Login
- Table of Contents
-
- 27-WLAN Command Reference (AC)
- 00-Preface
- 01-Compatibility of hardware and AC functionality
- 02-AP management commands
- 03-Radio management commands
- 04-WLAN access commands
- 05-WLAN security commands
- 06-WIPS commands
- 07-WLAN QoS commands
- 08-WLAN roaming commands
- 09-WLAN load balancing commands
- 10-WLAN radio resource measurement commands
- 11-Channel scanning commands
- 12-Band navigation commands
- 13-WLAN high availability commands
- 14-Wireless location commands
- 15-WLAN multicast optimization commands
- 16-User isolation commands
- 17-WLAN probe commands
- 18-Spectrum management commands
- 19-WLAN optimization commands
- 20-WLAN RRM commands
- 21-WLAN IP snooping commands
- 22-WLAN forwarding commands
- 23-WLAN radio load balancing commands
- 24-Client roaming center commands
- Related Documents
-
16-User isolation commands
| Title | Size | Download |
|---|---|---|
| 16-User isolation commands | 34.32 KB |
User isolation commands
user-isolation enable
Use user-isolation enable to enable SSID-based user isolation.
Use undo user-isolation enable to disable SSID-based user isolation.
Syntax
user-isolation enable
undo user-isolation enable
Default
SSID-based user isolation is disabled.
Views
Service template view
Predefined user roles
network-admin
Examples
# Enable SSID-based user isolation.
<Sysname> system-view
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] user-isolation enable
