Contents

Software upgrade commands· 1

boot-loader file· 1

boot-loader update· 4

display boot-loader 5

display version· 6

display version-update-record· 7

reset version-update-record· 8

 

Software upgrade commands

As a best practice, store the startup images in a fixed storage medium. If you store the startup images in a hot swappable storage medium, do not remove the hot swappable storage medium during the startup process.

boot-loader file

Use boot-loader file to specify startup image files.

Syntax

boot-loader file boot filename system filename [ feature filename&<1-30> ] [ patch filename&<1-30> ] { all | slot slot-number } { backup | main }

boot-loader file ipe-filename [ patch filename&<1-30> ] { all | slot slot-number } { backup | main }

Views

User view

Predefined user roles

network-admin

Parameters

boot: Specifies a boot image file.

system: Specifies a system image file.

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a space-separated list of up to 30 incremental patch image files or 16 non-incremental patch image files. Because the boot, system, and feature images each can have one non-incremental patch image file, you can specify a maximum of 16 non-incremental patch image files.

filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see Fundamentals Configuration Guide.

ipe-filename: Specifies an .ipe image package file in the filesystemname/filename.ipe format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see Fundamentals Configuration Guide.

all: Specifies all hardware components to which the specified images apply.

slot slot-number: Specifies the slot number of an MPU

backup: Specifies the files as backup startup image files. Backup images are used only when main images are not available.

main: Specifies the files as main startup image files. The device always first attempts to start up with main startup files.

Usage guidelines

Application scenarios

When the current software cannot meet the requirements of network operation or user services, you can use this command to upgrade the software to optimize device performance to meet the requirements.

Operating mechanism

The boot-loader file command overwrites the entire startup image list. To add new startup feature images, specify all feature image files in the old startup image list, including feature image files. The new startup image list will contain only the feature image files that are specified in the command.

If the upgrade images are not found in the file system on the slot specified to upgrade, the system automatically copies the images to that file system. The destination directory is the root directory of the file system. If the destination root directory already contains a startup image with the same name as an upgrade image, you must choose whether to overwrite the image.

Restrictions and guidelines

The system will verify the digital signature of the specified images before it updates the startup image list with the specified images. If the digital signature verification fails, the system will not update the startup image list and you will receive a digital signature verification failure message.

To load the specified startup software images, you must reboot the system.

Examples

# Specify sda0:/all.ipe as the main startup image file for slot 1.

<Sysname> boot-loader file flash:/all.ipe slot 1 main

Verifying the file sda0:/all.ipe on slot 1..............Done.

H3C SR6602 images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:Y

Add images to slot 1.

File flash:/boot.bin already exists on slot 1.

File flash:/system.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:Y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin...............................Done.

Verifying the file flash:/boot.bin on slot 1...Done.

Verifying the file flash:/system.bin on slot 1.............Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

# Specify flash:/all.ipe as the main startup image file.

<Sysname> boot-loader file flash:/all.ipe all main

Verifying the file sda0:/all.ipe on slot 1..............Done.

H3C SR6602 images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:y

Add images to slot 1.

File flash:/boot.bin already exists on slot 1.

File flash:/system.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin...............................Done.

Verifying the file flash:/boot.bin on slot 1...Done.

Verifying the file flash:/system.bin on slot 1.............Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

File flash:/boot.bin already exists on slot 0.

Do you want to overwrite the file?

 Y: Overwrite the file.

 N: Not overwrite the file.

 A: From now on, overwrite or not overwrite without prompt.

Please make a choice. [Y/N/A]:a

What type of overwrite operation do you want to perform?

  Y: Overwrite without prompt.

  N: Not overwrite or display prompt.

  Q: Return to the previous step.

Please make a choice. [Y/N/Q]:y

An existing file will be overwritten without prompt if it has the same name as any upgrade file.

Loading......................Done.

Loading......................Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 0.

Decompression completed.                                                       

Do you want to delete flash:/all.ipe now? [Y/N]:n

# Specify flash:/all.ipe as the main startup image file for slot 1, without immediately decompressing the IPE file.

<Sysname> boot-loader file flash:/all.ipe slot 1 main undecompressed

Verifying the file flash:/all.ipe on slot 1..............Done.

XX images in IPE:

  boot.bin

  system.bin

This command will set the main startup software image. Continue? [Y/N]:Y

File flash:/all.ipe already exists on slot 1.

Overwrite the existing files? [Y/N]:Y

Copying file flash:/all.ipe to slot1#flash:/all.ipe...Done.

The image that have passed all examinations will be used as the main startup software image at the next reboot on slot 1.

# Specify flash:/all.ipe as the main startup image file, without immediately decompressing the IPE file.

<Sysname> boot-loader file flash:/all.ipe all main undecompressed

Verifying the file flash:/all.ipe on slot 1..............Done.

XX Switch images in IPE:

  Boot.bin

  System.bin

This command will set the main startup software images. Continue? [Y/N]:Y

The image that have passed all examinations will be used as the main startup software image at the next reboot on slot 1.

File flash:/all.ipe already exists on slot 0.

Do you want to overwrite the file?

 Y: Overwrite the file.

 N: Not overwrite the file.

 A: From now on, overwrite or not overwrite without prompt.

Please make a choice. [Y/N/A]:a

What type of overwrite operation do you want to perform?

  Y: Overwrite without prompt.

  N: Not overwrite or display prompt.

  Q: Return to the previous step.

Please make a choice. [Y/N/Q]:Y

An existing file will be overwritten without prompt if it has the same name as any upgrade file.

Loading......................Done.

