Login
- Table of Contents
-
- 17-Network Management and Monitoring Command Reference
- 00-Preface
- 01-Information center commands
- 02-Flow log commands
- 03-Fast log output commands
- 04-NetStream commands
- 05-Mirroring commands
- 06-Packet capture commands
- 07-NQA commands
- 08-Track commands
- 09-BFD commands
- 10-Monitor Link commands
- 11-Smart Link commands
- 12-Interface backup commands
- 13-Interface collaboration commands
- 14-System maintenance and debugging commands
- 15-NTP commands
- 16-EAA commands
- 17-Process monitoring and maintenance commands
- 18-NETCONF commands
- 19-CWMP commands
- 20-SNMP commands
- 21-RMON commands
- 22-Event MIB commands
- 23-Process placement commands
- 24-gRPC commands
- 25-Cloud connection commands
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 05-Mirroring commands | 139.24 KB |
mirroring-group mirroring-port (interface view)
mirroring-group mirroring-port (system view)
mirroring-group monitor-port (interface view)
mirroring-group monitor-port (system view)
Port mirroring commands
The fixed interfaces of a device and the interfaces on interface cards cannot be assigned to the same mirroring group on devices of the following series:
· F5010, F5020, F5020-GM, F5040, F5000-AI-15, F5000-C, and F5000-S.
· F1000-AI-20, F1000-AI-25, F1000-AI-30, F1000-AI-35, F1000-AI-50, F1000-AI-55, F1000-AI-65, and F1000-AI-75.
· F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1000-V50, F1000-V60, and F1000-V70.
· F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK711, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380.
Port mirroring across IRF member devices are not supported. The mirroring sources and destination must reside on the same IRF member device.
Virtual interfaces do not support port mirroring.
If you configure an interface shared by multiple contexts as a source port, traffic passing through the shared interface will be mirrored to the monitor port without distinction of contexts.
The following compatibility matrix shows the support of hardware platforms for port mirroring:
|
Series |
Models |
Port mirroring compatibility |
|
F50X0 series |
F5010, F5020, F5020-GM, F5040, F5000-C, F5000-S |
Yes |
|
F5030, F5030-6GW, F5060, F5080, F5000-A, F5000-M |
Yes only in slot 3 through slot 8. |
|
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
No |
|
F5000-AI series |
F5000-AI-15 |
Yes only on GE 1/0/0 through GE1/0/13 and XGE 1/0/18 through XGE 1/0/19. |
|
F5000-AI-20, F5000-AI-40 |
Yes only in slot 3 through slot 8. |
|
|
F5000-V series |
F5000-V30 |
Yes only in slot 3 through slot 8. |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
No |
|
F1000-AI-20, F1000-AI-30, F1000-AI-50 |
Yes |
|
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
Yes only on interfaces GE 1/0/0 through GE 1/0/23, GE1/0/25, XGE 1/0/26, and XGE 1/0/27. |
|
|
F1000-AI-60, F1000-AI-70, F1000-AI-80, F1000-AI-90 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18 and XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots. |
|
|
F1000-AI-65, F1000-AI-75 |
Yes only on interfaces GE 1/0/0 through GE1/0/23, XGE 1/0/24, and XGE 1/0/25. |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
No |
|
F10X0 series |
F1005, F1010 |
No |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080 |
Yes |
|
|
F1090 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18 and XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots. |
|
|
F1000-V series |
F1000-V50 |
Yes only on interfaces GE 1/0/0 through GE 1/0/23, GE1/0/25, XGE 1/0/26, and XGE 1/0/27. |
|
F1000-V60 |
Yes only on interfaces GE 1/0/0 through GE1/0/23, XGE 1/0/24, and XGE 1/0/25. |
|
|
F1000-V70 |
Yes |
|
|
F1000-V90 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18 and XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots. |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
No |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
No |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332 |
Yes |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
Yes only on interfaces GE 1/0/0 through GE 1/0/23, GE1/0/25, XGE 1/0/26, and XGE 1/0/27. |
|
|
F1000-AK1342, F1000-AK1352, F1000-AK1362 |
Yes only on interfaces GE 1/0/0 through GE1/0/23, XGE 1/0/24, and XGE 1/0/25. |
|
|
F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
