Feature navigator

Network Interfaces

Interfaces

·     Display interfaces and their attributes, including:

¡     Interface status.

¡     IP address.

¡     Speed and duplex mode.

¡     Interface description.

·     Delete logical interfaces.

·     Modify interfaces.

Link Aggregation

Create, modify, or delete Layer 2 aggregation groups.

VLAN

VLAN

·     Configure port-based VLANs.

·     Create VLAN-interfaces.

MAC

·     Create or delete static MAC entries, dynamic MAC entries, and blackhole MAC entries.

·     Display existing MAC entries.

STP

·     Enable or disable STP globally or on a specific interface

·     Set the STP, RSTP, MSTP, or PVST mode

·     Configure instance priorities

·     Configure MST regions

Network Routing

Routing Table

Display IPv4 and IPv6 routing table information, including brief routing table information and route statistics.

Static Routing

·     Display IPv4 and IPv6 static routing entries.

·     Create, modify, or delete IPv4 and IPv6 static routing entries.

Network Services-IP Services

IP

·     Configure the method to obtain an IP address (DHCP or static).

·     Configure the IP address or MTU of an interface.

·     Create a loopback interface.

IPv6

·     Configure the method to obtain an IPv6 address (manual assignment, dynamic assignment, or auto generation).

·     Configure the IPv6 address of an interface.

·     Create a loopback interface.

Network Services-DHCP/DNS

DHCP

·     Configure DHCP server functions, including:

¡     Configure DHCP services.

¡     Configure the interface to operate in the DHCP server mode.

¡     Configure DHCP address pools.

¡     Configure IP address conflict detection.

·     Configure DHCP relay agent functions, including:

¡     Configure DHCP services.

¡     Configure the DHCP relay agent mode.

¡     Configure the IP address of the DHCP server.

·     Configure settings for DHCP relay entry, include:

¡     Recording of DHCP relay entries.

¡     Periodic refreshing of DHCP relay entries.

¡     Interval for refreshing DHCP relay entries.

IPv4 DNS

·     Configure IPv4 static domain name resolution.

·     Configure IPv4 dynamic domain name resolution.

·     Configure the DNS proxy.

·     Configure IPv4 domain name suffixes.

IPv6 DNS

·     Configure static and dynamic IPv6 domain name resolution.

·     Configure the IPv6 DNS proxy.

·     Configure IPv6 domain name suffixes.

Network Services-Multicast

IGMP Snooping

Configure IGMP snooping functions, including:

·     Enable or disable IGMP snooping in a VLAN.

·     Query IGMP snooping entries.

·     Enable dropping unknown multicast data.

·     Configure the IGMP snooping querier.

·     Enable fast-leave processing.

·     Set the maximum number of multicast groups on a port.

MLD Snooping

Configure MLD snooping functions, including:

·     Enable or disable MLD snooping in a VLAN.

·     Query MLD snooping entries.

·     Enable dropping unknown IPv6 multicast data.

·     Configure the MLD snooping querier.

·     Enable fast-leave processing.

·     Set the maximum number of IPv6 multicast groups on a port.

Network Services-ARP

ARP

·     Add static ARP entries.

·     Delete dynamic ARP entries and static ARP entries.

·     Configure the ARP proxy.

·     Configure gratuitous ARP.

·     Configure ARP attack protection.

Network Services-ND

ND

·     Add static ND entries.

·     Delete dynamic ND entries and static ND entries.

·     Configure the aging time for stale ND entries.

·     Enable or disable link local ND entry minimization.

·     Configure hop limit.

·     Configure RA prefix attributes, including:

¡     Address prefix.

¡     Prefix length.

¡     Valid lifetime.

¡     Preferred lifetime.

·     Configure RA settings for an interface, including:

¡     RA message suppression.

¡     Maximum and minimum intervals for sending RA messages.

¡     M-flag.

¡     MTU option.

¡     Hop limit.

¡     O-flag.

¡     Router lifetime.

¡     NS message retransmit interval.

¡     Router preference.

¡     Neighbor reachable time.

·     Enable common and local ND proxy on an interface.

·     Configure ND rules for the interface, including:

¡     Maximum number of dynamic neighbor entries.

¡     Maximum number of DAD attempts.

Management Protocols

HTTP/HTTPS

·     Enable or disable HTTP service.

·     Enable or disable HTTPS service.

·     Set the Web connection timeout.

·     Set the HTTP service port number.

·     Set the HTTPS service port number.

·     Specify Web access control ACLs.

Telnet

·     Enable or disable Telnet service.

·     Set the DSCP values for the device to use for outgoing IPv4 or IPv6 Telnet packets.

·     Specify Telnet access control ACLs.

SSH

·     Enable or disable the Stelnet, SFTP, and SCP services.

·     Configure SSH parameters.

NTP

·     Enable or disable the NTP service.

