Contents

Connection limit commands· 1

connection-limit 1

connection-limit apply· 1

connection-limit apply global 2

description· 3

display connection-limit 4

display connection-limit ipv6-stat-nodes· 6

display connection-limit statistics· 9

display connection-limit stat-nodes· 10

limit 12

reset connection-limit statistics· 15

 

Connection limit commands

connection-limit

Use connection-limit to create a connection limit policy and enter its view, or enter the view of an existing connection limit policy.

Use undo connection-limit to delete a connection limit policy.

Syntax

connection-limit { ipv6-policy | policy } policy-id

undo connection-limit { ipv6-policy | policy } policy-id

Default

No connection limit policies exist.

Views

System view

Predefined user roles

network-admin

Parameters

ipv6-policy: Specifies an IPv6 connection limit policy.

policy: Specifies an IPv4 connection limit policy.

policy-id: Specifies the ID of a connection limit policy, in the range of 1 to 32. An IPv4 or IPv6 connection limit policy has its own number.

Examples

# Create IPv4 connection limit policy 1 and enter its view.

<Sysname> system-view

[Sysname] connection-limit policy 1

[Sysname-connlmt-policy-1]

# Create IPv6 connection limit policy 12 and enter its view.

<Sysname> system-view

[Sysname] connection-limit ipv6-policy 12

[Sysname-connlmt-ipv6-policy-12]

Related commands

connection-limit apply

connection-limit apply global

display connection-limit

limit

connection-limit apply

Use connection-limit apply to apply a connection limit policy to an interface.

Use undo connection-limit apply to remove a connection limit policy from an interface.

Syntax

connection-limit apply { ipv6-policy | policy } policy-id

undo connection-limit apply { ipv6-policy | policy }

Default

No connection limit policy is applied to an interface.

Views

Interface view

Predefined user roles

network-admin

Parameters

ipv6-policy: Specifies an IPv6 connection limit policy.

policy: Specifies an IPv4 connection limit policy.

policy-id: Specifies the ID of a connection limit policy, in the range of 1 to 32.

Usage guidelines

Only one IPv4 connection limit policy and one IPv6 connection limit policy can be applied to an interface. A new IPv4 or IPv6 connection limit policy overwrites the old one.

Examples

# Apply IPv4 connection limit policy 1 to VLAN-interface 2.

<Sysname> system-view

[Sysname] interface vlan-interface 2

[Sysname-Vlan-interface2] connection-limit apply policy 1

# Apply IPv6 connection limit policy 12 to VLAN-interface 2.

<Sysname> system-view

[Sysname] interface vlan-interface 2

[Sysname-Vlan-interface2] connection-limit apply ipv6-policy 12

Related commands

connection-limit

limit

connection-limit apply global

Use connection-limit apply global to apply a connection limit policy globally.

Use undo connection-limit apply global to remove the application.

Syntax

connection-limit apply global { ipv6-policy | policy } policy-id

undo connection-limit apply global { ipv6-policy | policy }

Default

No connection limit policy is applied globally.

Views

System view

Predefined user roles

network-admin

Parameters

ipv6-policy: Specifies an IPv6 connection limit policy.

policy: Specifies an IPv4 connection limit policy.

policy-id: Specifies the ID of a connection limit policy, in the range of 1 to 32.

Usage guidelines

Only one IPv4 connection limit policy and one IPv6 connection limit policy can be applied globally. A new IPv4 or IPv6 connection limit policy overwrites the old one.

Examples

# Apply IPv4 connection limit policy 1 globally.

<Sysname> system-view

[Sysname] connection-limit apply global policy 1

# Apply IPv6 connection limit policy 12 globally.

<Sysname> system-view

[Sysname] connection-limit apply global ipv6-policy 12

Related commands

connection-limit

limit

description

Use description to configure a description for a connection limit policy.

Use undo description to restore the default.

Syntax

description text

undo description

Default

A connection limit policy does not have a description.

Views

IPv4 connection limit policy view

IPv6 connection limit policy view

Predefined user roles

network-admin

Parameters

text: Specifies a description, a case-sensitive string of 1 to 127 characters.

Usage guidelines

If you execute this command multiple times, the most recent configuration takes effect.

Examples

# Configure the description as CenterToA for IPv4 connection limit policy 1.

<Sysname> system-view

[Sysname] connection-limit policy 1

[Sysname-connlmt-policy-1] description CenterToA

Related commands

display connection-limit

display connection-limit

Use display connection-limit to display information about connection limit policies.

