(1) CF card	(2) CF card LED. For the LED description, see Table2-1.
(3) USB 2.0 port	(4) Management Ethernet port LED. For the LED description, see Table2-2.
(5) Console port	(6) Service module status LEDs. For the LED description, see Table2-5.
(7) MPU active/standby LED. For the LED description, see Table2-7.	(8) Management Ethernet port (10/100/1000Base-T)
(9) Power supply status LEDs. For the LED description, see Table2-4.	(10) Fan tray status LEDs. For the LED description, see Table2-3.
(11) MPU status LED. For the LED description, see Table2-6.	(12) System reset button

LEDs

Table2-1 CF card LED description

LED	Status	Description
CF card LED	Steady green	The CF card is present and idle. Do not hot swap it.
	Flashing green	The CF card is present and the system is reading/writing the card. Do not hot swap it.
	Off	The CF card is not present, or the CF card is offline. You can hot swap it.

Table2-2 Management Ethernet port LED description

LED mark	Status	Description
LINK/ACT	Flashing green	The port is in sending or receiving data.
	Steady green	A link is present on the port.
	Off	No link is present on the port.

Table2-3 Fan tray status LED description

LED status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	The fan tray is operating correctly.
Off	Steady on	One or multiple fans in the fan tray are faulty or the fan tray is not present.
Off	Off	The router is not powered on.

Table2-4 Power supply status LED description

LED status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	All power supplies in the chassis are operating correctly.
Off	Steady on	A power supply in the chassis does not have power output. Possible reasons include: · The power supply is faulty. · The power supply is not switched on. · Power cord connection failure. · Power outage of the external power supply system.
Off	Off	· No power supplies are present in the chassis. · No power supply in the chassis has power output. Possible reasons include: ¡ The power supplies are faulty. ¡ The power supplies are not switched on. ¡ Power cord connection failure. ¡ Power outage of the external power supply system.

Table2-5 Service module status LED

LED status		Description
RUN (green)	ALM (red)	Description
Flashing	Off	The service modules are operating correctly.
Fast flashing	Steady on	One or two service modules are loading software. If the service modules remain in this state, the current software version of the service modules is not compatible with that of the device.
Steady on	Steady on	One or two service modules are starting up or are faulty.
Off	Off	No service modules are present.

Table2-6 MPU status LED description

LED mark	Status	Description
RUN	Flashing green	The MPU is operating correctly.
	Fast flashing green	The MPU is loading software. If the MPU remains in this state, the current software version of the MPU is not compatible with that of the device.
	Steady on	The MPU is initiating the booting process or the MPU is faulty.

Table2-7 MPU active/standby LED description

LED mark	LEDs	Description
ACTIVE	Steady green	The MPU is in active state.
Off	· The MPU is in standby state. · The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

LED mark

LEDs

Description

ACTIVE

Steady green

The MPU is in active state.

Off

· The MPU is in standby state.

· The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

Ports

Console port

The console port can be connected to a computer for system debugging, configuration, maintenance, management, and host software loading.

Table2-8 Console port specifications

Item	Description
Connector type	RJ-45
Compliant standard	Asynchronous EIA/TIA-232
Transmission baud rate	≤ 115200 bps. The default value is 9600 bps.
Transmission medium and max transmission distance	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Services	Connects to the serial port on a local PC running a terminal emulation program.

Management Ethernet port

Connects to a computer for router program loading and router debugging, or connects to a remote NMS for remote management.

Table2-9 Management Ethernet port specifications

Item	Description
Connector type	RJ-45
Port quantity	1
Transmission baud rate	10/100/1000 Mbps
Transmission medium and max transmission distance	Category-5 or above twisted pair cable, with a transmission distance of 100m (328.1 ft)
Services	For router software upgrade and network management

USB port

USB ports can connect multiple types of devices and provide a higher data transfer rate than common parallel interfaces and serial interfaces. A device can be hot swapped on a USB port and can plug and play when connected to a USB port.

Table2-10 USB port specifications

Item	Description
Connector type	USB A
Compliant standard	USB 2.0
Services	External storage media

NOTE:

The USB port does not support an extension cable.

CF card slot

A CF card is a mobile storage device that features fast speed, large capacity, small size, light weight, and low power consumption.

Table2-11 External CF card specifications

Item	Description
CF card slots	1
CF card capacity	4 GB
Services	You can use a CF card to store logs, application program files, and configuration files.

Technical specifications

Table2-12 Technical specifications

Item	Description
Dimensions (H × W × D)	45 ×199 × 352 mm (1.77 × 7.83 × 13.86 in)
Weight	1.40 kg (3.09 lb)
Maximum power consumption	35 W
Typical power consumption	32 W
Minimum power consumption	28 W
Operating temperature	0°C to 45°C (32°F to 113°F)
SDRAM	4 GB

CSR07SRPUA1

View

Figure2-2 CSR07SRPUA1 view

(1) Console port	(2) Management Ethernet ports (10/100/1000Base-T)
(3) USB 2.0 port	(4) MCC 10GE port (dedicated for IRF connection, SFP+ transceiver module supported)
(5) System reset button	(6) Management Ethernet port LED (ACT). For the LED description, see Table2-13.
(7) Management Ethernet port LED (LINK). For the LED description, see Table2-13.	(8) Power supply status LED. For the LED description, see Table2-16.
(9) Fan tray status LED. For the LED description, see Table2-15.	(10) Card status LEDs. For the LED description, see Table2-17.
(11) MCC 10GE port LED. For the LED description, see Table2-14.	(12) MPU active/standby LED. For the LED description, see Table2-18.

LEDs

Table2-13 Management Ethernet port LED description

LED status		Description
LINK (green)	ACT (yellow)	Description
Steady on	Flashing	The port is in sending or receiving data.
Steady on	Off	A link is present on the port.
Off	Off	No link is present on the port.

Table2-14 MCC 10GE port LED description

LED mark	Status	Description
LINK/ACT	Flashing green	The MCC 10GE port is sending or receiving data.
	Steady green	A link is present on the MCC 10GE port.
	Off	No link is present on the MCC 10GE port.

Table2-15 Fan tray status LED description

LED mark	Status	Description
OK/FAIL	Steady green	The fan tray is operating correctly.
	Steady red	One or more fans in the fan tray are faulty or the fan tray is not present.
	Off	The router is not powered on.

Table2-16 Power supply status LED description

LED mark	Status	Description
OK/FAIL	Steady green	All power supplies in the chassis are operating correctly.
	Steady red	A power supply in the chassis does not have power output. Possible reasons include: · The power supply is faulty. · The power supply is not switched on. · Power cord connection failure. · Power outage of the external power supply system.
	Off	· No power supplies are present in the chassis. · No power supply in the chassis has power output. Possible reasons include: ¡ The power supplies are faulty. ¡ The power supplies are not switched on. ¡ Power cord connection failure. ¡ Power outage of the external power supply system.

Table2-17 Card status LED description

LED status		Description
RUN (green)	ALM (red)	Description
Flashing	Off	The card in the corresponding slot is operating correctly.
Fast flashing	Steady on	The card in the corresponding slot is loading software. If the card keeps in this state, the current software version of the card is not compatible with that of the device.
Steady on	Steady on	The card in the corresponding slot is starting up or is faulty.
Steady on	Off	The MPU in the corresponding slot is initiating the boot process.
Off	Off	No card is available in the corresponding slot.

NOTE:

The ALM LED being on for a while at the system startup does not mean that the card is faulty.

Table2-18 MPU active/standby LED description

LED mark	LEDs	Description
ACTIVE	Steady green	The MPU is in active state.
Off	· The MPU is in standby state. · The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

LED mark

LEDs

Description

ACTIVE

Steady green

The MPU is in active state.

Off

· The MPU is in standby state.

· The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

Ports

Console port

The console port can be connected to a computer for system debugging, configuration, maintenance, management, and host software loading.

Table2-19 Console port specifications

Item	Description
Connector type	RJ-45
Compliant standard	Asynchronous EIA/TIA-232
Transmission baud rate	≤ 115200 bps. The default value is 9600 bps.
Transmission medium and max transmission distance	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Services	Connects to the serial port on a local PC running a terminal emulation program.

Management Ethernet port

Connects to a computer for router program loading and router debugging, or connects to a remote NMS for remote management.

Table2-20 Management Ethernet port specifications

Item	Description
Connector type	RJ-45
Port quantity	1
Transmission baud rate	10/100/1000 Mbps
Transmission medium and max transmission distance	Category-5 or above twisted pair cable, with a transmission distance of 100m (328.1 ft)
Services	For router software upgrade and network management

USB port

Table2-21 USB port specifications

Item	Description
Connector type	USB A
Compliant standard	USB 2.0
Services	External storage media

NOTE:

The USB port does not support an extension cable.

MCC 10GE ports

Table2-22 MCC 10GE port specifications

Item	Description
Connector type	LC
Compliant standard	10GBASE-R
Transmission rate	10.3125 Gbps
Available transceiver modules	For transceiver modules available for the port, see Table2-23.
Services	Dedicated for IRF connection between devices

Table2-23 SFP+ transceiver module specifications available for the MCC 10GE port

Model	Central wavelength (nm)	Transmission distance	Data rate (Gbps)	Fiber mode	Fiber diameter (µm)	Transmit power (dBM)	Receive power (dBM)
SFP-XG-SX-MM850-A	850	33 m (108.27 ft)	10.31	MMF	62.5/125	–7.3 to –1	–7 to –1
SFP-XG-SX-MM850-A	850	300 m (984.25 ft)		MMF	50/125	–7.3 to –1	–7 to –1
SFP-XG-LX-SM1310	1310	10 km (6.21 miles)		SMF	9/125	–8.2 to +0.5	–12.6 to –0.5

Technical specifications

Table2-24 Technical specifications

Item	Description
Dimensions (H × W × D)	46 × 399 × 352 mm (1.81 × 15.71 × 13.86 in)
Weight	4.35 kg (9.59 lb)
Maximum power consumption	75 W
Typical power consumption	67 W
Minimum power consumption	49 W
Operating temperature	0°C to 45°C (32°F to 113°F)
SDRAM	4 GB or 8 GB

CSR07SRPUB1

View

Figure2-3 CSR07SRPUB1 view

(1) CF card	(2) CF card LED. For the LED description, see Table2-25.
(3) Console port	(4) Management Ethernet ports (10/100/1000Base-T)
(5) Management Ethernet port LED. For the LED description, see Table2-26.	(6) MCC 10GE ports (dedicated for IRF connection, SFP+ transceiver module supported)
(7) USB 2.0 port	(8) System reset button
(9) MCC 10 GE port LED. For the LED description, see Table2-27.	(10) Fan tray status LEDs. For the LED description, see Table2-28.
(11) Power supply status LEDs. For the LED description, see Table2-29.	(12) Card status LEDs. For the LED description, see Table2-30.
(13) MPU active/standby LED. For the LED description, see Table2-31.

LEDs

Table2-25 CF card LED description

LED	Status	Description
CF card LED	Steady green	The CF card is present and idle. Do not hot swap it.
	Flashing green	The CF card is present and the system is reading/writing the card. Do not hot swap it.
	Off	The CF card is not present, or the CF card is offline. You can hot swap it.

Table2-26 Management Ethernet port LED description

LED status		Description
LINK (green)	ACT (yellow)	Description
Steady on	Flashing	The port is in sending or receiving data.
Steady on	Off	A link is present on the port.
Off	Off	No link is present on the port.

Table2-27 MCC 10GE port LED description

LED mark	Status	Description
LINK/ACT	Flashing green	The MCC 10GE port is sending or receiving data.
	Steady green	A link is present on the MCC 10GE port.
	Off	No link is present on the MCC 10GE port.

Table2-28 Fan tray status LED description

Status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	The fan tray is operating correctly.
Off	Steady on	One or multiple fans in the fan tray are faulty or the fan tray is not present.
Off	Off	The router is not powered on.

Table2-29 Power supply status LED description

Status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	All power supplies in the chassis are operating correctly.
Off	Steady on	A power supply in the chassis does not have power output. Possible reasons include: · The power supply is faulty. · The power supply is not switched on. · Power cord connection failure. · Power outage of the external power supply system.
Off	Off	· No power supplies are present in the chassis. · No power supply in the chassis has power output. Possible reasons include: ¡ The power supplies are faulty. ¡ The power supplies are not switched on. ¡ Power cord connection failure. ¡ Power outage of the external power supply system.

Table2-30 Card status LED description

Status		Description
RUN (green)	ALM (red)	Description
Flashing	Off	The card in the corresponding slot is operating correctly.
Fast flashing	Steady on	The card in the corresponding slot is loading software. If the card keeps in this state, the current software version of the card is not compatible with that of the device.
Steady on	Steady on	The card in the corresponding slot is starting or faulty.
Steady on	Off	The MPU in the corresponding slot is initiating the boot process.
Off	Off	No card is available in the corresponding slot.

NOTE:

The ALM LED being on for a while at the system startup does not mean that the card is faulty.

Table2-31 MPU active/standby LED description

LED mark	LEDs	Description
ACTIVE	Steady green	The MPU is in active state.
Off	· The MPU is in standby state. · The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

LED mark

LEDs

Description

ACTIVE

Steady green

The MPU is in active state.

Off

· The MPU is in standby state.

· The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

Ports

Console port

The console port can be connected to a computer for system debugging, configuration, maintenance, management, and host software loading.

