Login
- Table of Contents
-
- 06-Network
- 01-Scanner
- 02-VRF
- 03-Interface
- 04-Interface pairs
- 05-Interface collaboration
- 06-Security zones
- 07-VLAN
- 08-MAC
- 09-DNS
- 10-ARP
- 11-ND
- 12-Forwarding advanced settings
- 13-ALG
- 14-GRE
- 15-IPsec
- 16-ADVPN
- 17-L2TP
- 18-SSL VPN
- 19-Routing table
- 20-Static routing
- 21-Policy-based routing
- 22-OSPF
- 23-BGP
- 24-RIP
- 25-IPv4 multicast routing
- 26-IPv6 multicast routing
- 27-PIM
- 28-IGMP
- 29-MLD
- 30-DHCP
- 31-HTTP
- 32-SSH
- 33-NTP
- 34-FTP
- 35-Telnet
- 36-MAC authentication
- 37-MAC address whitelist
- 38-MAC access silent MAC info
- 39-MAC access advanced settings
- 40-IP authenticationdocx
- 41-IPv4 whitelist
- 42-IPv6 whitelist
- 43-4G
- 44-Wireless
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 13-ALG | 24.69 KB |
ALG
Introduction
You can enable ALG for the specified application protocol type to analyze and process the application layer packet payload. On the device, you can enable ALG for the following services:
· NAT ALG
¡ NAT44 supports ALG for the following protocols:
- DNS.
- H323.
- RTSP.
- ILS.
- PPTP.
- FTP.
- SIP.
- SQLNET.
- MGCP.
- RSH.
- ICMP error packets.
- TFTP.
- XDMCP.
- NBT.
- SCCP.
- SCTP.
¡ NAT64 supports ALG for the following protocols:
- DNS.
- FTP.
- HTTP.
- ICMP error packets.
¡ NAT66 supports ALG for the following protocols:
- FTP.
- ICMP error packets.
· LB ALG
LB LAG supports ALG for the following protocols:
¡ DNS.
¡ H323.
¡ RTSP.
¡ ILS.
¡ PPTP.
¡ FTP.
¡ SIP.
¡ SQLNET.
¡ MGCP.
¡ RSH.
¡ ICMP error packets.
¡ TFTP.
¡ XDMCP.
¡ NBT.
¡ SCCP
· ASPF ALG
ASPF ALG supports ALG for the FTP protocol,