Syntax

display connection-limit { ipv6-policy | policy } { policy-id | all }

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

ipv6-policy: Specifies an IPv6 connection limit policy.

policy: Specifies an IPv4 connection limit policy.

policy-id: Specifies the ID of a connection limit policy, in the range of 1 to 32.

all: Specifies all connection limit policies.

Examples

# Display information about all IPv4 connection limit policies.

<Sysname> display connection-limit policy all

3 policies in total:

 Policy  Rule     Stat Type  HiThres  LoThres  Rate     PermitNew   ACL

--------------------------------------------------------------------------------

      0     1  Src-Dst-Port     2000     1800    10            No   3000

           12       Src-Dst      500       45     0           Yes   3001

          255            --  1000000   980000     0            No   2001

      1     2      Dst-Port      800       70     0           Yes   3010

            3       Src-Dst      100       90     0            No   3000

           10  Src-Dst-Port       50       45     0            No   3003

           11           Src      200      200     0            No   3004

          200           --    500000   498000     0            No   2002

     28     4          Port     1500     1400     0            No   3100

            5           Dst     3000      280     0            No   3101

           21       Src-Dst      200      180     0            No   3102

           25      Src-Port       50       35     0            No   3200

 

Description list:

 Policy      Description

--------------------------------------------------------------------------------

      1       IPv4Description1

     28      Description for IPv4 28

# Display information about IPv4 connection limit policy 1.

<Sysname> display connection-limit policy 1

IPv4 connection limit policy 1 has been applied 5 times, and has 5 limit rules.

Description: IPv4Description1

Limit rule list:

 Policy  Rule     Stat Type  HiThres  LoThres     Rate   PermitNew   ACL

--------------------------------------------------------------------------------

      1     2      Dst-Port      800       70     0          Yes   3010

            3       Src-Dst      100       90     0           No   3000

           10  Src-Dst-Port       50       45     0           No   3003

           11           Src      200      200     0           No   3004

          200           --    500000   498000     0           No   2002

 Application list:

     GigabitEthernet1/0/1

     GigabitEthernet1/0/2

     Vlan-interface2

     Global

# Display information about all IPv6 connection limit policies.

<Sysname> display connection-limit ipv6-policy all

2 policies in total:

 Policy  Rule     Stat Type  HiThres  LoThres  Rate     PermitNew   ACL

--------------------------------------------------------------------------------

      3     1       Src-Dst     1000      800    10           Yes   3010

            2           Dst      500      450     0           Yes   3001

      4     2  Src-Dst-Port      800      700     0           No    3010

            3           Src      100       90     0           No    3020

          200            --   100000    89000     0           No    2005

 

Description list:

 Policy      Description

--------------------------------------------------------------------------------

      3      IPv6Description3

      4      Description for IPv6 4

# Display information about IPv6 connection limit policy 3.

<Sysname> display connection-limit ipv6-policy 3

IPv6 connection limit policy 3 has been applied 3 times, and has 2 limit rules.

Description: IPv6Description3

Limit rule list:

 Policy  Rule     Stat Type  HiThres  LoThres  Rate     PermitNew   ACL

--------------------------------------------------------------------------------

     3     1       Src-Dst     1000      800     0           Yes   3010

           2           Dst      500      450     0            No   3001

Application list:

    GigabitEthernet1/0/1

    Vlan-interface2

Table 1 Command output

Field	Description
Limit rule list	Connection limit policy information.
Policy	Number of the connection limit policy.
Rule	Number of the connection limit rule.
Stat Type	Statistics types: ·     Src-Dst-Port—Limits connections by source IP, destination IP, and service combination. ·     Src-Dst—Limits connections by source IP address and destination IP address combination. ·     Src-Port—Limits connections by source IP and service combination. ·     Dst-Port—Limits connections by destination IP and service combination. ·     Src—Limits connections by source IP address. ·     Dst—Limits connections by destination IP address. ·     Port—Limits connections by service. ·     Dslite—Limits connections by B4 device of a DS-Lite tunnel.(This value is not supported in the current software version.) ·     --—Limits connections not by a specific IP address or service. All connections that match the ACL used by the rule are limited.
HiThres	Upper limit of the connections.
LoThres	Lower limit of the connections.
Rate	Maximum number of connections established per second.
ACL	Number or name of the ACL used by the rule.
PermitNew	Permit new connections when the connection count or connection rate exceeds the threshold.
Application list	Application list of the connection limit policy, including interface name and Global. Global indicates that the connection limit policy is applied globally.
Description	Connection limit policy description.
Description list	List of connection limit policy descriptions.