Table2-32 Console port specifications

Item	Description
Connector type	RJ-45
Compliant standard	Asynchronous EIA/TIA-232
Transmission baud rate	≤ 115200 bps. The default value is 9600 bps.
Transmission medium and max transmission distance	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Services	Connects to the serial port on a local PC running a terminal emulation program.

Management Ethernet port

Connects to a computer for router program loading and router debugging, or connects to a remote NMS for remote management.

Table2-33 Management Ethernet port specifications

Item	Description
Connector type	RJ-45
Port quantity	1
Transmission baud rate	10/100/1000 Mbps
Transmission medium and max transmission distance	Category-5 or above twisted pair cable, with a transmission distance of 100m (328.1 ft)
Services	For router software upgrade and network management

USB port

Table2-34 USB port specifications

Item	Description
Connector type	USB A
Compliant standard	USB 2.0
Services	External storage media

NOTE:

The USB port does not support an extension cable.

CF card slot

A CF card is a mobile storage device that features fast speed, large capacity, small size, light weight, and low power consumption.

Table2-35 External CF card specifications

Item	Description
CF card slots	1
CF card capacity	4 GB
Services	You can use a CF card to store logs, application program files, and configuration files.

NOTE:

Before you use a CF card, insert the CF card into the card slot and fasten the card cover.

MCC 10GE ports

Table2-36 MCC 10GE port specifications

Item	Description
Connector type	LC
Compliant standard	10GBASE-R
Transmission rate	10.3125 Gbps
Available transceiver modules	For transceiver modules available for the port, see Table2-23.
Services	Dedicated for IRF connection between devices

Table2-37 SFP+ transceiver module specifications

Model	Central wavelength (nm)	Transmission distance	Data rate (Gbps)	Fiber mode	Fiber diameter (µm)	Transmit power (dBM)	Receive power (dBM)
SFP-XG-SX-MM850-A	850	33 m (108.27 ft)	10.31	MMF	62.5/125	–7.3 to –1	–7 to –1
SFP-XG-SX-MM850-A	850	300 m (984.25 ft)			50/125	–7.3 to –1	–7 to –1
SFP-XG-LX220-MM1310	1310	220 m (721.78 ft)			62.5/125	–6.5 to +0.5	–6.5 to +1.5
SFP-XG-LX220-MM1310	1310	220 m (721.78 ft)			50/125	–6.5 to +0.5	–6.5 to +1.5
SFP-XG-LX-SM1310	1310	10 km (6.21 miles)		SMF	9/125	–8.2 to +0.5	–12.6 to –0.5

Technical specifications

Table2-38 Technical specifications

Item	Description
Dimensions (H × W × D)	46 × 399 × 352 mm (1.81 × 15.71 × 13.86 in)
Weight	3.40 kg (10.36 lb)
Maximum power consumption	60 W
Typical power consumption	54 W
Minimum power consumption	44 W
Operating temperature	0°C to 45°C (32°F to 113°F)
SDRAM	4 GB

CSR07SRPUC1

View

Figure2-4 CSR07SRPUC1 view

(1) CF card	(2) CF card LED. For the LED description, see Table2-39.
(3) Console port	(4) Management Ethernet port (10/100/1000Base-T)
(5) Management Ethernet port LED. For the LED description, see Table2-40.	(6) USB 2.0 port
(7) MPU active/standby LED. For the LED description, see Table2-44.	(8) System reset button
(9) Fan tray status LE. For the LED description, see Table2-41.	(10) Power supply status LE. For the LED description, see Table2-42.
(11) Card status LE. For the LED description, see Table2-43.

LEDs

CF card LED

Table2-39 CF card LED description

LED	Status		Description
CF card LED	Steady green		The CF card is present and idle. Do not hot swap it.
	Flashing green		The CF card is present and the system is reading/writing the card. Do not hot swap it.
	Off		The CF card is not present, or the CF card is offline. You can hot swap it.
LED		Status		Description
CF card LED		Steady green		The CF card is present and idle. Do not hot swap it.
		Flashing green		The CF card is present and the system is reading/writing the card. Do not hot swap it.
		Off		The CF card is not present, or the CF card is offline. You can hot swap it.

Table2-40 Management Ethernet port LED description

Status		Description
LINK (green)	ACT (yellow)	Description
Steady on	Flashing	The port is in sending or receiving data.
Steady on	Off	A link is present on the port.
Off	Off	No link is present on the port.

Table2-41 Fan tray status LED description

Status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	The fan tray is operating correctly.
Off	Steady on	One or multiple fans in the fan tray are faulty or the fan tray is not present.
Off	Off	The router is not powered on.

Table2-42 Power supply status LED description

Status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	All power supplies in the chassis are operating correctly.
Off	Steady on	A power supply in the chassis does not have power output. Possible reasons include: · The power supply is faulty. · The power supply is not switched on. · Power cord connection failure. · Power outage of the external power supply system.
Off	Off	· No power supplies are present in the chassis. · No power supply in the chassis has power output. Possible reasons include: ¡ The power supplies are faulty. ¡ The power supplies are not switched on. ¡ Power cord connection failure. ¡ Power outage of the external power supply system.

Table2-43 Card status LED description

LED status		Description
RUN (green)	ALM (red)	Description
Flashing	Off	The card in the corresponding slot is operating correctly.
Fast flashing	Steady on	The card in the corresponding slot is loading software. If the card keeps in this state, the software version of the card is not compatible with that of the device.
Steady on	Steady on	The card in the corresponding slot is starting or faulty.
Steady on	Off	The MPU in the corresponding slot is initiating the boot process.
Off	Off	No card is available in the corresponding slot.

NOTE:

The ALM LED being on for a while at the system startup does not mean that the card is faulty.

Table2-44 MPU active/standby LED description

LED mark

LEDs

Description

ACTIVE

Steady green

The MPU is in active state.

Off

· The MPU is in standby state.

· The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

Ports

Console port

The console port can be connected to a computer for system debugging, configuration, maintenance, management, and host software loading.

Table2-45 Console port specifications

Item	Description
Connector type	RJ-45
Compliant standard	Asynchronous EIA/TIA-232
Transmission baud rate	≤ 115200 bps. The default value is 9600 bps.
Transmission medium and max transmission distance	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Services	Connects to the serial port on a local PC running a terminal emulation program.

Management Ethernet port

The management Ethernet port connects to a computer for router program loading and router debugging, or connects to a remote NMS for remote management.

Table2-46 Management Ethernet port specifications

Item	Description
Connector type	RJ-45
Port quantity	1
Transmission baud rate	10/100/1000 Mbps
Transmission medium and max transmission distance	Category-5 or above twisted pair cable, with a transmission distance of 100m (328.1 ft)
Services	For router software upgrade and network management

USB port

Table2-47 USB port specifications

Item	Description
Connector type	USB A
Compliant standard	USB 2.0
Services	External storage media

NOTE:

The USB port does not support an extension cable.

CF card slot

A CF card is a mobile storage device that features fast speed, large capacity, small size, light weight, and low power consumption.

Table2-48 External CF card specifications

Item	Description
CF card slots	1
CF card capacity	4 GB
Services	You can use a CF card to store logs, application program files, and configuration files.

NOTE:

Before you use a CF card, insert the CF card into the card slot and fasten the card cover.

Technical specifications

Table2-49 Technical specifications

Item	Description
Dimensions (H × W × D)	46 × 399 × 352 mm (1.81 × 15.71 × 13.86 in)
Weight	3.30 kg (7.27 lb lb)
Maximum power consumption	45 W
Typical power consumption	40 W
Minimum power consumption	30 W
Operating temperature	0°C to 45°C (32°F to 113°F)
SDRAM	4 GB

CSR07SRPUD3

View

Figure2-5 CSR07SRPUD3 view

(1) CF card	(2) CF card LED. For the LED description, see Table2-50.
(3) Console port	(4) Management Ethernet ports (10/100/1000Base-T)
(5) Management Ethernet port LED. For the LED description, see Table2-51.	(6) MCC 10GE ports (dedicated for IRF connection, SFP+ transceiver module supported)
(7) USB 2.0 port	(8) System reset button
(9) High-precision time synchronization ports (Both are input ports by default. When both ports are input ports, only port 1 takes effect.)	(10) SMB coaxial clock ports (2 input ports and 2 output ports)
(11) MCC 10 GE port LED. For the LED description, see Table2-52.	(12) Fan tray status LEDs. For the LED description, see Table2-53.
(13) Power supply status LEDs. For the LED description, see Table2-54.	(14) Card status LEDs. For the LED description, see Table2-55.
(15) MPU active/standby LED. For the LED description, see Table2-56.

LEDs

Table2-50 CF card LED description

LED	Status	Description
CF card LED	Steady green	The CF card is present and idle. Do not hot swap it.
	Flashing green	The CF card is present and the system is reading/writing the card. Do not hot swap it.
	Off	The CF card is not present, or the CF card is offline. You can hot swap it.

Table2-51 Management Ethernet port LED description

LED status		Description
LINK (green)	ACT (yellow)	Description
Steady on	Flashing	The port is in sending or receiving data.
Steady on	Off	A link is present on the port.
Off	Off	No link is present on the port.

Table2-52 MCC 10GE port LED description

LED mark	Status	Description
LINK/ACT	Flashing green	The MCC 10GE port is sending or receiving data.
	Steady green	A link is present on the MCC 10GE port.
	Off	No link is present on the MCC 10GE port.

Table2-53 Fan tray status LED description

LED status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	The fan tray is operating correctly.
Off	Steady on	One or multiple fans in the fan tray are faulty or the fan tray is not present.
Off	Off	The router is not powered on.

Table2-54 Power supply status LED description

LED status		Description
OK (green)	FAIL (red)	Description
Steady on	Off	All power supplies in the chassis are operating correctly.
Off	Steady on	A power supply in the chassis does not have power output. Possible reasons include: · The power supply is faulty. · The power supply is not switched on. · Power cord connection failure. · Power outage of the external power supply system.
Off	Off	· No power supplies are present in the chassis. · No power supply in the chassis has power output. Possible reasons include: ¡ The power supplies are faulty. ¡ The power supplies are not switched on. ¡ Power cord connection failure. ¡ Power outage of the external power supply system.

Table2-55 Card status LED description

Status		Description
RUN (green)	ALM (red)	Description
Flashing	Off	The card in the corresponding slot is operating correctly.
Fast flashing	Steady on	The card in the corresponding slot is loading software. If the card keeps in this state, the software version of the card is not compatible with that of the device.
Steady on	Steady on	The card in the corresponding slot is starting or faulty.
Steady on	Off	The MPU in the corresponding slot is initiating the boot process.
Off	Off	No card is available in the corresponding slot.

NOTE:

The ALM LED being on for a while at the system startup does not mean that the card is faulty.

Table2-56 MPU active/standby LED description

LED mark

LEDs

Description

ACTIVE

Steady green

The MPU is in active state.

Off

· The MPU is in standby state.

· The MPU is faulty. To identify the failure, see the card status LED description for the MPU.

Ports

Console port

The console port can be connected to a computer for system debugging, configuration, maintenance, management, and host software loading.

Table2-57 Console port specifications

Item	Description
Connector type	RJ-45
Compliant standard	Asynchronous EIA/TIA-232
Transmission baud rate	≤ 115200 bps. The default value is 9600 bps.
Transmission medium and max transmission distance	Common asynchronous serial interface cable, with a maximum transmission distance of 15 m (49.21 ft)
Services	Connects to the serial port on a local PC running a terminal emulation program.

Management Ethernet port

Connects to a computer for router program loading and router debugging, or connects to a remote NMS for remote management.

Table2-58 Management Ethernet port specifications

Item	Description
Connector type	RJ-45
Port quantity	1
Transmission baud rate	10/100/1000 Mbps
Transmission medium and max transmission distance	Category-5 or above twisted pair cable, with a transmission distance of 100m (328.1 ft)
Services	For router software upgrade and network management

USB port

Table2-59 USB port specifications

Item	Description
Connector type	USB A
Compliant standard	USB 2.0
Services	External storage media

NOTE:

The USB port does not support an extension cable.

CF card slot

A CF card is a mobile storage device that features fast speed, large capacity, small size, light weight, and low power consumption.

Table2-60 External CF card specifications

Item	Description
CF card slots	1
CF card capacity	4 GB
Services	You can use a CF card to store logs, application program files, and configuration files.

NOTE:

Before you use a CF card, insert the CF card into the card slot and fasten the card cover.

MCC 10GE ports

Table2-61 MCC 10GE port specifications

Item	Description
Connector type	LC
Compliant standard	10GBASE-R
Transmission rate	10.3125 Gbps
Available transceiver modules	For transceiver modules available for the port, see Table2-23.
Services	Dedicated for IRF connection between devices

Table2-62 SFP+ transceiver module specifications

Model	Central wavelength (nm)	Transmission distance	Data rate (Gbps)	Fiber mode	Fiber diameter (µm)	Transmit power (dBM)	Receive power (dBM)
SFP-XG-SX-MM850-A	850	33 m (108.27 ft)	10.31	MMF	62.5/125	–7.3 to –1	–7 to –1
SFP-XG-SX-MM850-A	850	300 m (984.25 ft)			50/125	–7.3 to –1	–7 to –1
SFP-XG-LX220-MM1310	1310	220 m (721.78 ft)			62.5/125	–6.5 to +0.5	–6.5 to +1.5
SFP-XG-LX220-MM1310	1310	220 m (721.78 ft)			50/125	–6.5 to +0.5	–6.5 to +1.5
SFP-XG-LX-SM1310	1310	10 km (6.21 miles)		SMF	9/125	–8.2 to +0.5	–12.6 to –0.5

SMB coaxial clock input/output port

SMB coaxial clock ports provide input or output clock references at 2.048 Mbps (2.048 MHz). You can set the data rate mode or frequency mode through the CLI. Two of them are input ports and two are output ports.

