device provides two fan tray slots FAN1 and FAN2. It can operate correctly with one fan tray. As a best practice, install two fan trays for redundancy. The device installed with only one fan tray can still operate correctly for a short time if the fan tray fails. As a best practice, replace the faulty fan tray as soon as possible.
Fabric module section	Covered by the fan trays.	Fabric modules are required. (No fabric modules or fabric module filler panels are provided with the device. Purchase fabric modules and fabric module filler panels yourself.) · The device comes with the fabric module slots empty. Install two to six fabric modules on the device for N+M redundancy. Install fabric module filler panels in empty fabric module slots. · Each fan tray covers three fabric module slots. To replace a fabric module, remove the fan tray above it.

Table1-3 describes the slot arrangement for removable components.

Table1-3 Slot arrangement for removable components

Model	SEU	Interface module	Fabric module	Power supply	Fan tray
S12516R	Slots 0 and 1	Slots 2 to 17	Slots 18 to 23 · Slots 18 to 20 are covered by FAN 1. · Slots 21 to 23 are covered by FAN 2.	PWR 1 to PWR 16	FAN 1 and FAN 2
S12508R	Slots 0 and 1	Slots 2 to 9	Slots 10 to 15 · Slots 10 to 12 are covered by FAN 1. · Slots 13 to 15 are covered by FAN 2.	PWR 1 to PWR 8	FAN 1 and FAN 2
S12504R	Slots 4 and 5	Slots 0 to 3	Slots 6 to 11 · Slots 6 to 8 are covered by FAN 1. · Slots 9 to 11 are covered by FAN 2.	PWR 1 to PWR 4	FAN 1 and FAN 2
S12500R-2XL	Slots 2 and 3	Slots 0 and 1	N/A	PWR 1 to PWR 4	FAN 1 and FAN 2
S12500R-2L	Slots 0 and 1	Slots 2 and 3	N/A	PWR 1 to PWR 4	FAN 1 and FAN 2

Technical specifications

Weights and dimensions

The device uses modular design. Its weight includes the chassis (including mounting brackets and filler panels) and its removable components (including modules, power supplies, fan trays, interface modules, and other removable components).

Table1-4 Chassis weights and dimensions

Model	Weight	Height	Width	Depth
S12516R	86.1 kg (189.81 lb)	931 mm (36.65 in)/21 RU	440 mm (17.32 in)	857 mm (33.74 in)
S12508R	47.0 kg (103.62 lb)	531 mm (20.91 in)/12 RU	440 mm (17.32 in)	857 mm (33.74 in)
S12504R	36.0 kg (79.37 lb)	264 mm (10.39 in)/6 RU	440 mm (17.32 in)	857 mm (33.74 in)
S12500R-2L	22.6 kg (49.82 lb)	133 mm (5.24 in)/3 RU	440 mm (17.32 in)	895 mm (35.24 in)
S12500R-2XL	46.8 kg (103.17 lb)	264 mm (10.39 in)/6 RU	440 mm (17.32 in)	857 mm (33.74 in)

NOTE:

· Rack height is measured in RUs. One RU is 44.45 mm (1.75 in).

· Table1-4 lists dimensions for the device, excluding the mounting brackets, cable management brackets, modules, and power supplies.

Table1-5 Module weights and dimensions

Model	Weight	Height	Width	Depth
LSXM1SUPER1	6.2 kg (13.67 lb)	43.7 mm (1.72 in)	432.6 mm (17.03 in)	511.7 mm (20.15 in)
LSXM1SUPEAR1	6.4 kg (14.11 lb)	43.7 mm (1.72 in)	432.6 mm (17.03 in)	511.7 mm (20.15 in)
LSXM1SUP02LR1	2.1 kg (4.63 lb)	22.5 mm (0.89 in)	193.0 mm (7.60 in)	364.3 mm (14.34 in)
LSXM1SUP02TR1	2.1 kg (4.63 lb)	22.5 mm (0.89 in)	193.0 mm (7.60 in)	364.3 mm (14.34 in)
LSXM1SUP04TR1	2.7 kg (5.95 lb)	39.8 mm (1.57 in)	200.5 mm (7.89 in)	411.0 mm (16.18 in)
LSXM2SUP02LR1	2.1 kg (4.63 lb)	22.5 mm (0.89 in)	193.0 mm (7.60 in)	364.3 mm (14.34 in)
LSXM2SFH16CR1	7.9 kg (17.42 lb)	39.8 mm (1.57 in)	853.0 mm (33.58 in)	278.4 mm (10.96 in)
LSXM1SFH16ER1	9.7 kg (21.38 lb)	39.8 mm (1.57 in)	853.0 mm (33.58 in)	278.4 mm (10.96 in)
LSXM1SFH08CR1	4.6 kg (10.14 lb)	39.8 mm (1.57 in)	453.0 mm (17.83 in)	278.4 mm (10.96 in)
LSXM1SFH08DR1	4.9 kg (10.80 lb)	39.8 mm (1.57 in)	453.0 mm (17.83 in)	278.4 mm (10.96 in)
LSXM1SFH04DR1	2.8 kg (6.17 lb)	39.8 mm (1.57 in)	243.0 mm (9.57 in)	278.4 mm (10.96 in)
LSXM1SFK16ER1	10.0 kg (22.05 lb)	39.8 mm (1.57 in)	853.0 mm (33.58 in)	278.4 mm (10.96 in)
LSXM1SFK16GR1	11.3 kg (24.91 lb)	39.8 mm (1.57 in)	853.0 mm (33.58 in)	278.4 mm (10.96 in)
LSXM1SFK08ER1	4.8 kg (10.58 lb)	39.8 mm (1.57 in)	453.0 mm (17.83 in)	278.4 mm (10.96 in)
LSXM1SFK08GR1	5.9 kg (13.01 lb)	39.8 mm (1.57 in)	453.0 mm (17.83 in)	278.4 mm (10.96 in)
LSXM1SFK04FR1	3.0 kg (6.67 lb)	39.8 mm (1.57 in)	243.0 mm (9.57 in)	278.4 mm (10.96 in)
LSXM1CGQ48KB1	9.3 kg (20.50 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM2CGQ48KBR1	9.3 kg (20.50 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CDQ24KB1	10.0 kg (22.05 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CCQ48KBR1	10.5 kg (23.15 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CDQ24KBR1	10.0 kg (22.05 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CDQ18KCR1	9.0 kg (19.84 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGMS48KBR1	9.7 kg (21.38 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQFX16KBR1	10.6 kg (23.37 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ36HBR1	11.1 kg (24.47 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ36HFR1	12.3 kg (27.12 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ48KBR1	9.3 kg (20.50 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ72KCR1	14.7 kg (32.41 lb)	100.8 mm (3.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1TGS48HFR1	7.6 kg (16.75 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ18QGHFR1	9.0 kg (19.84 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ6QGHFR1	7.3 kg (16.09 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1TGS48HBR1	7.5 kg (16.53 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1CGQ18QGHBR1	8.3 kg (18.30 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)
LSXM1MOD24KBR1	7.4 kg (16.31 lb)	50.0 mm (1.97 in)	432.6 mm (17.03 in)	519.8 mm (20.46 in)

NOTE:

Module dimensions are expressed in Height (H) × Width (W) × Depth (D) format:

· Height—Height of the front panel of the module.

· Width—Width of the front panel of the module.

· Depth—Depth from the front panel of the module to the connector (including the connector, but excluding the ejector levers and captive screws).

Table1-6 Weights and dimensions of the interface modules available for the LSXM1MOD24KBR1

Model	Weight	Height	Width	Depth
LSXM1CGQ18C1	1.78 kg (3.92 lb)	44.0 mm (1.73 in)	191.0 mm (7.52 in)	271.0 mm (10.67 in)
LSXM1CGQ8C1	1.50 kg (3.31 lb)	44.0 mm (1.73 in)	191.0 mm (7.52 in)	271.0 mm (10.67 in)
LSXM1TGS24C1	1.53 kg (3.37 lb)	44.0 mm (1.73 in)	191.0 mm (7.52 in)	271.0 mm (10.67 in)

Table1-7 Weights and dimensions of the fabric module slot filler panels

Model	Weight	Height	Width	Depth
S12516R fabric module slot filler panel	2.8 kg (6.17 lb)	39.8 mm (1.57 in)	853.6 mm (33.60 in)	136.0 mm (5.35 in)
S12508R fabric module slot filler panel	1.6 kg (3.53 lb)	40.0 mm (1.57 in)	453.0 mm (17.83 in)	133.0 mm (5.24 in)
S12504R fabric module slot filler panel	0.9 kg (1.98 lb)	40.0 mm (1.57 in)	243.0 mm (9.57 in)	136.0 mm (5.35 in)

Table1-8 Weights and dimensions of power supplies

Model	Weight	Height	Width	Depth
PSR1800-56A	1.6 kg (3.53 lb)	40.1 mm (1.58 in)	82.6 mm (3.25 in)	297.7 mm (11.72 in)
PSR1800-56D	2.0 kg (4.41 lb)	40.1 mm (1.58 in)	82.6 mm (3.25 in)	297.7 mm (11.72 in)
PSR2400-54A	1.9 kg (4.19 lb)	41.0 mm (1.61 in)	100.0 mm (3.93 in)	332.0 mm (13.07 in)
PSR2400-54D	1.9 kg (4.19 lb)	41.0 mm (1.61 in)	100.0 mm (3.93 in)	332.0 mm (13.07 in)
PSR3000-54A	2.1 kg (4.63 lb)	41.0 mm (1.61 in)	100.0 mm (3.93 in)	332.0 mm (13.07 in)
PSR3000-54AHD	2.1 kg (4.63 lb)	41.0 mm (1.61 in)	100.0 mm (3.93 in)	332.0 mm (13.07 in)
PSR2400-54AA-B	2.0 kg (4.41 lb)	41.0 mm (1.61 in)	100.0 mm (3.93 in)	332.0 mm (13.07 in)

Table1-9 Weights and dimensions of fan trays

Model	Weight	Height	Width	Depth
S12516R fan tray—LSXM116XFAN	6.7 kg (14.77 lb)	144.0 mm (5.67 in)	927.0 mm (36.50 in)	183.0 mm (7.20 in)
S12516R fan tray —LSXM116XFANH	8.4 kg (18.52 lb)	144.0 mm (5.67 in)	927.0 mm (36.50 in)	183.0 mm (7.20 in)
S12508R fan tray—LSXM108XFAN	3.8 kg (8.38 lb)	144.0 mm (5.67 in)	527.0 mm (20.75 in)	183.0 mm (7.20 in)
S12508R fan tray—LSXM108XFANH	4.4 kg (9.70 lb)	144.0 mm (5.67 in)	527.0 mm (20.75 in)	183.0 mm (7.20 in)
S12504R fan tray—LSXM104XFAN	1.8 kg (3.97 lb)	144.0 mm (5.67 in)	263.0 mm (10.35 in)	97.0 mm (3.82 in)
S12504R fan tray—LSXM104XFANH	3.0 kg (6.61 lb)	144.0 mm (5.67 in)	263.0 mm (10.35 in)	136.0 mm (5.35 in)
S12500R-2XL fan tray—LSXM104XFANH	3.0 kg (6.61 lb)	144.0 mm (5.67 in)	263.0 mm (10.35 in)	136.0 mm (5.35 in)
S12500R-2L fan tray—FAN-120-1-A	1.6 kg (3.53 lb)	123.0 mm (4.84 in)	214.0 mm (8.43 in)	123.0 mm (4.84 in)

Module power consumption and system power consumption

Module power consumption

The device supports varieties of modules that are different in power consumptions. For a module, its power consumption varies by its state. Table1-10 shows the power consumption for different module models.

· The static power consumption of a module refers to the power consumed by the module when module is running but all ports on the module are down and when no transceiver module is available on the optical interface of the module.

· The dynamic power consumption of a module refers to the power consumed by the module when all the ports on the module are link up and send broadcasts.

Table1-10 Module power consumption

Model	Minimum static power consumption	Typical power consumption	Maximum dynamic power consumption
LSXM1SUPER1	52 W	52 W	70 W
LSXM1SUPEAR1	55 W	55 W	65 W
LSXM1SUP02LR1	28 W	28 W	35 W
LSXM1SUP02TR1	26 W	26 W	29 W
LSXM1SUP04TR1	24 W	24 W	35 W
LSXM2SUP02LR1	28 W	28 W	35 W
LSXM2SFH16CR1	194 W	281 W	308 W
LSXM1SFH16ER1	487 W	752 W	816 W
LSXM1SFH08CR1	84 W	117 W	135 W
LSXM1SFH08DR1	159 W	231 W	255 W
LSXM1SFH04DR1	86 W	124 W	140 W
LSXM1SFK16ER1	159 W	226 W	293 W
LSXM1SFK16GR1	471 W	647 W	822 W
LSXM1SFK08ER1	90 W	146 W	157 W
LSXM1SFK08GR1	206 W	277 W	366 W
LSXM1SFK04FR1	91 W	147 W	158 W
LSXM1CGQ48KB1	395 W	447 W	765 W
LSXM2CGQ48KBR1	395 W	447 W	765 W
LSXM1CDQ24KB1	469 W	696 W	1020 W
LSXM1CCQ48KBR1	412 W	564 W	1142 W
LSXM1CDQ24KBR1	469 W	696 W	1020 W
LSXM1CDQ18KCR1	195 W	380 W	850 W
LSXM1CGMS48KBR1	525 W	675 W	1040 W
LSXM1CGQFX16KBR1	330 W	385 W	485 W
LSXM1CGQ36HBR1 (*)	608 W	662 W	1070 W
LSXM1CGQ36HFR1 (*)	585 W	819 W	1100 W
LSXM1CGQ48KBR1	395 W	447 W	765 W
LSXM1CGQ72KCR1	530 W	635 W	980 W
LSXM1TGS48HFR1	136 W	161 W	230 W
LSXM1CGQ18QGHFR1	316 W	425 W	650 W
LSXM1CGQ6QGHFR1	132 W	171 W	325 W
LSXM1TGS48HBR1	111 W	127 W	210 W
LSXM1CGQ18QGHBR1	256 W	326 W	525 W
LSXM1MOD24KBR1	135 W	350 W	577 W

IMPORTANT:

High-performance fan trays are required when the device uses the interface modules marked by (*) in the preceding table. For information about high-performance fan trays, see "Fan trays."

