H3C S12500AI switch series

H3C S12500AI-6C-NCCA

LS-12500AI-6C-NCCA

H3C S12500AI-96B-NCFK

LS-12500AI-96B-NCFK

H3C S12500AI-36B48B-NCPK

LS-12500AI-36B48B-NCPK

H3C S12500AI-18D48B-NCPK

LS-12500AI-18D48B-NCPK

Physical specifications

Dimensions (H × W × D)

44 × 440 × 400 mm (1.73 × 17.32 × 15.75 in)

Dimensions (H × W × D, with package materials)

180 × 576 × 638 mm (7.09 × 22.68 × 25.12 in)

Weight

≤ 10 kg (22.05 lb)

Technical specifications

Processor

8 cores, 2.2 GHz

DRAM memory

64 GB

NOR flash

32 MB × 2

NAND flash

eMMC 64G

Port types and quantity

Console port

1

Management Ethernet port

1

USB port

1

SMB coaxial clock port

Input: 1

Output: 1

SFP HP-GE port

1

1PPS/TOD port

1

SFP28 IPC port

2

QSFP28 IPC port

6

Fan trays and power supplies

Fan tray slot

4

Power supply slot

2

Power supply specifications

Power input

AC input, HVDC input

Power specifications

See "Power supplies"

System power consumption

Typical power consumption

(Fully configured with cables, 50% loaded)

120 W

Maximum power consumption

(Fully configured with transceiver modules, 100% loaded)

300 W

System thermal consumption

Typical thermal consumption

409.45 BTU/h

Maximum thermal consumption

716.54 BTU/h

Heat dissipation

Heat dissipation method

Air cooling

Ventilation aisles

Front-to-rear

Reliability and availability

Power supply redundancy

1+1 redundancy

Fan tray redundancy

3+1 redundancy

Hot swapping

Power supplies and fan trays support hot swapping

Mean time between failure (MTBF) (year)

52.8

Mean time to repair (MTTR) (hour)

0.5

Availability

99.9999%

Environment specifications

Sound pressure level at 27°C (80.6°F)

41.8 dBA

Altitude

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Operating temperature

0°C to 40°C (32°F to 104°F)

Note:

The allowed maximum temperature decreases by 0.33 °C (32.59°F) as the altitude increases by 100 m (328.08 ft) from 0 m (0 ft).

Storage temperature

–40°C to +70°C (–40°F to +158°F)

Relative humidity

5% RH to 95% RH, noncondensing

Product compliance

Product compliance

·     Safety standards

·     EMC standards

·     Environmental and eco-friendly standards

Physical specifications

Dimensions (H × W × D)

130.5 × 440 × 760 mm (5.14 × 17.32 × 29.92 in)

Dimensions (H × W × D, with package materials)

391 × 655 × 1092 mm (15.39 × 25.79 × 42.99 in)

Weight (fully configured)

≤ 25 kg (55.11 lb)

Technical specifications

Processor

4 cores, 2.9 GHz

DRAM memory

32 GB

NOR flash

32 MB × 2 (primary and backup)

NAND flash

eMMC 4G

Port types and quantity

Console port

1

Management Ethernet port

1

USB port

1

SFP+ IPC port

2

QSFP56 SFI port

96

Fan trays and power supplies

Fan tray slot

4

Power supply slot

2

Power supply specifications

Power input

AC input, HVDC input

Power specifications

See "Power supplies"

System power consumption

Typical power consumption

(Fully configured with cables, 50% loaded)

Single AC input: 560 W

Dual AC inputs: 605 W

Maximum power consumption

(Fully configured with transceiver modules, 100% loaded)

Single AC input: 1720 W

Dual AC inputs: 1730 W

System thermal consumption

Typical thermal consumption

Single AC input: 1910.78 BTU/h

Dual AC inputs: 2064.32 BTU/h

Maximum thermal consumption

Single AC input: 4108.17 BTU/h

Dual AC inputs: 4132.05 BTU/h

Heat dissipation

Heat dissipation method

Air cooling

Ventilation aisles

Front-to-rear

Reliability and availability

Power supply redundancy

1+1 redundancy

Fan tray redundancy

3+1 redundancy

Hot swapping

Power supplies and fan trays support hot swapping

Mean time between failure (MTBF) (year)

41.4

Mean time to repair (MTTR) (hour)

0.5

Availability

99.9999%

Environment specifications

Sound pressure level at 27°C (80.6°F)

66.6 dBA

Altitude

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Operating temperature

0°C to 40°C (32°F to 104°F)

Note:

The allowed maximum temperature decreases by 0.33 °C (32.59°F) as the altitude increases by 100 m (328.08 ft) from 0 m (0 ft).

