- Table of Contents
-
- 05-Network Connectivity
- 00-Preface
- 01-About the network connectivity configuration guide
- 02-ARP configuration
- 03-DHCP configuration
- 04-DHCPv6 configuration
- 05-GRE configuration
- 06-IGMP snooping configuration
- 07-IP addressing configuration
- 08-Basic IP routing configuration
- 09-IP performance optimization configuration
- 10-IP forwarding basics configuration
- 11-L2TP configuration
- 12-LLDP configuration
- 13-MAC address table configuration
- 14-NAT configuration
- 15-PPP configuration
- 16-MLD snooping configuration
- 17-VLAN configuration
- 18-VLAN termination configuration
- 19-Policy-based routing configuration
- 20-Port isolation configuration
- 21-Layer 2 forwarding configuration
- 22-Loop detection configuration
- 23-RIP configuration
- 24-RIPng configuration
- 25-IPv6 static routing configuration
- 26-IPv6 policy-based routing configuration
- 27-IPv6 basics configuration
- 28-Static routing configuration
- 29-Spanning tree configuration
- 30-Tunneling configuration
- 31-Ethernet link aggregation configuration
- 32-DNS configuration
- 33-Multicast overview
- 34-Modem management configuration
- 35-3G and 4G modem management configuration
- Related Documents
-
Title | Size | Download |
---|---|---|
01-About the network connectivity configuration guide | 38.76 KB |
About the Network Connectivity Configuration Guide
The Network Connectivity Configuration Guide describes the software features for ensuring network connectivity and guides you through the software configuration procedures. The configuration guide also provides configuration examples to help you apply the software features to different network scenarios.
Feature category |
Content |
LAN switching features |
Covers the follow features: · MAC address table · Ethernet link aggregation · VLAN · Loop detection · Spanning tree · LLDP · Layer 2 forwarding · VLAN termination · Port isolation |
WAN access features |
Covers the following features: · PPP · L2TP |
IP services features |
Covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This category includes: · ARP · IP addressing · DHCP · DHCPv6 · DNS and DDNS · NAT · IP performance optimization · IPv6 basics · GRE · Tunneling |
IP routing features |
Covers the following features: · IP forwarding basics · Basic IP routing · Static routing (including default route configuration) · IPv6 static routing · Policy routing · IPv6 policy routing · RIP · RIPng |
IP multicast features |
Covers the following features: · Multicast overview · IGMP snooping · MLD snooping |