Yes only on GE 1/0/0 through GE 1/0/13, XGE 1/0/18 and XGE 1/0/19, GE 1/0/22 through GE 1/0/29, and interfaces on cards in four interface card slots. |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
No |
|
vFW series |
vFW1000, vFW2000 |
No |
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local }
Views
Any view
Predefined user roles
network-admin
network-operator
context-admin
context-operator
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrix shows the value ranges for the mirroring group ID:
|
Series |
Models |
Value range |
|
F50X0 series |
F5010, F5020, F5020-GM, F5030, F5030-6GW, F5040, F5060, F5080, F5000-A, F5000-C, F5000-S, F5000-M |
1 and 2 |
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
Not supported |
|
F5000-AI series |
F5000-AI-15, F5000-AI-20, F5000-AI-40 |
1 and 2 |
|
F5000-V series |
F5000-V30 |
1 and 2 |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
Not supported |
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
1 |
|
|
F1000-AI-20, F1000-AI-30, F1000-AI-50, F1000-AI-60, F1000-AI-65, F1000-AI-70, F1000-AI-75, F1000-AI-80, F1000-AI-90 |
1 and 2 |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
Not supported |
|
F10X0 series |
F1005, F1010 |
Not supported |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1090 |
1 and 2 |
|
|
F1000-V series |
F1000-V50 |
1 |
|
F1000-V70, F1000-V60, F1000-V90 |
1 and 2 |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
Not supported |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
Not supported |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
1 and 2 |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
1 |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
Not supported |
|
vFW series |
vFW1000, vFW2000 |
Not supported |
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1 Inbound
Monitor port: GigabitEthernet1/0/2
Table 1 Command output
|
Field |
Description |
|
Mirroring group |
ID of the mirroring group. |
|
Type |
Type of the mirroring group: Local. |
|
Status |
Status of the mirroring group: · Active—The mirroring group has taken effect. · Incomplete—The mirroring group configuration is not complete and does not take effect. |
|
Mirroring port |
Source port. |
|
Monitor port |
Destination port. |
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to delete mirroring groups.
Syntax
mirroring-group group-id local
undo mirroring-group { group-id | all | local }
Default
No mirroring groups exist.
Views
System view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group ID.
The following compatibility matrix shows the value ranges for the mirroring group ID:
|
Series |
Models |
Value range |
|
F50X0 series |
F5010, F5020, F5020-GM, F5030, F5030-6GW, F5040, F5060, F5080, F5000-A, F5000-C, F5000-S, F5000-M |
1 and 2 |
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
Not supported |
|
F5000-AI series |
F5000-AI-15, F5000-AI-20, F5000-AI-40 |
1 and 2 |
|
F5000-V series |
F5000-V30 |
1 and 2 |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
Not supported |
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
1 |
|
|
F1000-AI-20, F1000-AI-30, F1000-AI-50, F1000-AI-60, F1000-AI-65, F1000-AI-70, F1000-AI-75, F1000-AI-80, F1000-AI-90 |
1 and 2 |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
Not supported |
|
F10X0 series |
F1005, F1010 |
Not supported |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1090 |
1 and 2 |
|
|
F1000-V series |
F1000-V50 |
1 |
|
F1000-V70, F1000-V60, F1000-V90 |
1 and 2 |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
Not supported |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
Not supported |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
1 and 2 |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
1 |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
Not supported |
|
vFW series |
vFW1000, vFW2000 |
Not supported |
local: Specifies local mirroring groups.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
mirroring-group mirroring-port (interface view)
Use mirroring-group mirroring-port to configure a port as a source port for a mirroring group.
Use undo mirroring-group mirroring-port to restore the default.
Syntax
mirroring-group group-id mirroring-port { both | inbound | outbound }
undo mirroring-group group-id mirroring-port
Default
A port does not act as a source port for any mirroring groups.