 

Related commands

connection-limit

connection-limit apply

connection-limit apply global

limit

display connection-limit ipv6-stat-nodes

Use display connection-limit ipv6-stat-nodes to display statistics about IPv6 connections that match connection limit rules globally or on an interface.

Syntax

display connection-limit ipv6-stat-nodes { global | interface interface-type interface-number } [ { deny-new | permit-new } | destination destination-ip | service-port port-number | source source-ip ] * [ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays statistics about IPv6 connections that match connection limit rules globally.

interface interface-type interface-number: Specifies an interface by its type and number.

deny-new: Displays limit rule-based statistics sets of which new connections are rejected.

permit-new: Displays limit rule-based statistics sets of which new connections are allowed.

destination destination-ip: Specifies a destination by its IP address.

service-port port-number: Specifies a service port by its port number.

source source-ip: Specifies a source by its IP address.

count: Displays only the number of limit rule-based statistics sets. Detailed information about the specified IPv6 connections is not displayed. If you do not specify this keyword, the command displays detailed information about the specified IPv6 connections that match connection limit rules.

Usage guidelines

The statistics for this command include the following information:

·     Connection information, including the source/destination IP address, service port, and transport layer protocol of connections.

·     Matching connection limit rules.

·     Number of current connections.

·     Whether or not new connections can be created.

To further filter the output statistics, specify the following options in the command:

·     source source-ip.

·     destination destination-ip.

·     service-port port-number.

·     permit-new.

·     deny-new.

For example, if you specify the source source-ip and destination destination-ip combination, this command displays statistics about IPv6 connections that match connection limit rules by source IP address and destination IP address.

If you specify none of the previously mentioned parameters, this command displays statistics about all IPv6 connections that match connection limit rules.

Deleting or modifying an IPv6 connection limit policy will not delete the effective IPv6 connection limit rule-based statistics sets. An IPv6 connection limit rule-based statistics set will be automatically deleted after all the IPv6 connections for the set are disconnected.

Examples

# Display statistics about all IPv6 connections that match the connection limit rule on GigabitEthernet 1/0/1.

<Sysname> display connection-limit ipv6-stat-nodes interface gigabitethernet 1/0/1

Slot 0:

 Src IP address          : Any

     VPN instance        : vpn5

 Dst IP address          : fe80::5ed9:98ff:feb1:69b6

     VPN instance        : abcdefghijklmnopqrstuvwxyzabcde

 DS-Lite tunnel peer     : 9876543210

 Service                 : tcp/12345

 Limit rule ID           : 12345(ACL: 3184)

 Sessions threshold Hi/Lo: 1000000/90000

 Sessions count          : 150000

 Sessions limit rate     : 0

 New session flag        : Permit

# Display statistics about all IPv6 connections that match the connection limit rule on VLAN-interface 2.

<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 2

Slot 0:

 Src IP address          : Any

     VPN instance        : vpn5

 Dst IP address          : fe80::5ed9:98ff:feb1:69b6

     VPN instance        : abcdefghijklmnopqrstuvwxyzabcde

 DS-Lite tunnel peer     : 9876543210

 Service                 : tcp/12345

 Limit rule ID           : 12345(ACL: 3184)

 Sessions threshold Hi/Lo: 1000000/90000

 Sessions count          : 150000

 Sessions limit rate     : 0

 New session flag        : Permit

# Display the number of limit rule-based statistics sets by source IP address 2::1.

<Sysname> display connection-limit ipv6-stat-nodes global source 2::1 count

Slot 0:

       Current limit statistic nodes count is 16.

Table 2 Command output

Field	Description
Src IP address	Source IP address.
Dst IP address	Destination IP address.
VPN instance	This field is not supported in the current software version. MPLS L3VPN instance to which the IP address belongs. Two hyphens (--) indicates that the IP address is on the public network.
DS-Lite tunnel peer	This field is not supported in the current software version. Peer IP address of the DS-Lite tunnel to which the connection belongs. Two hyphens (--) indicates that the connection does not belong to a DS-Lite tunnel.
Service	Protocol name and service port number. For an unwell-known protocol, this field displays unknown(xx).The cross signs (xx) indicates the protocol number. For the ICMP protocol, the protocol number is the decimal digits that are converted from the hexadecimal contents of the type and code fields.
Limit rule ID	ID of the matched rule. The ACL number of the rule is enclosed in parentheses.
Sessions threshold Hi/Lo	Upper and lower connection limits.
Sessions count	Number of current connections.
Sessions limit rate	Maximum number of connections established per second.
New session flag	Whether or not new connections can be created: ·     Permit—New connections can be created. ·     Deny—New connections cannot be created. NOTE: When the number of connections reaches the upper limit, this field displays Permit although new connections are not allowed. This field displays Deny only when the number of connections exceeds the upper limit.

