12-User Access and Authentication Configuration Guide

HomeSupportConfigure & DeployConfiguration GuidesH3C FAT AP Configuration Guide(R5436)-6W10112-User Access and Authentication Configuration Guide
03-AAA configuration
Title Size Download
03-AAA configuration 981.11 KB

Contents

Configuring AAA·· 1

About AAA· 1

AAA implementation· 1

AAA network diagram·· 1

RADIUS· 2

LDAP· 5

User management based on ISP domains and user access types· 8

Authentication, authorization, and accounting methods· 9

AAA tasks at a glance· 10

Configuring local users· 10

About local users· 10

Local user configuration tasks at a glance· 11

Configuring attributes for device management users· 11

Configuring attributes for network access users· 12

Configuring local guest attributes· 13

Configuring user group attributes· 14

Configuring local users in batch· 15

Managing local guests· 15

Display and maintenance commands for local users and local user groups· 17

Configuring RADIUS· 17

RADIUS tasks at a glance· 17

Configuring a test profile for RADIUS server status detection· 18

Creating a RADIUS scheme· 19

Specifying RADIUS authentication servers· 19

Specifying the RADIUS accounting servers· 20

Specifying the shared keys for secure RADIUS communication· 21

Setting the status of RADIUS servers· 21

Setting RADIUS timers· 22

Specifying the source IP address for outgoing RADIUS packets· 23

Setting the username format and traffic statistics units· 24

Setting the maximum number of RADIUS request transmission attempts· 25

Setting the maximum number of real-time accounting attempts· 25

Setting the DSCP priority for RADIUS packets· 26

Configuring the Login-Service attribute check method for SSH, FTP, and terminal users· 26

Interpreting the RADIUS class attribute as CAR parameters· 27

Configuring the format of the RADIUS Called-Station-Id attribute· 27

Configuring the MAC address format for the RADIUS Called-Station-Id attribute· 28

Configuring the MAC address format for the RADIUS Calling-Station-Id attribute· 28

Specifying a server version for interoperating with servers with a vendor ID of 2011· 29

Setting the data measurement unit for the Remanent_Volume attribute· 29

Interpreting the Microsegment-Id attribute to an authorization VLAN· 29

Specifying the format for attribute Acct-Session-Id· 30

Including the proprietary H3c-DHCP-Option attribute in outgoing RADIUS packets· 30

Configuring the RADIUS attribute translation feature· 31

Configuring the RADIUS accounting-on feature· 33

Configuring the RADIUS session-control feature· 33

Configuring the RADIUS DAS feature· 34

Enabling SNMP notifications for RADIUS· 34

Display and maintenance commands for RADIUS· 35

Configuring LDAP· 35

LDAP tasks at a glance· 35

Creating an LDAP server 35

Configuring the IP address of the LDAP server 36

Specifying the LDAP version· 36

Setting the LDAP server timeout period· 36

Configuring administrator attributes· 37

Configuring LDAP user attributes· 37

Configuring a user group filter 38

Configuring an LDAP attribute map· 38

Creating an LDAP scheme· 39

Specifying the LDAP authentication server 39

Specifying the LDAP authorization server 39

Specifying an LDAP attribute map for LDAP authorization· 40

Display and maintenance commands for LDAP· 40

Creating an ISP domain· 40

About ISP domains· 40

Restrictions and guidelines for ISP domain configuration· 41

Creating an ISP domain· 41

Specifying the default ISP domain· 41

Specifying an ISP domain for users that are assigned to nonexistent domains· 41

Configuring ISP domain attributes· 42

Setting ISP domain status· 42

Configuring authorization attributes for an ISP domain· 42

Including the idle timeout period in the user online duration to be sent to the server 43

Specifying the user address type in an ISP domain· 43

Specifying the service type for users in an ISP domain· 44

Configuring AAA methods for an ISP domain· 44

Configuring authentication methods for an ISP domain· 44

Configuring authorization methods for an ISP domain· 45

Configuring accounting methods for an ISP domain· 46

Display and maintenance commands for ISP domains· 47

Setting the maximum number of concurrent login users· 47

Configuring local BYOD authorization· 48

Configuring BYOD endpoint identification rules· 48

Configuring BYOD endpoint type-specific authorization attributes· 49

Display and maintenance commands for local BYOD authorization· 49

Configuring a NAS-ID·· 50

Configuring a NAS-ID profile· 50

Setting the NAS-ID in an ISP domain· 50

Configuring the device ID·· 51

Enabling password change prompt logging· 51

AAA configuration examples· 52

Example: Configuring authentication and authorization for SSH users by a RADIUS server 52

