12-Telemetry Configuration Guide

HomeSupportConfigure & DeployConfiguration GuidesH3C S6850 & S9850 Switch Series Configuration Guides-Release 655x-6W10212-Telemetry Configuration Guide
02-INT configuration
Title Size Download
02-INT configuration 169.79 KB

Configuring INT

About INT

The Inband Network Telemetry (INT) feature is a network monitoring technology designed to collect data from the device. The device sends data to a collector in real time for device performance monitoring and network monitoring.

INT network components

As shown in Figure 1, an INT network contains the following INT-enabled devices: one entry node, one transit node, and one exit node.

Figure 1 INT network

 

INT packet formats

INT generates INT packets by mirroring original packets, inserting INT headers, and collecting data. The INT header and collected data are in the original IP header. Therefore, an INT packet and its original packet have the same IP header and forwarding path.

The device supports generating INT packets from TCP packets and UDP packets.  Figure 2 shows the INT packet formats. The 64 most significant bits of the INT header are fixed at 0xaaaaaaaabbbbbbbb, which are the INT mark.

Figure 2 INT packet formats

 

How INT works

INT supports common INT and flexible INT. The two types of INT have the following differences:

·     Common INT—Each node needs to be configured with an INT role on its input interface: ingress, transit, and egress. Traffic flows are defined on the entry node by using a QoS policy. INT flows are automatically identified on the transit node and exit node and processed according to configured actions. On each input interface in the path, you can perform INT processing only on the flows defined on the entry node.

·     Flexible INT—No device role needs to be configured on each node. On each node, an ACL can be used to define a flow and an action used to take on the defined flow. For the same flow, the original packets are matched on the entry node, and the INT packets are matched on the transit node and exit node. You can define multiple flows on an interface and take different actions on different flows.

Common INT is easy to configure and is recommended. Use flexible INT only when you need to process multiple flows on an interface.

Common INT

As shown in Figure 3, the nodes in common INT perform the following functions:

1.     On the entry node, the ingress port uses a QoS policy to sample matching packets, and mirrors sampled packets to the INT processor. Then, the INT processor adds an INT header to the INT packet and loops it back to the ingress port. The ingress port identifies the looped-back INT packet according to the INT mark, adds collected data to it, and forwards it to the egress port. The egress port adds collected data to the INT packet and sends it to the transit node.

2.     On the transit node, the ingress port identifies the INT packet according to the INT mark, adds collected data to it, and forwards it to the egress port. The egress port adds collected data to the INT packet, and sends it to the exit node.

3.     On the exit node, the ingress port identifies the INT packet according to the INT mark, adds collected data to the INT packet, encapsulates the INT packet with the configured parameters, and sends it to the collector.

Flexible INT

As shown in Figure 3, the nodes in flexible INT perform the following functions:

1.     On the entry node, the input interface uses an ACL to sample matching packets, and mirrors sampled packets to the INT processor. Then, the INT processor adds an INT header to the INT packet and loops it back to the input interface. The ingress port identifies the looped-back INT packet according to an ACL and adds collected data to it, and forwards it. The egress port adds collected data to the INT packet and sends it to the transit node.

2.     On the transit node, the input interface uses an ACL to identify INT packets, adds collected data to INT packets, and forwards them to the input interface. The input interface adds collected data to INT packets and sends them to the exit node.

3.     On the exit node, the input interface uses an ACL to identify INT packets and mirrors them to the INT processor. The INT processor encapsulates the INT packets and sends them to the collector.

Figure 3 Flexible INT

 

Restrictions and guidelines: INT configuration

Common INT and flexible INT can only be deployed in underlay networks.

As a best practice to configure INT, first configure the transit node and exit node, and then the entry node.

You can enable sampling for only one of the following features on the device:

·     INT.

·     NetStream.

·     IPv6 NetStream.

·     Mirroring.

·     sFlow.

For more information about NetStream, IPv6 NetStream, mirroring, and sFlow, see Network Management and Monitoring Configuration Guide.