 

Related commands

connection-limit apply global ipv6-policy

connection-limit apply ipv6-policy

connection-limit ipv6-policy

limit

display connection-limit statistics

Use display connection-limit statistics to display the connection limit statistics globally or on an interface.

Syntax

display connection-limit statistics { global | interface interface-type interface-number }

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays the global connection limit statistics.

interface interface-type interface-number: Specifies an interface by its type and number.

Examples

# Display the global connection limit statistics.

<Sysname> display connection-limit statistics global

Connection limit statistics (Global, slot 0):

    Dropped IPv4 packets:   54781

    Dropped IPv6 packets:   11457

Table 3 Command output

Field	Description
Dropped IPv4 packet	Number of IPv4 packets that are dropped because the upper connection limit is exceeded for the IPv4 connection limit policy that is configured globally or on an interface.
Dropped IPv6 packet	Number of IPv6 packets that are dropped because the upper connection limit is exceeded for the IPv6 connection limit policy that is configured globally or on an interface.

 

Related commands

connection-limit

connection-limit apply

connection-limit apply global

limit

display connection-limit stat-nodes

Use display connection-limit stat-nodes to display statistics about IPv4 connections that match connection limit rules globally or on an interface.

Syntax

display connection-limit stat-nodes { global | interface interface-type interface-number } [ { deny-new | permit-new } | destination destination-ip | service-port port-number | source source-ip ] * [ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays statistics about IPv4 connections that match connection limit rules globally.

interface interface-type interface-number: Specifies an interface by its type and number.

deny-new: Displays limit rule-based statistics sets of which new connections are rejected.

permit-new: Displays limit rule-based statistics sets of which new connections are allowed.

destination destination-ip: Specifies a destination by its IP address.

service-port port-number: Specifies a service port by its port number.

source source-ip: Specifies a source by its IP address.

count: Displays only the number of limit rule-based statistics sets. Detailed information about the specified IPv4 connections is not displayed. If you do not specify this keyword, the command displays detailed information about the specified IPv4 connections that match connection limit rules.

Usage guidelines

The statistics for this command include the following information:

·     Connection information, including the source/destination IP address, service port, and transport layer protocol of connections.

·     Matching connection limit rules.

·     Number of current connections.

·     Whether or not new connections can be created.

To further filter the output statistics, specify the following options in the command:

·     source source-ip.

·     destination destination-ip.

·     service-port port-number.

·     permit-new.

·     deny-new.

For example, if you specify the source source-ip and destination destination-ip combination, this command displays statistics about IPv4 connections that match connection limit rules by source IP address and destination IP address.

If you specify none of the previously mentioned parameters, this command displays statistics about all IPv4 connections that match connection limit rules.

Deleting or modifying an IPv4 connection limit policy will not delete the effective IPv4 connection limit rule-based statistics sets. An IPv4 connection limit rule-based statistics set will be automatically deleted after all the IPv4 connections for the set are disconnected.

Examples

# Display statistics about all IPv4 connections that match the connection limit rule on GigabitEthernet 1/0/1.

<Sysname> display connection-limit stat-nodes interface gigabitethernet 1/0/1

Slot 0:

 Src IP address          : 100.100.100.100

     VPN instance        : 0123456789012345678901234567890

 Dst IP address          : 200.200.200.200

     VPN instance        : abcdefghijklmnopqrstuvwxyzabcde

 DS-Lite tunnel peer     : 1234567890

 Service                 : tcp/12345

 Limit rule ID           : 12345(ACL: 3001)

 Sessions threshold Hi/Lo: 1100000/980000

 Sessions count          : 1050000

 Sessions limit rate     : 0

 New session flag        : Permit

# Display statistics about all IPv4 connections that match the connection limit rule on VLAN-interface 2.

<Sysname> display connection-limit stat-nodes interface vlan-interface 2

Slot 0:

 Src IP address          : 100.100.100.100

     VPN instance        : 0123456789012345678901234567890

 Dst IP address          : 200.200.200.200

     VPN instance        : abcdefghijklmnopqrstuvwxyzabcde

 DS-Lite tunnel peer     : 1234567890

 Service                 : tcp/12345

 Limit rule ID           : 12345(ACL: 3001)

 Sessions threshold Hi/Lo: 1100000/980000

 Sessions count          : 1050000

 Sessions limit rate     : 0

 New session flag        : Permit

# Display the number of global limit rule-based statistics sets.

<Sysname> display connection-limit stat-nodes global count

Slot 0:

       Current limit statistic nodes count is 5.