Power consumption of interface modules available for the LSXM1MOD24KBR1

Table1-11 Power consumption of interface modules available for the LSXM1MOD24KBR1

Interface module model	Minimum power consumption	Typical power consumption	Maximum power consumption
LSXM1CGQ18C1	90 W	101 W	169 W
LSXM1CGQ8C1	38 W	49 W	79 W
LSXM1TGS24C1	33 W	35 W	63 W

Fan tray power consumption

The device uses fan trays that can automatically adjust the fan speed based on the device temperature. The power consumed by a fan tray depends on the fan speed.

Table1-12 Fan tray power consumption

Device model	Fan tray model	Minimum power consumption	Typical power consumption	Maximum power consumption
S12516R	LSXM116XFAN	33 W	206 W	793 W
S12516R	LSXM116XFANH	59 W	725 W	2030 W
S12508R	LSXM108XFAN	17 W	103 W	395 W
S12508R	LSXM108XFANH	35 W	410 W	1000 W
S12504R	LSXM104XFAN	14 W	66 W	255 W
S12504R	LSXM104XFANH	19.4 W	87 W	588 W
S12500R-2XL	LSXM104XFANH	19.4 W	87 W	588 W
S12500R-2L	FAN-120-1-A	17 W	31 W	269 W

System power consumption

The system power consumption of the device depends on the type and number of modules and the fan tray power consumption.

· The minimum system power consumption is the total static power consumption of all modules plus the minimum fan tray power consumption.

· The maximum system power consumption is the total dynamic power consumption of all modules plus the maximum fan tray power consumption.

For example, for an S12516R switch router that has two LSXM1SUPKR1 SEUs, two LSXM1CGQ48KBR1 interface modules, six LSXM1SFK16GR1 fabric modules, and five LSXM116XFANH fan trays, the minimum system power consumption of the device is 2 × 50 + 2 × 395 + 6 × 471 + 5 × 33 = 3881 W. The maximum system power consumption of the device is 2 × 60 + 2 × 765 + 6 × 822 + 5 × 793 = 10547 W.

Heat dissipation

Heat dissipation is measured in BTU/h, and 1 W equals 3.4121 BTU/h.

The heat generated by the device is closely related to its power consumption. It is typically assumed that 90% of the power consumption is converted to heat, and the power supply's conversion efficiency is 90%. Heat dissipation/hour of the device is 0.9 × (total power consumption of the modules plus power consumption of the fan trays)/0.9 × 3.4121.

For the power consumption of the modules and fan trays, see "Module power consumption and system power consumption."

Environmental specifications

Table1-13 Environmental specifications

Description	Operating	Non-operating
Temperature	0°C to 40°C (32°F to 104°F)	–40°C to +70°C (–40°F to +158°F)
Relative humidity	5% to 95%, noncondensing	5% to 95%, noncondensing

2 Modules

IMPORTANT:

· You cannot use the speed command to change the speed of a split interface on a module.

· You can only use QSFP+ to SFP+ cables for 10GE interfaces split from a 100GE interface.

NOTE:

For the transceiver modules or cables available for modules, see H3C S12500R Switch Router Series Modules and Transceiver Modules Compatibility Matrixes

NOTE:

Module dimensions are expressed in Height (H) × Width (W) × Depth (D) format:

· Height—Height of the front panel of the module.

· Width—Width of the front panel of the module.

· Depth—Depth from the front panel of the module to the connector (including the connector, but excluding the ejector levers and captive screws).

The device supports varieties of modules that are different in power consumptions. For a module, its power consumption varies by its state.

· The minimum power consumption of a module refers to the power consumed by the module when it is running with all its ports down and its fiber ports not installed with transceiver modules.

· The typical power consumption of a module refers to the power consumed by the module when it is running with 50% of its ports connected and at 50% load.

· The maximum power consumption of a module refers to the power consumed by the module when it is running with all its ports connected and at full load.

Naming conventions

SEU naming conventions

Figure2-1 SEU naming conventions

Table2-1 SEU naming conventions

No.	Description
1	Product line. LS represents the switch router product line.
2	Product series, which is fixed at X.
3	Distinguisher.
4	Module type.
5	SEU type.
6	Extended attribute.

Interface module naming conventions

Figure2-2 Interface module naming conventions

Table2-2 Interface module naming conventions

No.	Description
1	Product line. LS represents the switch router product line.
2	Product series, which is fixed at X.
3	Distinguisher.
4	Main interface type.
5	Number of main interfaces.
6	Interface module type.
7	Extended attribute.

Fabric module naming conventions

Figure2-3 Fabric module naming conventions

Table2-3 Fabric module naming conventions

No.	Description
1	Product line. LS represents the switch router product line.
2	Product series, which is fixed at X.
3	Distinguisher.
4	Module type. SF represents the fabric module.
5	Fabric module type. Values include: · K—Type K fabric module. · H—Type H fabric module.
6	Compatible device model: · 16 represents that the fabric module is compatible with the S12516R. · 08 represents that the fabric module is compatible with the S12508R. · 04 represents that the fabric module is compatible with the S12504R.
7	Fabric module class.
8	Extended attribute.

Module compatibility matrixes

Table2-4 Module compatibility matrix

Device model	SEU	Fabric module	Interface module
S12516R	· LSXM1SUPER1 · LSXM1SUPEAR1	· LSXM2SFH16CR1 · LSXM1SFH16ER1 · LSXM1SFK16ER1 · LSXM1SFK16GR1	Type H interface modules (LSXM1TGS48HFR1 for example) and Type K interface modules (LSXM1CGQ48KBR1 for example)
S12508R	· LSXM1SUPER1 · LSXM1SUPEAR1	· LSXM1SFH08CR1 · LSXM1SFH08DR1 · LSXM1SFK08ER1 · LSXM1SFK08GR1
S12504R	LSXM1SUP04TR1	· LSXM1SFH04DR1 · LSXM1SFK04FR1
S12500R-2L	· LSXM1SUP02LR1 · LSXM1SUP02TR1 · LSXM2SUP02LR1	N/A	Type K interface modules, excluding the LSXM1CDQ24KBR1, LSXM1CCQ48KBR1, and LSXM1CDQ18KCR1
S12500R-2XL	LSXM1SUP04TR1	N/A	· LSXM1CGQ72KCR1 · LSXM1CDQ18KCR1

Restriction and guidelines

To verify compatibility of modules with the software release you are using, see the release notes.

For the transceiver modules or cables available for modules, see H3C S12500R Switch Router Series Modules and Transceiver Modules Compatibility Matrixe.

SEUs

SEUs are the core component of the system control plane. You can install one SEU, or two SEUs for redundancy on the device. Do not install SEUs of different models on the same device.

You can access and configure the device through the serial console port or the mini USB console port. Only one port is active at a time.

To connect a USB device to the module, make sure the USB device is in good condition.

Set the same speed and duplex mode for a management Ethernet port and its peer port.

If multiple management ports are connected to one remote switch router, you must assign their peer ports to different VLANs on the remote switch router. Then, you can transfer startup software images to the flash on the device through TFTP or FTP.

Interface modules

To obtain the fabric module models on an operating device, execute the display device command.

The LSXM1MOD24KBR1 flexible line processing platform module supports various interface modules. For more information, see "Interface modules available for the LSXM1MOD24KBR1 flexible line processing platform module."

Fabric modules

Before you install a fabric module, remove the protection box from it.

The fabric module slots are covered by fan trays. You must install the fabric modules before you install the fan trays. To remove a fabric module, first remove the fan tray that covers it.

Before you install a fabric module, press the buttons on the ejector levers to release them. After the fabric module is fully seated into slot, close the ejector levers. Before you remove a fabric module, press the buttons on the ejector levers to release them, open the ejector levers, and then pull the fabric module out of the slot.

Before you install a fabric module, make sure the air baffle is closed. After you remove a fabric module, close the air baffle.

Do not install fabric modules of different models on the same device.

SEUs

LSXM1SUPER1

View

Figure2-4 LSXM1SUPER1 view

Technical specifications

Table2-5 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
DDR	32 GB DDR4 (two DIMM slots)
Flash	4 GB EMMC
NVRAM	512 KB
SSD	240 GB (SATA)
Power consumption	52 W to 70 W
Connector type	· RJ-45 · LC · USB (Type A) · Mini USB (Type AB)
Port	· 1 × RJ-45 console port · 1 × mini USB console port · 2 × 10/100/1000BASE-T management and upgrade ports · 2 × GE SFP management and upgrade ports · 1 × USB port (USB 3.0, host port) · 2 × 1PPS/TOD time synchronization ports · 2 × SMB clock input ports · 2 × SMB clock output ports
Transmission baud rate	· Console port: ≤ 115200 bps. The default value is 9600 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps · SFP port: 1000 Mbps
Transmission medium and max transmission distance of the console port	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Transmission medium and max transmission distance of the 10/100/1000BASE-T port	Category-5 twisted pair cable, with a transmission distance of 100 m (328.08 ft)
Hot swapping	Supported
Compliant standard	· Serial console port: Duplex Universal Asynchronous Receiver/Transmitter (duplex UART) · Mini USB console port: Universal Asynchronous Receiver/Transmitter (UART) · 10/100/1000BASE-T management port: IEEE802.3ab · SFP management port: IEEE802.3z · USB: IEEE802.3ba
Compatible device models	· S12516R · S12508R

Ports and LEDs

Figure2-5 LSXM1SUPER1 front panel

(1) 10/100/1000BASE-T management Ethernet port LED (LINK)	(2) 10/100/1000BASE-T management Ethernet port LED (ACT)
(3) SEU active/standby status LED (ACT)	(4) Power supply status LED (PWR)
(5) Fan tray status LED (FAN)	(6) SFP management Ethernet port LED (LINK/ACT)
(7) Module status LED (SLOT)

Table2-6 LED description

LED	LED status	Description
10/100/1000BASE-T management Ethernet port LED	LINK: Off ACT: Off	No link is present on the port.
	LINK: Steady green ACT: Off	A 1000 Mbps link is present on the port.
	LINK: Steady orange ACT: Off	A 10/100 Mbps link is present on the port.
	LINK: Steady green ACT: Flashing yellow	The port is receiving or sending data at 1000 Mbps.
	LINK: Steady orange ACT: Flashing yellow	The port is receiving or sending data at 10/100 Mbps.
SFP management Ethernet port LED	Flashing	The port is receiving or sending data.
	On	A link is present on the port.
	Off	No link is present on the port.
Fan tray status LED	Steady green	All fan trays are present and operating correctly.
	Steady red	A fan tray is faulty, or no or only one fan tray is operating correctly.
	Off	The device is not powered on.
Power supply status LED	Steady green	All present power supplies are operating correctly.
	Steady red	One or more power supplies are faulty.
	Off	The device is not powered on.
Module status LED	Flashing green (once every two seconds)	The module in the corresponding slot is operating correctly.
	Flashing green (four times per second)	The module in the corresponding slot is loading software. If the module remains in this state, the software version running on the device is incompatible with the module.
	Steady green	The module in the corresponding slot is starting up.
	Steady red	A high severity alarm has occurred on the module in the corresponding slot or the module in the corresponding slot has failed.
	Flashing red (once every four seconds)	The temperature of the module in the corresponding slot is abnormal. The temperature is higher than the upper temperature threshold or lower than the lower temperature threshold.
	Off	The module is not present or the module is faulty.
SEU active/standby status LED	On	The SEU is in active state.
SEU active/standby status LED	Off	The following are the possible causes: · The SEU is in standby state. · The SEU is faulty. To further determine the SEU status, see the module status LED description.

LSXM1SUPEAR1

View

Figure2-6 LSXM1SUPEAR1 view

Technical specifications

Table2-7 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
DDR	32 GB DDR4 (two DIMM slots)
Flash	4 GB EMMC
NVRAM	512 KB
Power consumption	54 W to 64 W
Connector type	· RJ-45 · LC · USB (Type A) · Mini USB (Type AB)
Port	· 1 × RJ-45 console port · 1 × mini USB console port · 2 × 10/100/1000BASE-T management and upgrade ports · 2 × GE SFP management and upgrade ports · 1 × USB port (USB 3.0, host port) · 2 × 1PPS/TOD time synchronization ports · 2 × SMB clock input ports · 2 × SMB clock output ports
Transmission baud rate	· Console port: ≤ 115200 bps. The default value is 9600 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps · SFP port: 1000 Mbps
Transmission medium and max transmission distance of the console port	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Transmission medium and max transmission distance of the 10/100/1000BASE-T port	Category-5 twisted pair cable, with a transmission distance of 100 m (328.08 ft)
Hot swapping	Supported
Compliant standard	· Serial console port: Duplex Console port: Duplex Universal Asynchronous Receiver/Transmitter (duplex UART) · Mini USB console port: Universal Asynchronous Receiver/Transmitter (UART) · Management 10/100/1000BASE-T port: IEEE802.3ab · SFP management port: IEEE802.3z · USB: IEEE802.3ba
Compatible device models	· S12516R · S12508R

Ports and LEDs

Figure2-7 LSXM1SUPEAR1 front panel

(1) Module status LED (SLOT)	(2) SFP management Ethernet port LED (LINK/ACT)
(3) SFP management Ethernet port LED (LINK/ACT)	(4) 10/100/1000BASE-T management Ethernet port LED (LINK)
(5) 10/100/1000BASE-T management Ethernet port LED (ACT)	(6) Fan tray status LED (FAN)
(7) Power supply status LED (PWR)	(8) SEU active/standby status LED (ACT)

Table2-8 LED description

LED	LED status	Description
10/100/1000BASE-T management Ethernet port LED	LINK: Off ACT: Off	No link is present on the port.
	LINK: Steady green ACT: Off	A 1000 Mbps link is present on the port.
	LINK: Steady orange ACT: Off	A 10/100 Mbps link is present on the port.
	LINK: Steady green ACT: Flashing yellow	The port is receiving or sending data at 1000 Mbps.
	LINK: Steady orange ACT: Flashing yellow	The port is receiving or sending data at 10/100 Mbps.
SFP management Ethernet port LED	Flashing	The port is receiving or sending data.
	On	A link is present on the port.
	Off	No link is present on the port.
Fan tray status LED	Steady green	All fan trays are present and operating correctly.
	Steady red	A fan tray is faulty, or no or only one fan tray is operating correctly.
	Off	The device is not powered on.
Power supply status LED	Steady green	All present power supplies are operating correctly.
	Steady red	One or more power supplies are faulty.
	Off	The device is not powered on.
Module status LED	Flashing green (once every two seconds)	The module in the corresponding slot is operating correctly.
	Flashing green (four times per second)	The module in the corresponding slot is loading software. If the module remains in this state, the software version running on the device is incompatible with the module.
	Steady green	The module in the corresponding slot is starting up.
	Steady red	A high severity alarm has occurred on the module in the corresponding slot or the module in the corresponding slot has failed.
	Flashing red (once every four seconds)	The temperature of the module in the corresponding slot is abnormal. The temperature is higher than the upper temperature threshold or lower than the lower temperature threshold.
	Off	The module is not present or the module is faulty.
SEU active/standby status LED	On	The SEU is in active state.
SEU active/standby status LED	Off	The following are the possible causes: · The SEU is in standby state. · The SEU is faulty. To further determine the SEU status, see the module status LED description.