Example: Configuring authentication for SSH users by an LDAP server 55

Example: Configuring AAA for 802.1X users by a RADIUS server 60

Example: Configuring and managing a local guest 66

Troubleshooting AAA· 68

RADIUS authentication failure· 68

RADIUS packet delivery failure· 69

RADIUS accounting error 69

LDAP authentication failure· 70

Appendixes· 70

Appendix A Commonly used RADIUS attributes· 70

Appendix B Descriptions for commonly used standard RADIUS attributes· 72

Appendix C RADIUS subattributes (vendor ID 25506) 74

 


Configuring AAA

About AAA

AAA implementation

Authentication, Authorization, and Accounting (AAA) provides a uniform framework for implementing network access management. This feature specifies the following security functions:

·     Authentication—Identifies users and verifies their validity.

·     Authorization—Grants different users different rights, and controls the users' access to resources and services. For example, you can permit office users to read and print files and prevent guests from accessing files on the device.

·     Accounting—Records network usage details of users, including the service type, start time, and traffic. This function enables time-based and traffic-based charging and user behavior auditing.

AAA network diagram

AAA uses a client/server model. The client runs on the access device, or the network access server (NAS), which authenticates user identities and controls user access. The server maintains user information centrally. See Figure 1.

Figure 1 AAA network diagram

 

To access networks or resources beyond the NAS, a user sends its identity information to the NAS. The NAS transparently passes the user information to AAA servers and waits for the authentication, authorization, and accounting result. Based on the result, the NAS determines whether to permit or deny the access request.

AAA has various implementations, including LDAP and RADIUS. RADIUS is most often used.

You can choose the security functions provided by AAA as needed. For example, if your company wants employees to be authenticated before they access specific resources, you would deploy an authentication server. If network usage information is needed, you would also configure an accounting server.

The device performs dynamic password authentication.

RADIUS

Remote Authentication Dial-In User Service (RADIUS) is a distributed information interaction protocol that uses a client/server model. The protocol can protect networks against unauthorized access and is often used in network environments that require both high security and remote user access.

The RADIUS authorization process is combined with the RADIUS authentication process, and user authorization information is piggybacked in authentication responses. RADIUS uses UDP port 1812 for authentication and UDP port 1813 for accounting.

RADIUS was originally designed for dial-in user access, and has been extended to support additional access methods, such as Ethernet and ADSL.

Client/server model

The RADIUS client runs on the NASs located throughout the network. It passes user information to RADIUS servers and acts on the responses to, for example, reject or accept user access requests.

The RADIUS server runs on the computer or workstation at the network center and maintains information related to user authentication and network service access.

The RADIUS server operates using the following process:

1.     Receives authentication, authorization, and accounting requests from RADIUS clients.

2.     Performs user authentication, authorization, or accounting.

3.     Returns user access control information (for example, rejecting or accepting the user access request) to the clients.

The RADIUS server can also act as the client of another RADIUS server to provide authentication proxy services.

The RADIUS server maintains the following databases:

·     Users—Stores user information, such as the usernames, passwords, applied protocols, and IP addresses.

·     Clients—Stores information about RADIUS clients, such as shared keys and IP addresses.

·     Dictionary—Stores RADIUS protocol attributes and their values.

Figure 2 RADIUS server databases

 

Information exchange security mechanism

The RADIUS client and server exchange information between them with the help of shared keys, which are preconfigured on the client and server. A RADIUS packet has a 16-byte field called Authenticator. This field includes a signature generated by using the MD5 algorithm, the shared key, and some other information. The receiver of the packet verifies the signature and accepts the packet only when the signature is correct. This mechanism ensures the security of information exchanged between the RADIUS client and server.

The shared keys are also used to encrypt user passwords that are included in RADIUS packets.

User authentication methods

The RADIUS server supports multiple user authentication methods, such as PAP, CHAP, and EAP.

Basic RADIUS packet exchange process

Figure 3 illustrates the interactions between a user host, the RADIUS client, and the RADIUS server.

Figure 3 Basic RADIUS packet exchange process

 

RADIUS uses in the following workflow:

1.     The host sends a connection request that includes the user's username and password to the RADIUS client.

2.     The RADIUS client sends an authentication request (Access-Request) to the RADIUS server. The request includes the user's password, which has been processed by the MD5 algorithm and shared key.