Views
Interface view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrix shows the value ranges for the mirroring group ID:
|
Series |
Models |
Value range |
|
F50X0 series |
F5010, F5020, F5020-GM, F5030, F5030-6GW, F5040, F5060, F5080, F5000-A, F5000-C, F5000-S, F5000-M |
1 and 2 |
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
Not supported |
|
F5000-AI series |
F5000-AI-15, F5000-AI-20, F5000-AI-40 |
1 and 2 |
|
F5000-V series |
F5000-V30 |
1 and 2 |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
Not supported |
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
1 |
|
|
F1000-AI-20, F1000-AI-30, F1000-AI-50, F1000-AI-60, F1000-AI-65, F1000-AI-70, F1000-AI-75, F1000-AI-80, F1000-AI-90 |
1 and 2 |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
Not supported |
|
F10X0 series |
F1005, F1010 |
Not supported |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1090 |
1 and 2 |
|
|
F1000-V series |
F1000-V50 |
1 |
|
F1000-V70, F1000-V60, F1000-V90 |
1 and 2 |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
Not supported |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
Not supported |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
1 and 2 |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
1 |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
Not supported |
|
vFW series |
vFW1000, vFW2000 |
Not supported |
both: Mirrors both received and sent packets.
inbound: Mirrors only received packets.
outbound: Mirrors only sent packets.
Usage guidelines
A Layer 2 or Layer 3 aggregate interface cannot be configured as a source port for a mirroring group.
A source port cannot be used as a monitor port.
Examples
# Create local mirroring group 1 to monitor the bidirectional traffic of port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mirroring-group 1 mirroring-port both
Related commands
mirroring-group
mirroring-group mirroring-port (system view)
Use mirroring-group mirroring-port to configure source ports for a mirroring group.
Use undo mirroring-group mirroring-port to remove source ports from a mirroring group.
Syntax
mirroring-group group-id mirroring-port interface-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-port interface-list
Default
No source port is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrix shows the value ranges for the mirroring group ID:
|
Series |
Models |
Value range |
|
F50X0 series |
F5010, F5020, F5020-GM, F5030, F5030-6GW, F5040, F5060, F5080, F5000-A, F5000-C, F5000-S, F5000-M |
1 and 2 |
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
Not supported |
|
F5000-AI series |
F5000-AI-15, F5000-AI-20, F5000-AI-40 |
1 and 2 |
|
F5000-V series |
F5000-V30 |
1 and 2 |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
Not supported |
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
1 |
|
|
F1000-AI-20, F1000-AI-30, F1000-AI-50, F1000-AI-60, F1000-AI-65, F1000-AI-70, F1000-AI-75, F1000-AI-80, F1000-AI-90 |
1 and 2 |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
Not supported |
|
F10X0 series |
F1005, F1010 |
Not supported |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1090 |
1 and 2 |
|
|
F1000-V series |
F1000-V50 |
1 |
|
F1000-V70, F1000-V60, F1000-V90 |
1 and 2 |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
Not supported |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
Not supported |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
1 and 2 |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
1 |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
Not supported |
|
vFW series |
vFW1000, vFW2000 |
Not supported |
interface-list: Specifies a space-separated list of up to eight interface items. Each item specifies an interface by its type and number or specifies a range of interfaces in the form of interface-type interface-number1 to interface-type interface-number2. When you specify a range of interfaces, the interfaces must be of the same type and on the same slot. The start interface number must be identical to or lower than the end interface number.
both: Mirrors both received and sent packets.
inbound: Mirrors only received packets.
outbound: Mirrors only sent packets.
Usage guidelines
A Layer 2 or Layer 3 aggregate interface cannot be configured as a source port for a mirroring group.
A source port cannot be used as a monitor port.
Examples
# Create local mirroring group 1 to monitor the bidirectional traffic of GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 mirroring-port gigabitethernet 1/0/1 both
mirroring-group
mirroring-group monitor-port (interface view)
Use mirroring-group monitor-port to configure a port as the monitor port for a mirroring group.
Use undo mirroring-group monitor-port to restore the default.
Syntax
mirroring-group group-id monitor-port
undo mirroring-group group-id monitor-port
Default
A port does not act as the monitor port for any mirroring groups.
Views
Interface view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrix shows the value ranges for the mirroring group ID:
|
Series |
Models |
Value range |
|
F50X0 series |
F5010, F5020, F5020-GM, F5030, F5030-6GW, F5040, F5060, F5080, F5000-A, F5000-C, F5000-S, F5000-M |
1 and 2 |
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
Not supported |
|
F5000-AI series |
F5000-AI-15, F5000-AI-20, F5000-AI-40 |
1 and 2 |
|
F5000-V series |
F5000-V30 |
1 and 2 |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
Not supported |
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
1 |
|
|
F1000-AI-20, F1000-AI-30, F1000-AI-50, F1000-AI-60, F1000-AI-65, F1000-AI-70, F1000-AI-75, F1000-AI-80, F1000-AI-90 |
1 and 2 |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
Not supported |
|
F10X0 series |
F1005, F1010 |
Not supported |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1090 |
1 and 2 |
|
|
F1000-V series |
F1000-V50 |
1 |
|
F1000-V70, F1000-V60, F1000-V90 |
1 and 2 |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
Not supported |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
Not supported |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
1 and 2 |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
1 |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
Not supported |
|
vFW series |
vFW1000, vFW2000 |
Not supported |
Usage guidelines
Do not enable the spanning tree feature on the monitor port of a mirroring group.