·     Configure the IP address and stratum level of the local clock.

·     Set an NTP authentication key.

LLDP

·     Enable or disable LLDP.

·     Enable or disable CDP compatibility.

·     Configure LLDP parameters.

·     Display interface status.

·     Configure the interface status.

·     Display LLDP neighbors.

·     Configure LLDP to advertise the specified TLVs.

Settings

·     Enable or disable log output to the log buffer, and configure the maximum number of logs in the log buffer.

·     Configure the address and port number of log hosts.

Packet Filter

Packet Filter

·     Create, modify, or delete a packet filter for an interface.

·     Configure the default action for the packet filter.

Traffic Policy

QoS Policies

Create, modify, or delete interface QoS policies.

Priority Mapping

·     Query or configure the port priority.

·     Configure the priority trust mode for a port.

·     Query or modify the priority mapping table.

Access Control

802.1X

·     Enable or disable 802.1X.

·     Configure the 802.1X authentication method.

·     Configure the port access control method.

·     Configure the maximum number of concurrent 802.1X users on the port.

·     Configure advanced 802.1X features.

Authentication

ISP Domains

·     Add, modify, or delete ISP domains.

·     Configure the domain name, state, access method, and advanced settings for an IPS domain.

·     Configure the default ISP domain.

RADIUS

·     Add, modify, or delete RADIUS schemes.

·     Configure the scheme name, authentication server, accounting server, shared key, and advanced settings.

·     Enable or disable receiving of session control packets.

User Management

Local Users

·     Add, modify, or delete local users.

·     Add, modify, or delete local user groups.

Event Logs

Event Logs

Query, collect, or delete log information.

Resource

IPv4 ACL

·     Create, modify, or delete an IPv4 basic ACL.

·     Create, modify, or delete an IPv4 advanced ACL.

IPv6 ACL

·     Create, modify, or delete an IPv6 basic ACL.

·     Create, modify, or delete an IPv6 advanced ACL.

Layer 2 ACLs

Create, modify, or delete an Ethernet frame header ACL.

Time range

Create, modify, or delete a time range.

File Systems

File System Management

Upload, download, or delete files.

Administrators

Administrators

·     Create, modify, or delete roles.

·     Create, modify, or delete administrators.

·     Configure the role of administrators.

·     Control administrator access authority.

·     Manage passwords.

Management

Settings

·     Set the name, location, and contact information of the device.

·     Set the system time.

Configuration

·     Save or export the running configuration.

·     Import configuration.

·     Display the running configuration.

·     Restore the settings to the factory defaults.

Upgrade

·     Upgrade system software.

·     Display system software lists, including:

¡     List of software enabled at the current system startup.

¡     List of main software to be enabled at the next system startup.

Reboot

Reboot the device.

About

Display basic device information, including device name, serial number, model, description, location, contact information, version, electronic label, and statement.

Debug

Diagnostics

Collect diagnostic information for locating problems.

Ping

IPv4 Ping

Identify whether an IPv4 address is reachable.

IPv6 Ping

Identify whether an IPv6 address is reachable.

Tracert

IPv4 Tracert

Trace the path of IPv4 packets from source to destination.

IPv6 Tracert

Trace the path of IPv6 packets from source to destination.

Add New AP

Add New AP

Add new APs manually.

Add New SSID

Add New SSID

·     Configure wireless services.

·     Configure link layer authentication.

·     Enable or disable authorization.

·     Enable or disable intrusion detection.

·     Configure key management.

·     Bind APs.

Add New User

Add New User

Add new users.

Wireless Networks

Wireless Services

Display wireless services.

Access Points

APs

Display AP statistics.

AP Groups

Display AP groups.

Clients

Clients

Display client statistics.

Wireless Security

WIPS

Display WIPS statistics.

RRM

RF Optimization

Display channel and power adjustment information.

Application Monitoring

Bonjour

·     Display Bonjour service information discovered by Bonjour gateways.

·     Clear Bonjour service resource information.

Multicast Optimization

Display IPv4 and IPv6 multicast statistics.

Wireless Networks

Wireless Networks

·     Display wireless services.

·     Add, delete, or modify wireless services.

·     Configure link layer authentication.

·     Enable or disable authorization and intrusion detection.

·     Manage keys.

·     Bind APs.

·     Configure access control.

AP Management

AP

Add, modify, delete, or query APs.

AP Groups

Create, query, modify, or delete AP groups.

AP Global Settings

·     Configure AP region codes.

·     Enable or disable region code lock.

·     Enable or disable AP software upgrade.

·     Enable or disable auto AP.

·     Enable or disable auto-AP persistence.

Wireless QoS

Client Rate Limiting

·     Display detailed information about client rate limit.

·     Configure client-type-based client rate limit.

·     Configure service-based client rate limit.

·     Configure AP radio or AP group radio-based client rate limit.