Table2-63 SMB coaxial clock input/output port specifications

Item	Description
Connector type	SMB coaxial
Compliant standard	GJB681
Transmission baud rate	2.048 Mbps
Transmission medium	75-ohm coaxial cable
Services	Sends and receives 2.048 MHz clocks and 2.048 Mbps signals to synchronize the clocks of the router and other devices, such as routers and the terminals.

High-precision time synchronization port

Table2-64 High-precision time synchronization port specifications

Item	Description
Connector type	RJ-45
Compliant standard	QB-B-016-2010
Transmission baud rate	9600 bps
Transmission medium	Category-5 or above twisted pair cable
Services	You can configure the port as an input port or output port at the CLI. Synchronizes the clocks of the router and other devices, such as GPS receivers and terminals.

Technical specifications

Table2-65 Technical specifications

Item	Description
Dimensions (H × W × D)	46 × 399 × 352 mm (1.81 × 15.71 × 13.86 in)
Weight	4.15 kg (9.15 lb)
Maximum power consumption	110 W
Typical power consumption	99 W
Minimum power consumption	80 W
Operating temperature	0°C to 45°C (32°F to 113°F)
SDRAM	8 GB or 16 GB

Compatibility information

For the MPUs supported by each router model, see Table2-66.

The router supports dual MPUs. To install two MPUs are the router, make sure they are the same model.

Table2-66 Compatibility matrix between MPUs and routers

MPU model	SR8803-F	SR8805-F	SR8808-F	SR8812-F
CSR07MPUA1	Supported	Not supported	Not supported	Not supported
CSR07SRPUA1	Not supported	Supported	Supported	Supported
CSR07SRPUB1	Not supported	Supported	Supported	Supported
CSR07SRPUC1	Not supported	Supported	Not supported	Not supported
CSR07SRPUD3	Not supported	Supported	Supported	Supported

SPC/CSPC LPUs (interface modules)

The router supports various types of interface modules, each of which provides a different number and type of interfaces.

CAUTION:

· The SR8805-F router installed with the CSR07SRPUC1 MPU and SR8803-F router do not support the CSPC-CP2LB interface module.

· To install a CSPC-CP2LB interface module on an SR8812-F router, you can install it only in slot 0, 4, or 7.

CSPC-CP2LB

View

Figure2-6 CSPC-CP2LB view

(1) 100GBASE-R-CFP fiber ports (2 in total)	(2) CFP port LED. For the LED description, see Table2-67.

LEDs

Table2-67 CFP port LED description

LED	Status	Description
CFP port LED	Flashing	The CFP port is sending or receiving data.
	Steady on	A link is present on the CFP port.
	Off	No link is present on the CFP port.

Ports

Table2-68 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-CP2LB	2-port 100GBASE Ethernet optical interface module	LC	2	100 Gbps

Technical specifications

Table2-69 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	4.06 kg (8.95 lb)
Maximum power consumption	197 W
Typical power consumption	178 W
Minimum power consumption	150 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GE16XP4L-E

View

Figure2-7 CSPC-GE16XP4L-E view

(1) 10GBASE-R-SFP+ fiber ports (4 in total) (10GE SFP+ modules supported)	(2) Combo interfaces (16 in total) (GE SFP modules supported in 1000BASE-X-SFP fiber ports)
(3) SFP port LED. For the LED description, see Table2-71.	(4) RJ-45 Ethernet Interface LED. For the LED description, see Table2-70.
(5) SFP+ port LED. For the LED description, see Table2-72.

LEDs

Table2-70 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

Table2-71 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the SFP port.
	Off	No link is present on the port.

Table2-72 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

You can identify the rate of an SFP+ port by observing the color of its LED. When the LED is green, the SFP+ port is operating at 10 Gbps. When the LED is yellow, the SFP+ port is operating at 1000 Mbps.

Ports

Table2-73 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GE16XP4L-E	16-port 1000BASE-X Ethernet combo interface + 4-port 10GBASE-R/W Ethernet optical interface line processing unit	RJ-45	16	10/100/1000 Mbps
		LC	16	1000 Mbps
		LC	4	10 Gbps

Technical specifications

Table2-74 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	4.35 kg (9.59 lb)
Maximum power consumption	127 W
Typical power consumption	114 W
Minimum power consumption	107 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GE24L-E

View

Figure2-8 CSPC-GE24L-E view

(1) Combo interfaces (24 in total) (GE SFP modules supported in 1000BASE-X-SFP fiber ports)	(2) SFP port LED. For the LED description, see Table2-76.
(3) RJ-45 Ethernet Interface LED. For the LED description, see Table2-75.

Status

Table2-75 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	On	A link is present on the port.
	Off	No link is present on the port.

Table2-76 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	On	A link is present on the SFP port.
	Off	No link is present on the port.

Ports

Table2-77 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GE24L-E	24-port 1000BASE-X Ethernet combo interface line processing unit	RJ-45	24	10/100/1000 Mbps
		LC	24	100 Mbps
		LC	24	1000 Mbps

Technical specifications

Table2-78 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	4.45 kg (9.81 lb)
Maximum power consumption	114 W
Typical power consumption	110 W
Minimum power consumption	108 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GP24GE8XP2L-E

View

Figure2-9 CSPC-GP24GE8XP2L-E view

(1) 10GBASE-R-SFP+ fiber ports (2 in total) (10GE SFP+ modules supported)	(2) 1000BASE-X-SFP fiber ports (24 in total, GE SFP modules supported)
(3) Combo interfaces (8 in total) (GE SFP modules supported in 1000BASE-X-SFP fiber ports)	(4) RJ-45 Ethernet Interface LED. For the LED description, see Table2-79.
(5) SFP port LED. For the LED description, see Table2-80.	(6) SFP+ port LED. For the LED description, see Table2-81.

LEDs

Table2-79 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	On	A link is present on the port.
	Off	No link is present on the port.

Table2-80 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	On	A link is present on the SFP port.
	Off	No link is present on the port.

Table2-81 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	On	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-82 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GP24GE8XP2L-E	24-port 1000BASE-X Ethernet optical interface + 8-port 1000BASE-X Ethernet combo interface + 2-port 10GBASE-R/W Ethernet optical interface line processing unit	RJ-45	8	10/100/1000 Mbps
		LC	32	1000 Mbps
		LC	2	10 Gbps

Technical specifications

Table2-83 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	4.45 kg (9.81 lb)
Maximum power consumption	126 W
Typical power consumption	113 W
Minimum power consumption	101 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GP24LA1

View

Figure2-10 CSPC-GP24LA1 view

(1) 1000BASE-X-SFP fiber ports (16 in total)	(2) Combo interfaces (8 in total)
(3) SFP port LED. For the LED description, see Table2-85.	(4) RJ-45 Ethernet port LED. For the LED description, see Table2-84.

NOTE:

· A combo interface is a logical interface that contains an SFP fiber port and an RJ-45 copper port. The two ports share one forwarding channel. As a result, they cannot work simultaneously. When you activate one port, the other port is automatically disabled. You can activate the fiber or copper port as needed. By default, the copper port is activated.

· Use a category 5 or above twisted pair cable to connect a 1000BASE-T RJ-45 copper port. The maximum transmission distance is 100 m (328.08 ft).

Status

Table2-84 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

Table2-85 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the SFP port.
	Off	No link is present on the port.

Ports

Table2-86 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GP24LA1	16-port 1000BASE-X Ethernet optical interface + 8-port combo interface module	RJ-45	8	10/100/1000 Mbps
		LC	24	155 Mbps
				1000 Mbps
				10/100/1000 Mbps

Technical specifications

Table2-87 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.01 kg (6.64 lb)
Maximum power consumption	75 W
Typical power consumption	68 W
Minimum power consumption	47 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GP24XP2LB

View

Figure2-11 CSPC-GP24XP2LB view

(1) 1000BASE-X-SFP fiber ports (16 in total)	(2) Combo interfaces (8 in total)
(3) 10GBASE-R-XFP fiber ports (2 in total)	(4) SFP port LED. For the LED description, see Table2-89.
(5) RJ-45 Ethernet port LED. For the LED description, see Table2-88.	(6) XFP port LED. For the LED description, see Table2-90.

LEDs

Table2-88 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

Table2-89 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the SFP port.
	Off	No link is present on the port.

Table2-90 XFP port LED description

XFP port LED status		Description
LINK	ACT	Description
Steady on	Flashing	A link is present, and the port is sending or receiving data.
Steady on	Off	A link is present, but the port is not sending or receiving data.
Off	Off	No link is present on the XFP port.

Ports

Table2-91 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GP24XP2LB	16-port 1000BASE-X optical interface + 8-port combo interface + 2-port 10GE optical interface module	RJ-45	8	10/100/1000 Mbps
		LC	24	155 Mbps
		LC	24	1000 Mbps

Technical specifications

Table2-92 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.08 kg (6.79 lb)
Maximum power consumption	100 W
Typical power consumption	90 W
Minimum power consumption	51 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GP48LB

View

Figure2-12 CSPC-GP48LB view

(1) 1000BASE-X-SFP fiber ports (48 in total)	(2) SFP port LED. For the LED description, see Table2-93.

LEDs

Table2-93 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the SFP port.
	Off	No link is present on the port.

Ports

Table2-94 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GP48LB	48-port enhanced 1000BASE-X Ethernet optical interface module	LC	48	100 Mbps
				155 Mbps
				1000 Mbps
				10/100/1000 Mbps
				10/100/1000 Mbps
			2	10 Gbps

Technical specifications

Table2-95 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.25 kg (7.17 lb)
Maximum power consumption	110 W
Typical power consumption	99 W
Minimum power consumption	43 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-GT48LA1

View

Figure2-13 CSPC-GT48LA1 view

(1) 10/100/1000BASE-T copper ports (48 in total)	(2) RJ-45 Ethernet port LED. For the LED description, see Table2-96.

LEDs

Table2-96 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

Ports

Table2-97 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-GT48LA1	48-port 10/100/1000BASE-T Ethernet interface module	RJ-45	48	10/100/1000 Mbps

Technical specifications

Table2-98 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.31 kg (7.29 lb)
Maximum power consumption	95 W
Typical power consumption	86 W
Minimum power consumption	67 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-XP2LA1

View

Figure2-14 CSPC-XP2LA1 view

(1) 10GBASE-R-XFP fiber ports (2 in total)	(2) XFP port LED. For the LED description, see Table2-99.

LEDs

Table2-99 XFP port LED description

LED status		Description
LINK	ACT	Description
Steady on	Flashing	A link is present, and the port is sending or receiving data.
Steady on	Off	A link is present, but the port is not sending or receiving data.
Off	Off	No link is present on the XFP port.

Ports

Table2-100 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-XP2LA1	2-port 10GBASE Ethernet optical interface module	LC	2	10 Gbps

Technical specifications

Table2-101 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	2.93 kg (6.46 lb)
Maximum power consumption	55 W
Typical power consumption	50 W
Minimum power consumption	43 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-XP4LB

View

Figure2-15 CSPC-XP4LB view

(1) 10GBASE-R-XFP fiber ports (2 in total)	(2) XFP port LED. For the LED description, see Table2-102.

LEDs

Table2-102 XFP port LED description

LED status		Description
LINK	ACT	Description
Steady on	Flashing	A link is present, and the port is sending or receiving data.
Steady on	Off	A link is present, but the port is not sending or receiving data.
Off	Off	No link is present on the XFP port.

Ports

Table2-103 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-XP4LB	4-port enhanced 10GBASE Ethernet optical interface module	LC	4	10 Gbps

Technical specifications

Table2-104 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	2.93 kg (6.46 lb)
Maximum power consumption	80 W
Typical power consumption	72 W
Minimum power consumption	53 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPC-XP8LB

View

Figure2-16 CSPC-XP8LB view

(1) 10GBASE-R-SFP+ fiber ports (8 in total)	(2) SFP+ port LED. For the LED description, see Table2-105.

Status

Table2-105 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-106 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-XP8LB	8-port enhanced 10GBASE Ethernet optical interface module	LC	8	10 Gbps
CSPC-XP8LB	8-port enhanced 10GBASE Ethernet optical interface module	LC	8	10/100/1000 Mbps

Technical specifications

Table2-107 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.44 kg (7.58 lb)
Maximum power consumption	170 W
Typical power consumption	153 W
Minimum power consumption	117 W
Operating temperature	0°C to 45°C (32°F to 113°F)

SPC-CP1LC

View

Figure2-17 SPC-CP1LC view

(1) 100GBASE-R-CFP fiber port (1 in total)	(2) CFP port LED. For the LED description, see Table2-108.

LEDs

Table2-108 CFP port LED description

LED	Status	Description
CFP port LED	Flashing	The CFP port is sending or receiving data.
	Steady on	A link is present on the CFP port.
	Off	No link is present on the CFP port.

Ports

Table2-109 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
CSPC-CP1LCX	1-port 100GBASE Ethernet optical interface module	LC	1	100 Gbps

Technical specifications

Table2-110 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.40 kg (7.50 lb)
Maximum power consumption	120 W
Typical power consumption	108 W
Minimum power consumption	85 W
Operating temperature	0°C to 45°C (32°F to 113°F)

SPC-GP44XP4LA/SPC-GP44XP4LC

View

Figure2-18 SPC-GP44XP4LC view

(1) 1000BASE-X-SFP fiber ports (44 in total)	(2) 10GBASE-R-SFP+ fiber ports (4 in total)
(3) SFP port LED. For the LED description, see Table2-111.	(4) SFP+ port LED. For the LED description, see Table2-112.