LSXM1SUP04TR1

View

Figure2-8 LSXM1SUP04TR1 view

Technical specifications

Table2-9 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM (two DIMM slots)
Flash	8 GB EMMC
NVRAM	512 KB
Power consumption	24 W to 35 W
Connector type	· RJ-45 · LC · USB (Type A)
Port	· 1 × console port · 1 × 10/100/1000BASE-T management and upgrade port · 1 × GE SFP management and upgrade port · 1 × USB port (USB 2.0, host port) · 2 × 1PPS/TOD time synchronization ports · 2 × SMB clock input ports · 2 × SMB clock output ports
Transmission baud rate	· Console port: ≤ 115200 bps. The default value is 9600 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps · SFP port: 1000 Mbps
Transmission medium and max transmission distance of the console port	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Transmission medium and max transmission distance of the 10/100/1000BASE-T port	Category-5 twisted pair cable, with a transmission distance of 100 m (328.08 ft)
Hot swapping	Supported
Compliant standard	· Serial console port: Duplex Universal Asynchronous Receiver/Transmitter (duplex UART) · 10/100/1000BASE-T management port: IEEE802.3ab · SFP management port LED: IEEE802.3z · USB: IEEE802.3ba
Compatible device models	S12504R

Ports and LEDs

Figure2-9 LSXM1SUP04TR1 front panel

(1) Power supply status LED (PWR)	(2) SEU active/standby status LED (ACTIVE)
(3) Module status LED (SLOT)	(4) Fan tray status LED (FAN)
(5) 10/100/1000BASE-T management Ethernet port LED	(6) SFP management Ethernet port LED

Table2-10 LED description

LED	LED status	Description
Management Ethernet port LED	Flashing	The port is receiving or sending data.
	On	A link is present on the port.
	Off	No link is present on the port.
Fan tray status LED	Steady green	All fan trays are present and operating correctly.
	Steady red	A fan tray is faulty, or no or only one fan tray is operating correctly.
	Off	The device is not powered on.
Power supply status LED	Steady green	All present power supplies are operating correctly.
	Steady red	One or more power supplies are faulty.
	Off	The device is not powered on.
Module status LED	Flashing green (once every two seconds)	The module in the corresponding slot is operating correctly.
	Flashing green (four times per second)	The module in the corresponding slot is loading software. If the module remains in this state, the software version running on the device is incompatible with the module.
	Steady green	The module in the corresponding slot is starting up.
	Steady red	A high severity alarm has occurred on the module in the corresponding slot or the module in the corresponding slot has failed.
	Flashing red (once every four seconds)	The temperature of the module in the corresponding slot is abnormal. The temperature is higher than the upper temperature threshold or lower than the lower temperature threshold.
	Off	The module is not present or the module is faulty.
SEU active/standby status LED	On	The SEU is in active state.
SEU active/standby status LED	Off	The following are the possible causes: · The SEU is in standby state. · The SEU is faulty. To further determine the SEU status, see the module status LED description.

LSXM1SUP02LR1

View

Figure2-10 LSXM1SUP02LR1 view

Technical specifications

Table2-11 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	One 16 GB DDR4 SDRAM (two DIMM slots)
Flash	8 GB EMMC
NVRAM	512 KB
Power consumption	28 W to 35 W
Connector type	· RJ-45 · LC · USB (Type A)
Port	· 1 × console port · 1 × 10/100/1000BASE-T management and upgrade port · 1 × GE SFP management and upgrade port · 1 × USB port (USB 2.0, host port)
Transmission baud rate	· Console port: ≤ 115200 bps. The default value is 9600 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps · SFP port: 1000 Mbps
Transmission medium and max transmission distance of the console port	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Transmission medium and max transmission distance of the 10/100/1000BASE-T port	Category-5 twisted pair cable, with a transmission distance of 100 m (328.08 ft)
Hot swapping	Supported
Compliant standard	· Serial console port: Duplex Universal Asynchronous Receiver/Transmitter (duplex UART) · 10/100/1000BASE-T management port: IEEE802.3ab · SFP management port: IEEE802.3z · USB: IEEE802.3ba
Compatible device models	S12500R-2L

Ports and LEDs

Figure2-11 LSXM1SUP02LR1 front panel

(1) Power supply status LED (PWR)	(2) Module status LED (SLOT)
(3) SEU active/standby status LED (ACTIVE)	(4) 10/100/1000BASE-T management Ethernet port LED
(5) SFP management Ethernet port LED	(6) Fan tray status LED (FAN)

Table2-12 LED description

LED	LED status	Description
Management Ethernet port LED	Flashing	The port is receiving or sending data.
	On	A link is present on the port.
	Off	No link is present on the port.
Fan tray status LED	Steady green	All fan trays are present and operating correctly.
	Steady red	A fan tray is faulty, or no or only one fan tray is operating correctly.
	Off	The device is not powered on.
Power supply status LED	Steady green	All present power supplies are operating correctly.
	Steady red	One or more power supplies are faulty.
	Off	The device is not powered on.
Module status LED	Flashing green (once every two seconds)	The module in the corresponding slot is operating correctly.
	Flashing green (four times per second)	The module in the corresponding slot is loading software. If the module remains in this state, the software version running on the device is incompatible with the module.
	Steady green	The module in the corresponding slot is starting up.
	Steady red	A high severity alarm has occurred on the module in the corresponding slot or the module in the corresponding slot has failed.
	Flashing red (once every four seconds)	The temperature of the module in the corresponding slot is abnormal. The temperature is higher than the upper temperature threshold or lower than the lower temperature threshold.
	Off	The module is not present or the module is faulty.
SEU active/standby status LED	On	The SEU is in active state.
SEU active/standby status LED	Off	The following are the possible causes: · The SEU is in standby state. · The SEU is faulty. To further determine the SEU status, see the module status LED description.

LSXM1SUP02TR1

View

Figure2-12 LSXM1SUP02TR1 view

Technical specifications

Table2-13 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	One 16 GB DDR4 SDRAM (two DIMM slots)
Flash	8 GB EMMC
NVRAM	512 KB
Power consumption	28 W to 35 W
Connector type	· RJ-45 · LC · USB (Type A) · Coaxial RF connector
Port	· 1 × console port · 1 × 10/100/1000BASE-T management and upgrade port · 1 × GE SFP management and upgrade port · 1 × USB port (USB 2.0, host port) · 1 × SMB clock input port · 1 × SMB clock output port · 1 × 1PPS/TOD time synchronization port
Transmission baud rate	· Console port: ≤ 115200 bps. The default value is 9600 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps · SFP port: 1000 Mbps
Transmission medium and max transmission distance of the console port	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Transmission medium and max transmission distance of the 10/100/1000BASE-T port	Category-5 twisted pair cable, with a transmission distance of 100 m (328.08 ft)
Hot swapping	Supported
Compliant standard	· Serial console port: Duplex Universal Asynchronous Receiver/Transmitter (duplex UART) · 10/100/1000BASE-T management port: IEEE802.3ab · SFP management port: IEEE802.3z · USB: IEEE802.3ba
Compatible device models	S12500R-2L

Ports and LEDs

Figure2-13 LSXM1SUP02TR1 front panel

(1) Fan tray status LED (FAN)	(2) Power supply status LED (PWR)
(3) Module status LED (SLOT)	(4) SEU active/standby status LED (ACTIVE)
(5) SFP management Ethernet port LED	(6) 10/100/1000BASE-T management Ethernet port LED

Table2-14 LED description

LED	LED status	Description
Management Ethernet port LED	Flashing	The port is receiving or sending data.
	On	A link is present on the port.
	Off	No link is present on the port.
Fan tray status LED	Steady green	All fan trays are present and operating correctly.
	Steady red	A fan tray is faulty, or no or only one fan tray is operating correctly.
	Off	The device is not powered on.
Power supply status LED	Steady green	All present power supplies are operating correctly.
	Steady red	One or more power supplies are faulty.
	Off	The device is not powered on.
Module status LED	Flashing green (once every two seconds)	The module in the corresponding slot is operating correctly.
	Flashing green (four times per second)	The module in the corresponding slot is loading software. If the module remains in this state, the software version running on the device is incompatible with the module.
	Steady green	The module in the corresponding slot is starting up.
	Steady red	A high severity alarm has occurred on the module in the corresponding slot or the module in the corresponding slot has failed.
	Flashing red (once every four seconds)	The temperature of the module in the corresponding slot is abnormal. The temperature is higher than the upper temperature threshold or lower than the lower temperature threshold.
	Off	The module is not present or the module is faulty.
SEU active/standby status LED	On	The SEU is in active state.
SEU active/standby status LED	Off	The following are the possible causes: · The SEU is in standby state. · The SEU is faulty. To further determine the SEU status, see the module status LED description.

LSXM2SUP02LR1

View

Figure2-14 LSXM2SUP02LR1 view

Technical specifications

Table2-15 Technical specification

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	32 GB DDR4 SDRAM
Flash	8 GB EMMC
NVRAM	512 KB
Power consumption	28 W to 35 W
Connector type	· RJ-45 · LC · USB (Type A)
Port	· 1 × console port · 1 × 10/100/1000BASE-T management and upgrade port · 1 × GE SFP management and upgrade port · 1 × USB port (USB 2.0, host port)
Transmission baud rate	· Console port: ≤ 115200 bps. The default value is 9600 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps · SFP port: 1000 Mbps
Transmission medium and max transmission distance of the console port	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Transmission medium and max transmission distance of the 10/100/1000BASE-T port	Category-5 twisted pair cable, with a transmission distance of 100 m (328.08 ft)
Compatible device models	S12500R-2L

Ports and LEDs

Figure2-15 LSXM2SUP02LR1 front panel

(1) Fan tray status LED (FAN)	(2) Power supply status LED (PWR)
(3) Module status LED (SLOT)	(4) SEU active/standby status LED (ACTIVE)
(5) SFP management Ethernet port LED	(6) 10/100/1000BASE-T management Ethernet port LED

Table2-16 LED description

LED	LED status	Description
Management Ethernet port LED	Flashing	The port is receiving or sending data.
	On	A link is present on the port.
	Off	No link is present on the port.
Fan tray status LED	Steady green	All fan trays are present and operating correctly.
	Steady red	A fan tray is faulty, or no or only one fan tray is operating correctly.
	Off	The device is not powered on.
Power supply status LED	Steady green	All present power supplies are operating correctly.
	Steady red	One or more power supplies are faulty.
	Off	The device is not powered on.
Module status LED	Flashing green (once every two seconds)	The module in the corresponding slot is operating correctly.
	Flashing green (four times per second)	The module in the corresponding slot is loading software. If the module remains in this state, the software version running on the device is incompatible with the module.
	Steady green	The module in the corresponding slot is starting up.
	Steady red	A high severity alarm has occurred on the module in the corresponding slot or the module in the corresponding slot has failed.
	Flashing red (once every four seconds)	The temperature of the module in the corresponding slot is abnormal. The temperature is higher than the upper temperature threshold or lower than the lower temperature threshold.
	Off	The module is not present or the module is faulty.
SEU active/standby status LED	On	The SEU is in active state.
SEU active/standby status LED	Off	The following are the possible causes: · The SEU is in standby state. · The SEU is faulty. To further determine the SEU status, see the module status LED description.

Type K 400G interface modules

LSXM1CDQ24KB1

View

Figure2-16 LSXM1CDQ24KB1 view

Technical specifications

Table2-17 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	469 W to 1020 W
Port	24 × 400G QSFP-DD ports
Transmission baud rate	400 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-17 LSXM1CDQ24KB1 front panel

(1) 400G QSFP-DD port

(2) 400G QSFP-DD port LED

Table2-18 LED description

LED	LED status	Description
QSFP-DD fiber port LED	Flashing	The QSFP-DD port is sending or receiving data.
	On	A link is present on the QSFP-DD port.
	Off	No link is present on the QSFP-DD port.

LSXM1CDQ24KBR1

View

Figure2-18 LSXM1CDQ24KBR1 view

Technical specifications

Table2-19 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	469 W to 1020 W
Port	24 × 400G QSFP-DD ports
Transmission baud rate	400 Gbps
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-19 LSXM1CDQ24KBR1 front panel

(1) 400G QSFP-DD port

(2) 400G QSFP-DD port LED

Table2-20 LED description

LED	LED status	Description
QSFP-DD fiber port LED	Flashing	The QSFP-DD port is sending or receiving data.
	On	A link is present on the QSFP-DD port.
	Off	No link is present on the QSFP-DD port.

