- Table of Contents
- Related Documents
-
Title | Size | Download |
---|---|---|
04-PMM commands | 52.66 KB |
PMM commands
The following compatibility matrixes show the support of hardware platforms for PMM:
Hardware series |
Model |
PMM compatibility |
WX2500H series |
WX2508H-PWR-LTE WX2510H WX2540H WX2560H |
Yes: WX2510H No: · WX2508H-PWR-LTE · WX2540H · WX2560H |
WX3000H series |
WX3010H WX3010H-L WX3010H-X WX3024H WX3024H-L |
No |
WX3500H series |
WX3508H WX3510H WX3520H WX3540H |
No |
WX5500E series |
WX5510E WX5540E |
No |
WX5500H series |
WX5540H WX5560H WX5580H |
No |
Access controller modules |
LSQM1WCMX20 LSQM1WCMX40 LSUM1WCME0 LSUM1WCMX20RT LSUM1WCMX40RT |
No |
Hardware series |
Model |
PMM compatibility |
WX1800H series |
WX1804H WX1810H WX1820H WX1840H |
No |
WX3800H series |
WX3820H WX3840H |
No |
WX5800H series |
WX5860H |
No |
pmm audit-format
Use pmm audit-format to specify the audit packet format.
Use undo pmm audit-format to restore the default.
Syntax
pmm audit-format { exands | rzx }
undo pmm audit-format
Default
The audit packet format is not specified.
Views
System view
Predefined user roles
network-admin
Parameters
exands: Specifies the exands format.
rzx: Specifies the rzx format, a format required by SURFILTER.
Examples
# Specify the audit packet format as rzx.
<Sysname> system-view
[sysname] pmm audit-format rzx
Related commands
pmm enable
pmm http server
pmm sftp server
pmm source-interface
pmm enable
Use pmm enable to enable packet monitor management (PMM).
Use undo pmm enable to disable PMM.
Syntax
pmm enable
undo pmm enable
Default
PMM is disabled.
Views
VLAN interface view
Predefined user roles
network-admin
Usage guidelines
After you enable PMM, the AP starts obtaining packets from clients and sends the packets to the xwtone server in xwtone format.
Examples
# Enable PMM for VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pmm enable
Related commands
pmm audit-format
pmm source-interface
pmm http server
Use pmm http server to specify the IP address of the exands server.
Use undo pmm http server to restore the default.
Syntax
pmm http server ipv4 ip-address
undo pmm http server
Default
The IP address of the exands server is not specified.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4 ip-address: Specifies the IPv4 address of the exands server in dotted decimal notation.
Examples
# Specify the IP address of the exands server as 59.40.79.91.
<Sysname> system-view
[Sysname] pmm http server ipv4 59.40.79.91
Related commands
pmm audit-format
pmm source-interface
Use pmm source-interface to specify the source interface for sending captured packets to a server.
Use undo pmm source-interface to restore the default.
Syntax
pmm source-interface interface-type interface-number
undo pmm source-interface
Default
The source interface for sending captured packets to a server is not specified.
Views
AP view
System view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies the interface type and number.
Examples
# Specify VLAN-interface 1 as the source interface for sending captured packets to a server.
<Sysname> system-view
[Sysname] pmm source-interface vlan-interface 1
Related commands
pmm audit-format
pmm enable
pmm sftp server