Table 4 Command output

Field	Description
Src IP address	Source IP address.
Dst IP address	Destination IP address.
VPN instance	This field is not supported in the current software version. MPLS L3VPN instance to which the IP address belongs. Two hyphens (--) indicates that the IP address is on the public network.
DS-Lite tunnel peer	This field is not supported in the current software version. Peer IP address of the DS-Lite tunnel to which the connection belongs. Two hyphens (--) indicates that the connection does not belong to a DS-Lite tunnel.
Service	Protocol name and service port number. For an unwell-known protocol, this field displays unknown(xx). The cross signs (xx) represents the protocol number. For the ICMP protocol, the protocol number is the decimal digits that are converted from the hexadecimal contents of the type and code fields.
Sessions threshold Hi/Lo	Upper and lower connection limits.
Sessions count	Number of current connections.
Sessions limit rate	Maximum number of connections established per second.
New session flag	Whether or not new connections can be created: ·     Permit—New connections can be created. ·     Deny—New connections cannot be created. NOTE: When the number of connections reaches the upper limit, this field displays Permit although new connections are not allowed. This field displays Deny only when the number of connections exceeds the upper limit.

 

Related commands

connection-limit apply global policy

connection-limit apply policy

connection-limit policy

limit

limit

Use limit to configure a connection limit rule.

Use undo limit to delete a connection limit rule.

Syntax

In IPv4 connection limit policy view:

limit limit-id acl { acl-number | name acl-name } [ per-destination | per-service | per-source ] * { amount max-amount min-amount | rate rate } * [ description text  | permit-new ] *

undo limit limit-id

In IPv6 connection limit policy view:

limit limit-id acl ipv6 { acl-number | name acl-name } [ per-destination | per-service | per-source ] * { amount max-amount min-amount | rate rate } * [ description text  | permit-new ] *

undo limit limit-id

Default

No connection limit rules exist.

Views

IPv4 connection limit policy view

IPv6 connection limit policy view

Predefined user roles

network-admin

Parameters

limit-id: Specifies a connection limit rule by its ID in the range of 1 to 256.

acl: Specifies the ACL that matches the user range. Only the user connections that match the ACL are limited.

ipv6: Specifies an IPv6 ACL. If you do not specify this keyword, an IPv4 ACL is used.

acl-number: Specifies an ACL by its number in the range of 2000 to 3999.

name acl-name: Specifies an ACL by its name. The acl-name argument is a case-insensitive string of 1 to 63 characters. It must start with an English letter. To avoid confusion, it cannot be all.

per-destination: Limits connections by destination IP address.

per-service: Limits connections by service depending on transport layer protocol and service port.

per-source: Limits connections by source IP address.

amount: Limits the number of connections.

max-amount: Specifies the upper connection limit in the range of 1 to 4294967294. If the permit-new parameter is not specified, when user connections in a range or of a type exceed the upper limit, new connections cannot be created until the connection count drops below min-amount.

min-amount: Specifies the lower connection limit in the range of 1 to 4294967294. The lower connection limit cannot be greater than the upper connection limit. New connections cannot be created until the connection number goes below the lower connection limit.

rate: Limits the connection establishment rate.

rate: Specifies the maximum number of connections established per second. The value range is 5 to 10000000. If the permit-new parameter is not specified, when user connections in a range or of a type exceed this rate, new connections cannot be created until the connection rate drops below this rate.

description text: Specifies a description for the connection limit rule, a case-sensitive string of 1 to 127 characters. By default, a connection limit rule does not have a description.

permit-new: Permits new connections when the connection count or connection rate exceeds the threshold and generates alarm logs.

Usage guidelines

Each connection limit policy can define multiple rules, and each rule must specify the used ACL, rule type, and either of upper/lower connection limit and connection establishment rate limit. In one rule, you can specify one or multiple of the keywords per-destination, per-source, and per-service. For example, if the per-destination and per-source combination is specified, connections are limited by the source IP address and destination IP address. Connections with the same source IP address and destination IP address are the same type.