LSXM1CDQ18KCR1

View

Figure2-20 LSXM1CDQ18KCR1 view

Technical specifications

Table2-21 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	195 W to 850 W
Port	18 × 400G QSFP-DD ports
Transmission baud rate	400 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2XL
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-21 LSXM1CDQ18KCR1 front panel

(1) 400G QSFP-DD port

(2) 400G QSFP-DD port LED

Table2-22 LED description

LED	LED status	Description
QSFP-DD fiber port LED	Flashing	The QSFP-DD port is sending or receiving data.
	On	A link is present on the QSFP-DD port.
	Off	No link is present on the QSFP-DD port.

Type K 200G interface modules

LSXM1CCQ48KBR1

View

Figure2-22 LSXM1CCQ48KBR1 view

Technical specifications

Table2-23 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	412 W to 1142 W
Port	48 × 200G QSFP56 ports
Transmission baud rate	200 Gbps
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-23 LSXM1CCQ48KBR1 front panel

(1) 200G QSFP56 port	(2) 200G QSFP56 port LED

Table2-24 LED description

LED	LED status	Description
QSFP56 fiber port LED	Flashing	The QSFP56 port is sending or receiving data.
	On	A link is present on the QSFP56 port.
	Off	No link is present on the QSFP56 port.

Type K 100G interface modules

LSXM1CGQ72KCR1

View

Figure2-24 LSXM1CGQ72KCR1 view

Technical specifications

Table2-25 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	335 W to 865 W
Port	Three kinds of interface modes: · 72 ×100G QSFP28 ports · 36 × 200G QSFP56 ports · 18 × 200G QSFP56 fiber ports and 36 × 100G QSFP28 fiber ports A QSFP56 fiber port acts as a QSFP28 fiber port when it operates at 100 Gbps.
Transmission baud rate	· QSFP28 port: 100 Gbps and 40 Gbps · QSFP56 port: 200 Gbps, 100 Gbps, and 40 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L · S12500R-2XL
Compatible fabric modules	Type K fabric modules (build-in design for S12500R-2L and S12500R-2XL)

Ports and LEDs

Figure2-25 LSXM1CGQ72KCR1 front panel

(1) 200G QSFP56 port LED	(2) 100G QSFP56 port
(3) 100G QSFP28 port	(4) 200G QSFP28 port LED

Table2-26 LED description

LED	LED status	Description
QSFP56 fiber port LED QSFP28 fiber port LED	Flashing	The QSFP56 or QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP56 or QSFP28 port.
	Off	No link is present on the QSFP56 or QSFP28 port.

LSXM1CGQ48KB1

View

Figure2-26 LSXM1CGQ48KB1 view

Technical specifications

Table2-27 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	395 W to 765 W
Port	48 × 100G QSFP28 ports
Transmission baud rate	100 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-27 LSXM1CGQ48KB1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-28 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM2CGQ48KBR1

View

Figure2-28 LSXM2CGQ48KBR1 view

Technical specifications

Table2-29 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	32 GB DDR4 SDRAM
Power consumption	395 W to 765 W
Port	48 × 100G QSFP28 ports
Transmission baud rate	100 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-29 LSXM2CGQ48KBR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-30 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM1CGMS48KBR1

View

Figure2-30 LSXM1CGMS48KBR1 view

Technical specifications

Table2-31 Technical specifications

Item	Specification
Processor	x86 (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	525 W to 1039 W
Port	48 × 100G QSFP28 ports (support MACsec)
Transmission baud rate	100 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-31 LSXM1CGMS48KBR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-32 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM1CGQ48KBR1

View

Figure2-32 LSXM1CGQ48KBR1 view

Technical specifications

Table2-33 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	395 W to 765 W
Port	48 × 100G QSFP28 ports
Transmission baud rate	100 Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-33 LSXM1CGQ48KBR1 front panel

(1) 100G QSFP28 fiber port LED	(2) 100G QSFP28 fiber port

Table2-34 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM1CGQFX16KBR1

View

Figure2-34 LSXM1CGQFX16KBR1 view

Technical specifications

Table2-35 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	332 W to 484 W
Port	16 × 100G QSFP28 ports (support FlexE)
Transmission baud rate	100 Gbps and 40Gbps
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Ports and LEDs

Figure2-35 LSXM1CGQFX16KBR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-36 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

Type K 24KBR flexible line processing platform modules

LSXM1MOD24KBR1

View

Figure2-36 LSXM1MOD24KBR1 view

(1) Interface module slot 1 (installed with a subcard filler panel)
(2) Interface module slot 2 (installed with a subcard filler panel)

Technical specifications

Table2-37 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	16 GB DDR4 SDRAM
Power consumption	135 W to 557 W (The actual power consumption depends on the interface modules installed on the module.)
Slots	You can install two interface modules on the module. For the compatible interface modules, see "Interface modules available for the LSXM1MOD24KBR1 flexible line processing platform module."
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2L
Compatible fabric modules	Type K fabric modules

Type H 100G interface modules

LSXM1CGQ36HBR1

View

Figure2-37 LSXM1CGQ36HBR1 view

Technical specifications

Table2-38 Technical specifications

Item	Specification
Processor	MIPS 64 (dual-core) @ 1.2 GHz
SDRAM	16 GB DDR3 SDRAM
Power consumption	608 W to 1070 W
Port	36 × QSFP28 ports
Transmission baud rate	100 Gbps and 40 Gbps
Hot swapping	Supported
Compatible device models	· S12516R (configured with high performance fan trays) · S12508R (configured with high performance fan trays) · S12504R (configured with high performance fan trays)
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-38 LSXM1CGQ36HBR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-39 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM1CGQ36HFR1

View

Figure2-39 LSXM1CGQ36HFR1 view

Technical specifications

Table2-40 Technical specifications

Item	Specification
Processor	MIPS64 (dual-core) @ 1.2 GHz
SDRAM	16 GB DDR3 SDRAM
Power consumption	585 W to 1100 W
Port	36 × USB 2.0 ports
Transmission baud rate	100 Gbps and 40 Gbps
Hot swapping	Supported
Compatible device models	· S12516R (configured with high performance fan trays) · S12508R (configured with high performance fan trays) · S12504R (configured with high performance fan trays)
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-40 LSXM1CGQ36HFR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-41 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM1CGQ18QGHBR1

View

Figure2-41 LSXM1CGQ18QGHBR1 view

Technical specifications

Table2-42 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	256 W to 525 W
Port	18 × 100G QSFP28 ports and 18 × 40G QSFP+ ports Or 36 × 40G QSFP+ ports A QSFP28 port acts as a QSFP+ port when it operates at 40 Gbps.
Transmission baud rate	100 Gbps and 40 Gbps
Hot swapping	Supported
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-42 LSXM1CGQ18QGHBR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED
(3) 40G QSFP+ fiber port	(4) 40G QSFP+ fiber port LED

Table2-43 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.
QSFP+ port LED	Flashing	The QSFP+ port is sending or receiving data.
	On	A link is present on the QSFP+ port.
	Off	No link is present on the QSFP+ port.

LSXM1CGQ18QGHFR1

View

Figure2-43 LSXM1CGQ18QGHFR1 view

Technical specifications

Table2-44 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	316 W to 650 W
Port	18 × 100G QSFP 28 ports and 18 × 40G QSFP+ ports Or 36 × 40G QSFP+ ports A QSFP28 port acts as a QSFP+ port when it operates at 40 Gbps.
Transmission baud rate	· 100G QSFP28 port: 100/40 Gbps · 40G QSFP+ port: 40 Gbps
Hot swapping	Supported
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-44 LSXM1CGQ18QGHFR1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED
(3) 40G QSFP+ fiber port	(4) 40G QSFP+ fiber port LED

Table2-45 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.
QSFP+ port LED	Flashing	The QSFP+ port is sending or receiving data.
	On	A link is present on the QSFP+ port.
	Off	No link is present on the QSFP+ port.

LSXM1CGQ6QGHFR1

View

Figure2-45 LSXM1CGQ6QGHFR1 view

Technical specifications

Table2-46 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	132 W to 325 W
Port	6 × 100G QSFP28 ports and 6 × 40G QSFP+ ports Or 12 × 40G QSFP+ ports A QSFP28 port acts as a QSFP+ port when it operates at 40 Gbps.
Transmission baud rate	· 100G QSFP28 ports: 100 Gbps and 40 Gbps · 40G QSFP+ port: 40 Gbps
Hot swapping	Supported
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-46 LSXM1CGQ6QGHFR1 front panel

(1) 40G QSFP+ fiber port	(2) 40G QSFP+ fiber port LED
(3) 100G QSFP28 fiber port	(4) 100G QSFP28 fiber port LED

Table2-47 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.
QSFP+ port LED	Flashing	The QSFP+ port is sending or receiving data.
	On	A link is present on the QSFP+ port.
	Off	No link is present on the QSFP+ port.

Type H 10G interface modules

LSXM1TGS48HBR1

View

Figure2-47 LSXM1TGS48HBR1 view

Technical specifications

Table2-48 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	111 W to 210 W
Port	48 × 10G SFP+ ports
Transmission baud rate	10 Gbps
Hot swapping	Supported
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-48 LSXM1TGS48HBR1 front panel

(1) SFP+ fiber port	(2) SFP+ fiber port LED

Table2-49 LED description

LED status	Description
Flashing	The SFP+ port is sending or receiving data.
On	A link is present on the SFP+ port.
Off	No link is present on the SFP+ port.

LSXM1TGS48HFR1

View

Figure2-49 LSXM1TGS48HFR1 view

Technical specifications

Table2-50 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	136 W to 230 W
Port	48 × 10G SFP+ ports
Transmission baud rate	10 Gbps
Hot swapping	Supported
Compatible device models	· S12516R · S12508R · S12504R
Compatible fabric modules	Type H fabric modules

Ports and LEDs

Figure2-50 LSXM1TGS48HFR1 front panel

(1) SFP+ fiber port	(2) SFP+ fiber port LED

Table2-51 LED description

LED status	Description
Flashing	The SFP+ port is sending or receiving data.
On	A link is present on the SFP+ port.
Off	No link is present on the SFP+ port.

Interface modules available for the LSXM1MOD24KBR1 flexible line processing platform module

Table2-52 Interface modules available for the LSXM1MOD24KBR1

Model	Description	Port quantity and type
LSXM1CGQ18C1	18-port 100GBASE Ethernet optical interface module	18 × QSFP28 ports
LSXM1CGQ8C1	8-port 100GBASE Ethernet optical interface module	8 × QSFP28 ports
LSXM1TGS24C1	24-port 10GBASE Ethernet optical interface module	24 × SFP+ ports

LSXM1CGQ18C1

View

Figure2-51 LSXM1CGQ18C1 view

Technical specifications

Table2-53 Technical specifications

Item	Specification
Port	18 × QSFP28 ports
Dimensions (H × W × D)	44.0 × 191.0 × 271.0 mm (1.73 × 7.52 × 10.67 in)
Weight	1.78 kg (3.92 lb)
Power consumption (static)	90 W
Power consumption (typical)	101 W
Power consumption (at full load)	169 W
Operating temperature	0°C to 40°C (32°F to 104°F)
Operating relative humidity	5% RH to 95% RH, noncondensing

Ports and LEDs

Figure2-52 LSXM1CGQ18C1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-54 LED descriptions

LED	LED status	Description
QSFP+ port LED	Flashing	The QSFP+ port is sending or receiving data.
	On	A link is present on the QSFP+ port.
	Off	No link is present on the QSFP+ port.

LSXM1CGQ8C1

View

Figure2-53 LSXM1CGQ8C1 view

Technical specifications

Table2-55 Technical specifications

Item	Specification
Port	8 × QSFP28 ports
Dimensions (H × W × D)	44.0 × 191.0 × 271.0 mm (1.73 × 7.52 × 10.67 in)
Weight	1.50 kg (3.31 lb)
Power consumption (static)	38 W
Power consumption (typical)	49 W
Power consumption (at full load)	79 W
Operating temperature	0°C to 40°C (32°F to 104°F)
Operating relative humidity	5% RH to 95% RH, noncondensing

Ports and LEDs

Figure2-54 LSXM1CGQ8C1 front panel

(1) 100G QSFP28 fiber port	(2) 100G QSFP28 fiber port LED

Table2-56 LED description

LED	LED status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data.
	On	A link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

LSXM1TGS24C1

View

Figure2-55 LSXM1TGS24C1 view

Technical specifications

Table2-57 Technical specifications

Item	Specification
Port	24 × SFP+ ports
Dimensions (H × W × D)	44.0 × 191.0 × 271.0 mm (1.73 × 7.52 × 10.67 in)
Weight	1.53 kg (3.37 lb)
Power consumption (static)	33 W
Power consumption (typical)	35 W
Power consumption (at full load)	63 W
Operating temperature	0°C to 40°C (32°F to 104°F)
Operating relative humidity	5% RH to 95% RH, noncondensing

Ports and LEDs

Figure2-56 LSXM1TGS24C1 front panel

(1) 10G SFP+ fiber port	(2) 10G SFP+ fiber port LED

Table2-58 LED description

LED	LED status	Description
SFP+ port LED	Flashing	The SFP+ port is sending or receiving data.
	On	A link is present on the SFP+ port.
	Off	No link is present on the SFP+ port.