Configuring common INT

Configuring the exit node

1.     Specify a device ID.

a.     Enter system view.

system-view

b.     Specify a device ID for the exit node.

telemetry ifa device-id address

By default, the exit node does not have a device ID.

2.     Configure the egress interface.

a.     Enter interface view.

interface interface-type interface-number

b.     Specify the interface as the egress interface.

telemetry ifa role egress

By default, an interface is not used as the egress interface.

c.     Return to system view

quit

3.     Configure addressing parameters to encapsulate in INT packets sent to the collector.

telemetry ifa collector source source-address destination dest-address source-port port destination-port port [ vlan vlan-id ]

By default, no addressing parameters are configured for INT packets.

4.     Enable INT globally.

telemetry ifa global enable

By default, INT is enabled globally.

Configuring the transit node

1.     Specify a device ID.

a.     Enter system view.

system-view

b.     Specify a device ID for the transit node.

telemetry ifa device-id address

By default, the transit node does not have a device ID.

2.     Configure the transit interface.

a.     Enter interface view.

interface interface-type interface-number

b.     Specify the interface as the transit interface.

telemetry ifa role transit

By default, an interface is not used as the transit interface.

c.     Return to system view

quit

3.     Enable INT globally.

telemetry ifa global enable

By default, INT is enabled globally.

Configuring the entry node

1.     Specify a device ID.

a.     Enter system view.

system-view

b.     Specify a device ID for the entry node.

telemetry ifa device-id address

By default, the entry node does not have a device ID.

2.     Configure the ingress interface.

a.     Enter interface view.

interface interface-type interface-number

b.     Specify the interface as the ingress interface.

telemetry ifa role ingress

By default, an interface is not used as the ingress interface.

c.     Return to system view

quit

3.     Enable internal loopback on an interface.

a.     Enter interface view.

interface interface-type interface-number

b.     Enable internal loopback on the interface.

telemetry ifa loopback

By default, internal loopback is disabled on an interface.

Enable internal loopback on any interface that is in the same port group as the ingress port. To view port grouping information, execute the display qos-acl resource command. Ports under the same Interfaces field are in the same port group.

c.     Return to system view

quit

This function is required only on the S9850 series switches.

4.     Mirror packets to the INT processor.

a.     Execute the following commands in sequence to define a traffic class:

traffic classifier classifier-name [ operator { and | or } ]

if-match match-criteria

quit

For more information about the if-match command, see QoS commands in ACL and QoS Command Reference.

b.     Execute the following commands in sequence to define a traffic behavior:

traffic behavior behavior-name

mirror-to ifa-processor [ sampler sampler-name ]

quit

For more information about the mirror-to command, see mirroring commands in Network Management and Monitoring Command Reference.

c.     Execute the following commands in sequence to define a QoS policy:

qos [ mirroring ] policy policy-name

classifier classifier-name behavior behavior-name

quit

d.     Execute the following commands in sequence to apply the QoS policy to the inbound direction of an interface:

interface interface-type interface-number

qos apply [ mirroring ] policy policy-name inbound

quit

5.     Enable INT globally.

telemetry ifa global enable

By default, INT is enabled globally.

Configuring flexible INT

Configuring the exit node

1.     Specify a device ID.

a.     Enter system view.

system-view

b.     Specify a device ID for the exit node.

telemetry ifa device-id address

By default, the exit node does not have a device ID.

2.     Mirror incoming INT packets to the INT processor and drop the original INT packets.

a.     Create a user-defined ACL and enter user-defined ACL view.

For information about the acl configuration command, see ACL commands in ACL and QoS Command Reference.

b.     Configure a rule for the user-defined ACL.

For information about the rule (user-defined ACL view) configuration command, see ACL commands in ACL and QoS Command Reference.