A Layer 2 or Layer 3 aggregate interface cannot be configured as the monitor port for a mirroring group.
Use a monitor port only for port mirroring, so the data monitoring device receives and analyzes only the mirrored traffic.
The member port of an existing mirroring group cannot be configured as a monitor port.
Examples
# Create local mirroring group 1 and configure GigabitEthernet 1/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mirroring-group 1 monitor-port
Related commands
mirroring-group
mirroring-group monitor-port (system view)
Use mirroring-group monitor-port to configure the monitor ports for a mirroring group.
Use undo mirroring-group monitor-port to remove the monitor ports from a mirroring group.
Syntax
mirroring-group group-id monitor-port interface-type interface-number
undo mirroring-group group-id monitor-port interface-type interface-number
Default
No monitor port is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
context-admin
Parameters
group-id: Specifies a mirroring group by its ID.
The following compatibility matrix shows the value ranges for the mirroring group ID:
|
Series |
Models |
Value range |
|
F50X0 series |
F5010, F5020, F5020-GM, F5030, F5030-6GW, F5040, F5060, F5080, F5000-A, F5000-C, F5000-S, F5000-M |
1 and 2 |
|
F5000-CN series |
F5000-CN30, F5000-CN60 |
Not supported |
|
F5000-AI series |
F5000-AI-15, F5000-AI-20, F5000-AI-40 |
1 and 2 |
|
F5000-V series |
F5000-V30 |
1 and 2 |
|
F1000-AI series |
F1000-AI-05, F1000-AI-10, F1000-AI-15 |
Not supported |
|
F1000-AI-25, F1000-AI-35, F1000-AI-55 |
1 |
|
|
F1000-AI-20, F1000-AI-30, F1000-AI-50, F1000-AI-60, F1000-AI-65, F1000-AI-70, F1000-AI-75, F1000-AI-80, F1000-AI-90 |
1 and 2 |
|
|
F1000-L series |
F1003-L, F1005-L, F1010-L |
Not supported |
|
F10X0 series |
F1005, F1010 |
Not supported |
|
F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1090 |
1 and 2 |
|
|
F1000-V series |
F1000-V50 |
1 |
|
F1000-V70, F1000-V60, F1000-V90 |
1 and 2 |
|
|
F1000-SASE series |
F1000-SASE100, F1000-SASE200 |
Not supported |
|
F1000-AK series |
F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1010, F1000-AK1020, F1000-AK1030, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140, F1000-AK1150, F1000-AK1160, F1000-AK1170, F1000-AK1180, F1000-AK9110, F1000-AK9210 |
Not supported |
|
F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-GM-AK370, F1000-GM-AK380, F1000-AK711, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332, F1000-AK1342, F1000-AK1352, F1000-AK1362, F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614 |
1 and 2 |
|
|
F1000-AK1242, F1000-AK1252, F1000-AK1262, F1000-AK1272 |
1 |
|
|
Modules |
IM-NGFWX-IV, LSPM6FWD, LSPM6FWDB, LSQM1FWDSC0, LSQM2FWDSC0, LSU3FWCEA0, LSUM1FWCEAB0, LSUM1FWDEC0, LSWM1FWD0, LSX1FWCEA1, LSXM1FWDF1 |
Not supported |
|
vFW series |
vFW1000, vFW2000 |
Not supported |
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Do not enable the spanning tree feature on the monitor port of a mirroring group.
Use a monitor port only for port mirroring, so the data monitoring device receives only the mirrored traffic.
The member port of an existing mirroring group cannot be configured as a monitor port.
Examples
# Create local mirroring group 1 and configure GigabitEthernet 1/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 monitor-port gigabitethernet 1/0/1
Related commands
mirroring-group