NOTE:

The views of the SPC-GP44XP4LA and SPC-GP44XP4LC interface modules are similar. This figure uses the SPC-GP44XP4LC as an example.

Status

Table2-111 SFP port LED description

LED	Status	Description
SFP port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the SFP port.
	Off	No link is present on the port.

Table2-112 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-113 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
SPC-GP44XP4LA	44-port 1000BASE-X Ethernet optical interface module + 4-port 10GBASE Ethernet optical interface module	LC	44	100 Mbps
				1000 Mbps
				10/100/1000 Mbps
		LC	4	10 Gbps
SPC-GP44XP4LC	44-port 1000BASE-X Ethernet optical interface module + 4-port 10GBASE Ethernet optical interface module	LC	44	100 Mbps
				1000 Mbps
				10/100/1000 Mbps
		LC	4	10 Gbps

Technical specifications

Table2-114 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	· SPC-GP44XP4LA: 3.55 kg (7.83 lb) · SPC-GP44XP4LC: 3.60 kg (7.94 lb)
Maximum power consumption	· SPC-GP44XP4LA: 118 W · SPC-GP44XP4LC: 146 W
Typical power consumption	· SPC-GP44XP4LA: 106 W · SPC-GP44XP4LC: 131 W
Minimum power consumption	· SPC-GP44XP4LA: 83 W · SPC-GP44XP4LC: 90 W
Operating temperature	0°C to 45°C (32°F to 113°F)

SPC-XLP2XP4LC

View

Figure2-19 SPC-XLP2XP4LC view

(1) SFP+ port LED. For the LED description, see Table2-115.	(2) 10GBASE-R-SFP+ fiber ports (4 in total)
(3) 40GBASE-R-QSFP+ fiber ports (2 in total)	(4) QSFP+ port LED. For the LED description, see Table2-116.

LEDs

Table2-115 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Table2-116 QSFP+ port LED description

LED	Status	Description
QSFP+ port LED	Flashing	The QSFP+ port is sending or receiving data.
	Steady on	A link is present on the QSFP+ port.
	Off	No link is present on the QSFP+ port.

Ports

Table2-117 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
SPC-XLP2XP4LC	2-port 40GBASE Ethernet optical interface module + 4-port 10GBASE Ethernet optical interface module	LC	4	10 Gbps
		LC	4	10/100/1000 Mbps
		MPO/LC	2	40 Gbps

Technical specifications

Table2-118 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.20 kg (7.05 lb)
Maximum power consumption	143 W
Typical power consumption	128 W
Minimum power consumption	91 W
Operating temperature	0°C to 45°C (32°F to 113°F)

SPC-XP12LC

View

Figure2-20 SPC-XP12LC view

(1) 10GBASE-R-SFP+ fiber ports (12 in total)	(2) SFP+ port LED. For the LED description, see Table2-119.

Status

Table2-119 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-120 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
SPC-XP12LC	12-port 10GBASE Ethernet optical interface module	LC	12	10 Gbps
SPC-XP12LC	12-port 10GBASE Ethernet optical interface module	LC	12	10/100/1000 Mbps

Technical specifications

Table2-121 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.30 kg (7.28 lb)
Maximum power consumption	146 W
Typical power consumption	131 W
Minimum power consumption	91 W
Operating temperature	0°C to 45°C (32°F to 113°F)

SPC-XP24LC

View

Figure2-21 SPC-XP24LC view

(1) 10GBASE-R-SFP+ fiber ports (24 in total)	(2) SFP+ port LED. For the LED description, see Table2-122.

Status

Table2-122 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-123 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
SPC-XP24LC	24-port 10GBASE Ethernet optical interface module	LC	24	10 Gbps
SPC-XP24LC	24-port 10GBASE Ethernet optical interface module	LC	24	10/100/1000 Mbps

Technical specifications

Table2-124 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	4.20 kg (10.36 lb)
Maximum power consumption	400 W
Typical power consumption	267 W
Minimum power consumption	174 W
Operating temperature	0°C to 45°C (32°F to 113°F)

CSPEX base cards

CSPEX-1204/CSPEX-1304S/CSPEX-1404S/CSPEX-1504S/CSPEX-1104-E

View

Figure2-22 CSPEX-1204 view

(1) Card status LED. For the LED description, see Table2-125.

The views of the CSPEX-1204, CSPEX-1304S, CSPEX-1404S, CSPEX-1504S, and CSPEX-1104-E base cards are similar. This figure uses the CSPEX-1204 as an example.

LEDs

Table2-125 LED description

LED	Status	Description
RUN (green)	Steady on	The card is faulty.
	Off	The card is faulty or is not present.
	Flashing (about once per second)	The card is operating correctly.
	Fast flashing (about eight times per second)	The card is starting up. If the LED keeps fast flashing, card registration has failed.

Subcard slots

Table2-126 Subcard slots

Card model	Number of subcard slots
CSPEX-1104-E	4
CSPEX-1204	4
CSPEX-1304S	4
CSPEX-1404S	4
CSPEX-1504S	4

Technical specifications

Table2-127 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	· CSPEX-1104-E: 3.45 kg (7.61 lb) · CSPEX-1204: 3.50 kg (7.72 lb) · CSPEX-1304S: 3.75 kg (8.27 lb) · CSPEX-1404S: 3.65 kg (8.05 lb) · CSPEX-1504S: 3.85 kg (8.49 lb)
Maximum power consumption	· CSPEX-1104-E: 164 W · CSPEX-1204: 190 W · CSPEX-1304S: 184 W · CSPEX-1404S: 230 W · CSPEX-1504S: 261 W
Typical power consumption	· CSPEX-1104-E: 88 W · CSPEX-1204: 104 W · CSPEX-1304S: 106 W · CSPEX-1404S: 148 W · CSPEX-1504S: 176 W
Minimum power consumption	· CSPEX-1104-E: 79 W · CSPEX-1204: 88 W · CSPEX-1304S: 92 W · CSPEX-1404S: 120.5 W · CSPEX-1504S: 128.3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

Configuration restrictions and guidelines

The CSPEX-1304S, CSPEX-1404S, and CSPEX-1504S base cards are not compatible with the CSR07SRPUB1 and CSR07SRPUC1 MPUs.

Do not mix CSPEX-1304S, CSPEX-1404S, or CSPEX-1504S base cards with other CSPEX cards than these three on an SR8803-F router.

A CSPEX-1104-E card supports a maximum of three MIC-XP4L1 or MIC-GP4L subcards or a maximum of three of them in combinations.

Compatibility information

Compatibility matrix between CSPEX based cards and subcards

Table2-128 Compatibility matrix between CSPEX cards and subcards

Card model	CSPEX card
Card model	CSPEX-1504S/CSPEX-1404S	CSPEX-1304S	CSPEX-1204	CSPEX-1104-E
PIC-GP10L	Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported
PIC-TCP8L	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported
PIC-PSP4L	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported
PIC-PS2G4L	Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported
PIC-PUP1L	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported
PIC-XP1L	Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported
MIC-GT20L	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported
MIC-ET16L	Supported	Supported	Supported	Supported
MIC-CLP2L	Supported	Supported	Supported	Supported
MIC-CLP4L	Supported	Supported	Supported	Supported
MIC-SP4L	Supported	Supported	Supported	Supported
MIC-SP8L	Supported	Supported	Supported	Supported
MIC-GP4L	Supported	Supported	Slots 1 and 2: Not supported Slots 3 and 4: Supported	Supported. A maximum of three are supported
MIC-GP8L	Not supported	Not supported	Slots 1 and 2: Not supported Slots 3 and 4: Supported	Not supported
MIC-GP10L1	Not supported	Not supported	Slots 1 and 2: Not supported Slots 3 and 4: Supported	Not supported
MIC-GP10L-V2	Supported	Slots 1, 2, and 3: Supported Slot 4: Not supported	Not supported	Supported
MIC-GP20L	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Slots 1 and 2: Supported Slots 3 and 4: Not supported
MIC-XP2L	Supported	Supported	Not supported	Supported
MIC-XP2L-LAN	Supported	Supported	Not supported	Supported
MIC-XP4L1	Supported	Supported	Not supported	Supported. A maximum of three are supported
MIC-XP5L	Supported	Supported	Not supported	Not supported
MIC-XP5L1	Supported	Supported	Not supported	Not supported
MIC-XP5L2	Supported	Supported	Not supported	Not supported
MIC-QP1L	Supported	Supported	Not supported	Not supported
MIC-CP1L	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Not supported	Not supported
MIC-CQ1L1	Slots 1 and 2: Supported Slots 3 and 4: Not supported	Not supported	Not supported	Not supported
MIC-PSP4L	Supported	Supported	Not supported	Supported
MIC-TCP8L	Supported	Slots 1, 2, and 3: Supported Slot 4: Not supported	Not supported	Supported

CMPE base cards

CMPE-1104

View

Figure2-23 CMPE-1104 view

(1) Card status LED. For the LED description, see Table2-129.

LEDs

Table2-129 LED description

LED	Status	Description
RUN (green)	Steady on	The card is faulty.
	Off	The card is faulty or is not present.
	Flashing (about once per second)	The card is operating correctly.
	Fast flashing (about eight times per second)	The card is starting up. If the LED keeps fast flashing, card registration has failed.

Subslots

Table2-130 Subslots

Card model	Number of subcard slots
CMPE-1104	4

Technical specifications

Table2-131 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.52 kg (7.76 lb)
Maximum power consumption	158 W
Typical power consumption	94 W
Minimum power consumption	91 W
Operating temperature	0°C to 45°C (32°F to 113°F)

Configuration restrictions and guidelines

The CMPE subslot restrictions depend on its subcard mode. For more information about the subcard mode, see H3C SR8800-F Routers Configuration Guides.

Compatibility information

Compatibility matrix between CMPE based cards and subcards

Table2-132 Compatibility matrix between CMPE cards and subcards

Subcard model	CMPE base card
PIC-GP10L	Not supported
PIC-TCP8L	Not supported
PIC-PSP4L	Not supported
PIC-PS2G4L	Not supported
PIC-PUP1L	Not supported
PIC-XP1L	Not supported
MIC-GT20L	Not supported
MIC-CLP4L	Supported
MIC-ET16L	Supported
MIC-CLP2L	Supported
MIC-SP8L	Only one is supported. Can be installed only slot 1 or slot 2.
MIC-SP4L	Supported
MIC-GP4L	Supported
MIC-GP8L	Slots 3 and 4: Not supported
MIC-GP10L1	Not supported
MIC-GP10L-V2	Not supported
MIC-GP20L	Not supported
MIC-XP2L	Not supported
MIC-XP2L-LAN	Not supported
MIC-XP4L1	Not supported
MIC-XP5L	Not supported
MIC-XP5L1	Not supported
MIC-XP5L2	Not supported
MIC-QP1L	Not supported
MIC-CP1L	Not supported
MIC-CQ1L1	Not supported
MIC-PSP4L	Not supported
MIC-TCP8L	Not supported

MIC subcards

IMPORTANT:

· To use a MIC interface card, you must install it on a CMPE or CSPEX base card. You cannot install it directly on the router.

· For the compatibility between MIC interface cards and CMPE or CSPEX base cards, see compatibility information for the base cards.

· A combo interface is a logical interface that consists of an SFP port and an RJ-45 Ethernet port. Only one of the two ports can be operational at a time.

· Some MIC subcards support changing the speed. For more information, see H3C SR8800-F Routers Configuration Guides.

MIC-CLP2L

View

Figure2-24 MIC-CLP2L view

(1) CPOS-OC3/STM1-SFP port (2 in total)	(2) Port LED. For the LED description, see Table2-133.

LEDs

Table2-133 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Flashing green	The port is up and is receiving or sending data correctly.
	Steady green	The port is up and no services are running on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-134 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-CLP2L	2-port OC-3/STM-1 CPOS optical interface card	LC	2	155 Mbps (OC-3/STM-1)

Technical specifications

Table2-135 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.32 kg (0.71 lb)
Maximum power consumption	10.9 W
Minimum power consumption	9.8 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-CLP4L

View

Figure2-25 MIC-CLP4L view

(1) CPOS-OC3/STM1-SFP port (4 in total)	(2) Port LED. For the LED description, see Table2-136.

LEDs

Table2-136 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Flashing green	The port is up and is receiving or sending data correctly.
	Steady green	The port is up and no services are running on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-137 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-CLP4L	4-port OC-3/STM-1 CPOS optical interface card	LC	4	155 Mbps (OC-3/STM-1)

Technical specifications

Table2-138 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	12.9 W
Minimum power consumption	9.8 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-CP1L

View

Figure2-26 MIC-CP1L view

(1) 100GBASE-R-CFP fiber port (1 in total)	(2) CFP port LED. For the LED description, see Table2-139.

LEDs

Table2-139 CFP port LED description

LED	Status	Description
CFP port LED	Flashing	The CFP port is sending or receiving data.
	Steady on	A link is present on the CFP port.
	Off	No link is present on the CFP port.