3.     The RADIUS server authenticates the username and password. If the authentication succeeds, the server sends back an Access-Accept packet that contains the user's authorization information. If the authentication fails, the server returns an Access-Reject packet.

4.     The RADIUS client permits or denies the user according to the authentication result. If the result permits the user, the RADIUS client sends a start-accounting request (Accounting-Request) packet to the RADIUS server.

5.     The RADIUS server returns an acknowledgment (Accounting-Response) packet and starts accounting.

6.     The user accesses the network resources.

7.     The host requests the RADIUS client to tear down the connection.

8.     The RADIUS client sends a stop-accounting request (Accounting-Request) packet to the RADIUS server.

9.     The RADIUS server returns an acknowledgment (Accounting-Response) and stops accounting for the user.

10.     The RADIUS client notifies the user of the termination.

RADIUS packet format

RADIUS uses UDP to transmit packets. The protocol also uses a series of mechanisms to ensure smooth packet exchange between the RADIUS server and the client. These mechanisms include the timer mechanism, the retransmission mechanism, and the backup server mechanism.

Figure 4 RADIUS packet format

 

Descriptions of the fields are as follows:

·     The Code field (1 byte long) indicates the type of the RADIUS packet. Table 1 gives the main values and their meanings.

Table 1 Main values of the Code field

Code

Packet type

Description

1

Access-Request

From the client to the server. A packet of this type includes user information for the server to authenticate the user. It must contain the User-Name attribute and can optionally contain the attributes of NAS-IP-Address, User-Password, and NAS-Port.

2

Access-Accept

From the server to the client. If all attribute values included in the Access-Request are acceptable, the authentication succeeds, and the server sends an Access-Accept response.

3

Access-Reject

From the server to the client. If any attribute value included in the Access-Request is unacceptable, the authentication fails, and the server sends an Access-Reject response.

4

Accounting-Request

From the client to the server. A packet of this type includes user information for the server to start or stop accounting for the user. The Acct-Status-Type attribute in the packet indicates whether to start or stop accounting.

5

Accounting-Response

From the server to the client. The server sends a packet of this type to notify the client that it has received the Accounting-Request and has successfully recorded the accounting information.

 

·     The Identifier field (1 byte long) is used to match response packets with request packets and to detect duplicate request packets. The request and response packets of the same exchange process for the same purpose (such as authentication or accounting) have the same identifier.

·     The Length field (2 bytes long) indicates the length of the entire packet (in bytes), including the Code, Identifier, Length, Authenticator, and Attributes fields. Bytes beyond this length are considered padding and are ignored by the receiver. If the length of a received packet is less than this length, the packet is dropped.

·     The Authenticator field (16 bytes long) is used to authenticate responses from the RADIUS server and to encrypt user passwords. There are two types of authenticators: request authenticator and response authenticator.

·     The Attributes field (variable in length) includes authentication, authorization, and accounting information. This field can contain multiple attributes, each with the following subfields:

¡     Type—Type of the attribute.

¡     Length—Length of the attribute in bytes, including the Type, Length, and Value subfields.

¡     Value—Value of the attribute. Its format and content depend on the Type subfield.

Extended RADIUS attributes

The RADIUS protocol features excellent extensibility. The Vendor-Specific attribute (attribute 26) allows a vendor to define extended attributes. The extended attributes can implement functions that the standard RADIUS protocol does not provide.

A vendor can encapsulate multiple subattributes in the TLV format in attribute 26 to provide extended functions. As shown in Figure 5, a subattribute encapsulated in attribute 26 consists of the following parts:

·     Vendor-ID—ID of the vendor. The most significant byte is 0. The other three bytes contains a code compliant to RFC 1700.

·     Vendor-Type—Type of the subattribute.

·     Vendor-Length—Length of the subattribute.

·     Vendor-Data—Contents of the subattribute.

The device supports RADIUS subattributes with a vendor ID of 25506. For more information, see "Appendix C RADIUS subattributes (vendor ID 25506)."

Figure 5 Format of attribute 26

 

LDAP

The Lightweight Directory Access Protocol (LDAP) provides standard multiplatform directory service. LDAP was developed on the basis of the X.500 protocol. It improves the following functions of X.500:

·     Read/write interactive access.

·     Browse.

·     Search.

LDAP is suitable for storing data that does not often change. The protocol is used to store user information. For example, LDAP server software Active Directory Server is used in Microsoft Windows operating systems. The software stores the user information and user group information for user login authentication and authorization.