When you configure a connection limit rule, follow these guidelines:

·     Different rules in the same connection limit policy must use different ACLs.

·     If you specify none of the per-destination, per-source, and per-service keywords, all connections that match the specified ACL are limited by the specified value.

·     When the connections established on a device are matched against a connection limit policy, the limit rules in the policy are matched in ascending order of rule ID.

·     When the specified ACL changes, the connections that have been established are limited by the new connection limit policy.

Examples

# Configure connection limit rule 1 for IPv4 connection limit policy 1:

1.     Configure ACL 3000.

<Sysname> system-view

[Sysname] acl advanced 3000

[Sysname-acl-ipv4-adv-3000] rule permit ip source 192.168.0.0 0.0.0.255

[Sysname-acl-ipv4-adv-3000] quit

2.     Limit connections that match ACL 3000 by the source and destination IP addresses, with the upper limit 2000, lower limit 1800, and establishment rate 10 per second.

[Sysname] connection-limit policy 1

[Sysname-connlmt-policy-1] limit 1 acl 3000 per-destination per-source amount 2000 1800 rate 10

3.     Verify that when the connection number exceeds 2000, new connections cannot be established until the connection number goes below 1800. (Details not shown.)

# Configure connection limit rule 1 for IPv4 connection limit policy 1:

1.     Configure ACL 3000.

<Sysname> system-view

[Sysname] acl advanced 3000

[Sysname-acl-ipv4-adv-3000] rule permit ip source 192.168.0.0 0.0.0.255

[Sysname-acl-ipv4-adv-3000] quit

2.     Limit connections that match ACL 3000 by the source and destination IP addresses, with the upper limit 2000, lower limit 1800, and establishment rate 10 per second. Specify the permit-new keyword.

[Sysname] connection-limit policy 1

[Sysname-connlmt-policy-1] limit 1 acl 3000 per-destination per-source amount 2000 1800 rate 10 permit-new

3.     Verify that when the connection number exceeds 2000 or the connection rate exceeds 10 per second, new connections can be established but alarm logs are generated. (Details not shown.)

# Configure connection limit rule 2 for IPv6 connection limit policy 12:

1.     Configure ACL 2001.

<Sysname> system-view

[Sysname] acl ipv6 basic 2001

[Sysname-acl-ipv6-basic-2001] rule permit source 2:1::/96

[Sysname-acl-ipv6-basic-2001] quit

2.     Limit connections that match ACL 2001 by the source and destination IP addresses, with the upper limit 200, lower limit 100, and establishment rate 10 per second.

[Sysname] connection-limit ipv6-policy 12

[Sysname-connlmt-ipv6-policy-12] limit 2 acl ipv6 2001 per-destination amount 200 100 rate 10

3.     Verify that when the connection number exceeds 200, new connections cannot be established until the connection number goes below 100. (Details not shown.)

# Configure connection limit rule 2 for IPv6 connection limit policy 12:

1.     Configure ACL 2001.

<Sysname> system-view

[Sysname] acl ipv6 basic 2001

[Sysname-acl-ipv6-basic-2001] rule permit source 2:1::/96

[Sysname-acl-ipv6-basic-2001] quit

2.     Limit connections that match ACL 2001 by the destination IP addresses, with the upper limit 200, lower limit 100, and establishment rate 10 per second. Specify the permit-new keyword.

[Sysname] connection-limit ipv6-policy 12

[Sysname-connlmt-ipv6-policy-12] limit 2 acl ipv6 2001 per-destination amount 200 100 rate 10

3.     Verify that when the connection number exceeds 200 or the connection rate exceeds 10 per second, new connections can be established but alarm logs are generated. (Details not shown.)

Related commands

connection-limit

display connection-limit

reset connection-limit statistics

Use reset connection-limit statistics to clear the connection limit statistics globally or on an interface.

Syntax

reset connection-limit statistics { global | interface interface-type interface-number }

Views

User view

Predefined user roles

network-admin

network-operator

Parameters

global: Clears the global connection limit statistics.

interface interface-type interface-number: Specifies an interface by its type and number.

Examples

# Clear the connection limit statistics on GigabitEthernet 1/0/1.

<Sysname> reset connection-limit statistics interface gigabitethernet 1/0/1

# Clear the connection limit statistics on VLAN-interface 2.

<Sysname> reset connection-limit statistics interface vlan-interface 2

Related commands

display connection-limit statistics