Ports

Table2-140 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-CP1L	1-port 100G optical interface card (CFP, LC)	LC	1	100 Gbps

Technical specifications

Table2-141 MIC-CP1L

Item	Description
Dimensions (H × W × D)	37 × 171 × 157 mm (1.46 × 6.74 × 6.19 in)
Weight	0.55 kg (1.21 lb)
Maximum power consumption	11.8 W
Minimum power consumption	3.3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-CQ1L1

View

Figure2-27 MIC-CQ1L1 view

(1) 100GBASE-R-QSFP28 fiber port (1 in total)	(2) QSFP28 port LED. For the LED description, see Table2-142.

LEDs

Table2-142 QSFP28 port LED description

LED	Status	Description
QSFP28 port LED	Flashing	The QSFP28 port is sending or receiving data at 100 Gbps.
	On	A 100 Gbps link is present on the QSFP28 port.
	Off	No link is present on the QSFP28 port.

Ports

Table2-143 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-CQ1L1	1-port 100G optical interface card	LC	1	100 Gbps
MIC-CQ1L1	1-port 100G optical interface card	LC	1	40 Gbps

Technical specifications

Table2-144 Technical specifications

Item	Description
Dimensions (H × W × D)	37 × 171 × 157 mm (1.46 × 6.74 × 6.18 in)
Weight	0.50 kg (1.10 lb)
Maximum power consumption	15 W
Minimum power consumption	9 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-ET16L

View

Figure2-28 MIC-ET16L view

(1) E1-HM96 copper ports (16 in total)	(2) Port LED. For the LED description, see Table2-145.

LEDs

Table2-145 LED description

LED	Status	Description
ACT/ALM	Flashing green	The port is sending or receiving data.
	Steady green	A link is present, but the port is not receiving or sending data.
	Red	An alarm has occurred.
	Off	No link is present on the port.

Ports

Table2-146 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-ET16L	16-port E1 electrical interface card (HM96 male connector)	HM96 male	16	E1

Technical specifications

Table2-147 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	8.7 W
Minimum power consumption	8.6 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-GP10L1

View

Figure2-29 MIC-GP10L1 view

(1) 1000BASE-X-SFP fiber ports (10 in total)	(2) SFP port LED. For the LED description, see Table2-148.

LEDs

Table2-148 GE SFP port LED description

LED	Status	Description
GE SFP port LED (LINK/ACT)	Flashing green	The SFP port is sending or receiving data.
	Steady green	A link is present on the SFP port.
	Off	No link is present on the SFP port.

Ports

Table2-149 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-GP10L1	10-port 1000BASE-X optical interface card (SFP, LC)	LC	10	1000 Mbps
MIC-GP10L1	10-port 1000BASE-X optical interface card (SFP, LC)	LC	10	10/100/1000 Mbps

Technical specifications

Table2-150 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	7.9 W
Minimum power consumption	2.1 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-GP10L-V2

View

Figure2-30 MIC-GP10L-V2 view

(1) 1000BASE-X-SFP fiber ports (10 in total)	(2) SFP port LED. For the LED description, see Table2-151.

LEDs

Table2-151 GE SFP port LED description

LED	Status	Description
GE SFP port LED (LINK/ACT)	Flashing green	The SFP port is sending or receiving data.
	Steady green	A link is present on the SFP port.
	Off	No link is present on the SFP port.

Ports

Table2-152 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-GP10L-V2	10-port 1000BASE-X Ethernet optical interface card (SFP, LC)	LC	10	1000 Mbps
				10/100/1000 Mbps
				100 Mbps

Technical specifications

Table2-153 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.35 kg (0.77 lb)
Maximum power consumption	9.4 W
Minimum power consumption	9.3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-GP20L

View

Figure2-31 MIC-GP20L view

(1) 1000BASE-X-SFP fiber ports (20 in total)	(2) SFP port LED. For the LED description, see Table2-154.

LEDs

Table2-154 GE SFP port LED description

LED	Status	Description
GE SFP port LED (LINK/ACT)	Flashing green	The SFP port is sending or receiving data.
	Steady green	A link is present on the SFP port.
	Off	No link is present on the SFP port.

Ports

Table2-155 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-GP20L	20-port 1000BASE-X Ethernet optical interface card (SFP, LC)	LC	20	1000 Mbps
				10/100/1000 Mbps
				100 Mbps

Technical specifications

Table2-156 Technical specifications

Item	Description
Dimensions (H × W × D)	37 × 171 × 157 mm (1.46 × 6.73 × 6.18 in)
Weight	0.55 kg (1.21 lb)
Maximum power consumption	23 W
Minimum power consumption	7.6 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-GP4L

View

Figure2-32 MIC-GP4L view

(1) Combo interfaces (4 in total)	(2) Combo fiber port LINK/ACT LED. For the LED description, see Table2-157.
(3) Combo copper port LINK LED. For the LED description, see Table2-157.	(4) Combo copper port ACT LED. For the LED description, see Table2-157.

LEDs

Table2-157 Combo interface LED description

Port type	LED	Status	Description
Combo fiber port	LINK/ACT	Steady on	A link is present on the port.
		Flashing	The port is receiving or sending data correctly.
		Off	No link is present on the port.
Combo copper port	LINK (green)	Steady on	A link is present on the port.
	LINK (green)	Off	No link is present on the port.
	ACT (orange)	Flashing	The port is receiving or sending data correctly.
	ACT (orange)	Off	The port is not receiving or sending data.

Ports

Table2-158 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-GP4L	4-port 1000BASE-X/1000BASE-T combo interface card	RJ-45	4	10/100/1000 Mbps
		LC	4	100 Mbps
		LC	4	1000 Mbps

Technical specifications

Table2-159 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.31 kg (0.68 lb)
Maximum power consumption	5.5 W
Minimum power consumption	0.8 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-GP8L

View

Figure2-33 MIC-GP8L view

(1) 1000BASE-X-SFP fiber ports (8 in total)

(2) SFP port LED. For the LED description, see Table2-160.

LEDs

Table2-160 GE SFP port LED description

LED	Status	Description
GE SFP port LED (LINK/ACT)	Flashing green	The SFP port is sending or receiving data.
	Steady green	A link is present on the SFP port.
	Off	No link is present on the SFP port.

Ports

Table2-161 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-GP8L	8-port 1000BASE-X optical interface card (SFP, LC)	LC	8	100 Mbps
				1000 Mbps
				10/100/1000 Mbps

Technical specifications

Table2-162 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.29 kg (0.64 lb)
Maximum power consumption	4.7 W
Minimum power consumption	0.6 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-GT20L

View

Figure2-34 MIC-GT20L view

(1) 10/100/1000BASE-T copper ports (20 in total)	(2) RJ-45 Ethernet port LED. For the LED description, see Table2-163.

LEDs

Table2-163 RJ-45 Ethernet port LED description

LED	Status	Description
RJ-45 Ethernet port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

Ports

Table2-164 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-GT20L	20-port 1000BASE-X Ethernet electrical interface card (RJ45)	RJ-45	20	10/100/1000 Mbps

Technical specifications

Table2-165 Technical specifications

Item	Description
Dimensions (H × W × D)	37 × 171 × 157 mm (1.46 × 6.73 × 6.18 in)
Weight	0.50 kg (1.10 lb)
Maximum power consumption	11.9 W
Minimum power consumption	9.2 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-PSP4L

View

Figure2-35 MIC-PSP4L view

(1) OC-48c/STM-16c POS fiber ports (4 in total)	(2) Port LED. For the LED description, see Table2-166.

LEDs

Table2-166 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Flashing green	The port is up and is receiving or sending data correctly.
	Steady green	The port is up and no services are running on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-167 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-PSP4L	4-port OC-48c/STM-16c POS optical interface card (SFP, LC)	LC	4	2.5 Gbps

Technical specifications

Table2-168 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.40 kg (0.88 lb)
Maximum power consumption	33 W
Minimum power consumption	29 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-QP1L

View

Figure2-36 MIC-QP1L view

(1) 40GBASE-R-QSFP+ fiber ports (1 in total)	(2) QSFP+ port LED. For the LED description, see Table2-169.

LEDs

Table2-169 QSFP+ port LED description

LED	Status	Description
QSFP+ port LED	Flashing	The QSFP+ port is sending or receiving data.
	Steady on	A link is present on the QSFP+ port.
	Off	No link is present on the QSFP+ port.

Ports

Table2-170 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-QP1L	1-port 40G Ethernet optical interface card (QSFP+, LC)	LC	1	40 Gbps
MIC-QP1L	1-port 40G Ethernet optical interface card (QSFP+, LC)	LC	4	10 Gbps

Technical specifications

Table2-171 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.35 kg (0.77 lb)
Maximum power consumption	7 W
Minimum power consumption	3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-SP4L

View

Figure2-37 MIC-SP4L view

(1) 4 × OC-3c/STM-1c POS/ATM fiber ports or 1 × OC-12c/STM-4c POS/ATM fiber ports (only port 1 supports OC-12c/STM-4c)	(2) Port LED. For the LED description, see Table2-172.

LEDs

Table2-172 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Flashing green	The port is up and is receiving or sending data correctly.
	Steady green	The port is up and no services are running on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-173 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-SP4L	4-port OC-3c/STM-1c POS/ATM or 1-port OC-12c/STM-4c POS/ATM optical interface card (SFP, LC)	LC	4	155 Mbps (OC-3/STM-1)
MIC-SP4L		LC	1	622 Mbps (OC-12/STM-4)

Technical specifications

Table2-174 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	13.5 W
Minimum power consumption	9.6 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-SP8L

View

Figure2-38 MIC-SP8L view

(1) OC-3c/STM-1c POS fiber ports (8 in total)	(2) Port LED. For the LED description, see Table2-175.

LEDs

Table2-175 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Flashing green	The port is up and is receiving or sending data correctly.
	Steady green	The port is up and no services are running on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-176 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-SP8L	8-port OC-3c/STM-1c POS optical interface card (SFP, LC)	LC	8	155 Mbps (OC-3/STM-1)

Technical specifications

Table2-177 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	16.3 W
Minimum power consumption	14 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-TCP8L

View

Figure2-39 MIC-TCP8L view

(1) OC-3c/OC-12c POS/GE fiber ports (8 in total)	(2) Port LED. For the LED description, see Table2-178.

LEDs

Table2-178 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Flashing green	The port is up and is receiving or sending data correctly.
	Steady green	The port is up and no services are running on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-179 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-TCP8L	8-port OC-3c/OC-12c POS/GE optical interface card (SFP, LC)	LC	8	155 Mbps (OC-3/STM-1)
				622 Mbps (OC-12/STM-4)
				10/100/1000 Mbps
				1000 Mbps

Technical specifications

Table2-180 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.40 kg (0.88 lb)
Maximum power consumption	30 W
Minimum power consumption	28 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-XP2L

View

Figure2-40 MIC-XP2L view

(1) 10GBASE-R/W-SFP+ fiber ports (2 in total)	(2) SFP+ port LED. For the LED description, see Table2-181.

LEDs

Table2-181 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-182 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-XP2L	2-port 10GBASE-R Ethernet optical interface card (SFP+, LC)	LC	2	100 Mbps
				10/100/1000 Mbps
				1000 Mbps
				10 Gbps

Technical specifications

Table2-183 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.29 kg (0.64 lb)
Maximum power consumption	13 W
Minimum power consumption	10 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-XP2L-LAN

View

Figure2-41 MIC-XP2L-LAN view

(1) 10GBASE-R-SFP+ fiber ports (2 in total)	(2) SFP+ port LED. For the LED description, see Table2-184.

LEDs

Table2-184 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-185 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-XP2L-LAN	2-port 10GBASE-R Ethernet optical interface card (SFP+, LC)-LAN	LC	2	100 Mbps
				10/100/1000 Mbps
				1000 Mbps
				10 Gbps

Technical specifications

Table2-186 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.28 kg (0.62 lb)
Maximum power consumption	9 W
Minimum power consumption	6 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-XP4L1

View

Figure2-42 MIC-XP4L1 view

(1) 10GBASE-R/W-SFP+ fiber ports (4 in total)	(2) SFP+ port LED. For the LED description, see Table2-187.

LEDs

Table2-187 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-188 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-XP4L1	4-port 10GBASE-R/W Ethernet optical interface card 1	LC	4	100 Mbps
				10/100/1000 Mbps
				1000 Mbps
				10 Gbps

Technical specifications

Table2-189 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	13 W
Minimum power consumption	11 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-XP5L

View

Figure2-43 MIC-XP5L view

(1) 10GBASE-R/W-SFP+ fiber ports (5 in total)	(2) SFP+ port LED. For the LED description, see Table2-190.

LEDs

Table2-190 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-191 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-XP5L	5-port 10GBASE-R/W Ethernet optical interface card	LC	5	100 Mbps
				10/100/1000 Mbps
				1000 Mbps
				10 Gbps

Technical specifications

Table2-192 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.30 kg (0.66 lb)
Maximum power consumption	14.2 W
Minimum power consumption	10.4 W
Operating temperature	0°C to 45°C (32°F to 113°F)

MIC-XP5L1/MIC-XP5L2

View

Figure2-44 MIC-XP5L1 view

(1) 10GBASE-R/W-SFP+ fiber ports (5 in total)	(2) SFP+ port LED. For the LED description, see Table2-193.

The views of the MIC-XP5L1 and MIC-XP5L2 interface cards are similar. The figure uses the MIC-XP5L1 as an example.

LEDs

Table2-193 SFP+ port LED description

LED	Status	Description
SFP+ port LED	Flashing	The port is sending or receiving data.
	Steady on	A link is present on the port.
	Off	No link is present on the port.