Type K fabric modules

LSXM1SFK16ER1

View

Figure2-57 LSXM1SFK16ER1 view

Technical specifications

Table2-59 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	159 W to 293 W
Compatible device models	S12516R
Applicable interface modules	Type K interface modules

Buttons and LEDs

Figure2-58 LSXM1SFK16ER1 front panel

(1) RUN/ALM LED

Table2-60 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFK16GR1

View

Figure2-59 LSXM1SFK16GR1 view

Technical specifications

Table2-61 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	471 W to 822 W
Compatible device models	S12516R
Applicable interface modules	Type K interface modules

Buttons and LEDs

Figure2-60 LSXM1SFK16GR1 front panel

(1) RUN/ALM LED

Table2-62 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFK08ER1

View

Figure2-61 LSXM1SFK08ER1 view

Technical specifications

Table2-63 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	90 W to 157 W
Compatible device models	S12508R
Applicable interface modules	Type K interface modules

Buttons and LEDs

Figure2-62 LSXM1SFK08ER1 front panel

(1) RUN/ALM LED

Table2-64 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFK08GR1

View

Figure2-63 LSXM1SFK08GR1 view

Technical specifications

Table2-65 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	350 W to 450 W
Compatible device models	S12508R
Applicable interface modules	Type K interface modules

Buttons and LEDs

Figure2-64 LSXM1SFK08GR1 front panel

(1) RUN/ALM LED

Table2-66 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFK04FR1

View

Figure2-65 LSXM1SFK04FR1 view

Technical specifications

Table2-67 Technical specifications

Item	Specification
Processor	Intel processor (quad-core) @ 2.2 GHz
SDRAM	8 GB DDR4 SDRAM
Power consumption	104 W to 212 W
Compatible device models	S12504R
Applicable interface modules	Type K interface modules
Hot swapping	Supported

Buttons and LEDs

Figure2-66 LSXM1SFK04FR1 front panel

(1) RUN/ALM LED

Table2-68 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

Type H fabric modules

LSXM2SFH16CR1

Technical specifications

Table2-69 Technical specifications

Item	Specification
Processor	MIPS64 (dual-core) @ 1GHz
SDRAM	4 GB DDR3 SDRAM
Power consumption	194 W to 308 W
Compatible device models	S12516R
Applicable interface modules	Type H interface modules
Hot swapping	Supported

Buttons and LEDs

Figure2-67 LSXM2SFH16CR1 front panel

(1) RUN/ALM LED

Table2-70 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFH16ER1

View

Figure2-68 LSXM1SFH16ER1 view

Technical specifications

Table2-71 Modules functionalities

Item	Specification
Processor	MIPS64 (dual-core) @ 1GHz
SDRAM	4 GB DDR3 SDRAM
Power consumption	487 W to 816 W
Compatible device models	S12516R
Applicable interface modules	Type H interface modules
Hot swapping	Supported

Buttons and LEDs

Figure2-69 LSXM1SFH16ER1 front panel

(1) RUN/ALM LED

Table2-72 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFH08CR1

View

Figure2-70 LSXM1SFH08CR1 view

Technical specifications

Table2-73 Technical specifications

Item	Specification
Processor	MIPS64 (dual-core) @ 1 GHz
SDRAM	4 GB DDR3 SDRAM
Power consumption	84 W to 135 W
Compatible device models	S12508R
Applicable interface modules	Type H interface modules
Hot swapping	Supported

Buttons and LEDs

Figure2-71 LSXM1SFH08CR1 front panel

(1) RUN/ALM LED

Table2-74 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFH08DR1

View

Figure2-72 LSXM1SFH08DR1 view

Technical specifications

Table2-75 Modules functionalities

Item	Specification
Processor	MIPS64 (dual-core) @ 1GHz
SDRAM	4 GB DDR3 SDRAM
Power consumption	159 W to 255 W
Compatible device models	S12508R
Applicable interface modules	Type H interface modules
Hot swapping	Supported

Buttons and LEDs

Figure2-73 LSXM1SFH08DR1 front panel

(1) RUN/ALM LED

Table2-76 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

LSXM1SFH04DR1

View

Figure2-74 LSXM1SFH04DR1 view

Technical specifications

Table2-77 Modules functionalities

Item	Specification
Processor	MIPS64 (dual-core) @ 1 GHz
SDRAM	4 GB DDR3 SDRAM
Power consumption	86 W to 140 W
Compatible device models	S12504R
Applicable interface modules	Type H interface modules
Hot swapping	Supported

Buttons and LEDs

Figure2-75 LSXM1SFH04DR1 front panel

(1) RUN/ALM LED

Table2-78 LED description

LED	LED status	Description
RUN/ALM LED	Green	The fabric module is operating correctly.
	Red	The fabric module has failed or is loading software.
	Off	The fabric module is not powered on or has not started loading software.

Fabric module filler panels

The device comes with fabric module slots empty. To ensure adequate dissipation, purchase and install fabric module filler panels in empty fabric module slots.

Table2-79 Fabric module filler panels

Fabric module filler panel	Quantity per chassis
S12516R fabric module filler panel	0 to 4
S12508R fabric module filler panel
S12504R fabric module filler panel

Slide rails

LSXM1BSR

View

Figure2-76 LSXM1BSR view

(1) Bottom-support rail installation hole	(2) Sign
(3) Chassis rail	(4) Front plate installation hole
(5) Locating tab

Technical specifications

No slide rails are provided with the device. Purchase slide rails yourself as needed. Table2-80 shows the weights of the compatible chassis when they are fully configured and the slide rail technical specifications.

Table2-80 Technical specifications

Model

Max chassis weight

(fully configured)

Applicable slide rail

Adjustment range

Occupied rack space

S12516R

400 kg (881.83 lb)

LSXM1BSR

630 mm to 900 mm

(24.80 in to 35.43)

1 RU

S12508R

220 kg (485.01 lb)

LSTM2KSGD0

View

Figure2-77 LSTM2KSGD0 view

(1) Chassis rail	(2) Installation sign	(3) Installation hole

Technical specifications

No slide rails are provided with the device. Purchase slide rails yourself as needed. Table2-81 shows the weights of the compatible chassis when they are fully configured and the slide rail technical specifications.

Table2-81 Technical specifications

Model

Max chassis weight

(fully configured)

Applicable slide rail

Adjustment range

Occupied rack space

S12508R

220 kg (485.01 lb)

LSTM2KSGD0

500 mm to 800 mm

(19.69 in to 31.50 in)

2 RUs

LSVM1BSR10

View

Figure2-78 LSVM1BSR10 view

(1) Sign	(2) Chassis rail	(3) Air vent	(4) Installation hole

Technical specifications

No slide rails are provided with the device. Purchase slide rails yourself as needed. Table2-82 shows the weights of the compatible chassis when they are fully configured and the slide rail technical specifications.

Table2-82 Technical specifications

Model

Max chassis weight

(fully configured)

Applicable slide rail

Adjustment range

Occupied rack space

S12504R

S12500R-2XL

120 kg (264.55 lb)

LSVM1BSR10

630 mm to 850 mm

(24.80 in to 33.46 in)

N/A

S12500R-2L

70 kg (154.32 lb)

3 Power supplies

CAUTION:

Do not install power supplies of different models on the same device.

The device supports N+N (dual power inputs) or N+1 (single power input) power supply redundancy. Determine the number of power supplies based on the power supply mode and system power consumption. Make sure the total maximum output power of the installed power supplies is greater than the system power consumption. As a best practice, reserve 20% of the maximum output power. Table3-1 shows the power supplies available for the device.

When the temperature of a power supply exceeds the upper limit or drops below the lower limit, the power supply shuts down automatically. When the temperature restores into the normal range, the power supply starts up automatically.

Table3-1 Power supplies available for the device

Device model

Available power supplies

S12516R

S12508R

S12504R

S12500R-2XL

· PSR2400-54A

· PSR2400-54D

· PSR3000-54A

· PSR3000-54AHD

· PSR2400-54AA-B

S12500R-2L

· PSR1800-56A

· PSR1800-56D

PSR2400-54A

View

Figure3-1 PSR2400-54A power supply view

Technical specifications

Table3-2 Technical specifications

Item	Specification
Net weight	1.9 kg (4.19 lb)
Dimensions (H × W × D)	41 × 100 × 332 mm (1.61 × 3.94 × 13.07 in)
Rated input voltage range	100 VAC to 240 VAC @ 50 Hz or 60 Hz
Rated output voltage	54 VDC
Max input current	16 A
Maximum output current	44.5 A
Max output power	1200 W @ 110 VAC 2400 W @ 220 VAC
Heat dissipation	Equipped with fans, rear-to-front airflow
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2XL

LEDs

Figure3-2 PSR2400-54A front panel

(1) Input status LED (AC OK)	(2) Output status LED (DC OK)

Table3-3 LED description

LED	Mark	Status	Description
Input status LED	AC OK	Off	No power input.
		Off	The input voltage is too low and the power supply has entered self-protection state.
		Green	Normal power input.
Output status LED	DC OK	Green	Normal power output.
		Red	Power output of the power supply system is abnormal. The power supply has an output short circuit, output overcurrent, output overvoltage, input undervoltage, or remote shutdown alarm and has entered self-protection state.
		Orange	An overtemperature alarm occurred on the power supply.

PSR2400-54D

View

Figure3-3 PSR2400-54D power supply view

Technical specifications

Table3-4 Technical specifications

Item	Specification
Net weight	1.9 kg (4.19 lb)
Dimensions (H × W × D)	41 × 100 × 332 mm (1.61 × 3.94 × 13.07 in)
Rated input voltage range	–48 to –60 VDC
Rated output voltage	54 VDC
Max input current	80 A
Maximum output current	44.5 A
Max output power	2400 W
Heat dissipation	Equipped with fans, rear-to-front airflow.
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2XL

LEDs

Figure3-4 PSR2400-54D front panel

(1) Input status LED (INPUT OK)	(2) Output status LED (OUTPUT OK)

Table3-5 LED description

LED	Mark	Status	Description
Input status LED	INPUT OK	Off	No power input.
		Off	The input voltage is too low and the power supply has entered self-protection state.
		Green	Normal power input.
Output status LED	OUTPUT OK	Green	Normal power output.
		Red	Power output of the power supply system is abnormal. The power supply has an output short circuit, output overcurrent, output overvoltage, input undervoltage, or remote shutdown alarm and has entered self-protection state.
		Orange	An overtemperature alarm occurred on the power supply

PSR3000-54A

View

Figure3-5 PSR3000-54A power supply view

Technical specifications

Table3-6 Technical specifications

Item	Specification
Net weight	2.1 kg (4.63 lb)
Dimensions (H × W × D)	41 × 100 × 332 mm (1.61 × 3.94 × 13.07 in)
Rated input voltage range	AC input: 100 VAC to 240 VAC @ 50 Hz or 60 Hz HVDC input: 240 VDC
Rated output voltage	54 VDC
Max input current	16 A
Maximum output current	55.6 A
Max output power	1200 W @ 110 VAC 2400 W @ 175 VAC to 200 VAC 3000 W @ 220 VAC 3000 W @ 240 VDC
Heat dissipation	Equipped with fans, rear-to-front airflow
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2XL

LEDs

Figure3-6 PSR3000-54A front panel

(1) Input status LED (AC OK)	(2) Output status LED (DC OK)

Table3-7 LED description

LED	Mark	Status	Description
Input status LED	AC OK	Off	No power input.
		Off	The input voltage is too low and the power supply has entered self-protection state.
		Green	Normal power input.
Output status LED	DC OK	Green	Normal power output.
		Red	Power output of the power supply system is abnormal. The power supply has an output short circuit, output overcurrent, output overvoltage, input undervoltage, or remote shutdown alarm and has entered self-protection state.
		Orange	An overtemperature alarm occurred on the power supply.

PSR3000-54AHD

View

Figure3-7 PSR3000-54AHD power supply view

Technical specifications

Table3-8 Technical specifications

Item	Specification
Net weight	2.1 kg (4.63 lb)
Dimensions (H × W × D)	41 × 100 × 332 mm (1.61 × 3.94 × 13.07 in)
Rated input voltage range	100 VAC to 240 VAC @ 50 Hz or 60 Hz
Rated output voltage	54 VDC
Max input current	16 A
Maximum output current	44.5 A
Max output power	1200 W @ 110 VAC 2400 W @ 220 VAC
Heat dissipation	Equipped with fans, rear-to-front airflow
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2XL

LEDs

Figure3-8 PSR3000-54AHD front panel

(1) Input status LED (IN OK)	(2) Output status LED (OUT OK)

Table3-9 LED description

LED	Mark	Status	Status
Input status LED	IN OK	Off	No power input.
		Off	The input voltage is too low and the power supply has entered self-protection state.
		Green	Normal power input.
Output status LED	OUT OK	Green	Normal power output.
		Orange	An overtemperature alarm occurred on the power supply.
		Red	Power output of the power supply system is abnormal. The power supply has an output overcurrent, output overvoltage, input undervoltage, or remote shutdown alarm and has entered self-protection state.

PSR2400-54AA-B

View

Figure3-9 PSR2400-54AA-B power supply view

Technical specifications

Table3-10 Technical specifications

Item	Specification
Net weight	1.95 kg (4.30 lb)
Dimensions (H × W × D)	41 × 100 × 332 mm (1.61 × 3.94 × 13.07 in)
Rated input voltage range	100 VAC to 240 VAC @ 50 Hz or 60 Hz
Rated output voltage	54 VDC
Max input current	16 A
Maximum output current	44.5 A
Max output power	1200 W @ 110 VAC 2400 W @ 220 VAC
Heat dissipation	Equipped with fans, rear-to-front airflow
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	· S12516R · S12508R · S12504R · S12500R-2XL

LEDs

Figure3-10 PSR2400-54AA-B front panel

Table3-11 LED description

LED	Mark	Status	Description
Input1 status LED	IN1	Off	No power input.
		Green	Normal power input.
		Red	The input voltage is too low.
Input2 status LED	IN2	Off	No power input.
		Green	Normal power input.
		Red	The input voltage is too low.
Output status LED	OUT	Off	No power output.
		Green	Normal power output.
		Red	Power output of the power supply system is abnormal. The power supply has an output short circuit, output overcurrent, output overvoltage, input undervoltage, or remote shutdown alarm and has entered self-protection state.
		Orange	An overtemperature alarm occurred on the power supply.