LDAP directory service

LDAP uses directories to maintain the organization information, personnel information, and resource information. The directories are organized in a tree structure and include entries. An entry is a set of attributes with distinguished names (DNs). The attributes are used to store information such as usernames, passwords, emails, computer names, and phone numbers.

LDAP uses a client/server model, and all directory information is stored in the LDAP server. Commonly used LDAP server products include Microsoft Active Directory Server, IBM Tivoli Directory Server, and Sun ONE Directory Server.

LDAP authentication and authorization

AAA can use LDAP to provide authentication and authorization services for users. LDAP defines a set of operations to implement its functions. The main operations for authentication and authorization are the bind operation and search operation.

·     The bind operation allows an LDAP client to perform the following operations:

¡     Establish a connection with the LDAP server.

¡     Obtain the access rights to the LDAP server.

¡     Check the validity of user information.

·     The search operation constructs search conditions and obtains the directory resource information of the LDAP server.

In LDAP authentication, the client completes the following tasks:

1.     Uses the LDAP server administrator DN to bind with the LDAP server. After the binding is created, the client establishes a connection to the server and obtains the right to search.

2.     Constructs search conditions by using the username in the authentication information of a user. The specified root directory of the server is searched and a user DN list is generated.

3.     Binds with the LDAP server by using each user DN and password. If a binding is created, the user is considered legal.

In LDAP authorization, the client performs the same tasks as in LDAP authentication. When the client constructs search conditions, it obtains both authorization information and the user DN list.

Basic LDAP authentication process

The following example illustrates the basic LDAP authentication process for a Telnet user.

Figure 6 Basic LDAP authentication process for a Telnet user

 

The following shows the basic LDAP authentication process:

1.     A Telnet user initiates a connection request and sends the username and password to the LDAP client.

2.     After receiving the request, the LDAP client establishes a TCP connection with the LDAP server.

3.     To obtain the right to search, the LDAP client uses the administrator DN and password to send an administrator bind request to the LDAP server.

4.     The LDAP server processes the request. If the bind operation is successful, the LDAP server sends an acknowledgment to the LDAP client.

5.     The LDAP client sends a user DN search request with the username of the Telnet user to the LDAP server.

6.     After receiving the request, the LDAP server searches for the user DN by the base DN, search scope, and filtering conditions. If a match is found, the LDAP server sends a response to notify the LDAP client of the successful search. There might be one or more user DNs found.

7.     The LDAP client uses the obtained user DN and the entered user password as parameters to send a user DN bind request to the LDAP server. The server will check whether the user password is correct.

8.     The LDAP server processes the request, and sends a response to notify the LDAP client of the bind operation result. If the bind operation fails, the LDAP client uses another obtained user DN as the parameter to send a user DN bind request to the LDAP server. This process continues until a DN is bound successfully or all DNs fail to be bound. If all user DNs fail to be bound, the LDAP client notifies the user of the login failure and denies the user's access request.

9.     The LDAP client saves the user DN that has been bound and exchanges authorization packets with the authorization server.

If LDAP authorization is used, see the authorization process shown in Figure 7.

If another method is expected for authorization, the authorization process of that method applies.

10.     After successful authorization, the LDAP client notifies the user of the successful login.

Basic LDAP authorization process

The following example illustrates the basic LDAP authorization process for a Telnet user.

Figure 7 Basic LDAP authorization process for a Telnet user

 

The following shows the basic LDAP authorization process:

1.     A Telnet user initiates a connection request and sends the username and password to the device. The device will act as the LDAP client during authorization.

2.     After receiving the request, the device exchanges authentication packets with the authentication server for the user:

¡     If LDAP authentication is used, see the authentication process shown in Figure 6.

-     If the device (the LDAP client) uses the same LDAP server for authentication and authorization, skip to step 6.

-     If the device (the LDAP client) uses different LDAP servers for authentication and authorization, skip to step 4.

¡     If another authentication method is used, the authentication process of that method applies. The device acts as the LDAP client. Skip to step 3.

3.     The LDAP client establishes a TCP connection with the LDAP authorization server.

4.     To obtain the right to search, the LDAP client uses the administrator DN and password to send an administrator bind request to the LDAP server.

5.     The LDAP server processes the request. If the bind operation is successful, the LDAP server sends an acknowledgment to the LDAP client.

6.     The LDAP client sends an authorization search request with the username of the Telnet user to the LDAP server. If the user uses the same LDAP server for authentication and authorization, the client sends the request with the saved user DN of the Telnet user to the LDAP server.