NOTE:

Ports

Table2-194 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
MIC-XP5L1	5-port 10GBASE-R/W Ethernet optical interface card	LC	5	10/100/1000 Mbps
MIC-XP5L1	5-port 10GBASE-R/W Ethernet optical interface card	LC	5	10 Gbps
MIC-XP5L2	5-port 10GBASE-R Ethernet optical interface card	LC	5	10/100/1000 Mbps
MIC-XP5L2	5-port 10GBASE-R Ethernet optical interface card	LC	5	10 Gbps

Technical specifications

Table2-195 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.35 kg (0.77 lb)
Maximum power consumption	· MIC-XP5L1: 13 W · MIC-XP5L2: 6.4 W
Minimum power consumption	· MIC-XP5L1: 11 W · MIC-XP5L2: 2.3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

PIC subcards

IMPORTANT:

· To use a PIC interface card, you must install it on a CMPE or CSPEX base card. You cannot install it directly on the router.

· For the compatibility between PIC interface cards and CMPE or CSPEX base cards, see compatibility information for the base cards.

PIC-GP10L

View

Figure2-45 PIC-GP10L view

(1) 1000BASE-X-SFP Ethernet fiber port (10 in total)	(2) SFP port LED. For the LED description, see Table2-196.

LEDs

Table2-196 GE SFP port LED description

LED	Status	Description
GE SFP port LED (LINK/ACT)	Flashing green	The SFP port is sending or receiving data.
	Steady green	A link is present on the SFP port.
	Off	No link is present on the SFP port.

Ports

Table2-197 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
PIC-GP10L	10-port GE optical interface module	LC	10	100 Mbps
				1000 Mbps
				10/100/1000 Mbps

Technical specifications

Table2-198 PIC-GP10L

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.45 kg (0.99 lb)
Maximum power consumption	21 W
Minimum power consumption	9.5 W
Operating temperature	0°C to 45°C (32°F to 113°F)

PIC-PS2G4L

View

Figure2-46 PIC-PS2G4L view

(1) OC48c/STM16c-SFP POS fiber ports (2 in total)	(2) 1000BASE-X-SFP GE fiber ports (4 in total)
(3) POS port LED. For the LED description, see Table2-199.	(4) GE port LED. For the LED description, see Table2-200.

LEDs

Table2-199 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Steady green	The port is up and a link is present on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Table2-200 GE SFP port LED description

LED	Status	Description
GE SFP port LED (LINK/ACT)	Flashing green	The SFP port is sending or receiving data.
	Steady green	A link is present on the SFP port.
	Off	No link is present on the SFP port.

Ports

Table2-201 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
PIC-PS2G4L	2-port OC-48c/STM-16c POS optical interface (SFP, LC) + 4-port 1000BASE-X optical interface card (SFP, LC)	LC	2	2.5 Gbps (OC-48/STM-16)
			4	1000 Mbps
			4	10/100/1000 Mbps

Technical specifications

Table2-202 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.40 kg (0.88 lb)
Maximum power consumption	16 W
Minimum power consumption	9.3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

PIC-PSP4L

View

Figure2-47 PIC-PSP4L view

(1) OC48c/STM16c-SFP POS fiber ports (4 in total)	(2) Port LED. For the LED description, see Table2-203.

LEDs

Table2-203 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Steady green	The port is up and a link is present on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-204 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
PIC-PSP4L	4-port OC-48c/STM-16c POS optical interface card (SFP, LC)	LC	4	2.5 Gbps (OC-48/STM-16)

Technical specifications

Table2-205 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.40 kg (0.88 lb)
Maximum power consumption	18 W
Minimum power consumption	9.7 W
Operating temperature	0°C to 45°C (32°F to 113°F)

PIC-PUP1L

View

Figure2-48 PIC-PUP1L view

(1) OC192c/STM64c-XFP POS fiber ports (1 in total)	(2) Port LED. For the LED description, see Table2-206.

LEDs

Table2-206 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Steady green	The port is up and a link is present on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-207 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
PIC-PUP1L	1-port OC-192c/STM-64c POS optical interface card (XFP, LC)	LC	1	10 Gbps (OC-192/STM-64)

Technical specifications

Table2-208 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.50 kg (1.10 lb)
Maximum power consumption	19 W
Minimum power consumption	14.3 W
Operating temperature	0°C to 45°C (32°F to 113°F)

PIC-TCP8L

View

Figure2-49 PIC-TCP8L view

(1) OC3c/OC12c/1000BASE-X-SFP POS/GE fiber ports (8 in total)	(2) Port LED. For the LED description, see Table2-209.

LEDs

Table2-209 WAN port LED description

LED	Status	Description
WAN port LED (ACT/ALM)	Steady green	The port is up and a link is present on the port.
	Steady red	An alarm has occurred.
	Off	The port is down.

Ports

Table2-210 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
PIC-TCP8L	8-port OC-3c/OC-12c POS/GE optical interface card (SFP, LC)	LC	8	155 Mbps (OC-3/STM-1)
				622 Mbps (OC-12/STM-4)
				1000 Mbps
				10/100/1000 Mbps

Technical specifications

Table2-211 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.40 kg (0.88 lb)
Maximum power consumption	17 W
Minimum power consumption	9.7 W
Operating temperature	0°C to 45°C (32°F to 113°F)

PIC-XP1L

View

Figure2-50 PIC-XP1L view

(1) 10GBASE-R/W-XFP fiber ports (1 in total)	(2) XFP port LED. For the LED description, see Table2-212.

LEDs

Table2-212 10GE XFP port LED description

LED	Status	Description
10 GE XFP port LED (LINK/ACT)	Flashing green	The XFP port is sending or receiving data.
	Steady green	A link is present on the XFP port.
	Off	No link is present on the XFP port.

Ports

Table2-213 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
PIC-XP1L	1-port 10GBASE-R/W Ethernet optical interface card (XFP, LC)	LC	1	10 Gbps

Technical specifications

Table2-214 Technical specifications

Item	Description
Dimensions (H × W × D)	18 × 171 × 157 mm (0.71 × 6.73 × 6.18 in)
Weight	0.45 kg (0.99 lb)
Maximum power consumption	23.7 W
Minimum power consumption	12.5 W
Operating temperature	0°C to 45°C (32°F to 113°F)

OAA modules

IMPORTANT:

A combo interface is a logical interface that consists of an SFP port and an RJ-45 Ethernet port. Only one of the two ports can be operational at a time.

LSU1ADECEA0

View

Figure2-51 LSU1ADECEA0 view

(1) Console port (CONSOLE)	(2) USB port (reserved for future use)
(3) Combo copper port (10/100/1000BASE-T)	(4) Combo copper port LED (LINK/ACT)
(5) Combo fiber port (1000BASE-X)	(6) Combo fiber port LED (LINK/ACT)
(7) Alarm LED (ALM)	(8) Running status LED (RUN)
(9) Ejector lever	(10) Captive screw

LEDs

Table2-215 LED description

LED	Mark	Status	Description
Alarm LED	ALM	Off	The module is operating correctly, and no alarm is present.
Alarm LED	ALM	Steady red	A critical fault is present on the module. You must view the logs and locate and resolve the issue immediately.
Running status LED (RUN)	RUN	Off	No power is present or the module is faulty.
		Steady green	The module is running incorrectly.
		Slow flashing green (1 Hz)	The module has started and entered a normal operating state.
		Fast flashing green (8 Hz)	The module is loading software or has not started.
Combo interface LED	LINK/ACT	Off	No link is present.
		Steady green	A link is present.
		Flashing green	The interface is sending or receiving data.

Ports

Table2-216 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
LSU1ADECEA0	Application delivery service module	RJ-45	2	10/100/1000 Mbps
LSU1ADECEA0	Application delivery service module	LC	2	1000 Mbps

Technical specifications

Table2-217 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.90 kg (8.60 lb)
Maximum power consumption	150 W
Minimum power consumption	109 W
Operating temperature	0°C to 45°C (32°F to 113°F)

LSU1FWCEA0

View

Figure2-52 LSU1FWCEA0 view

(1) Console port (CONSOLE)	(2) USB port (reserved for future use)
(3) Combo copper port (10/100/1000BASE-T)	(4) Combo copper port LED (LINK/ACT)
(5) Combo fiber port (1000BASE-X)	(5) Combo fiber port LED (LINK/ACT)
(7) Alarm LED (ALM)	(8) Running status LED (RUN)
(9) Ejector lever	(10) Captive screw

LEDs

Table2-218 LED description

LED	Mark	Status	Description
Alarm LED	ALM	Off	The module is operating correctly, and no alarm is present.
Alarm LED	ALM	Steady red	A critical fault is present on the module. You must view the logs and locate and resolve the issue immediately.
Running status LED	RUN	Off	No power is present or the module is faulty.
		Steady green	The module is running incorrectly.
		Slow flashing green (1 Hz)	The module has started and entered a normal operating state.
		Fast flashing green (8 Hz)	The module is loading software or has not started.
Combo interface LED	LINK/ACT	Off	No link is present.
		Steady green	A link is present.
		Flashing green	The interface is sending or receiving data.

Ports

Table2-219 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
LSU1FWCEA0	Firewall service module	RJ-45	2	10/100/1000 Mbps
LSU1FWCEA0	Firewall service module	LC	2	1000 Mbps

Technical specifications

Table2-220 LSU1FWCEA0

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.90 kg (8.60 lb)
Maximum power consumption	150 W
Minimum power consumption	109 W
Operating temperature	0°C to 45°C (32°F to 113°F)

LSU1IPSBEA0

View

Figure2-53 LSU1IPSBEA0 view

(1) Console port (CONSOLE)	(2) USB port (Control power supply for the external PFC power fail safeguard module)
(3) Combo copper port (10/100/1000BASE-T)	(4) Combo copper port LED (LINK/ACT)
(5) Combo fiber port (1000BASE-X)	(5) Combo fiber port LED (LINK/ACT)
(7) Alarm LED (ALM)	(8) Running status LED (RUN)
(9) Ejector lever	(10) Captive screw

LEDs

Table2-221 LED description

LED	Mark	Status	Description
Alarm LED	ALM	Off	The module is operating correctly, and no alarm is present.
Alarm LED	ALM	Steady red	A critical fault is present on the module. You must view the logs and locate and resolve the issue immediately.
Running status LED	RUN	Off	No power is present or the module is faulty.
		Steady green	The module is running incorrectly.
		Slow flashing green (1 Hz)	The module has started and entered a normal operating state.
		Fast flashing green (8 Hz)	The module is loading software or has not started.
Combo interface LED	LINK/ACT	Off	No link is present.
		Steady green	A link is present.
		Flashing green	The interface is sending or receiving data.

Ports

Table2-222 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
LSU1IPSBEA0	Intrusion prevention system module	RJ-45	2	10/100/1000 Mbps
LSU1IPSBEA0	Intrusion prevention system module	LC	2	1000 Mbps

Technical specifications

Table2-223 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.90 kg (8.60 lb)
Maximum power consumption	150 W
Minimum power consumption	109 W
Operating temperature	0°C to 45°C (32°F to 113°F)

LSU3FWCEA0

View

Figure2-54 LSU3FWCEA0 view

(1) Console port (CONSOLE)	(2) USB port (reserved for future use)
(3) Combo copper port (10/100/1000BASE-T)	(4) Combo copper port LED (LINK/ACT)
(5) Combo fiber port (1000BASE-X)	(6) Combo fiber port LED (LINK/ACT)
(7) Alarm LED (ALM)	(8) Running status LED (RUN)
(9) Ejector lever	(10) Captive screw

LEDs

Table2-224 LED description

LED	Mark	Status	Description
Alarm LED	ALM	Off	The module is operating correctly, and no alarm is present.
Alarm LED	ALM	Steady red	A critical fault is present on the module. You must view the logs and locate and resolve the issue immediately.
Running status LED	RUN	Off	No power is present or the module is faulty.
		Steady green	The module is running incorrectly.
		Slow flashing green (1 Hz)	The module has started and entered a normal operating state.
		Fast flashing green (8 Hz)	The module is loading software or has not started.
Combo interface LED	LINK/ACT	Off	No link is present.
		Steady green	A link is present.
		Flashing green	The interface is sending or receiving data.

Ports

Table2-225 Port specifications

Card model	Description	Connector type	Port quantity	Port transmission speed
LSU3FWCEA0	Firewall service module	RJ-45	2	10/100/1000 Mbps
LSU3FWCEA0	Firewall service module	LC	2	1000 Mbps

Technical specifications

Table2-226 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)
Weight	3.90 kg (8.60 lb)
Maximum power consumption	150 W
Minimum power consumption	109 W
Operating temperature	0°C to 45°C (32°F to 113°F)

Power supplies

PSR320-A

View

Figure2-55 PSR320-A view

(1) Captive screw	(2) Power input receptacle
(3) Power supply status LED	(4) Air inlet vent
(5) Power switch	(6) Power supply handle

LEDs

Table2-227 LED description

LED	Status	Description	Possible causes
Power supply status LED	Green	The power supply is operating correctly.	N/A
	Red	The power supply is operating incorrectly.	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · The fan of the power supply is faulty.
	Off	Abnormal power input	· Power supply failure. · Power cord connection failure. · External power supply system outage. · Power supply switch not turned on.