If the entry node uses an ACL when mirroring packets to the INT processor, the ACLs used for any other action on any node must have the same identification attributes plus an attribute to identify the INT flag. The identification attributes and the attribute to identify the INT flag must be in the same rule. For example, the rule in the ACL used on the entry node is rule permit tcp source 10.0.0.3 0, the rule in the ACL used for any other action must be rule permit tcp source 10.0.0.3 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0.

c.     Return to system view.

quit

d.     Enter interface view.

interface interface-type interface-number

e.     Configure the action of mirroring incoming INT packets to the INT processor and dropping the original INT packets.

telemetry ifa ifa-id acl user-defined { acl-number | name acl-name } action mirror-to-processor drop

By default, no action is configured.

f.     Return to system view.

quit

3.     Configure addressing parameters to encapsulate in INT packets sent to the collector.

telemetry ifa collector source source-address destination dest-address source-port port destination-port port [ vlan vlan-id ]

By default, no addressing parameters are configured for INT packets.

4.     Enable INT globally.

telemetry ifa global enable

By default, INT is enabled globally.

Configuring the transit node

1.     Specify a device ID.

a.     Enter system view.

system-view

b.     Specify a device ID for the transit node.

telemetry ifa device-id address

By default, the transit node does not have a device ID.

2.     Add collected data to INT packets on the input interface.

a.     Create a user-defined ACL and enter user-defined ACL view.

For information about the acl configuration command, see ACL commands in ACL and QoS Command Reference.

b.     Configure a rule for the user-defined ACL.

For information about the rule (user-defined ACL view) configuration command, see ACL commands in ACL and QoS Command Reference.

If the entry node uses an ACL when mirroring packets to the INT processor, the ACLs used for any other action on any node must have the same identification attributes plus an attribute to identify the INT flag. The identification attributes and the attribute to identify the INT flag must be in the same rule. For example, the rule in the ACL used on the entry node is rule permit tcp source 10.0.0.3 0, the rule in the ACL used for any other action must be rule permit tcp source 10.0.0.3 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0.

c.     Return to system view.

quit

d.     Enter interface view.

interface interface-type interface-number

e.     Configure the action of adding collected data to incoming INT packets.

telemetry ifa ifa-id acl user-defined { acl-number | name acl-name } action add-metadata

By default, no action is configured.

f.     Return to system view.

quit

3.     Enable INT globally.

telemetry ifa global enable

By default, INT is enabled globally.

Configuring the entry node

1.     Specify a device ID.

a.     Enter system view.

system-view

b.     Specify a device ID for the entry node.

telemetry ifa device-id address

By default, the entry node does not have a device ID.

2.     Mirror original packets on the input interface to the INT processor.

a.     Create an IPv4, Layer 2, or user-defined ACL and enter ACL view.

For information about the acl configuration command, see ACL commands in ACL and QoS Command Reference.

b.     Configure a rule for the ACL.

For information about the rule configuration command, see ACL commands in ACL and QoS Command Reference.

c.     Return to system view.

quit

d.     Enter interface view.

interface interface-type interface-number

e.     Configure the action of mirroring incoming original packets to the INT processor.

telemetry ifa ifa-id [ acl [ mac | user-defined ]{ acl-number | name acl-name } ] action mirror-to-processor [ sampler sampler-name ]

By default, no action is configured.

f.     Return to system view.

quit

3.     Enable internal loopback on an interface.

a.     Enter interface view.

interface interface-type interface-number

b.     Enable internal loopback on the interface.

telemetry ifa loopback

By default, internal loopback is disabled on an interface.

c.     Return to system view

quit

This function is required only on the S9850 series switches.

4.     Add collected data to local loopback traffic on the input interface.

a.     Create a user-defined ACL and enter user-defined ACL view.

For information about the acl configuration command, see ACL commands in ACL and QoS Command Reference.

b.     Configure a rule for the user-defined ACL.

For information about the rule (user-defined ACL view) configuration command, see ACL commands in ACL and QoS Command Reference.