The image that have passed all examinations will be used as the main startup software image at the next reboot on slot 0.

Related commands

display boot-loader

boot-loader update

Use boot-loader update to synchronize startup images.

Syntax

boot-loader update { all || slot slot-number}

Views

User view

Predefined user roles

network-admin

Parameters

all: Synchronizes startup images from the active MPU to the standby MPU.

slot slot-number: Specifies the slot number of the standby MPU.

Usage guidelines

Application scenarios

You can use this command to synchronize startup images after adding new MPUs.

Operating mechanism

The images used for synchronization are in the main or backup startup software images list instead of the current software images list (see the display boot-loader command).

·     The main images list is used if the active MPU started up with the main startup images.

·     The backup image list is used if the active MPU started up with the backup startup images.

The startup images synchronized to a standby MPU are set as main startup images, regardless of whether the source startup images are main or backup.

Restrictions and guidelines

Startup image synchronization fails if any software image being synchronized is not available or is corrupted.

Examples

# Synchronize startup images to a slot.

<Sysname> boot-loader update slot 2

This command will update the specified standby MPU. Continue? [Y/N]:y

Updating. Please wait...

Verifying the file sda0:/boot.bin on slot 1...Done.

Verifying the file sda0:/system.bin on slot 1....Done.

Copying main startup software images to slot 2. Please wait...

Done.

Setting copied images as main startup software images for slot 2...

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 2.

Done.

Successfully updated the startup software images of slot 2.

Related commands

display boot-loader

display boot-loader

Use display boot-loader to display current software images and startup software images.

Syntax

display boot-loader [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the slot number of an MPU. If you do not specify an MPU, this command displays the software images on each MPU.

Examples

# Display the current software images and startup software images.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  flash:/boot.bin

  flash:/system.bin

Main startup software images:

  flash:/boot.bin

  flash:/system.bin

Backup startup software images:

  flash:/boot_backup.bin

  flash:/system_backup.bin

# Display the current software images and startup software images.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  Image                 Version

  sda0:/boot.bin       Release 0053

  sda0:/system.bin     Release 0053

Main startup software images:

  Image                 Version

  sda0:/boot.bin       Release 0054

  sda0:/system.bin     Release 0054

Backup startup software images:

  Image                 Version

  sda0:/b-boot.bin     --

  sda0:/b-system.bin   --

Table 1 Command output

Field	Description
Current software images	Comware images that have been loaded.
Main startup software images	Primary Comware images for the next startup.
Backup startup software images	Backup Comware images for the next startup.

 

Related commands

boot-loader file

display version

Use display version to display system version information.

Syntax

display version

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display system version information.

<Sysname> display version

H3C Comware Software, Version 9.0.001, ESS 9112P05

Copyright (c) 2004-2021 New H3C Technologies Co., Ltd. All rights reserved.

H3C SR6602 uptime is 0 weeks, 3 days, 4 hours, 2 minutes

Last reboot reason : User reboot

Boot image: sda0:/sr6602i-cmw910-boot-e9112p05.bin

Boot image version: 9.0.001, ESS 9112P05

  Compiled Apr 25 2021 14:00:00

System image: sda0:/sr6602i-cmw910-system-e9112p05.bin

System image version: 9.0.001, ESS 9112P05

  Compiled Apr 25 2021 14:00:00

Feature image(s) list:

  sda0:/sr6602i-cmw910-devkit-e9112p05.bin, version: 9.0.001

    Compiled Apr 25 2021 14:00:00

  sda0:/sr6602i-cmw910-virtualization-e9112p05.bin, version: 9.0.001

    Compiled Apr 25 2021 14:00:00

 

…

Table 2 Command output

Field

Description

Last reboot reason

Reason for the last reboot: ·     User reboot—The reboot was manually initiated from a user interface, such as the CLI or SNMP. ·     Cold reboot—The reboot was caused by a power cycle. ·     Kernel abnormality reboot—The reboot was caused by kernel exceptions. ·     DeadLoop reboot—The reboot was caused by a kernel thread dead loop. ·     DEV HandShake reboot—The reboot was caused by a device management handshake failure. ·     SlaveSwitch reboot—The reboot was caused by a master/subordinate switchover. ·     Auto Update reboot—The reboot was caused by an automatic software upgrade. ·     Memory exhaust reboot—The reboot was caused by a card-memory-exhausted event.

‌

display version-update-record

Use display version-update-record to display startup software image upgrade records.

Syntax

display version-update-record

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

The device records its current startup software version information whenever it starts up, and records all software version update information. Such information can survive reboots.

Examples

# Display the startup software image upgrade records.

Record 1  (updated on Jan 18 2020 at 06:23:54):

 *Name        : comware-cmw710-boot.bin

  Version     : 7.1.070 Test 0001

  Compile time: Jan 25 2020 15:52:43

 

 *Name        : comware-cmw710-system.bin

  Version     : 7.1.070 Test 0001

  Compile time: Jan 25 2020 15:52:43

Table 3 Command output

Field	Description
Record n  (updated on Jan 18 2020 at 06:23:54)	Number of the startup software image upgrade record. Record 1 is the most recent record. The time in parentheses is UTC time.
Name	Software image file name.
*	The software image version changed during the upgrade.

‌

Related commands

reset version-update-record

reset version-update-record

Use reset version-update-record to clear startup software image upgrade records.

Syntax

reset version-update-record

Views

System view

Predefined user roles

network-admin

Examples

# Clear the startup software image upgrade records.

<Sysname> system-view

[Sysname] reset version-update-record

This command will delete all records of version update. Continue? [Y/N]:y

Related commands

display version-update-record