Technical specifications

Table2-228 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 140 × 350 mm (1.57 × 5.51 × 13.78 in)
Weight	1.90 kg (4.19 lb)
Inputs	1
Rated input voltage range	100 to 240 VAC @ 50/60 Hz
Input voltage range	90 to 264 VAC
Maximum input current	10 A
Rated output voltage	12 VDC
Rated output current	25 A
Rated output power	300 W
Front-end circuit breaker/fuse	≥ 6.3 A
Heat dissipation	Built-in fans
Power cord	Standard C13 cable (3*1.0 mm²/0.00155 in²)

PSR650-A

View

Figure2-56 PSR650-A view

(1) Captive screw	(2) Power input receptacle
(3) Power supply status LED	(4) Air inlet vent
(5) Power switch	(6) Power supply handle

LEDs

Table2-229 LED description

LED	Status	Description	Possible causes
Power supply status LED	Green	The power supply is operating correctly.	N/A
	Red	The power supply is operating incorrectly.	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · The fan of the power supply is faulty.
	Off	Abnormal power input	· Power supply failure. · Power cord connection failure. · External power supply system outage. · Power supply switch not turned on.

Technical specifications

Figure2-57 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 140 × 350 mm (1.57 × 5.51 × 13.78 in)
Weight	2.50 kg (5.51 lb)
Inputs	1
Rated input voltage range	100 to 240 VAC @ 50/60 Hz
Input voltage range	90 to 264 VAC
Maximum input current	10 A
Rated output voltage	12 VDC
Rated output current	54 A
Rated output power	650 W
Front-end circuit breaker/fuse	≥ 15 A
Heat dissipation	Built-in fans
Power cord	Standard C13 cable (3*1.0 mm²/0.00155 in²)

PSR650-D

View

Figure2-58 PSR650-D view

(1) Captive screw	(2) DC input receptacle (+, -, ground)
(3) Power supply status LED	(4) Air inlet vent
(5) Power switch	(6) Power supply handle

LEDs

Table2-230 LED description

LED	Status	Description	Possible causes
Power supply status LED	Green	The power supply is operating correctly.	N/A
	Red	The power supply is operating incorrectly.	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · The fan of the power supply is faulty.
	Off	Abnormal power input	· Power supply failure. · Power cord connection failure. · External power supply system outage. · Power supply switch not turned on.

Technical specifications

Table2-231 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 140 × 350 mm (1.57 × 5.51 × 13.78 in)
Weight	2.30 kg (5.07 lb)
Inputs	1
Rated input voltage range	–48 to – 60 VDC
Input voltage range	–36 to –72 V
Maximum input current	25 A
Rated output voltage	12 VDC
Rated output current	· 12 V: 54 A · 3.3 V: 4 A
Rated output power	650 W
Front-end circuit breaker/fuse	≥ 30 A
Heat dissipation	Built-in fans
Power cord	Standard OT-M4 cable (5.3 mm²/0.00822 in²)

PSR1200-A

View

Figure2-59 PSR1200-A view

(1) Captive screw	(2) Power input receptacle
(3) Power supply status LED	(4) Power supply handle
(5) Power switch	(6) Air inlet vent

LEDs

Table2-232 LED description

LED	Status	Description	Possible causes
Power supply status LED	Green	The power supply is operating correctly.	N/A
	Red	The power supply is operating incorrectly.	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · The fan of the power supply is faulty.
	Off	Abnormal power input	· Power supply failure. · Power cord connection failure. · External power supply system outage. · Power supply switch not turned on.

Technical specifications

Table2-233 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 140 × 350 mm (1.57 × 5.51 × 13.78 in)
Weight	2.60 kg (10.36 lb)
Inputs	1
Rated input voltage range	100 to 240 VAC @ 50/60 Hz
Input voltage range	90 to 264 VAC
Maximum input current	16 A
Rated output voltage range	· 12 VDC · 3.3 VDC
Rated output current	· 100 A · 4 A
Rated output power	1213 W
Front-end circuit breaker/fuse	≥ 20 A
Heat dissipation	Built-in fans
Power cord	Standard C19 cable (3*1.5 mm²/0.00232 in²)

PSR1200-D

View

Figure2-60 PSR1200-D view

(1) Captive screw	(2) DC input receptacle
(3) Power supply status LED	(4) Power supply handle
(5) Power switch	(6) Air inlet vent

LEDs

Table2-234 LED description

LED	Status	Description	Possible causes
Power supply status LED	Green	The power supply is operating correctly.	N/A
	Red	The power supply is operating incorrectly.	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · The fan of the power supply is faulty.
	Off	Abnormal power input	· Power supply failure. · Power cord connection failure. · External power supply system outage. · Power supply switch not turned on.

Technical specifications

Table2-235 Technical specifications

Item	Description
Dimensions (H × W × D)	40 × 140 × 350 mm (1.57 × 5.51 × 13.78 in)
Weight	2.50 kg (10.36 lb)
Inputs	1
Rated input voltage range	–48 to – 60 VDC
Input voltage range	–36 to–72 V
Maximum input current	42 A
Rated output voltage	· 12 VDC · 3.3 VDC
Rated output current	· 100 A · 4 A
Rated output power	1213 W
Front-end circuit breaker/fuse	≥ 50 A
Heat dissipation	Built-in fans
Power cord	Standard EN (6 to 18 mm/0.24 to 0.71 in) cable (13 mm²/0.0201 in²)

PSR1400-A

View

Figure2-61 PSR1400-A view

(1) Captive screw	(2) Power switch
(3) Power supply status LEDs	(4) Air inlet vent
(5) Power supply handle	(6) Power input receptacle

LEDs

Table2-236 LED description

LED	Status	Description	Possible causes
INPUT	Green	Normal power input	N/A
	Red	Abnormal power input	The input voltage is not in the rated voltage range.
	Off	No power input	· Power supply failure. · Power cord connection failure. · External power supply system outage.
OUTPUT	Green	Normal power output	N/A
	Red	Abnormal power output	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · Power supply switch not turned on.
	Off	No power output	· Power supply failure. · Power cord connection failure. · External power supply system outage.
FAN	Green	The fan of the power supply is operating correctly.	N/A
	Red	The fan of the power supply is operating incorrectly.	· The fan of the power supply is faulty. · Power supply switch not turned on.
	Off	The fan of the power supply is not operating.	· Power supply failure. · Power cord connection failure. · External power supply system outage.

Technical specifications

Table2-237 Technical specifications

Item	Description
Dimensions (H × W × D)	128 × 196 × 382 mm (5.04 × 7.72 × 15.04 in)
Weight	8.30 kg (18.30 lb)
Inputs	1
Rated input voltage range	100 to 240 VAC @ 50/60 Hz
Input voltage range	90 to 264 VAC
Maximum input current	16 A
Rated output voltage	12 VDC
Rated output current	117 A
Rated output power	· 1150 W (110 VAC) · 1400 W (220 VAC)
Front-end circuit breaker/fuse	≥ 20 A
Heat dissipation	Built-in fans
Power cord	Standard C19 cable (3*1.5 mm²/0.00232 in²)

PSR1400-D

View

Figure2-62 PSR1400-D view

(1) Captive screw	(2) External PoE power supply system monitoring port
(3) Power supply status LEDs	(4) DC input positive terminal (+)
(5) DC input negative terminal (–)	(6) Air inlet vent
(7) Power supply handle

LEDs

Table2-238 LED description

LED	Status	Description	Possible causes
INPUT	Green	Normal power input, and the system power output switch has been turned on.	N/A
	Red	Abnormal power input	The input voltage is not in the rated voltage range.
	Off	No power input	· Power supply failure. · Power cord connection failure. · External power supply system outage. · System power output switch not turned on.
OUTPUT	Green	Normal power output	N/A
	Red	Abnormal power output	An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: · Output short circuit. · Output overcurrent. · Output overvoltage. · Overtemperature.
	Off	No power output	· Power supply failure. · Power cord connection failure. · External power supply system outage.
FAN	Green	The fan of the power supply is operating correctly.	N/A
	Red	The fan of the power supply is operating incorrectly.	Fan failure
	Off	The fan of the power supply is not operating.	· Power supply failure. · Power cord connection failure. · External power supply system outage. · System power output switch not turned on.

Technical specifications

Table2-239 Technical specifications

Item	Description
Dimensions (H × W × D)	128 × 196 × 382 mm (5.04 × 7.72 × 15.04 in)
Weight	9.30 kg (20.50 lb)
Inputs	1
Rated input voltage range	–48 to – 60 VDC
Input voltage range	–40 to–72 V
Maximum input current	190 A (including 140 A PoE output)
Rated output voltage	12 VDC
Rated output current	117 A
Rated output power	1400 W
Front-end circuit breaker/fuse	· 60 A (Non-through module) · 150 A (Through module)
Heat dissipation	Built-in fans
Power cord	Standard JG2-M6 cable (13 mm²/0.0201 in²)

PSR2500-12AHD

View

Figure2-63 PSR2500-12AHD view

(1) Captive screw	(2) Power switch
(3) Power supply status LEDs	(4) Air inlet vent
(5) Power supply handle	(6) Power input receptacle

LEDs

Table2-240 LED description

LED	Status	Description	Possible causes
INPUT	Green	Normal power input	N/A
	Red	Abnormal power input	The input voltage is not in the rated voltage range.
	Off	No power input	· Power supply failure. · Power cord connection failure. · External power supply system outage.
OUTPUT	Green	Normal power output	N/A
	Red	Abnormal power output	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · Power supply switch not turned on.
	Off	No power output	· Power supply failure. · Power cord connection failure. · External power supply system outage.
FAN	Green	The fan of the power supply is operating correctly.	N/A
	Red	The fan of the power supply is operating incorrectly.	· The fan of the power supply is faulty. · Power supply switch not turned on.
	Off	The fan of the power supply is not operating.	· Power supply failure. · Power cord connection failure. · External power supply system outage.

Technical specifications

Table2-241 Technical specifications

Item	Description
Dimensions (H × W × D)	128 × 196 × 382 mm (5.04 × 7.72 × 15.04 in)
Weight	5.70 kg (12.57 lb)
Inputs	1
Rated input voltage range	· 100 to 240 VAC @ 50/60 Hz · 240 to 380 VDC
Input voltage range	· 90 to 290 VAC · 180 to 400 VDC
Maximum input current	16 A
Rated output voltage	12 VDC
Rated output current	· 100 A (100 to 180 VAC) · 208 A (180 to 240 VAC or 240 to 380 VDC)
Rated output power	· 1200 W (100 to 180 VAC) · 2500 W (180 to 240 VAC or 240 to 380 VDC)
Front-end circuit breaker/fuse	≥ 20 A
Heat dissipation	Built-in fans
Power cord	Standard HVDCB cable (3*1.5 mm²/0.00232 in²)

PSR2500-12D

View

Figure2-64 PSR2500-12D view

(1) Captive screw	(2) Power switch
(3) Power supply status LED	(4) DC input positive terminal (+)
(5) DC input negative terminal (–)	(6) Air inlet vent
(7) Power supply handle

LEDs

Table2-242 LED description

LED	Status	Description	Possible causes
INPUT	Green	Normal power input	N/A
	Red	Abnormal power input	The input voltage is not in the rated voltage range.
	Off	No power input	· Power supply failure. · Power cord connection failure. · External power supply system outage.
OUTPUT	Green	Normal power output	N/A
	Red	Abnormal power output	· An alarm is present on the power supply and the power supply has entered self-protection state because one of the following reasons: ¡ Input undervoltage. ¡ Output short circuit. ¡ Output overcurrent. ¡ Output overvoltage. ¡ Overtemperature. · Power supply switch not turned on.
	Off	No power output	· Power supply failure. · Power cord connection failure. · External power supply system outage.
FAN	Green	The fan of the power supply is operating correctly.	N/A
	Red	The fan of the power supply is operating incorrectly.	· The fan of the power supply is faulty. · Power supply switch not turned on.
	Off	The fan of the power supply is not operating.	· Power supply failure. · Power cord connection failure. · External power supply system outage.

Technical specifications

Table2-243 Technical specifications

Item	Description
Dimensions (H × W × D)	128 × 196 × 382 mm (5.04 × 7.72 × 15.04 in)
Weight	5.70 kg (12.57 lb)
Inputs	1
Rated input voltage range	–48 to – 60 VDC
Input voltage range	–36 to–72 V
Maximum input current	85 A
Rated output voltage	12 VDC
Rated output current	208 A
Rated output power	2500 W
Front-end circuit breaker/fuse	≥ 100 A
Heat dissipation	Built-in fans
Power cord	Standard JG2-M6 cable (13 mm²/0.0201 in²)

LSQM1PWRSPA power supply adapter

View

Figure2-65 LSQM1PWRSPA power supply adapter view

(1) Captive screw	(2) Power supply slot

Technical specifications

Table2-244 Technical specifications

Item	Description
Dimensions (H × W × D)	128 × 196 × 382 mm (5.04 × 7.72 × 15.04 in)
Weight	4.42 kg (9.74 lb)

LSQM1PWRSPB power supply adapter

View

Figure2-66 LSQM1PWRSPB power supply adapter view

(1) Captive screw	(2) Power supply slot A
(3) Power supply slot B

Technical specifications

Table2-245 Technical specifications

Item	Description
Dimensions (H × W × D)	128 × 196 × 382 mm (5.04 × 7.72 × 15.04 in)
Weight	4.95 kg (10.91 lb)

Configuration restrictions and guidelines

· For multi-level power distribution protection, make sure the rated current of the circuit breaker for the power input line of a power supply is not less than 1.2 times the maximum input current of the power supply.

· You must install a minimum of one power supply on the router. To improve power supply availability, you can install two power supplies on the router for redundancy.

