Contents

User profile commands· 1

display user-profile· 1

user-profile· 2

User profile commands

display user-profile

Use display user-profile to display configuration and online user information for user profiles.

Syntax

display user-profile [ name profile-name ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters. Valid characters include English letters, digits, underscores (_), minus signs (–), and dots (.). The name can start with an English letter or digit, and cannot contain only digits. The name must be unique globally. If you do not specify this option, the command displays configuration and online user information for all user profiles.

slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command displays user profile configuration and online user information on all cards.

Examples

# Display configuration and online user information for user profile aaa.

<Sysname> display user-profile name aaa

  User-Profile: aaa

    Direction: Inbound

      Policy: p1

    Direction: Outbound

      Policy: p2

    User user_1:

      Authentication type: 802.1X

      Network attributes:

        Interface    : GigabitEthernet1/0/1

        MAC address  : 0000-1111-2222

      Failed action list:

        Direction: Inbound

         Policy: p1

    User user_2:

      Authentication type: Portal

      Network attributes:

        Interface    : GigabitEthernet1/0/3

        IP address   : 172.16.187.16

        VPN          : N/A

        Service VLAN : 100

Table 1 Command output

‌

user-profile

Use user-profile to create a user profile and enter its view, or enter the view of an existing user profile.

Use undo user-profile to delete a user profile.

Syntax

user-profile profile-name

undo user-profile profile-name

Default

No user profiles exist.

Views

System view

Predefined user roles

network-admin

Parameters

profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters. Valid characters include English letters, digits, underscores (_), minus signs (–), and dots (.). The name can start with an English letter or digit, and cannot contain only digits. The name must be unique globally.

Examples

# Create user profile a123 and enter the view of a123.

<Sysname> system-view

[Sysname] user-profile a123

[Sysname-user-profile-a123]