If the entry node uses an ACL when mirroring original packets to the INT processor, the ACLs used for any other action on any node must have the same identification attributes plus an attribute to identify the INT flag. The identification attributes and the attribute to identify the INT flag must be in the same rule. For example, the rule in the ACL used to mirror original packets to the INT processor is rule permit tcp source 10.0.0.3 0, the rule in the ACL used for any other action must be rule permit tcp source 10.0.0.3 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0.

c.     Return to system view.

quit

d.     Enter interface view.

interface interface-type interface-number

e.     Configure the action of adding collected data to local loopback traffic.

telemetry ifa ifa-id acl user-defined { acl-number | name acl-name } local-loopback action add-metadata

By default, no action is configured.

f.     Return to system view.

quit

5.     Enable INT globally.

telemetry ifa global enable

By default, INT is enabled globally.

Display and maintenance commands for INT

Execute display commands in any view.

 

Task

Command

Display information about QoS policies applied to interfaces (see ACL and QoS Command Reference).

display qos [ mirroring ] policy interface [ interface-type interface-number ] [ slot slot-number ] inbound

Display INT configuration.

display telemetry ifa

INT configuration examples

Example: Configuring common INT

Network configuration

As shown in Figure 4, configure common INT to send INT packets to the collector.

Figure 4 Network diagram

 

Procedure

1.     Assign IP addresses to interfaces and configure routes. Make sure the network connections are available. (Details not shown.)

2.     Configure Device C:

# Specify 10.0.0.3 as the device ID of the exit node.

[DeviceC] telemetry ifa device-id 10.0.0.3

# Specify Twenty-FiveGigE 1/0/1 as the egress interface.

[DeviceC] interface twenty-fivegige 1/0/1

[DeviceC-Twenty-FiveGigE1/0/1] telemetry ifa role egress

[DeviceC-Twenty-FiveGigE1/0/1] quit

# Configure addressing parameters to encapsulate in INT packets sent to the collector.

[DeviceC] telemetry ifa collector source 20.0.0.2 destination 30.0.0.1 source-port 12 destination-port 14

# Enable INT globally.

[DeviceC] telemetry ifa global enable

3.     Configure Device B:

# Specify 10.0.0.2 as the device ID of the transit node.

<DeviceB> system-view

[DeviceB] telemetry ifa device-id 10.0.0.2

# Specify Twenty-FiveGigE 1/0/1 as the transit interface.

[DeviceB] interface twenty-fivegige 1/0/1

[DeviceB-Twenty-FiveGigE1/0/1] telemetry ifa role transit

[DeviceB-Twenty-FiveGigE1/0/1] quit

# Enable INT globally.

[DeviceB] telemetry ifa global enable

4.     Configure Device A:

# Specify 10.0.0.1 as the device ID of the entry node.

<DeviceA> system-view

[DeviceA] telemetry ifa device-id 10.0.0.1

# Specify Twenty-FiveGigE 1/0/1 as the ingress interface.

[DeviceA] interface twenty-fivegige 1/0/1

[DeviceA-Twenty-FiveGigE1/0/1] telemetry ifa role ingress

[DeviceA-Twenty-FiveGigE1/0/1] quit

# (For only S9850 series switches.) Enable internal loopback on Twenty-FiveGigE 1/0/3.

[DeviceA] interface twenty-fivegige 1/0/3

[DeviceA-Twenty-FiveGigE1/0/3] telemetry ifa loopback

[DeviceA-Twenty-FiveGigE1/0/3] quit

# Create a sampler named samp in random sampling mode, and set the sampling rate to 8. One packet from 256 packets is selected.

<DeviceA> system-view

[DeviceA] sampler samp mode random packet-interval n-power 8

# Create a traffic class named classifier1, and use destination MAC address a08c-fdd7-fd99 as the match criterion in the traffic class.

[DeviceA] traffic classifier classifier1

[DeviceA-classifier-classifier1] if-match destination-mac a08c-fdd7-fd99

[DeviceA-classifier-classifier1] quit

# Create a traffic behavior named behavior1, and configure the action of mirroring traffic to the INT processor.

[DeviceA] traffic behavior behavior1

[DeviceA-behavior-behavior1] mirror-to ifa-processor sampler samp

[DeviceA-behavior-behavior 1] quit

# Create a QoS policy named ifa1, and associate traffic class classifier1 with traffic behavior behavior1 in the QoS policy.