· The power supplies installed on the router must be the same type (AC or DC) and model.

· Make sure the total maximum output power of the installed power supplies is greater than the system power consumption. As a best practice, reserve 20% of the maximum output power.

· Typically, an SR8803-F router uses power supplies of 1 RU high, and the other SR8800-F routers use power supplies of 3 RU high.

· To enable flexible use of power supplies for different overall power consumptions, H3C provides power supply adapters. The power supply adapter allow for insertion of a 1 RU high power supply into a 3 RU high power supply slot.

¡ To install a PSR650-A/PSR650-D power supply in a 3 RU power supply slot, use the LSQM1PWRSPA power supply adapter.

¡ To install a PSR1200-A/PSR1200-D power supply in a 3 RU power supply slot, use the LSQM1PWRSPB power supply adapter.

Compatibility information

Compatibility matrix between power supplies and routers

The available power supply models vary by router model. Select power supplies for the router based on the power supply conditions and power consumption requirements of the router.

Table2-246 Compatibility matrix between power supplies and routers

Power supply model	SR8803-F	SR8805-F	SR8808-F	SR8812-F
PSR320-A		-	-	-
PSR650-A				-
PSR650-D				-
PSR1200-A	-
PSR1200-D	-
PSR1400-A	-
PSR1400-D	-
PSR2500-12AHD	-
PSR2500-12D	-

NOTE:

· "" indicates that the power supply is compatible with the chassis.

· "" indicates that you must first install the power supply in a power supply adapter before inserting it into the chassis.

· "-" indicates that the power supply is not compatible with the chassis.

Fan trays

The router uses fan trays that can automatically adjust the speed to meet the cooling requirements.

The router comes with fan trays installed on it. To replace a fan tray, make sure the new fan tray is compatible with the router.

SR8803-F fan tray

View

Figure2-67 SR8803-F fan tray view

(1) Fan tray handle	(2) Captive screw
(3) Fan

Technical specifications

Table2-247 Technical specifications

Item	Description
Dimensions (H × W × D)	27 × 115 × 338 mm (1.06 × 4.53 × 13.31 in)
Weight	0.90 kg (1.98 lb)
Maximum power consumption	15 W
Typical power consumption	13 W
Minimum power consumption	7.5 W
Number of fans	3
Fan diameter	92 mm (3.62 in)
Max fan speed	3800 RPM
Maximum air flow rate	165 CFM

SR8805-F fan tray

View

Figure2-68 SR8805-F fan tray view

(1) Captive screw	(2) Fan tray handle
(3) Fan

Technical specifications

Table2-248 Technical specifications

Item	Description
Dimensions (H × W × D)	27 × 203 × 365 mm (1.06 × 7.99 × 14.37 in)
Weight	1.60 kg (3.53 lb)
Maximum power consumption	28 W
Typical power consumption	25 W
Minimum power consumption	15.5 W
Number of fans	6
Fan diameter	92 mm (3.62 in)
Max fan speed	3800 RPM
Maximum air flow rate	330 CFM

SR8808-F fan tray

View

Figure2-69 SR8808-F fan tray view

(1) Captive screw	(2) Fan tray handle
(3) Fan

Technical specifications

Table2-249 Technical specifications

Item	Description
Dimensions (H × W × D)	28 × 331 × 365 mm (1.10 × 13.03 × 14.37 in)
Weight	2.20 kg (10.36 lb)
Maximum power consumption	43 W
Typical power consumption	37 W
Minimum power consumption	24.5 W
Number of fans	9
Fan diameter	92 mm (3.62 in)
Max fan speed	3800 RPM
Maximum air flow rate	495 CFM

SR8812-F fan tray

View

Figure2-70 SR8812-F fan tray view

(1) Captive screw	(2) Fan tray handle
(3) Fan

Technical specifications

Table2-250 Technical specifications

Item	Description
Dimensions (H × W × D)	28 × 497 × 380 mm (1.10 × 19.57 × 14.96 in)
Weight	3.00 kg (6.61 lb)
Maximum power consumption	50 W
Typical power consumption	44 W
Minimum power consumption	28 W
Number of fans	· Upper half: 6 · Lower half: 4
Fan diameter	· Upper half: 92 mm (3.62 in) · Lower half: 120 mm (4.72 in)
Max fan speed	· Upper half: 3800 RPM · Lower half: 3100 RPM
Maximum air flow rate	662 CFM

Air filters

CAUTION:

Clean air filters periodically (once or more times every three months) to guarantee adequate ventilation and to avoid overtemperature.

To prevent dusts from entering the chassis, you can configure air filters for the router as needed and install them at the air intakes.

The available air filters vary by router model. Select air filters compatible with your router.

Slide rails

Before rack-mounting the router, install slide rails on the rack.

LSXM1BSR

Views

Figure2-71 LSXM1BSR view

(1) Positioning tongue	(2) Slide rail installation hole
(3) Front plate installation hole	(4) Sign
(5) Guide rail

Figure2-72 Front plate

(1) Installation hole

Technical specifications

Table2-251 Technical specifications

Item	Description
Maximum loading capacity	650 kg (1432.98 lb)
Adjustment range	630 to 900 mm (24.80 to 35.43 in)
Occupied rack space	1 RU

LSTM1KSGD0

Views

Figure2-73 LSTM1KSGD0 view

(1) Installation hole	(2) Sign
(3) Guide rail

Technical specifications

Table2-252 Technical specifications

Item	Description
Maximum loading capacity	280 kg (617.28 lb)
Adjustment range	300 to 500 mm (11.81 to 19.69 in)
Occupied rack space	2 RU

LSTM2KSGD0

Views

Figure2-74 LSTM2KSGD0 view

(1) Installation hole	(2) Sign
(3) Guide rail

Technical specifications

Table2-253 Technical specifications

Item	Description
Maximum loading capacity	400 kg (881.83 lb)
Adjustment range	500 to 800 mm (19.69 to 31.50 in)
Occupied rack space	2 RU

Configuration restrictions and guidelines

Select slide rails for the router based on the chassis weight.

Compatibility information

Chassis weights and applicable slide rails

Table2-254 Chassis weights and applicable slide rails

Model	Chassis weight (fully configured)	Applicable slide rails
SR8803-F	29 kg (63.93 lb)	LSXM1BSR LSTM1KSGD0 LSTM2KSGD0
SR8805-F	56 kg (123.46 lb)	LSXM1BSR LSTM1KSGD0 LSTM2KSGD0
SR8808-F	74 kg (163.14 lb)	LSXM1BSR LSTM1KSGD0 LSTM2KSGD0
SR8812-F	95 kg (209.44 lb)	LSXM1BSR LSTM1KSGD0 LSTM2KSGD0

CF cards

On an MPU with a CF card slot, you can install a CF card to expand the storage space for the device. A CF card can store startup files, configuration files, and logs.

Table2-255 CF card specifications

CF card model	Description	Storage capacity
CF-4G	Storage medium-compact flash card-4G	4 GB

DC power cords

A DC power cord is used to connect a DC power supply of a router to the external DC power supply system.

Table2-256 DC power cords available for DC power supplies

DC power supply	DC power cord code	Description
PSR650-D	0404A06T	3 m (9.84 ft)
	0404A01N	5 m (16.40 ft)
	0404A01P	10 m (32.82 ft)
	0404A073	20 m (65.62 ft)
PSR1200-D	0404A0DU	3 m (9.84 ft)
PSR1400-D/PSR2500-12D	0404A07G	3 m (9.84 ft)
	0404A08T	10 m (32.82 ft)
	0404A08U	20 m (65.62 ft)
	0404A072	25 m (82.02 ft)
PSR2500-12AHD	0404A0RL	High voltage, 3 m (9.84 ft)

AC power cords

An AC power cord is used to connect an AC power supply of a router to the external AC power supply system.

To select an AC power cord for an AC power supply, consider the following items:

· Power capacity of the power supply.

· Current-carrying capacity of the power cord.

· Region-and country-specific plug type.

The PSR320-A and PSR650-A power supplies require a 10A AC power cord. Table2-257 describes the region-and country-specific plug types for 10A AC power cords.

The PSR1200-A, PSR1400-A, and PSR2500-12AHD power supplies require a 16A AC power cord. Table2-258 describes the region-and country-specific plug types for 16A AC power cords. You need to use the 0404A0RP or 0404A0RQ AC power cord for the PSR2500-12AHD power supply. The 0404A0RP and 0404A0RQ AC power cords are available only for the PSR2500-12AHD power supply.

Table2-257 10A AC power cords used in different countries or regions

1		Plug type			Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
		I type			04041104: 3 m (9.8 ft)	Mainland China			N/A		N/A
		Plug outline				Power cord outline					Connector outline

2		Plug type		Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
		B type		04020728: 3 m (9.8 ft)		Canada and U.S.A			Mexico, Argentina, Brazil, Columbia, Venezuela, Thailand, Peru, Philippine, and A6 countries or regions		N/A
		Plug outline				Power cord outline					Connector outline

3		Plug type		Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
		F type		04041056: 3 m (9.8 ft)		Holland, Denmark, Sweden, Finland, Norway, Germany, France, Austria, Belgium, and Italy			Indonesia, Turkey, Russia, and CIS	N/A
		Plug outline				Power cord outline				Connector outline

4	Plug type			Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally		Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	G type			04040890: 3 m (9.8 ft)		U.K.		Malaysia, Hong Kong, and Egypt		N/A
	Plug outline					Power cord outline				Connector outline

5	Plug type			Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally		Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	B type			04040887: 3 m (9.8 ft)		Japan		N/A		N/A
	Plug outline					Power cord outline				Connector outline

6	Plug type			Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally		Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	I type			04040888: 3 m (9.8 ft)		Australia		N/A		N/A
	Plug outline					Power cord outline				Connector outline

7	Plug type			Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally		Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	J type			04041119: 3 m (9.8 ft)		Switzerland		N/A		N/A
	Plug outline					Power cord outline				Connector outline

8	Plug type			Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally		Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	L type			04041120: 3 m (9.8 ft)		Italy		N/A		N/A
	Plug outline					Power cord outline				Connector outline

9	Plug type		Code (Length)			Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords			Countries or regions seldom using this type of power cords
	D type		0404A0Q0: 3 m (9.8 ft)			India	N/A			N/A
	Plug outline					Power cord outline				Connector outline

Table2-258 16A AC power cords used in different countries or regions

1	Plug type	Code (Length)				Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	I type	04043396: 3 m (9.8 ft)				Mainland China			N/A		N/A
	Plug outline					Power cord outline					Connector outline

2	Plug type	Code (Length)				Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	B type	0404A063: 3 m (9.8 ft)				Canada and U.S.A			Mexico, Argentina, Brazil, Columbia, Venezuela, Thailand, Peru, Philippine, and A6 countries or regions		N/A
	Plug outline					Power cord outline					Connector outline

3	Plug type				Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally				Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	C20 type				0404A0C2: 3 m (9.8 ft)	Mainland China				N/A	N/A
	Plug outline					Power cord outline					Connector outline

4	Plug type	Code (Length)				Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	F type	0404A061: 3 m (9.8 ft)				Holland, Denmark, Sweden, Finland, Norway, Germany, France, Austria, Belgium, and Italy			Indonesia, Turkey, Russia, and CIS		N/A
	Plug outline					Power cord outline					Connector outline

5	Plug type	Code (Length)				Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	B type	0404A062: 3 m (9.8 ft)				Japan			N/A		N/A
	Plug outline					Power cord outline					Connector outline

6	Plug type	Code (Length)				Countries or regions where the type of power cords conforms to local safety regulations and can be used legally			Other countries or regions using this type of power cords		Countries or regions seldom using this type of power cords
	I type	0404A01A: 3 m (9.8 ft)				Australia			N/A		N/A
	Plug outline					Power cord outline					Connector outline

7	Plug type		Code (Length)			Countries or regions where the type of power cords conforms to local safety regulations and can be used legally		Other countries or regions using this type of power cords			Countries or regions seldom using this type of power cords
	N/A		0404A0RP: 3 m (9.8 ft)			China mainland		N/A			N/A
	Plug outline					Power cord outline					Connector outline

8	Plug type			Code (Length)		Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords				Countries or regions seldom using this type of power cords
	L type			0404A0RQ: 3 m (9.8 ft)		Mainland China	N/A				N/A
	Plug outline					Power cord outline					Connector outline

H3C SR8800-F Router Series Hardware Information and Specifications-5W100

View

LEDs

Ports

Console port

Management Ethernet port

USB port

CF card slot

Technical specifications

CSR07SRPUA1

View

LEDs

Ports

Console port

Management Ethernet port

USB port

MCC 10GE ports

Technical specifications

View

LEDs

Ports

Console port

Management Ethernet port

USB port

CF card slot

MCC 10GE ports

Technical specifications

View

LEDs

CF card LED

Ports

Console port

Management Ethernet port

USB port

CF card slot

Technical specifications

View

LEDs

Ports

Console port

Management Ethernet port

USB port

CF card slot

MCC 10GE ports

SMB coaxial clock input/output port

High-precision time synchronization port

Technical specifications

SPC/CSPC LPUs (interface modules)

View

LEDs

Ports

Technical specifications

View

LEDs

Ports

Technical specifications

View

Status

Ports

Technical specifications

View

LEDs

Ports

Technical specifications

View

Status

Ports

Technical specifications

View

LEDs

Ports

Technical specifications

View

LEDs

Ports

Technical specifications

View

LEDs

Ports

Technical specifications