08-WLAN Security Command Reference

HomeSupportReference GuidesCommand ReferencesH3C Access Controllers Command References(R5447P04)-6W10008-WLAN Security Command Reference
05-PMM commands
Title Size Download
05-PMM commands 54.40 KB

PMM commands

The following compatibility matrixes show the support of hardware platforms for PMM:

 

Hardware series

Model

Product code

PMM compatibility

WX1800H series

WX1804H

EWP-WX1804H-PWR-CN

Yes

WX2500H series

WX2508H-PWR-LTE

WX2510H

WX2510H-F

WX2540H

WX2540H-F

WX2560H

EWP-WX2508H-PWR-LTE

EWP-WX2510H-PWR

EWP-WX2510H-F-PWR

EWP-WX2540H

EWP-WX2540H-F

EWP-WX2560H

Yes:

·     WX2510H

·     WX2510H-F

No:

·     WX2508H-PWR-LTE

·     WX2540H

·     WX2540H-F

·     WX2560H

MAK series

MAK204

MAK206

EWP-MAK204

EWP-MAK206

No

WX3000H series

WX3010H

WX3010H-X

WX3010H-L

WX3024H

WX3024H-L

WX3024H-F

EWP-WX3010H

EWP-WX3010H-X-PWR

EWP-WX3010H-L-PWR

EWP-WX3024H

EWP-WX3024H-L-PWR

EWP-WX3024H-F

No

WX3500H series

WX3508H

WX3510H

WX3520H

WX3520H-F

WX3540H

EWP-WX3508H

EWP-WX3510H

EWP-WX3520H

EWP-WX3520H-F

EWP-WX3540H

No

WX5500E series

WX5510E

WX5540E

EWP-WX5510E

EWP-WX5540E

No

WX5500H series

WX5540H

WX5560H

WX5580H

EWP-WX5540H

EWP-WX5560H

EWP-WX5580H

No

Access controller modules

LSUM1WCME0

EWPXM1WCME0

LSQM1WCMX20

LSUM1WCMX20RT

LSQM1WCMX40

LSUM1WCMX40RT

EWPXM2WCMD0F

EWPXM1MAC0F

LSUM1WCME0

EWPXM1WCME0

LSQM1WCMX20

LSUM1WCMX20RT

LSQM1WCMX40

LSUM1WCMX40RT

EWPXM2WCMD0F

EWPXM1MAC0F

No

Hardware series

Model

Product code

PMM compatibility

WX1800H series

WX1804H

WX1810H

WX1820H

WX1840H

EWP-WX1804H-PWR

EWP-WX1810H-PWR

EWP-WX1820H

EWP-WX1840H-GL

No

WX3800H series

WX3820H

WX3840H

EWP-WX3820H-GL

EWP-WX3840H-GL

No

WX5800H series

WX5860H

EWP-WX5860H-GL

No

pmm audit-format

Use pmm audit-format to specify the audit packet format.

Use undo pmm audit-format to restore the default.

Syntax

pmm audit-format { exands | jc | rzx }

undo pmm audit-format

Default

The audit packet format is not specified.

Views

System view

Predefined user roles

network-admin

Parameters

exands: Specifies the exands format.

jc: Specifies the jc format, a format required by ACOrange.

rzx: Specifies the rzx format, a format required by SURFILTER.

Examples

# Specify the audit packet format as rzx.

<Sysname> system-view

[sysname] pmm audit-format rzx

Related commands

pmm enable

pmm http server

pmm sftp server

pmm source-interface

pmm enable

Use pmm enable to enable packet monitor management (PMM).

Use undo pmm enable to disable PMM.

Syntax

pmm enable

undo pmm enable

Default

PMM is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

After you enable PMM, the AP starts obtaining packets from clients and sends the packets to the server in the format required by the server.

Examples

# Enable PMM for VLAN-interface 100.

<Sysname> system-view

[Sysname] pmm enable

Related commands

pmm audit-format

pmm source-interface

pmm http server

Use pmm http server to specify the IP address of the exands server.

Use undo pmm http server to restore the default.

Syntax

pmm http server ipv4 ip-address

undo pmm http server

Default

The IP address of the exands server is not specified.

Views

System view

Predefined user roles

network-admin

Parameters

ipv4 ip-address: Specifies the IPv4 address of the exands server in dotted decimal notation.

Examples

# Specify the IP address of the exands server as 59.40.79.91.

<Sysname> system-view

[Sysname] pmm http server ipv4 59.40.79.91

Related commands

pmm audit-format

pmm source-interface

Use pmm source-interface to specify the source interface for sending captured packets to a server.

Use undo pmm source-interface to restore the default.

Syntax

pmm source-interface interface-type interface-number

undo pmm source-interface

Default

The source interface for sending captured packets to a server is not specified.

Views

AP view

System view

Predefined user roles

network-admin

Parameters

interface-type interface-number: Specifies the interface type and number.

Examples

# Specify VLAN-interface 1 as the source interface for sending captured packets to a server.

<Sysname> system-view

[Sysname] pmm source-interface vlan-interface 1

Related commands

pmm audit-format

pmm enable

pmm sftp server

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网