PSR1800-56A

View

Figure3-11 PSR1800-56A power supply view

Technical specifications

Table3-12 Technical specifications

Item	Specification
Net weight	1.6 kg (3.53 lb)
Dimensions (H × W × D)	40.1 × 82.6 × 297.7 mm (1.58 × 3.25 × 11.72 in)
Rated input voltage range	100 VAC to 240 VAC @ 50 Hz or 60 Hz
Rated output voltage	240 VDC
Max input current	13 A @ 110 VAC 9 A @ 220 VAC
Maximum output current	32.2 A (201 V to 240 V input voltage) 19.6 A @ 100 V to 200 V 32.2 A @ 240 VDC
Max output power	1800 W @ 201 V to 240 V 1100 W @ 100 V to 200 V 1800 W @ 240 VDC
Heat dissipation	Equipped with fans, rear-to-front airflow
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	S12500R-2L

LEDs

Figure3-12 PSR1800-56A front panel

(1) Input status LED (AC OK)	(2) AC-input power receptacle
(3) Latch
(4) Power supply handle (The handle is in red, indicating the air ventilation is performed by exhausting air from the inside to the outside.)
(5) Output status LED (DC OK)

Table3-13 LED description

LED	Mark	Status	Description
Input status LED	AC OK	Steady green	Normal power input.
Input status LED	AC OK	Off	· No power input. · Abnormal power input.
Output status LED	DC OK	Steady green	Normal power output.
		Steady red	Abnormal power output.
		Off	No power output.

PSR1800-56D

View

Figure3-13 PSR1800-56D power supply view

Technical specifications

Table3-14 Technical specifications

Item	Specification
Net weight	2.0 kg (4.41 lb)
Dimensions (H × W × D)	40.1 × 82.6 × 297.7 mm (1.58 × 3.25 × 11.72 in)
Rated input voltage range	–48 VDC to –60 VDC
Rated output voltage	56 VDC
Max input current	45 A
Maximum output current	32.2 A
Max output power	1800 W
Heat dissipation	Equipped with fans, rear-to-front airflow
Hot swapping	Supported
Operating temperature	–10°C to +55°C (14°F to 131°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Compatible device models	S12500R-2L

LEDs

Figure3-14 PSR1800-56D front panel

(1) Input status LED (IN OK)	(2) Output status LED (OUT OK)

Table3-15 LED description

LED	Mark	Status	Description
Input status LED	IN OK	Steady green	Normal power input.
Input status LED	IN OK	Off	· No power input. · Abnormal power input.
Output status LED	OUT OK	Steady green	Normal power output.
		Steady red	Abnormal power output.
		Off	No power output.

4 Fan trays

For S12516G-AF and S12508G-AF, the fabric module status LEDs on the fan tray correspond to the fabric modules that the fan tray covers from left to right, as shown in Figure4-1 and Figure4-2.

Figure4-1 Corresponding relations between the LEDs on the S12508G-AF fan trays and fabric module slots

(1) LEDs for fabric module slots 10 to 12	(2) LEDs for fabric module slots 13 to 15

Figure4-2 Corresponding relations between the LEDs on the S12504G-AF fan trays and fabric module slots

(1) LEDs for fabric module slot 6	(2) LEDs for fabric module slot 8
(3) Fabric module slot number	(4) LEDs for fabric module slot 9
(5) LEDs for fabric module slot 11

LSXM116XFANH (high performance)

View

Figure4-3 LSXM116XFANH (high performance) fan tray view

Technical specifications

Table4-2 Technical specifications

Item	Specification
Net weight	8.4 kg (18.52 lb)
Dimensions (H × W × D)	144 × 927 × 154 mm (5.67 × 36.50 × 6.06 in)
Power consumption	· Minimum: 59 W · Typical: 725 W · Maximum: 2030 W
Fan number	6
Fan diameter	134 mm (5.28 in)
Maximum air flow rate	1860 CFM (52.67 m3/min)
Airflow direction	Air drawn in from the faceplate
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	Supported
Compatible device models	S12516R

LEDs

Figure4-4 Front panel

(1) Fan tray status LED (FAN)	(2) Fabric module status LED (SWITCHING FABRIC)

Table4-3 Fan tray LED description

OK	FAIL	Description
On	Off	The fan tray is operating correctly.
Off	On	The fan tray is faulty.
Off	Off	The fan tray is not powered on.

Table4-4 Description for fabric module status LEDs on the fan tray

RUN	ALM	Description
Flashing (once per second)	Off	The fabric module is operating correctly.
Off	On	The fabric module is faulty.
Flashing (once per second)	On	· The fabric module is loading software. · The fabric module is operating incorrectly. For example, the operating temperature exceeds the acceptable range.
Off	Off	The fabric module has not started or is not powered on.
On	On	The fabric module is starting up.

LSXM116XFAN

View

Figure4-5 LSXM116XFAN fan tray view

Technical specifications

Table4-5 Technical specifications

Item	Specification
Net weight	6.7 kg (14.77 lb)
Dimensions (H × W × D)	144 × 927 × 154 mm (5.67 × 36.50 × 6.06 in)
Power consumption	· Minimum: 33 W · Typical: 206 W · Maximum: 793 W
Fan number	6
Fan diameter	120 mm (4.72 in)
Maximum air flow rate	1020 CFM (28.88 m3/min)
Airflow direction	Air drawn in from the faceplate
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	Supported
Compatible device models	S12516R

LEDs

Figure4-6 Front panel

(1) Fan tray status LED (FAN)	(2) Fabric module status LED (SWITCHING FABRIC)

Table4-6 Fan tray LED description

OK	FAIL	Description
On	Off	The fan tray is operating correctly.
Off	On	The fan tray is faulty.
Off	Off	The fan tray is not powered on.

Table4-7 Description for fabric module status LEDs on the fan tray

RUN	ALM	Description
Flashing (once per second)	Off	The fabric module is operating correctly.
Off	On	The fabric module is faulty.
Flashing (once per second)	On	· The fabric module is loading software. · The fabric module is operating incorrectly. For example, the operating temperature exceeds the acceptable range.
Off	Off	The fabric module has not started or is not powered on.
On	On	The fabric module is starting up.

LSXM108XFANH (high performance)

View

Figure4-7 LSXM108XFANH (high performance) fan tray view

Technical specifications

Table4-8 Technical specifications

Item	Specification
Net weight	4.4 kg (9.70 lb)
Dimensions (H × W × D)	144 × 527 × 154 mm (5.67 × 20.75 × 6.06 in)
Power consumption	· Minimum: 35 W · Typical: 410 W · Maximum: 1000 W
Fan number	3
Fan diameter	134 mm (5.28 in)
Maximum air flow rate	930 CFM (26.33 m3/min)
Airflow direction	Air drawn in from the faceplate
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	Supported
Compatible device models	S12508R

LEDs

Figure4-8 Front panel

(1) Fan tray status LED (FAN)	(2) Fabric module status LED (SWITCHING FABRIC)

Table4-9 Fan tray LED description

OK	FAIL	Description
On	Off	The fan tray is operating correctly.
Off	On	The fan tray is faulty.
Off	Off	The fan tray is not powered on.

Table4-10 Description for fabric module status LEDs on the fan tray

RUN	ALM	Description
Flashing (once per second)	Off	The fabric module is operating correctly.
Off	On	The fabric module is faulty.
Flashing (once per second)	On	· The fabric module is loading software. · The fabric module is operating incorrectly. For example, the operating temperature exceeds the acceptable range.
Off	Off	The fabric module has not started or is not powered on.
On	On	The fabric module is starting up.

LSXM108XFAN

View

Figure4-9 LSXM108XFAN fan tray view

Technical specifications

Table4-11 Technical specifications

Item	Specification
Net weight	3.8 kg (8.38 lb)
Dimensions (H × W × D)	144 × 527 × 154 mm (5.67 × 20.75 × 6.06 in)
Power consumption	· Minimum: 17 W · Typical: 103 W · Maximum: 395 W
Fan number	3
Fan diameter	120 mm (4.72 in)
Maximum air flow rate	510 CFM (14.44 m3/min)
Airflow direction	Air drawn in from the faceplate
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	Supported
Compatible device models	S12508R

LEDs

Figure4-10 Front panel

(1) Fan tray status LED (FAN)	(2) Fabric module status LED (SWITCHING FABRIC)

Table4-12 Fan tray LED description

OK	FAIL	Description
On	Off	The fan tray is operating correctly.
Off	On	The fan tray is faulty.
Off	Off	The fan tray is not powered on.

Table4-13 Description for fabric module status LEDs on the fan tray

RUN	ALM	Description
Flashing (once per second)	Off	The fabric module is operating correctly.
Off	On	The fabric module is faulty.
Flashing (once per second)	On	· The fabric module is loading software. · The fabric module is operating incorrectly. For example, the operating temperature exceeds the acceptable range.
Off	Off	The fabric module has not started or is not powered on.
On	On	The fabric module is starting up.

LSXM104XFANH (high performance)

View

Figure4-11 LSXM104XFANH (high performance) fan tray view

Technical specifications

Table4-14 Technical specifications

Item	Specification
Net weight	3.0 kg (6.61 lb)
Dimensions (H × W × D)	144 × 263 × 102 mm (5.67 × 10.35 × 4.02 in)
Power consumption	· Minimum: 19.4 W · Typical: 86.4 W · Maximum: 590 W
Fan number	2
Fan diameter	120 mm (4.72 in)
Maximum air flow rate	560 CFM (15.86 m3/min)
Airflow direction	Air drawn in from the faceplate
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	Supported
Compatible device models	S12504R

LEDs

Figure4-12 Front panel

(1) Fan tray status LED (FAN)	(2) Fabric module status LED (SWITCHING FABRIC)

Table4-15 Fan tray LED description

OK	FAIL	Description
On	Off	The fan tray is operating correctly.
Off	On	The fan tray is faulty.
Off	Off	The fan tray is not powered on.

Table4-16 Description for fabric module status LEDs on the fan tray

RUN	ALM	Description
Flashing (once per second)	Off	The fabric module is operating correctly.
Off	On	The fabric module is faulty.
Flashing (once per second)	On	· The fabric module is loading software. · The fabric module is operating incorrectly. For example, the operating temperature exceeds the acceptable range.
Off	Off	The fabric module has not started or is not powered on.
On	On	The fabric module is starting up.

LSXM104XFAN

View

Figure4-13 LSXM104XFAN fan tray view

Technical specifications

Table4-17 Technical specifications

Item	Specification
Net weight	1.8 kg (3.97 lb)
Dimensions (H × W × D)	144 × 263 × 67 mm (5.67 × 10.35 × 2.64 in)
Power consumption	· Minimum: 14 W · Typical: 66 W · Maximum: 255 W
Fan number	2
Fan diameter	120 mm (4.72 in)
Maximum air flow rate	340 CFM (9.63 m3/min)
Airflow direction	Air drawn in from the faceplate
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	Supported
Compatible device models	S12504R

LEDs

Figure4-14 Front panel

(1) Fan tray status LED (FAN)	(2) Fabric module status LED (SWITCHING FABRIC)

Table4-18 Fan tray LED description

OK	FAIL	Description
On	Off	The fan tray is operating correctly.
Off	On	The fan tray is faulty.
Off	Off	The fan tray is not powered on.

Table4-19 Description for fabric module status LEDs on the fan tray

RUN	ALM	Description
Flashing (once per second)	Off	The fabric module is operating correctly.
Off	On	The fabric module is faulty.
Flashing (once per second)	On	· The fabric module is loading software. · The fabric module is operating incorrectly. For example, the operating temperature exceeds the acceptable range.
Off	Off	The fabric module has not started or is not powered on.
On	On	The fabric module is starting up.

FAN-120-1-A

View

Figure4-15 FAN-120-1-A fan tray view

Technical specifications

Table4-20 Technical specifications

Item	Specification
Net weight	1.61 kg (3.55 lb)
Dimensions (H × W × D)	123 × 214 × 123 mm (4.84 × 8.43 ×4.84 in)
Power consumption	· Minimum: 17 W · Typical: 31 W · Maximum: 269 W
Fan number	2
Fan diameter	280 CFM (7.93 m3/min)
Maximum air flow rate	Air exhausted from the fan tray faceplate
Airflow direction	Supported
Noise reduction after poweron	Supported
Auto speed adjustment	Supported
Alarm detection	Supported
Electronic label	Supported
Hot swapping	S12500R-2L

LEDs

Figure4-16 Front panel

(1) Fan tray status LED (RUN/ALM)

Table4-21 Fan tray LED description

Status	Description
Steady green	The fan tray is operating correctly.
Steady red	The fan tray is faulty.
Off	The fan tray is not powered on.

5 Cables

The device supports varies interface modules that provide different types of ports. The cable used varies by port type. For more information, see Table5-1.

Table5-1 Cable description

Cable	Port type	Function
DC power cord	DC power receptacle	Connects a DC power supply to the external DC power supply system
AC power cord	AC power receptacle	Connects an AC power supply to the external AC power supply system
Console cable	· RJ-45 port at one end and DB-9 port at the other end · RJ-45 port at one end and USB port at the other end	Connects the console port of the device to the console terminal
Ethernet twisted pair cable	RJ-45 Ethernet ports	Connects RJ-45 Ethernet ports to transmit data
Optical fiber	SFP/SFP+/SFP28/QSFP+/QSFP28 ports	Connects the fiber ports to transmit data
SFP+/SFP28 copper cable	SFP+/SFP28 ports	Connects SFP+/SFP28 ports to transmit data
SFP+ AOC/SFP28 AOC cable	SFP+/SFP28 ports	Connects SFP+/SFP28 ports to transmit data
QSFP+ copper cable	QSFP+ ports	Connects QSFP+ ports to transmit data
QSFP28 copper cable	QSFP28 ports	Connects QSFP28 ports to transmit data
QSFP+ AOC/QSFP28 AOC cable	QSFP+/QSFP28 ports	Connects QSFP+/QSFP28 ports to transmit data
QSFP-DD copper cable	QSFP-DD ports	Connects QSFP-DD ports to transmit data
QSFP+ to SFP+/QSFP28 to SFP28 copper cable	QSFP+ port at one end and SFP+ port at the other end	Connects QSFP+ port at one end and SFP+ port at the other end
QSFP+ to SFP+/QSFP28 to SFP28 copper cable	QSFP28 port at one end and SFP28 port at the other end	Connects QSFP28 port at one end and SFP28 port at the other end

DC power cord

DC power cords are used for connecting the DC power supplies of the device to the external DC power supply system. Table5-2 shows the DC power cords supported by the device.

