Contents

Configuring SQA·· 1

About SQA· 1

Restrictions and guidelines: SQA configuration· 1

Enabling SQA for an application· 1

Configuring SQA for audio and video traffic· 1

Configuring statistics collection for endpoint application traffic· 2

SQA configuration examples· 3

Example: Configuring SQA for Tencent Meeting· 3

 

Configuring SQA

About SQA

Service quality analysis (SQA) enables the device to identify SIP- or H.323-based multimedia traffic and preferentially forward this traffic to ensure multimedia service quality. Use this feature to decrease multimedia stuttering and improve user experience.

 

Restrictions and guidelines: SQA configuration

SQA does not support analysis of encrypted SIP or H.323 protocol packets.

Enabling SQA for an application

About this task

After SQA is enabled, the service template bound to the SQA profile will preferentially forward the application traffic of wireless endpoints. The device will also analyze the application traffic, collect and save traffic information and session information. The device can report the analysis data to a control terminal.

Restrictions and guidelines

APR signature libraries of different versions support different applications. You can use the application name ？ command to obtain the list of applications supported by an APR signature library.

You can execute the application name app-name enable command multiple times to enable SQA for multiple applications.

This feature is supported only in wireless local forwarding scenarios.

Procedure

1.     Enter system view.

system-view

2.     Create an SQA profile and enter its view.

sqa profile profile-name

3.     Enable SQA for an application.

application name app-name enable

By default, SQA is disabled for an application.

Configuring SQA for audio and video traffic

About this task

After SQA is enabled, the service template bound to the SQA profile will analyze the audio and video traffic of wireless endpoints. The service template also collects and saves basic information ( such as source and destination IP addresses) and quality information (such as delay and jitter) about the audio and video streams. The device can report the analysis data to a control terminal through NETCONF. For information about NETCONF, see Network Management and Monitoring Configuration Guide.

Procedure

1.     Enter system view.

system-view

2.     Create an SQA profile and enter its view.

sqa profile profile-name

3.     Enable SQA for an audio or video application.

application app-name enable

By default, SQA is disabled for all audio and video applications.

4.     (Optional.) Specify the interval at which analysis data for audio and video applications is collected and sent.

application interval interval

The default setting is 300 seconds.

5.     Return to system view.

quit

6.     Enter service template view.

wlan service-template service-template

7.     Bind an SQA profile to the service template.

sqa-profile profile-name

By default, no SQA profile is bound to a service template.

Configuring statistics collection for endpoint application traffic

About this task

After this feature is enabled, the service template bound to the SQA profile will collect traffic statistics on identifiable applications for wireless endpoints. The device can report the statistics to a control terminal through NETCONF. For information about NETCONF, see Network Management and Monitoring Configuration Guide.

Procedure

1.     Enter system view.

system-view

2.     Create an SQA profile and enter its view.

sqa profile profile-name

3.     Enable statistics collection for endpoint application traffic.

application statistics enable

By default, statistics collection for endpoint application traffic is disabled

4.     (Optional.) Specify the interval at which traffic statistics are collected and sent.

application statistics interval interval

The default setting is 5 minutes.

5.     Return to system view.

quit

6.     Enter service template view.

wlan service-template service-template

7.     Bind an SQA profile to the service template.

sqa-profile profile-name

By default, no SQA profile is bound to a service template.

SQA configuration examples

Example: Configuring SQA for Tencent Meeting

Network configuration

As shown in Figure 1, the wireless network uses the local forwarding mode. Client 1 and client 2 access the corporate network through service templates.

Configure SQA to analyze the audio and video traffic of endpoints.

Figure 1 Network diagram

‌

Prerequisites

Assign IP addresses to interfaces, and make sure the devices can reach each other.

Make sure the AP can work correctly on the AC and clients can obtain IP addresses.

Procedure

# Create an SQA profile, and enable SQA for Tencent Meeting.

<AC> system-view

[AC] sqa profile 1

[AC-sqa-profile-1] application tencentmeeting enable

[AC-sqa-profile-1] quit

# Bind an SQA profile to service template service1.

[AC] wlan service-template service1

[AC-wlan-st-service1] sqa-profile 1

# Configure APs to forward client data traffic from all VLANs.

[AC-wlan-st-service1] client forwarding-location ap

[AC-wlan-st-service1] quit

# Bind the SQA profile to service template service2.

[AC] wlan service-template service2

[AC-wlan-st-service2] sqa-profile 1

# Configure APs to forward client data traffic from all VLANs.

[AC-wlan-st-service2] client forwarding-location ap

[AC-wlan-st-service2] quit

Verifying the configuration

# Log in to the cloud platform, and view the quality information of audio and video traffic.