Clients

Clients Info

View client statistics information.

Access Category Frames

Display client packet statistics information by frame or byte.

Access Category Bytes

Total Frames

Total Bytes

Wireless Networks

Wireless Services

View wireless services.

Wireless Service Statistics

View wireless service statistics information.

Access Points

APs

View AP statistics information.

AP Groups

View AP groups.

APs Statistics

Display AP statistics information.

RF Monitoring

RRM

Display radio channel and power adjustment information.

Spectrum Analysis

Display detailed information about spectrum analysis.

Wireless Security

WIPS

Display WIPS statistics information.

Application Monitoring

Bonjour

·     Display information about Bonjour services detected by the Bonjour gateway.

·     Clear Bonjour service resource information.

Multicast Optimization

Display IPv4/IPv6 multicast statistics information.

Client Proximity Sensor

Display user information.

Add AP

Manually add new APs.

Add Wireless Services

·     Configure wireless services.

·     Configure link layer authentication.

·     Enable or disable authorization and intrusion detection.

·     Manage keys.

·     Bind APs.

Add User

Add a new user.

Wireless Services

Wireless Services Configuration

·     Display wireless services.

·     Add, delete, or modify wireless services.

·     Configure link layer authentication.

·     Enable or disable authorization and intrusion detection.

·     Manage keys.

·     Bind APs and AP groups.

·     Configure access control.

AP Management

AP

Add, modify, delete, or query APs, add APs to AP groups, rename APs, bind wireless services to radios, or configure AC backup.

AP Groups

Create, query, modify, or delete AP groups.

AP Global Settings

·     Configure AP region codes.

·     Enable or disable region code lock.

·     Enable or disable AP software upgrade.

·     Enable or disable auto AP.

·     Enable or disable auto-AP persistence.

AP Provisioning

Display, modify, load, or unload AP provisioned configuration.

AP Group Provisioning

Display, modify, or unload AP group provisioned configuration.

Wireless QoS

Client Rate Limit

·     Display detailed information about client rate limit.

·     Configure client-type-based client rate limit.

·     Configure service-based client rate limit.

·     Configure AP radio or AP group radio-based client rate limit.

Bandwidth Guarantee

·     Display bandwidth guarantee details.

·     Set the maximum radio bandwidth.

·     Configure AP- or AP group-based bandwidth guarantee.

Wi-Fi Multimedia

·     Display or configure wireless QoS status and information.

·     Display or configure radio EDCA parameters.

·     Display or configure radio and client negotiation parameters.

·     Display WMM statistics for clients.

·     Display transport stream information.

Radio Management

Radio Configuration

Display or modify model and radio information for all APs in an AP group.

RRM

·     Display radio channel and power adjustment information.

·     Optimize channels and powers through one click.

·     Set the channel or power calibration interval.

·     Configure RRM for APs or AP groups.

·     Configure RRM holddown groups.

·     Configure baselines.

·     Display RRM history calibration information.

Spectrum Analysis

·     Enable spectrum analysis.

·     Configure interference device types.

·     Import interference device feature database file.

·     Configure notifications.

Load Balancing

·     Enable load balancing.

·     Configure the load balancing mode.

·     Configure load balancing groups.

·     Configure load balancing parameters.

Band Navigation

·     Enable or disable global band navigation.

·     Enable or disable band navigation for APs and AP groups.

·     Configure band navigation parameters.

Wireless Security

WIPS

·     Display detailed WIPS information.

·     Enable WIPS.

·     Configure VSDs.

·     Configure classification policies.

·     Configure attack detection policies.

·     Configure signature policies.

·     Configure countermeasure policies.

·     Configure AP classification rules.

·     Configure signatures.

·     Add MAC addresses to the alarm-ignored device list.

Allowlist and denylist

·     Configure allowlists.

·     Configure static and dynamic denylists.

Mobility Domain

Roaming

·     Display WLAN client roaming information and roaming group information.

·     Create roaming groups.

Portal Roaming Center

·     Enable or disable the portal roaming center.

·     Enable or disable user network access prohibition.