Storage temperature

–40°C to +70°C (–40°F to +158°F)

Relative humidity

5% RH to 95% RH, noncondensing

Product compliance

Product compliance

·     Safety standards

·     EMC standards

·     Environmental and eco-friendly standards

Physical specifications

Dimensions (H × W × D)

88.1 × 440 × 760 mm (3.47 × 17.32 × 29.92 in)

88.1 × 440 × 760 mm (3.47 × 17.32 × 29.92 in)

Dimensions (H × W × D, with package materials)

255 × 590 × 1135 mm (10.04 × 23.23 × 44.69 in)

255 × 590 × 1135 mm (10.04 × 23.23 × 44.69 in)

Weight (fully configured)

≤ 25 kg (55.11 lb)

≤ 25 kg (55.11 lb)

Technical specifications

Processor

4 cores, 2.9 GHz

4 cores, 2.9 GHz

DRAM memory

32 GB

32 GB

NOR flash

32 MB × 2 (primary and backup)

32 MB × 2 (primary and backup)

NAND flash

eMMC 4G

eMMC 4G

Port types and quantity

Console port

1

1

Management Ethernet port

1

1

USB port

1

1

SMB coaxial clock port

Input: 1

Output: 1

Input: 1

Output: 1

SFP HP-GE port

1

1

1PPS/TOD port

1

1

SFP+ IPC port

1

1

QSFP56 SFI port

48

48

QSFP56 service port

36

N/A

QSFP-DD service port

N/A

18

Fan trays and power supplies

Fan tray slot

4

4

Power supply slot

2

2

Power specifications

Power input

AC input, HVDC input

Power specifications

See "Power supplies"

System power consumption

Typical power consumption

(Fully configured with cables, 50% loaded)

Single AC input: 490 W

Dual AC inputs: 510 W

Single AC input: 490 W

Dual AC inputs: 535 W

Maximum power consumption

(Fully configured with transceiver modules, 100% loaded)

Single AC input: 1775 W

Dual AC inputs: 1815 W

Single AC input: 1850 W

Dual AC inputs: 1860 W

System thermal consumption

Typical thermal consumption

Single AC input: 1671.93 BTU/h

Dual AC inputs: 1740.17 BTU/h

Single AC input: 1671.93 BTU/h

Dual AC inputs: 1825.47 BTU/h

Maximum thermal consumption

Single AC input: 4239.53 BTU/h

Dual AC inputs: 4335.07 BTU/h

Single AC input: 4418.67 BTU/h

Dual AC inputs: 4442.55 BTU/h

Heat dissipation

Heat dissipation method

Air cooling

Ventilation aisles

Front-to-rear

Reliability and availability

Power supply redundancy

1+1 redundancy

Fan tray redundancy

3+1 redundancy

Hot swapping

Power supplies and fan trays support hot swapping

Mean time between failure (MTBF) (year)

39.37

39.43

Mean time to repair (MTTR) (hour)

0.5

0.5

Availability

99.9998%

99.9998%

Environment specifications

Sound pressure level at 27°C (80.6°F)

64.9 dBA

64.0 dBA

Altitude

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Operating temperature

0°C to 40°C (32°F to 104°F)

Note:

The allowed maximum temperature decreases by 0.33 °C (32.59°F) as the altitude increases by 100 m (328.08 ft) from 0 m (0 ft).

Storage temperature

–40°C to +70°C (–40°F to +158°F)

Relative humidity

5% RH to 95% RH, noncondensing

Product compliance

Product compliance

·     Safety standards

·     EMC standards

·     Environmental and eco-friendly standards

Power supplies

SW-A-PSR550-12A-B

0231AKX6

Supported

N/A

N/A

N/A

SW-B-PSR550-12A-B

0231AKX7

Supported

N/A

N/A

N/A

PSR2000-12A-S

0231AMP2

N/A

Supported

Supported

Supported

PSR2000-12A-S-B

0231AMNW

N/A

Supported

Supported

Supported

Fan trays

FAN-40B-1-C

9803A00F

Supported

N/A

N/A

N/A

FAN-80B-1-D

0231AMNR

N/A

Supported

Supported

Supported

Protection function

The power supply provides protection against input overcurrent, input undervoltage, output overvoltage, output shortcircuit, and overtemperature conditions.