7.     After receiving the request, the LDAP server searches for the user information by the base DN, search scope, filtering conditions, and LDAP attributes. If a match is found, the LDAP server sends a response to notify the LDAP client of the successful search.

8.     After successful authorization, the LDAP client notifies the user of the successful login.

User management based on ISP domains and user access types

AAA manages users based on the users' ISP domains and access types.

On a NAS, each user belongs to one ISP domain. The NAS determines the ISP domain to which a user belongs based on the username entered by the user at login.

Figure 8 Determining the ISP domain for a user by username

 

AAA manages users in the same ISP domain based on the users' access types. The device supports the following user access types:

·     LAN—LAN users must pass 802.1X or MAC authentication to come online.

·     Login—Login users include SSH, Telnet, FTP, and terminal users that log in to the device. Terminal users can access through a console port.

·     Portal—Portal users must pass portal authentication to access the network.

·     IKE—IKE users must pass IKE extended authentication to access the network.

·     HTTP/HTTPS—Users log in to the device through HTTP or HTTPS.

The device also provides authentication modules (such as 802.1X) for implementation of user authentication management policies. If you configure these authentication modules, the ISP domains for users of the access types depend on the configuration of the authentication modules.

Authentication, authorization, and accounting methods

AAA supports configuring different authentication, authorization, and accounting methods for different types of users in an ISP domain. The NAS determines the ISP domain and access type of a user. The NAS also uses the methods configured for the access type in the domain to control the user's access.

AAA also supports configuring a set of default methods for an ISP domain. These default methods are applied to users for whom no AAA methods are configured.

Authentication methods

The device supports the following authentication methods:

·     No authentication—This method trusts all users and does not perform authentication. For security purposes, do not use this method.

·     Local authentication—The NAS authenticates users by itself, based on the locally configured user information including the usernames, passwords, and attributes. Local authentication allows high speed and low cost, but the amount of information that can be stored is limited by the size of the storage space.

·     Remote authentication—The NAS works with a remote server to authenticate users. The NAS communicates with the remote server through the RADIUS or LDAP protocol. The server manages user information in a centralized manner. Remote authentication provides high capacity, reliable, and centralized authentication services for multiple NASs. You can configure backup methods to be used when the remote server is not available.

Authorization methods

The device supports the following authorization methods:

·     No authorization—The NAS performs no authorization exchange. The following default authorization information applies after users pass authentication:

¡     Login users obtain the level-0 user role. For more information about the level-0 user role, see RBAC configuration in Fundamentals Configuration Guide.

¡     The working directory for FTP, SFTP, and SCP login users is the root directory of the NAS. However, the users do not have permission to access the root directory.

¡     Non-login users can access the network.

·     Local authorization—The NAS performs authorization according to the user attributes locally configured for users.

·     Remote authorization—The NAS works with a remote server to authorize users. RADIUS authorization is bound with RADIUS authentication. RADIUS authorization can work only after RADIUS authentication is successful, and the authorization information is included in the Access-Accept packet.

Accounting methods

The device supports the following accounting methods:

·     No accounting—The NAS does not perform accounting for the users.

·     Local accounting—Local accounting is implemented on the NAS. It counts and controls the number of concurrent users that use the same local user account, but does not provide statistics for charging.

·     Remote accounting—The NAS works with a remote server for accounting. You can configure backup methods to be used when the remote server is not available.

AAA tasks at a glance

To configure AAA, perform the following tasks:

1.     Configuring AAA schemes

If local authentication is used, configure local users and the related attributes. If remote authentication is used, configure the required RADIUS or LDAP schemes.

¡     Configuring local users

¡     Configuring RADIUS

¡     Configuring LDAP

2.     Configuring an ISP domain

a.     Creating an ISP domain

b.     Configuring ISP domain attributes

3.     Configuring AAA methods for an ISP domain

Configure authentication, authorization, and accounting methods for an ISP domain as needed. These methods use existing AAA schemes.

¡     Configuring authentication methods for an ISP domain

¡     Configuring authorization methods for an ISP domain

¡     Configuring accounting methods for an ISP domain

4.     (Optional.) Configuring advanced AAA features

¡     Setting the maximum number of concurrent login users

¡     Configuring local BYOD authorization

¡     Configuring the device ID

¡     Enabling password change prompt logging

Configuring local users

About local users

To implement local authentication, authorization, and accounting, create local users and configure user attributes on the device. The local users and attributes are stored in the local user database on the device. A local user is uniquely identified by the combination of a username and a user type.

Local users are classified into the following types:

·     Device management user—User that logs in to the device for device management.