·     Configure the address and UDP port number of the portal roaming center, WLAN roaming center response timeout, and maximum packet transmission attempts for the portal roaming center.

Applications

Mesh Services

Configure mesh services.

Multicast Optimization

·     Configure and display IPv4 multicast optimization settings.

·     Configure and display IPv6 multicast optimization settings.

Location Aware

·     Configure global packet rate limit, packet filtering, and packet dilution.

·     Configure Aeroscout location, BLE location, CUPID location, fingerprint location, and IoT location.

Bonjour

·     Enable or disable Bonjour gateway.

·     Create and activate Bonjour service types.

·     Switch the Bonjour gateway mode.

·     Configure Bonjour policies.

Client Proximity Sensor

·     Enable and disable client probing.

·     View client probing information.

Network Interfaces

Interfaces

·     Display interfaces and their attributes, including:

¡     Interface status.

¡     IP address.

¡     Speed and duplex mode.

¡     Interface description.

·     Delete logical interfaces.

·     Modify interfaces.

·     Restore the default configuration.

Link Aggregation

Create, modify, or delete Layer 2 aggregation groups.

PPPoE

Add, delete, or modify PPPoE clients.

Link

VLAN

·     Configure port-based VLANs.

·     Create VLAN-interfaces.

·     Modify or delete VLANs.

VLAN Groups

Create, modify, or delete VLAN groups.

MAC

·     Create or delete static MAC entries, dynamic MAC entries, and blackhole MAC entries.

·     Display existing MAC entries.

STP

·     Enable or disable STP globally.

·     Enable or disable STP on interfaces.

·     Configure the STP operating mode as STP, RSTP, PVST, or MSTP.

·     Configure instance priorities.

·     Configure MST regions.

DHCP Snooping

·     Configure a port as a trusted or untrusted port.

·     Record and back up DHCP snooping entries.

·     Configure the following features for DHCP snooping ports:

¡     MAC address check.

¡     DHCP-REQUEST check.

¡     DHCP packet rate limit.

¡     Max DHCP snooping entries.

·     Enable support for Option 82. If Option 82 is enabled, you can configure the handling strategy, the padding format, and the padding contents for Option 82.

Network Routing

Routing Table

Display IPv4 and IPv6 routing table information, including brief routing table information and route statistics.

Static Routing

·     Display IPv4 and IPv6 static routing entries.

·     Create, modify, or delete IPv4 and IPv6 static routing entries.

RIP

·     Enable RIP.

·     Configure subnets and interfaces.

PBR

·     Display IPv4 and IPv6 policy-based routing.

·     Create, modify, and delete IPv4 and IPv6 policy-based routes.

IP

NAT

·     Configure dynamic and static NAT, internal servers, and dynamic and static NAT444.

·     Configure NAT address groups, NAT444 address groups, port block groups, and server groups.

·     Configure PAT mode, DNS mappings, and NAT hairpin.

·     Enable NAT ALG.

·     Display NAT logs.

IP

·     Configure the method to obtain an IP address (DHCP or static).

·     Configure the IP address or MTU of an interface.

·     Create a loopback interface.

ARP

·     Add static ARP entries.

·     Delete dynamic ARP entries and static ARP entries.

·     Configure the ARP proxy.

·     Configure gratuitous ARP.

·     Configure ARP attack protection.

·     Configure ARP entry persistence.

IPv4 DNS

·     Configure IPv4 static domain name resolution.

·     Configure IPv4 dynamic domain name resolution.

·     Configure the DNS proxy.

·     Configure IPv4 domain name suffixes.

Dynamic DNS

·     Manage dynamic DNS policies.

·     Configure interfaces for dynamic DNS policies.

IPv6

IPv6

·     Configure the method to obtain an IPv6 address (manual assignment, dynamic assignment, or auto generation).

·     Configure the IPv6 address of an interface.

·     Create a loopback interface.

ND

·     Add static ND entries.

·     Delete dynamic ND entries and static ND entries.

·     Configure the aging time for stale ND entries.

·     Enable or disable link local ND entry minimization.

·     Configure hop limit.

·     Configure RA prefix attributes, including:

¡     Address prefix.