Support for redundancy

Multiple power supplies can be connected in parallel to achieve N+1 or N+N redundancy and load balancing.

Support for hot swapping

You can remove one of the power supplies in redundancy when the switch is operating.

Dimensions (H × W × D, including the handle)

185 × 73.5 × 40 mm (7.28 × 2.89 × 1.57 in)

Weight

0.750 kg (1.65 lb)

Rated AC input voltage range

100 to 240 VAC @ 50 or 60 Hz

Max AC input voltage range

90 to 264 VAC

Rated HVDC input voltage range

240 VDC

Max HVDC input voltage range

190 to 310 VDC

Rated input current

7.0 A Max @ 100 to 240 VAC

3.5 A Max @ 240 VDC

Rated output current

45 A

Rated output voltage

12 V

Rated output power

550 W

Melting current of power supply fuse

10 A

Protection function

The power supply provides protection against input overcurrent, input undervoltage, output overvoltage, output shortcircuit, and overtemperature conditions.

Support for redundancy

Multiple power supplies can be connected in parallel to achieve N+1 or N+N redundancy and load balancing.

Support for hot swapping

You can remove one of the power supplies in redundancy when the switch is operating.

Dimensions (H × W × D, including the handle)

185 × 73.5 × 40 mm (7.28 × 2.89 × 1.57 in)

Weight

0.775 kg (1.71 lb)

Rated AC input voltage range

100 to 240 VAC @ 50 or 60 Hz

Max AC input voltage range

90 to 264 VAC

Rated HVDC input voltage range

240 VDC

Max HVDC input voltage range

190 to 310 VDC

Rated input current

7.0 A Max @ 100 to 240 VAC

3.5 A Max @ 240 VDC

Rated output current

45 A

Rated output voltage

12 V

Rated output power

550 W

Melting current of power supply fuse

10 A

Protection function

The power supply provides protection against input overcurrent, input undervoltage, output overvoltage, output shortcircuit, and overtemperature conditions.

Support for redundancy

Multiple power supplies can be connected in parallel to achieve N+1 or N+N redundancy and load balancing.

Support for hot swapping

You can remove one of the power supplies in redundancy when the switch is operating.

Dimensions (H × W × D, including the handle)

185 × 73.5 × 40 mm (7.28 × 2.89 × 1.57 in)

Weight

0.936 kg (2.06 lb)

Rated AC input voltage range

100 to 240 VAC @ 50 or 60 Hz

Max AC input voltage range

90 to 264 VAC

Rated HVDC input voltage range

270 VDC

Max HVDC input voltage range

180 to 320 VDC

Rated input current

12 A Max @ 100 to 127 VAC

10 A Max @ 200 to 240 VAC

10 A Max @ 270 VDC

Rated output current

164 A

Rated output voltage

12.2 V

Rated output power

2000 W

Melting current of power supply fuse

15 A

Protection function

The power supply provides protection against input overcurrent, input undervoltage, output overvoltage, output shortcircuit, and overtemperature conditions.

Support for redundancy

Multiple power supplies can be connected in parallel to achieve N+1 or N+N redundancy and load balancing.

Support for hot swapping

You can remove one of the power supplies in redundancy when the switch is operating.

Dimensions (H × W × D, including the handle)

185 × 73.5 × 40 mm (7.28 × 2.89 × 1.57 in)

Weight

0.945 kg (2.08 lb)

Rated AC input voltage range

100 to 240 VAC @ 50 or 60 Hz

Max AC input voltage range

90 to 264 VAC

Rated HVDC input voltage range

270 VDC

Max HVDC input voltage range

180 to 320 VDC

Rated input current

12 A Max @ 100 to 127 VAC

10 A Max @ 200 to 240 VAC

10 A Max @ 270 VDC

Rated output current

164 A

Rated output voltage

12.2 V

Rated output power

2000 W

Melting current of power supply fuse

15 A

Dimensions (H × W × D, including the handle)

40 × 40 × 136 mm (1.57 × 1.57 × 5.35 in)

Weight

0.12 kg (0.26 lb)