[DeviceA] qos policy ifa1

[DeviceA-qospolicy-ifa1] classifier classifier1 behavior behavior1

[DeviceA-qospolicy-ifa1] quit

# Apply QoS policy ifa1 to the incoming traffic of Twenty-FiveGigE 1/0/1.

[DeviceA] interface twenty-fivegige 1/0/1

[DeviceA-Twenty-FiveGigE1/0/1] qos apply policy ifa1 inbound

[DeviceA-Twenty-FiveGigE1/0/1] quit

# Enable INT globally.

[DeviceA] telemetry ifa global enable

Verify the configuration

# Verify the configuration on Device A.

[DeviceA] display qos policy interface twenty-fivegige 1/0/1 inbound

Interface: Twenty-FiveGigE1/0/1

  Direction: Inbound

  Policy: ifa1

   Classifier: classifier1

     Operator: AND

     Rule(s) :

      If-match destination-mac a08c-fdd7-fd99

     Behavior: behavior1

      Mirroring:

        Mirror to the ifa-processor sampler samp

[DeviceA] display telemetry ifa

  Telemetry ifa status: Enabled

  Telemetry ifa device-id: 10.0.0.1

  Telemetry ifa role:

    Twenty-FiveGigE1/0/1: Ingress

  Telemetry ifa loopback:

    Twenty-FiveGigE1/0/3

# Verify the configuration on Device B.

[DeviceB] display telemetry ifa

  Telemetry ifa status: Enabled

  Telemetry ifa device-id: 10.0.0.2

  Telemetry ifa role:

    Twenty-FiveGigE1/0/1: Transit

# Verify the configuration on Device C.

[DeviceC] display telemetry ifa

  Telemetry ifa status: Enabled

  Telemetry ifa device-id: 10.0.0.3

  Telemetry ifa role:

    Twenty-FiveGigE1/0/1: Egress

  Telemetry ifa collector:

    Source IP: 20.0.0.2

    Destination IP: 30.0.0.1

    Source-port: 12

    Destination-port: 14

Example: Configuring flexible INT

Network configuration

As shown in Figure 5, configure flexible INT to send INT packets to the collector.

Figure 5 Network diagram

 

Procedure

1.     Assign IP addresses to interfaces and configure routes. Make sure the network connections are available. (Details not shown.)

2.     Configure Device C:

# Specify 10.0.0.3 as the device ID of the exit node.

<DeviceC> system-view

[DeviceC] telemetry ifa device-id 10.0.0.3

# Create user-defined ACL 5000, and configure a rule to match INT packets with source IP address 192.168.1.2.

[DeviceC] acl user-defined 5000

[DeviceC-acl-user-5000] rule permit tcp source 192.168.1.2 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0

[DeviceC-acl-user-5000] rule permit udp source 192.168.1.2 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0

[DeviceC-acl-user-5000] quit

# Configure the action of mirroring incoming INT packets on Twenty-FiveGigE 1/0/1 to the INT processor and dropping the original INT packets.

[DeviceC] interface twenty-fivegige 1/0/1

[DeviceC-Twenty-FiveGigE1/0/1] telemetry ifa 1 acl user-defined 5000 action mirror-to-processor drop

[DeviceC-Twenty-FiveGigE1/0/1] quit

# Configure addressing parameters to encapsulate in INT packets sent to the collector.

[DeviceC] telemetry ifa collector source 20.0.0.2 destination 30.0.0.1 source-port 12 destination-port 14

# Enable INT globally.

[DeviceC] telemetry ifa global enable

3.     Configure Device B:

# Specify 10.0.0.2 as the device ID of the transit node.

<DeviceB> system-view

[DeviceB] telemetry ifa device-id 10.0.0.2

# Create user-defined ACL 5000, and configure a rule to match INT packets with source IP address 192.168.1.2.

[DeviceB] acl user-defined 5000

[DeviceB-acl-user-5000] rule permit tcp source 192.168.1.2 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0

[DeviceB-acl-user-5000] rule permit udp source 192.168.1.2 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0