¡     Prefix length.

¡     Valid lifetime.

¡     Preferred lifetime.

·     Configure RA settings for an interface, including:

¡     RA message suppression.

¡     Maximum and minimum intervals for sending RA messages.

¡     M-flag.

¡     MTU option.

¡     Hop limit.

¡     O-flag.

¡     Router lifetime.

¡     NS message retransmit interval.

¡     Router preference.

¡     Neighbor reachable time.

·     Enable common and local ND proxy on an interface.

·     Configure ND rules for the interface, including:

¡     Maximum number of dynamic neighbor entries.

¡     Maximum number of DAD attempts.

IPv6 DNS

·     Configure static and dynamic IPv6 domain name resolution.

·     Configure the IPv6 DNS proxy.

·     Configure IPv6 domain name suffixes.

VPN

IPsec

·     Create, modify, and delete IPsec policies.

·     Display and clear IPsec tunnels.

·     Configure advanced IPsec settings.

Multicast

IGMP Snooping

Configure IGMP snooping functions, including:

·     Enable or disable IGMP snooping in a VLAN.

·     Query IGMP snooping entries.

·     Enable dropping unknown multicast data.

·     Configure the IGMP snooping querier.

·     Enable fast-leave processing.

·     Set the maximum number of multicast groups on a port.

MLD Snooping

Configure MLD snooping functions, including:

·     Enable or disable MLD snooping in a VLAN.

·     Query MLD snooping entries.

·     Enable dropping unknown IPv6 multicast data.

·     Configure the MLD snooping querier.

·     Enable fast-leave processing.

·     Set the maximum number of IPv6 multicast groups on a port.

Management Protocols

DHCP

·     Configure DHCP server functions.

·     Configure DHCP services.

¡     Configure the interface to operate in the DHCP server mode.

¡     Configure DHCP address pools.

¡     Configure IP address conflict detection.

·     Configure DHCP relay agent functions.

¡     Configure DHCP services.

¡     Configure the DHCP relay agent mode, and configure the IP address of the DHCP server.

·     Configure settings for DHCP relay entry, include:

¡     Recording of DHCP relay entries.

¡     Periodic refreshing of DHCP relay entries.

¡     Interval for refreshing DHCP relay entries.

HTTP/HTTPS

·     Enable or disable HTTP service.

·     Enable or disable HTTPS service.

·     Set the Web connection timeout.

·     Set the HTTP service port number.

·     Set the HTTPS service port number.

·     Specify Web access control ACLs.

FTP

·     Enable or disable FTP service.

·     Set the DSCP value for the device to use for outgoing FTP packets.

·     Specify FTP access control ACLs.

·     Set the FTP connection idle timeout.

·     Configure SSL service policies.

Telnet

·     Enable or disable Telnet service.

·     Set the DSCP values for the device to use for outgoing IPv4 or IPv6 Telnet packets.

·     Specify Telnet access control ACLs.

SSH

·     Enable or disable the Stelnet, SFTP, and SCP services.

·     Configure SSH parameters.

NTP

·     Enable or disable the NTP service.

·     Configure the IP address and stratum level of the local clock.

·     Set an NTP authentication key.

LLDP

·     Enable or disable LLDP.

·     Enable or disable CDP compatibility.

·     Configure LLDP parameters.

·     Display interface status.

·     Configure the interface status.

·     Display LLDP neighbors.

·     Configure LLDP to advertise the specified TLVs.

Traffic Policy

Packet Filter

·     Create, modify, or delete a packet filter for an interface.

·     Configure the default action for the packet filter.

QoS Policies

·     Create, modify, or delete interface QoS policies.

Priority Mapping

·     Query or configure the port priority.

·     Configure the priority trust mode for a port.

·     Query or modify the priority mapping table.

Access Control

IPv4 ACL

·     Create IPv4, IPv6, and Layer 2 ACLs.

·     Modify and delete ACLs created on the current page and the pages of other service modules such as packet filter.

IPv6 ACL

Layer 2 ACL

Authentication

MAC Authentication

Configure MAC address authentication.