Table5-2 DC power cords supported by the device

Compatible power supply	Cable length	Description
PSR2400-54D	3 m (9.84 ft)	Connects the DC power supply to an external DC power supply system.
PSR2400-54D	15 m (49.21 ft)
PSR3000-54AHD	3 m (9.84 ft)	Connects the 3000W AC & 240V to 380V HVDC power supply to an external DC power supply system.
PSR1800-56D	3 m (9.84 ft)	Connects the DC power supply to an external DC power source.
PSR1800-56D	15 m (49.21 ft)

AC power cord

AC power cords are used for connecting the AC power supplies of the device to the external AC power supply system.

To select an AC power cord for an AC power supply, consider the following items:

· Power capacity of the power supply.

· Current-carrying capacity of the power cord.

· Region-and country-specific plug type.

AC power supplies of the device require 16A AC power cords. For power plugs required by different countries or regions, see H3C Power Cords & Cables User Guide.

Console cable

As shown in Table5-3, two types of serial console cables can be used for connecting the device to a configuration terminal. The device is not provided with a serial console cable.

Table5-3 Connection methods and console cables

Connection method	Console cable type	Configuration terminal-side connector	Device-side connector
Using the serial console port for connection	DB9-to-RJ45 console cable	DB-9 female connector	RJ-45 connector
Using the serial console port for connection	USB-to-RJ45 console cable	USB connector	RJ-45 connector

The signal pinout for the RJ-45 connector of a serial console cable varies by vendor. To avoid abnormal configuration terminal display, use a serial console cable provided by H3C. For more information, see Table5-4. To prepare a serial console cable yourself, make sure the signal pinout for the RJ-45 connector is the same as that shown in Table5-5.

Table5-4 Console cable views

Console cable type	Console cable view	Product code for the recommended H3C console cable
DB9-to-RJ45 console cable		04042967
USB-to-RJ45 console cable		0404A1EE

Connecting a DB9-to-RJ45 console cable

CAUTION:

Follow these guidelines when you connect a DB9-to-RJ45 console cable:

· Identify the mark on the console port and make sure you are connecting to the correct port.

· The serial ports on PCs do not support hot swapping. To connect a PC to an operating device, first connect the PC end. To disconnect a PC from an operating device, first disconnect the device end.

A DB9-to-RJ45 console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for connecting to the console port of the device, and a DB-9 female connector at the other end for connecting to the serial port on the console terminal.

Figure5-1 Console cable

Table5-5 DB9-to-RJ45 console cable signal pinout

RJ-45	Signal	DB-9	Signal
1	RTS	8	CTS
2	DTR	6	DSR
3	TXD	2	RXD
4	SG	5	SG
5	SG	5	SG
6	RXD	3	TXD
7	DSR	4	DTR
8	CTS	7	RTS

To connect the device to a configuration terminal (for example, a PC) by using a DB9-to-RJ45 console cable:

1. Plug the DB-9 female connector of the DB9-to-RJ45 console cable to the serial port on the PC.

2. Connect the RJ-45 connector to the console port on the device.

Connecting a USB-to-RJ45 console cable

IMPORTANT:

· To use a USB-to-RJ45 console cable to connect the device to a configuration terminal, first download and install the USB-to-RJ45 console driver on the configuration terminal, and then connect the USB-to-RJ45 console cable to the configuration terminal.

· If you have connected a USB-to-RJ45 console cable to the configuration terminal before driver installation, reconnect the USB-to-RJ45 console cable to the configuration terminal.

For information about the signal pinout for the RJ-45 connector of a USB-to-RJ45 console cable, see Table5-5.

The following installs the driver on the Windows system. To install the driver on other operating systems, see the installation guide in the driver compression package named by using the corresponding operating system.

To connect the device to a configuration terminal by using a USB-to-RJ45 console cable:

1. Click the following link, or copy it to the address bar on your browser and download the USB-to-RJ45 console driver.

http://www.h3c.com/en/home/USB_to_RJ45_Console/

2. View the TXT file Read me in the Windows folder to identify whether the Windows system of the configuration terminal supports the driver.

3. If the Windows system supports the driver, install PL23XX-M_LogoDriver_Setup_v200_20190815.exe.

4. Click Next on the welcome page of the driver installation wizard.

Figure5-2 Driver installation wizard

5. Click Finish after the drive installation is completed.

Figure5-3 Finishing the driver installation

6. Connect the standard USB connector of the cable to the USB port of the configuration terminal.

7. Connect the RJ-45 connector of the cable to the console port of the device.

Ethernet twisted pair cable

Introduction

An Ethernet twisted pair cable consists of four pairs of insulated copper wires twisted together. Every wire uses a different color, and has a diameter of about 1 mm (0.04 in).

Application scenarios

An Ethernet twisted pair cable typically transmits analog signals and is advantageous in transmitting data over shorter distances. It is the commonly used transmission media of the Ethernet.

Maximum transmission distance

The maximum transmission distance of the Ethernet twisted pair cable is 100 m (328.08 ft). To extend the transmission distance, you can connect two twisted pair cable segments with a repeater. At most four repeaters can be added, which means five segments can be joined together to provide a transmission distance of 500 m (1640.42 ft).

RJ-45 connector

An Ethernet twisted pair cable connects network devices through the RJ-45 connectors at the two ends. Figure5-4 shows the pinouts of an RJ-45 connector.

Figure5-4 RJ-45 connector pinout diagram

Cable pinouts

EIA/TIA cabling specifications define two standards: 568A and 568B, for cable pinouts.

· Standard 568A—pin 1: white/green stripe, pin 2: green solid, pin 3: white/orange stripe, pin 4: blue solid, pin 5: white/blue stripe, pin 6: orange solid, pin 7: white/brown stripe, pin 8: brown solid.

· Standard 568B—pin 1: white/orange stripe, pin 2: orange solid, pin 3: white/green stripe, pin 4: blue solid, pin 5: white/blue stripe, pin 6: green solid, pin 7: white/brown stripe, pin 8: brown solid.

Cable type

Based on performance

Ethernet twisted pair cables can be classified into category 3, category 4, category 5, category 5e, category 6, category 6A, and category 7 cables based on performance. In LANs, category 5, category 5e, and category 6 are commonly used.

Table5-6 Description for commonly used Ethernet twisted pair cables

Cable type	Description
Category 5	Suitable for data transmission at a maximum speed of 100 Mbps, with a bandwidth of 100 MHz.
Category 5e	Suitable for data transmission at a maximum speed of 1000 Mbps, with a bandwidth of 100 MHz.
Category 6	Suitable for data transmission at a maximum speed of 1 Gbps, with a bandwidth of 250 MHz.
Category 6A	Suitable for data transmission at a maximum speed of 10 Gbps, with a bandwidth of 500 MHz.
Category 7	Suitable for data transmission at a maximum speed of 10 Gbps, with a bandwidth of 600 MHz.

Based on pinouts

Ethernet twisted pair cables can be classified into straight-through and crossover cables based on their pinouts.

· Straight-through—The pinouts at both ends comply with standard 568B, as shown in Figure5-5.

· Crossover—The pinouts at one end comply with standard 568B, and those at the other end comply with standard 568A, as shown in Figure5-6.

Figure5-5 Straight-through cable

Figure5-6 Crossover cable

Pin assignments

Select an Ethernet twisted pair cable according to the RJ-45 Ethernet port type on your device. An RJ-45 Ethernet port can be MDI (for routers and PCs) or MDIX (for the device). Table5-7 and Table5-8 show their pinouts.

Table5-7 RJ-45 MDI port pinouts

Pin	10Base-T/100Base-TX		1000Base-T
Pin	Signal	Function	Signal	Function
1	Tx+	Sends data	BIDA+	Bi-directional data cable A+
2	Tx-	Sends data	BIDA-	Bi-directional data cable A-
3	Rx+	Receives data	BIDB+	Bi-directional data cable B+
4	Reserved	N/A	BIDC+	Bi-directional data cable C+
5	Reserved	N/A	BIDC-	Bi-directional data cable C-
6	Rx-	Receives data	BIDB-	Bi-directional data cable B-
7	Reserved	N/A	BIDD+	Bi-directional data cable D+
8	Reserved	N/A	BIDD-	Bi-directional data cable D-

Table5-8 RJ-45 MDIX port pinouts

Pin	10Base-T/100Base-TX		1000Base-T
Pin	Signal	Function	Signal	Function
1	Rx+	Receives data	BIDB+	Bi-directional data cable B+
2	Rx-	Receives data	BIDB-	Bi-directional data cable B-
3	Tx+	Sends data	BIDA+	Bi-directional data cable A+
4	Reserved	N/A	BIDD+	Bi-directional data cable D+
5	Reserved	N/A	BIDD-	Bi-directional data cable D-
6	Tx-	Sends data	BIDA-	Bi-directional data cable A-
7	Reserved	N/A	BIDC+	Bi-directional data cable C+
8	Reserved	N/A	BIDC-	Bi-directional data cable C-

To ensure normal communication, the pins for sending data on one port must correspond to the pins for receiving data on the peer port. When both ports on the two devices are MDI or MDIX, use a crossover Ethernet cable. When one port is MDI and the other is MDIX, use a straight-through Ethernet cable. To summarize, straight-through and crossover cables connect the following devices:

· Straight-through cables connect devices of different types—For example, switch router to PC and switch router to router.

· Crossover cables connect devices of the same type—For example, switch router to switch router, router to router, and PC to PC.

An RJ-45 Ethernet port with MDI/MDIX autosensing enabled can automatically negotiate pin roles. The RJ-45 Ethernet ports on the device support auto-MDI/MDIX. By default, auto-MDI/MDIX is enabled on a port.

Making an Ethernet twisted pair cable

To make an Ethernet twisted pair cable:

1. Cut the cable to a required length with the crimping tool.

2. Strip off an appropriate length of the cable sheath. The length is typically that of the RJ-45 connector.

3. Untwist the pairs so that they can lie flat, and arrange the colored wires based on the wiring specifications.

4. Cut the top of the wires even with one another and insert the wires into the RJ-45 connector. Make sure the wires extend to the front of the RJ-45 connector and make good contact with the metal contacts in the RJ-45 connector and in the correct order.

5. Crimp the RJ-45 connector with the crimping tool until you hear a click.

6. Repeat the above steps with the other end of the cable.

7. Use a cable tester to verify the connectivity of the cable.

Optical fiber

CAUTION:

Use the same types of transceiver modules, pigtail cords, patch cords, and fiber cables. If you use single-mode optical fibers, the transceiver modules, pigtail cords, patch cords, and fiber cables must be single-mode.

Introduction

Optical fiber

Optical fibers are widely used in fiber-optic communications, which are advantageous for long-distance communications.

Optical fibers can be classified into the following types:

· Single-mode fiber (SMF)—It has a core size of 10 µm or smaller, and has a lower modal dispersion. It carries only a single ray of light and is mostly used for communication over longer distances.

· Multimode fiber (MMF)—It has a core size of 50 µm, 62.5 µm, or higher, and has a higher modal dispersion than the single-mode optical fiber. It is typically used for communication over shorter distances.

Table5-9 Allowed maximum tensile force and crush load

Period of force	Tensile load (N)	Crush load (N/mm)
Short period	150	500
Long term	80	100

Optical fiber cable

An optical fiber cable is a cable that contains one or more optical fibers. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube. Optical fiber cables can be classified into single-mode optical fiber cables and multimode optical fiber cables.

Patch cord

A fiber that has connectors at both ends is called a patch cord. A patch cord connects one optical device to another for signal routing. Patch cords can be classified into single-mode patch cords and multimode patch cords.

· Single-mode patch cord—The jacket is yellow. It permits transmission over longer distances.

· Multimode patch cord—The jacket is orange. It permits transmission over shorter distances.

Patch cords are classified into SC, LC, FC, and so on based on interface type. The length of a patch cord can be 0.5 m (1.64 ft), 1 m (3.28 ft), 2 m (6.56 ft), 3 m (9.84 ft), 5 m (16.40 ft), 10 m (32.81 ft) and so on.

Pigtail cord

A pigtail cord is an optical fiber that has an optical connector at one end and a length of exposed fiber at the other. The end of the pigtail is fusion spliced to a fiber, connecting the fiber cable and transceiver.

Pigtail cords can be classified into single-mode (yellow) pigtail cords and multimode (orange) pigtail cords, and can also be classified into SC, LC, FC, and so on based on interface type.

Fiber connector

Fiber connectors are indispensable passive components in an optical fiber communication system. They allow the removable connection between optical channels, which makes the optical system debugging and maintenance more convenient and the transit dispatching of the system more flexible.

Fiber connectors are indispensable passive components in an optical fiber communication system. They allow the removable connection between optical channels, which makes the optical system debugging and maintenance more convenient. There are multiple types of fiber connectors. Figure5-7 and Figure5-8 show an MPO connector and an LC connector, respectively.

Figure5-7 MPO connector

Figure5-8 LC connector

Precautions

· Make sure the fiber connector and fiber type match the transceiver module type.

· The fiber ports on the device are provided with dust plugs. To prevent particles from entering the ports, insert the dust plugs into the fiber ports that you are not to use.

· Fiber connectors must be protected under safe and reliable outer packing, and be fitted with dust caps. Fiber connectors must be installed with dust caps when they are not in use. Take care not to scratch their end face. Replace the dust cap if it is loose or polluted.