[DeviceB-acl-user-5000] quit

# Configure the action of mirroring INT packets on Twenty-FiveGigE 1/0/1 to the INT processor.

[DeviceB] interface twenty-fivegige 1/0/1

[DeviceB-Twenty-FiveGigE1/0/1] telemetry ifa 1 acl user-defined 5000 action add-metadata

[DeviceB-Twenty-FiveGigE1/0/1] quit

# Enable INT globally.

[DeviceB] telemetry ifa global enable

4.     Configure Device A:

# Specify 10.0.0.1 as the device ID of the entry node.

<DeviceA> system-view

[DeviceA] telemetry ifa device-id 10.0.0.1

# Create a sampler named samp in random sampling mode, and set the sampling rate to 8. One packet from 256 packets is selected.

[DeviceA] sampler samp mode random packet-interval n-power 8

# Create IPv4 basic ACL 2000, and configure a rule to match packets with source IP address 192.168.1.2.

[DeviceA] acl basic 2000

[DeviceA-acl-ipv4-basic-2000] rule permit source 192.168.1.2 0

[DeviceA-acl-ipv4-basic-2000] quit

# Configure the action of mirroring original packets on Twenty-FiveGigE 1/0/1 to the INT processor.

[DeviceA] interface twenty-fivegige 1/0/1

[DeviceA-Twenty-FiveGigE1/0/1] telemetry ifa 2 acl 2000 action mirror-to-processor sampler samp

[DeviceA-Twenty-FiveGigE1/0/1] quit

# (For only S9850 series switches.) Enable internal loopback on Twenty-FiveGigE 1/0/3.

[DeviceA] interface twenty-fivegige 1/0/3

[DeviceA-Twenty-FiveGigE1/0/3] telemetry ifa loopback

[DeviceA-Twenty-FiveGigE1/0/3] quit

# Create user-defined ACL 5000, and configure a rule to match INT packets with source IP address 192.168.1.2.

[DeviceA] acl user-defined 5000

[DeviceA-acl-user-5000] rule permit tcp source 192.168.1.2 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0

[DeviceA-acl-user-5000] rule permit udp source 192.168.1.2 0 ifa l5 aaaaaaaabbbbbbbb ffffffffffffffff 0

[DeviceA-acl-user-5000] quit

# Configure the action of adding collected data to local loopback traffic.

[DeviceA] interface twenty-fivegige 1/0/1

[DeviceA-Twenty-FiveGigE1/0/1] telemetry ifa 3 acl user-defined 5000 local-loopback action add-metadata

[DeviceA-Twenty-FiveGigE1/0/1] quit

# Enable INT globally.

[DeviceA] telemetry ifa global enable

Verify the configuration

# Verify the configuration on Device A.

[DeviceA] display telemetry ifa

  Telemetry ifa status: Enabled

  Telemetry ifa device-id: 10.0.0.1

  Telemetry ifa action:

    Twenty-FiveGigE1/0/1:

      Telemetry ifa 1 acl 2000 action mirror-to-processor sampler samp

      Telemetry ifa 2 acl user-defined 5000 local-loopback action add-metadata

  Telemetry ifa loopback:

    Twenty-FiveGigE1/0/3

# Verify the configuration on Device B.

[DeviceB] display telemetry ifa

  Telemetry ifa status: Enabled

  Telemetry ifa device-id: 10.0.0.2

  Telemetry ifa action:

    Twenty-FiveGigE1/0/1:

      Telemetry ifa 1 acl user-defined 5000 action add-metadata

# Verify the configuration on Device C.

[DeviceC] display telemetry ifa

  Telemetry ifa status: Enabled

  Telemetry ifa device-id: 10.0.0.3

  Telemetry ifa action:

    Twenty-FiveGigE1/0/1:

      Telemetry ifa 1 acl user-defined 5000 action mirror-to-processor drop

  Telemetry ifa collector:

    Source IP: 20.0.0.2

    Destination IP: 30.0.0.1

    Source-port: 12

    Destination-port: 14

 

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网