Airflow direction

Air exhausted from the fan tray faceplate

Max fan speed

29000 R.P.M

Max air flow rate

38 CFM (1.08 m3/min)

Input voltage

12 V

Max power consumption

60 W

Dimensions (H × W × D, including the handle)

80 × 80 × 136 mm (3.15 × 3.15 × 5.35 in)

Weight

0.5 kg (1.10 lb)

Airflow direction

Air exhausted from the fan tray faceplate

Max fan speed

Inlet: 16000 R.P.M

Outlet: 14000 R.P.M

Max air flow rate

163.92 CFM (4.64 m3/min)

Input voltage

12 V

Max power consumption

105.6 W

Connector type

RJ-45

Compliant standard

EIA/TIA-232

Operating mode

Duplex Universal Asynchronous Receiver/Transmitter (UART)

Transmission baud rate

9600 bps (default) to 115200 bps

Supported services

·     Provides connection to an ASCII terminal

·     Provides connection to the serial port of a local terminal (for example, a PC) running a terminal emulation program

Connector type

RJ-45

Connector quantity

1

Compliant standard

IEEE802.3ab

Transmission baud rate

·     10 Mbps, full/half duplex

·     100 Mbps, full/half duplex

·     1000 Mbps, full duplex

·     MDI/MDI-X, auto-sensing

Transmission medium and max transmission distance

10/100/1000BASE-T management port: 100 m (328.08 ft) over a Category 5 unshielded twisted pair (UTP)

Functions and services

For device software upgrade and network management

Connector type

SMB coaxial

Description

Sends and receives 2.048 MHz clock signals and 2.048 Mbps signals to synchronize the clocks of the switch and other devices

Compliant standard

GJB681

Transmission baud rate

2.048 Mbps

Transmission medium

75-ohm coaxial cable

Connector type

RJ-45

Description

Synchronizes the clocks of the switch and other devices

Compliant standard

QB-B-016-2010

Port name

1GE SFP HP-GE port

Connector type

LC

Description

Transmits and receives clock signals

Compliant standard

IEEE802.3ab

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

1000/100 Mbps autosensing, full duplex

Available transceiver modules and cables

·     1G SFP modules

·     100M SFP modules

Port name

10GE SFP+ IPC port

Connector type

LC

Description

Transmits management packets in the Distributed Disaggregated Chassis (DDC) cloud cluster

Compliant standard

IEEE802.3ae

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

1000 Mbps/10 Gbps autosensing, full duplex

Available transceiver modules and cables

·     10G SFP+ modules

·     10G SFP+ copper cables

·     10G SFP+ AOC cables

·     1G SFP modules

Port name

25GE/10GE SFP28 IPC port

Connector type

LC

Description

Transmits management packets in the DDC cloud cluster

Compliant standard

IEEE802.3by

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

Full duplex

Available transceiver modules and cables

·     25G SFP28 modules/cables

·     10G SFP+ modules/cables

·     1G SFP modules

Port name

100GE/40GE QSFP28 fiber port

Available switch models

LS-12500AI-6C-NCCA

Connector type

LC/MPO

Description

Transmits management packets in the DDC cloud cluster

Compliant standard

IEEE802.3ba

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

Full duplex

Available transceiver modules and cables

·     100G QSFP28 modules

·     100G QSFP28 copper cables

·     100G QSFP28 AOC cables

·     100G QSFP28 to 4 × 25G SFP28 copper cables

·     40G QSFP+ modules

·     40G QSFP+ copper cables

·     40G QSFP+ AOC cables

·     40G QSFP+ to 4 × 10G SFP+ copper cables

Port name

200GE QSFP56 fiber port

Connector type

LC/MPO

Description

Connects an NCF and an NCP and switches cross-NCP service data

Compliant standard

IEEE 802.3cd

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

Full duplex

Available transceiver modules and cables

·     200G QSFP56 transceiver modules

·     200G QSFP56 copper cables

·     200G QSFP56 AOC cables

Port name

200GE QSFP56 fiber port

Connector type

LC/MPO

Description

Connects to an external device and transmits and receives service packets

Compliant standard

IEEE 802.3cd

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

Full duplex

Available transceiver modules and cables

·     200G QSFP56 transceiver modules

·     200G QSFP56 copper cables

·     200G QSFP56 AOC cables

Port name

400GE QSFP-DD fiber port

Connector type

LC/MPO

Description

Connects to an external device and transmits and receives service packets

Compliant standard

IEEE 802.3bs

Fiber port attribute

Depends on the transceiver module or cable installed

Operating mode

Full duplex

Available transceiver modules and cables

·     400G QSFP-DD modules

·     400G QSFP-DD copper cables

·     400G QSFP-DD AOC cables

ID/SYS

Steady green

The switch has started up correctly.