· Before you connect an optical fiber, use dust free paper and absolute alcohol to clean the end face of the fiber connector. You can brush the end faces only in one direction.

· Never bend or curve a fiber during connection. After a fiber is installed well, make sure the bend radius is not less than 40 mm or 1.57 in (the minimum dynamic bend radius is 20 D, and the minimum static bend radius is 10 D. D indicates the outer diameter of dust caps).

· If the fiber has to pass through a metallic board hole, the hole must have a sleek and fully filleted surface (the filleting radius must be not less than 2 mm or 0.08 in). When the fiber passes through a metallic board hole or bend along the acute side of mechanical parts, it must wear jackets or cushions.

· Do not use excessive force when you insert or remove a fiber connector. Never pull, press, or extrude the fiber fiercely. For the allowed maximum tensile load and crush load, see Table5-9.

SFP+/SFP28 copper cable

You can use SFP+ copper cables to connect the SFP+ ports. The SFP+ copper cables available for the device are 10G SFP+ DAC cables, as shown in Figure5-9.

You can use SFP28 copper cables to connect the SFP28 ports. The SFP28 copper cables are similar to SFP+ copper cables in appearance.

Figure5-9 SFP+ copper cable

(1) Connector	(2) Pull latch

SFP+ AOC/SFP28 AOC cable

You can use SFP+ AOC cables to connect the SFP+ ports.

You can use SFP28 AOC cables to connect the SFP28 ports. The SFP28 AOC cables are similar to SFP+ AOC cables in appearance.

Figure5-10 SFP+ AOC cable

(1) Connector	(2) Pull latch

QSFP+ copper cable

You can use QSFP+ copper cables to connect the QSFP+ ports.

Figure5-11 QSFP+ copper cable

(1) Connector	(2) Pull latch

QSFP28 copper cable

You can use QSFP28 copper cables to connect the QSFP28 ports.

Figure5-12 QSFP28 copper cable

(1) Connector	(2) Pull latch

QSFP+ AOC/QSFP28 AOC cable

You can use QSFP+ AOC cables to connect the QSFP+ ports.

You can use QSFP28 AOC cables to connect the QSFP28 ports. The QSFP28 AOC cables are similar to QSFP+ AOC cables in appearance.

Figure5-13 QSFP+ AOC cable

(1) Connector	(2) Pull latch

QSFP-DD copper cable

You can use QSFP-DD copper cables to connect the QSFP-DD ports.

Figure5-14 QSFP-DD copper cable

QSFP+ to SFP+/QSFP28 to SFP28 copper cable

A QSFP+ to SFP+ copper cable is a cable with one QSFP+ module at one end and four SFP+ modules at the other end.

A QSFP28 to SFP28 copper cable is a cable with one QSFP28 module at one end and four SFP28 modules at the other end. The QSFP28 to SFP28 copper cables are similar to QSFP+ to SFP+ copper cables in appearance.

Figure5-15 QSFP+ to SFP+ copper cable

(1) QSFP+ connector	(2) QSFP+ pull latch
(3) SFP+ connector	(4) SFP+ pull latch

6 Ordering information

To purchase an S12500R chassis or chassis components, contact the sales agent or H3C sales personnel.

Table6-1 S12500R chassis ordering information

Product code	Product name	Description
0235A2FL	S12516R	H3C S12516R Ethernet switch router chassis
0235A2FN	S12508R	H3C S12508R Ethernet switch router chassis
0235A2FM	S12504R	H3C S12504R Ethernet switch router chassis
0235A2JM	S12500R-2L	H3C S12500R-2L Ethernet switch router chassis
0235A2TG	S12500R-2XL	H3C S12500R-2XL Ethernet switch router chassis

Table6-2 S12500R chassis component ordering information

Product code	Product name	Description
SEUs
0231AE3C	LSXM1SUPER1	H3C S12500R supervisor engine unit
0231ADRF	LSXM1SUP04TR1	H3C S12504R supervisor engine unit
0231ABV3	LSXM1SUP02LR1	H3C S12500R-2L supervisor engine unit
0231AG2Q	LSXM1SUP02TR1	H3C S12500R-2L supervisor engine unit
0231AKY6	LSXM2SUP02LR1	H3C S12500R-2L supervisor engine unit
0231AH9W	LSXM1SUPEAR1	H3C S12500R AI supervisor engine unit
Fabric modules
0231AD26	LSXM2SFH16CR1	H3C S12516R fabric module, Type H (Class C)
0231AD2A	LSXM1SFH16ER1	H3C S12516R fabric module, Type H (Class E)
0231AD28	LSXM1SFH08CR1	H3C S12508R fabric module, Type H (Class C)
0231AD27	LSXM1SFH08DR1	H3C S12508R fabric module, Type H(Class D)
0231AD29	LSXM1SFH04DR1	H3C S12504R fabric module, Type H(Class D)
0231AFCT	LSXM1SFK16ER1	H3C S12516R fabric module, Type K(Class E)
0231AE48	LSXM1SFK16GR1	H3C S12516R fabric module, Type K(Class G)
0231AFCU	LSXM1SFK08ER1	H3C S12508R fabric module, Type K(Class E)
0231AETV	LSXM1SFK08GR1	H3C S12508R fabric module, Type K(Class G)
0231AETW	LSXM1SFK04FR1	H3C S12504R fabric module, Type K(Class F)
Interface modules
0231AD2D	LSXM1CGQ36HBR1	H3C S12500R 36-Port 100GBASE Ethernet optical interface module (QSFP28) (HB)
0231AD2E	LSXM1CGQ36HFR1	H3C S12500R 36-Port 100GBASE Ethernet optical interface module (QSFP28) (HF)
0231AEM6	LSXM1TGS48HFR1	H3C S12500R 48-port 10GBASE Ethernet optical interface module (SFP+,LC)(HF)
0231AEM8	LSXM1CGQ18QGHFR1	H3C S12500R 18-port 100GBASE Ethernet optical interface (QSFP28)/36-port 40GBASE Ethernet optical interface module (QSFP+)(HF)
0231AEM7	LSXM1CGQ6QGHFR1	H3C S12500R 6-port 100GBASE Ethernet optical interface (QSFP28)/12-port 40GBASE Ethernet optical interface module (QSFP+)(HF)
0231AE03	LSXM1TGS48HBR1	H3C S12500R 48-port 10GBASE Ethernet optical interface module (SFP+,LC)(HB)
0231AE04	LSXM1CGQ18QGHBR1	H3C S12500R 18-port 100GBASE Ethernet optical interface (QSFP28)/36-port 40GBASE Ethernet Optical interface module (QSFP+)(HB)
0231AHS0	LSXM1CGQ48KB1	H3C S12500X-AF 48-port 100GBASE Ethernet optical interface module (QSFP28) (KB)
0231AKY5	LSXM2CGQ48KBR1	H3C S12500R 48-port 100GBASE Ethernet optical interface module (QSFP28)(KB)
0231ABS3	LSXM1CDQ24KB1	H3C S12500X-AF 24-port 400GBASE Ethernet optical interface module(QSFP-DD)(KB)
0231AE39	LSXM1CDQ24KBR1	H3C S12500R 24-port 400GBASE Ethernet optical interface module (QSFP-DD) (KB)
0231AE3B	LSXM1CGQ48KBR1	H3C S12500R 48-port 100GBASE Ethernet optical interface module (QSFP28) (KB)
0231AM6Y	LSXM1CDQ18KCR1	H3C S12500R 18-port 400GBASE Ethernet optical interface module (QSFP-DD)(KC)
0231AFPW	LSXM1CCQ48KBR1	H3C S12500R 48-port 200GBASE Ethernet optical interface module (QSFP56) (KB)
0231AG0A	LSXM1MOD24KBR1	H3C S12500R 24KBR flexible line processing platform module
0231AG2P	LSXM1CGQFX16KBR1	H3C S12500R 16-port 100GBASE FlexE Ethernet optical interface module(QSFP28)
0231AH8C	LSXM1CGMS48KBR1	H3C S12500R 48-port 100GBASE MACsec Ethernet optical interface module (QSFP28)
0231AGX6	LSXM1CGQ72KCR1	H3C S12500R 36-port 200GBASE Ethernet optical interface (QSFP56)/72-port 100GBASE Ethernet optical interface module (QSFP28)(KC)
Interface modules available for the LSXM1MOD24KBR1
0231AFVG	LSXM1CGQ18C1	18-port 100GBASE Ethernet optical interface module (QSFP28)
0231AG38	LSXM1CGQ8C1	8-port 100GBASE Ethernet optical interface module (QSFP28)
0231AG2N	LSXM1TGS24C1	24-port 100GBASE Ethernet optical interface module (SFP+,LC)
Fan trays
0231A2T1	LSXM116XFAN	Fan module for the H3C S12516R
0231A2UH	LSXM108XFAN	Fan module for the H3C S12508R
0231A2X9	LSXM104XFAN	Fan module for the H3C S12504R
0231A4WX	LSXM116XFANH	High speed fan module for the H3C S12516R
0231A4X0	LSXM108XFANH	High speed fan module for the H3C S12508R
0231A4X1	LSXM104XFANH	High speed fan module for the H3C S12504R
0231ABVR	LSXM102LFAN	H3C S12500R-2L Ethernet switch router fan module
Power supplies
0231A2KX	LSVM3PSRA	1800W AC power supply
0231A2KY	PSR1800-56D	1800W DC power supply
0231A2SN	PSR2400-54A	2400W AC power supply
0231A2X7	PSR2400-54D	2400W DC power supply
0231A5CH	PSR3000-54A	3000W AC power supply
0231A6PS	PSR3000-54AHD	3000W AC & 240V-380V HVDC power supply
0231AK4Y	PSR2400-54AA-B	Dual input 2400W AC power supply
Power cords
0404A0E1	CAB-DC Pwr-3m-2	External DC power cable, 3m, 13mm^2, PWR63A-B-2, 6UL10455BL+6UL10455B, 2(T16-12G)+2OT(16-6-0)!+2*OT(16-8-0)!
0404A0E2	CAB-DC Pwr-15m-2	External DC power cable, 15m, 13mm^2, PWR63A-B-2, 6UL10455BL+6UL10455B, 2(T16-12G)+2OT(16-6-0)!+2*OT(16-8-0)!
0404A0H4	CAB-AC-CHI-C19RA-3m	Chinese AC power cable (C19 right angle), 3.0m, 1.5mm^2, black, PI250V16AAM, 227 IEC 53(RVV)3*1.5mm^2B, C19-250V16ARAF
04043396	CAB-AC Pwr CHI-3m	Chinese AC power cable 220V16A, 3m, 3*1.5mm^2, black, I-Type angle plug, 227IEC53-1.5^2(3C), C19 straight connector
0404A0C2	CAB-AC Pwr 3C-3m-PDU	External power cable, Chinese AC power cable 220V16A, 3m, 3*1.5mm^2, black, C20 straight plug, 227IEC53-1.5^2(3C), C19 straight connector, PDU
0404A0GE	CAB-HVDC-16A-PDU-3m-Y	High voltage DC power cable (yellow), 3m, 1.5mm^2, pantone yellow 121C, C20-250V16A, 227IEC53(RVV)3*1.5mm^2 pantone yellow 121C, C19-250V16A
0404A0GK	CAB-HVDC-250V16A-3m-Y	High voltage DC power cable (yellow), 3m, 1.5mm^2, pantone yellow 121C, PI angle plug, 227IEC53(RVV)3*1.5mm^2PANTONE YELLOW 121C, C19-250V16A
0404A0HS	CAB-AC-PWR-3m-C20-C19RA	External AC power cable, 3m, 31.5mm^2, black, C20-250V16A, 227IEC53(RVV)31.5mm^2B, C19RA-250V16A
0404A0LH	CAB-HVDC-16A-PDU-5m-Y	High voltage DC power cable (yellow), 5m, 1.5mm^2, pantone yellow 121C, C20-250V16A, 227IEC53(RVV)3*1.5mm^2 pantone yellow 121C, C19-250V16A
0404A0NH	CAB-PDU PWR-3m-C19A-C20	Chinese PDU power cable (C19A-C20) yellow, 3.0m, 31.5mm^2, pantone yellow 121C, C20-250V16ASM, 227 IEC 53(RVV)31.5mm^2 pantone yellow 121C,C19-250V16AAF
0404A0RQ	CAB-AC-Pwr-3m-PW3C450V	External AC power cable, 3m, 31.5mm^2, black, PW3C-16A450V, 227IEC53(RVV)31.5mm^2B, PI-16A250V-SM
0404A0RP	CAB-PDU Pwr-3m-PW3C450V	External AC PDU power cable, 3m, 31.5mm^2, black, PW3C-16A450V, 227IEC 53(RVV)31.5mm^2B, C20-16A250V
0404A0RL	CAB-HVDC Pwr-3m-336V	336V high voltage DC power cable, 3m, 31.5mm^2, black, PW3C-16A450V, 227IEC53(RVV)31.5mm^2B, 3T1.5mm^2-8R+3OT(2.5-6-0)!
Fabric module slot filler panels
0231A3RK	LSXM1BFP16A	16 fabric blank filler panel
0231A3RL	LSXM1BFP08A	08 fabric blank filler panel
0231A3RM	LSXM1BFP04A	04 fabric blank filler panel
Slide rails
0231A4EK	LSXM1BSR	1U bottom-support rails, 630mm-900mm
0231A0PL	LSTM2KSGD0	Slide rail accessories, 500mm-800mm
0231A2VL	LSVM1BSR10	H3C S9810 bottom support rails, 630mm-900mm

H3C S12500R Switch Router Series Hardware Reference-6W106

Chassis views

Chassis components

Technical specifications

Module power consumption

Power consumption of interface modules available for the LSXM1MOD24KBR1

Fan tray power consumption

System power consumption

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

Type K 400G interface modules

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs

View

Technical specifications

Ports and LEDs