Bandwidth Guaranteeing

·     Display detailed information about intelligent bandwidth guarantee.

·     Set the maximum radio bandwidth.

·     Configure intelligent bandwidth guarantee for an AP or AP group.

Wi-Fi Multimedia

·     Display wireless QoS status and information.

·     Display radio EDCA parameters.

·     Display radio and client negotiation parameters.

·     Display WMM statistics for clients.

·     Display transport stream information.

Wireless Security

WIPS

·     Display detailed WIPS information.

·     Enable WIPS.

·     Configure VSDs.

·     Configure classification policies.

·     Configure attack detection policies.

·     Configure signature policies.

·     Configure countermeasure policies.

·     Configure AP classification rules.

·     Configure signatures.

·     Add MAC addresses to the alarm-ignored device list.

Whitelist and blacklist

·     Configure whitelists.

·     Configure static and dynamic blacklists.

Radio Management

Radio Configuration

Display detailed model and radio information for all APs in an AP group.

RRM

·     Display channel and power adjustment information.

·     One-key channel and power optimization.

·     Configure RRM for APs and AP groups:

¡     Configure RRM holddown groups.

¡     Configure radio baselines.

·     Display RRM adjustment history.

Load Balancing

·     Enable load balancing.

·     Configure the load balancing mode.

·     Configure load balancing groups.

·     Configure load balancing parameters.

Band Navigation

·     Enable or disable global band navigation.

·     Enable or disable band navigation for APs and AP groups.

·     Configure band navigation parameters.

Applications

Multicast Optimization

·     Display IPv4 multicast optimization.

·     Configure IPv4 multicast optimization.

·     Display IPv6 multicast optimization.

·     Configure IPv6 multicast optimization.

Bonjour

·     Enable or disable the Bonjour gateway feature.

·     Create and activate Bonjour service types.

·     Change the Bonjour gateway mode.

·     Configure Bonjour policies.

Packet Filter

Packet Filter

·     Create, modify, or delete a packet filter for an interface.

·     Configure the default action for the packet filter.

Traffic Policy

QoS Policies

Create, modify, or delete interface QoS policies.

Priority Mapping

·     Query and configure the port priority.

·     Configure the priority trust mode for a port.

·     Query and modify the priority mapping table.

Access Control

802.1X

·     Enable or disable 802.1X.

·     Configure the 802.1X authentication method.

·     Configure the port access control method.

·     Configure the maximum number of concurrent 802.1X users on the port.

·     Configure advanced 802.1X features.

Authentication

ISP Domains

·     Add, modify, or delete ISP domains.

·     Configure the domain name, state, access method, and advanced settings of an IPS domain.

·     Configure the default ISP domain.

RADIUS

·     Add, modify, or delete RADIUS schemes.

·     Configure the scheme name, authentication server, accounting server, shared key, and advanced settings.

·     Enable or disable receiving of session control packets.

User Management

Local Users

·     Add, modify, or delete local users.

·     Add or modify local user groups.

Guest Management

Guest List

Query, add, or export guests.

Import Guests

Import guests.

Generate Guest Accounts

Generate guests in bulk.

Approve Guest

Approve guests.

Guest Configuration

Configure guest parameters.

Access Control

MAC Authentication

·     Enable or disable MAC authentication.

·     Enable MAC authentication for an interface and set the maximum number of concurrent MAC authentication users on a port.

·     Configure the quiet timer.

·     Configure advanced MAC authentication settings.

Port Security

·     Enable or disable port security.

·     Specify the port security mode.

·     Configure advanced port security settings.

Portal

·     Configure the portal authentication server.

·     Configure the portal Web server.

·     Configure the local portal Web server.

·     Configure portal-free rules.

·     Configure interface policies.

·     Configure online user information.

Resource

IPv4 ACL

·     Create basic or advanced IPv4 ACLs.

·     Modify or delete ACLs on this page and other service module pages, such as the packet filtering page.

IPv6 ACL

·     Create basic or advanced IPv6 ACLs.

·     Modify or delete ACLs on this page and other service module pages, such as the packet filtering page.

Layer 2 ACLs

·     Create Ethernet ACLs.

·     Modify or delete ACLs on this page and other service module pages, such as the packet filtering page.

Time range

Create, modify, or delete time ranges.

Wireless Capture

Wireless Capture

Display captured wireless packets.

Debug

Diagnostics

Collect diagnostic information for locating problems.

Client Statistics

AC Frame

Display transmitted/received/dropped AC frames.

AC Bytes

Display transmitted/received/dropped AC bytes.

Total Frame

Display total transmitted, received, and dropped frames.

Total Bytes

Display total transmitted, received, and dropped bytes.

AP Statistics

AP Statistics

Display AP statistics.

Wireless Service Statistics

Wireless Service Statistics

Display wireless service statistics.