Flashing green at 4 Hz

The switch is performing power-on self test (POST) or loading software.

Steady red

The switch has failed POST or the switch is faulty.

Steady yellow

The following are the possible causes:

·     A fan tray has failed.

·     A power supply has failed.

·     The bus has failed.

Flashing blue at 3 Hz

Helps you locate the switch.

Off

The switch is powered off or has not started up correctly.

PSU

Off

The switch is not powered on.

Steady green

Both power supplies are operating correctly.

Steady yellow

A power supply is faulty or not present.

FAN

Off

The switch is not powered on.

Steady green

All present fan trays are operating correctly.

Steady yellow

A fan tray is operating incorrectly.

Steady red

More than one fan tray is operating incorrectly.

ACT

Steady green

The switch is in primary state.

Off

The switch is in backup state.

Steady green

A module has been installed and a link is present on the port.

Flashing green

The port is receiving or sending data.

Off

No module has been installed or no link is present on the port.

Steady green

A module has been installed and a link is present on the port.

Flashing green

The port is receiving or sending data.

Off

No module has been installed or no link is present on the port.

Steady green

A module has been installed and a link is present on the port.

Flashing green

The port is receiving or sending data.

Off

No module has been installed or no link is present on the port.

Steady green

A module has been installed and a link is present on the port.

Flashing green

The port is receiving or sending data.

Off

No module has been installed or no link is present on the port.

Steady green

A module has been installed and the four lanes each have a link.

Steady yellow

A module has been installed and one to three lanes each have a link.

Off

No module has been installed or no lane has a link.

Steady green

A module has been installed and a link is present on the port.

Flashing green

The port is receiving or sending data.

Off

No module has been installed or no link is present on the port.

Steady green

A module has been installed in the port. A link is present on the port and the port is operating at its maximum speed of 400 Gbps.

Flashing green

The port is receiving or sending data at its maximum speed of 400 Gbps.

Off

No module has been installed or no link is present on the port.

LINK

Off

No link is present on the management Ethernet port.

Steady green

The management Ethernet port is operating at 10/100/1000 Mbps.

ACT

Off

The management Ethernet port is not receiving or sending data.

Flashing yellow

The management Ethernet port is receiving or sending data.

Steady green

The power supply is operating correctly.

Flashing green at 1 Hz

Power is being input correctly but the system is not powered on.

Flashing green at 0.33 Hz

The power supply is in standby state and is not outputting power.

Flashing green at 2 Hz

The power supply is updating its firmware.

Steady amber

·     The power supply has failed.

·     The power supply does not have power input, but the other power supply has correct power input.

Flashing amber at 1 Hz

An alarm has occurred on the power supply.

Off

No power input, which can be caused by an incorrect power cord connection or power source shutdown.

Steady green

The power supply is operating correctly and is in active state.

Flashing green at 1 Hz

The power supply is operating correctly and is in standby state.

Flashing green at 2 Hz

The power supply is updating the software.

Steady amber

The power supply has failed or has entered a protection state.

Flashing amber at 1 Hz

An alarm has occurred because one of the following conditions exists on the power supply but the power supply does not enter protection state:

·     Output overvoltage.

·     Output undervoltage.

·     Output overcurrent.

·     Output power overload.

·     Overtemperature.

Flashing amber at 2 Hz

The power supply does not have power input but the power supply working in parallel with it has power input.

Off

Neither this power supply nor the power supply working in parallel with it has power input.

Steady green

The fan tray is operating correctly.

Steady red

The fan tray is operating incorrectly.

Off

The fan tray is operating incorrectly or not powered on.

LS-12500AI-6C-NCCA

FAN-40B-1-C

From the port side to the power supply side

LS-12500AI-96B-NCFK

FAN-80B-1-D

From the port side to the power supply side

LS-12500AI-36B48B-NCPK

FAN-80B-1-D

From the port side to the power supply side

LS-12500AI-18D48B-NCPK

FAN-80B-1-D

From the port side to the power supply side