802.1X

·     Enable or disable 802.1X.

·     Configure the 802.1X authentication method.

·     Configure the port access control method.

·     Configure the maximum number of concurrent 802.1X users on the port.

·     Configure advanced 802.1X features.

Portal

Configure portal authentication.

Port Security

Configure port security.

AAA

ISP Domains

Configure ISP domains.

RADIUS

Configure RADIUS schemes.

User Management

Local Users

·     Add, modify, or delete local users.

·     Add, modify, or delete local user groups.

Guest Management

Guest List

Guest List

Import Guests

Import guests.

Generate Guest Accounts

Generate guest accounts in bulk.

Approve Guest

Approve guest accounts.

Guest Configuration

Configure guest parameters.

BYOD

BYOD Rules

Display and configure DHCP rules, HTTP rules, and MAC rules.

BYOD Authorization

Query or modify BYOD authorization.

Application Groups

Application Groups

·     Create, modify, and delete applications in an application group

·     Query the application group to which an application belongs

Object Groups

Service Object Groups

·     Create, modify, and delete service objects.

·     Create, modify, and delete service object groups.

·     Query the service object group to which a service object belongs.

IPv4 Address Object Groups

·     Create, modify, and delete IPv4 address objects.

·     Create, modify, and delete IPv4 address object groups.

IPv6 Address Object Groups

·     Create, modify, and delete IPv6 address objects.

·     Create, modify, and delete IPv6 address object groups.

Security Actions

Block

Configure the packet block duration for each DPI service module.

Redirect

Configure the redirection URL for each DPI service module.

Capture

Configure the capture action parameters for the IPS service module.

Security Policies

Security Policies

Configure security policies to filter packets matching specific criteria.

Application Audit

Audit Policies

·     Create, modify, and delete audit policies.

·     Configure the policy type, filtering criteria, and matching rules.

Rate Limit

Rate Limit

·     Create, modify, and delete application rate limit rules.

·     Specify the rated limit.

IPS

Profiles

·     Create, modify, and delete IPS profiles.

·     Configure the protected objects, severity level, protection action, and excluded list.

Signatures

Import and delete Snort signature files.

URL Filtering

URL Categories

·     Configure the cloud server state.

·     Create customized URL filtering categories.

·     Enable cloud searching of URL filtering categories.

URL Filtering Profiles

·     Create, modify, and delete URL filtering profiles.

·     Configure URL filtering categories, action bindings, and default action.

Anti-Virus

Profile

·     Configure the anti-virus profile

·     Configure excluded viruses and applications.

Log

Event Logs

Query, collect, or delete log information.

LogSettings

Export system logs to the log cache partition or log host.

Resource

Time Range

Create, modify, or delete a time range.

File Systems

File System Management

Upload, download, or delete files.

License Management

License Configuration

Add license file.

Obtain DID

Export DID.

Licenses and features

View whether features are licensed.

Compress

Compress license files.

Management

Administrators

·     Create, modify, or delete roles.

·     Create, modify, or delete administrators.

·     Configure the role of administrators.

·     Control administrator access authority.

·     Manage passwords.

Settings

·     Set the name, location, and contact information of the device.

·     Set the system time.

Configuration

·     Save or export the running configuration.

·     Import configuration.

·     Display the running configuration.

·     Restore the settings to the factory defaults.

Upgrade

·     Upgrade system software.

·     Display system software lists, including:

¡     List of software enabled at the current system startup.

¡     List of main software to be enabled at the next system startup.

Reboot

Reboot the device.

About

Display basic device information, including device name, serial number, model, description, location, contact information, version, electronic label, and statement.

Debug

Diagnostics

Collect diagnostic information for locating problems.

Ping

IPv4 Ping

Identify whether an IPv4 address is reachable.

IPv6 Ping

Identify whether an IPv6 address is reachable.

RF Ping

Check wireless link quality.

Tracert

IPv4 Tracert

Trace the path of IPv4 packets from source to destination.

IPv6 Tracert

Trace the path of IPv6 packets from source to destination.

Packet Capture

Wireless Packet Capture

Display the wireless packet capture list.