·     Network access user—User that accesses network resources through the device.

Network access users also include guests that access the network temporarily. Guests can use only LAN and portal services.

The following shows the configurable local user attributes:

·     Description—Descriptive information of the user.

·     Service type—Services that the user can use. Local authentication checks the service types of a local user. If none of the service types is available, the user cannot pass authentication.

·     User state—Whether or not a local user can request network services. There are two user states: active and blocked. A user in active state can request network services, but a user in blocked state cannot.

·     Upper limit of concurrent logins using the same user name—Maximum number of users that can concurrently access the device by using the same user name. When the number reaches the upper limit, no more local users can access the device by using the user name.

·     User group—Each local user belongs to a local user group and has all attributes of the group. The attributes include the password control attributes and authorization attributes. For more information about local user group, see "Configuring user group attributes."

·     Binding attributes—Binding attributes control the scope of users, and are checked during local authentication of a user. If the attributes of a user do not match the binding attributes configured for the local user account, the user cannot pass authentication.

·     Authorization attributes—Authorization attributes indicate the user's rights after it passes local authentication.

Configure the authorization attributes based on the service type of local users.

You can configure an authorization attribute in user group view or local user view. The setting of an authorization attribute in local user view takes precedence over the attribute setting in user group view.

The attribute configured in user group view takes effect on all local users in the user group.

The attribute configured in local user view takes effect only on the local user.

·     Validity period—Time period in which a network access user is considered valid for authentication.

Local user configuration tasks at a glance

To configure local users, perform the following tasks:

1.     Configuring local user attributes

¡     Configuring attributes for device management users

¡     Configuring attributes for network access users

¡     Configuring local guest attributes

2.     (Optional.) Configuring user group attributes

3.     (Optional.) Configuring local users in batch

4.     (Optional.) Managing local guests

Configuring attributes for device management users

Restrictions and guidelines

You can configure authorization attributes and password control attributes in local user view or user group view. The setting in local user view takes precedence over the setting in user group view.

Procedure

1.     Enter system view.

system-view

2.     Add a device management user and enter device management user view.

local-user user-name class manage

3.     Configure a password for the device management user.

password [ { hash | simple } string ]

A non-password-protected user passes authentication if the user provides the correct username and passes attribute checks. To enhance security, configure a password for each device management user.

4.     Assign services to the device management user.

service-type { ftp | { http | https | ssh | telnet | terminal } * }

By default, no services are authorized to a device management user.

5.     (Optional.) Set the status of the device management user.

state { active | block }

By default, a device management user is in active state and can request network services.

6.     (Optional.) Set the upper limit of concurrent logins using the device management username.

access-limit max-user-number

By default, the number of concurrent logins is not limited for a device management user.

This command takes effect only when local accounting is configured for device management users. This command does not apply to FTP, SFTP, or SCP users that do not support accounting.

7.     (Optional.) Configure authorization attributes for the device management user.

authorization-attribute { idle-cut minutes | user-role role-name | work-directory directory-name } *

The following default settings apply:

¡     The working directory for FTP, SFTP, and SCP users is the root directory of the NAS. However, the users do not have permission to access the root directory.

¡     The network-operator user role is assigned to local users that are created by a network-admin or level-15 user.

8.     (Optional.) Assign the device management user to a user group.

group group-name

By default, a device management user belongs to user group system.

Configuring attributes for network access users

Restrictions and guidelines

You can configure authorization attributes in local user view or user group view. The setting in local user view takes precedence over the setting in user group view.

Configure the location binding attribute based on the service types of users.

·     For 802.1X users, specify the 802.1X-enabled Layer 2 Ethernet interfaces through which the users access the device.

·     For MAC authentication users, specify the MAC authentication-enabled Layer 2 Ethernet interfaces through which the users access the device.

·     For portal users, specify the portal-enabled interfaces through which the users access the device. Specify the Layer 2 Ethernet interfaces if portal is enabled on VLAN interfaces and the portal roaming enable command is not used.

Procedure

1.     Enter system view.

system-view

2.     Add a network access user and enter network access user view.

local-user user-name class network

3.     (Optional.) Configure a password for the network access user.

password { cipher | simple } string

4.     (Optional.) Configure a description for the network access user.

description text

By default, no description is configured for a local user.

5.     Assign services to the network access user.

service-type { ike | lan-access | portal }

By default, no services are authorized to a network access user.

6.     (Optional.) Set the status of the network access user.

state { active | block }

By default, a network access user is in active state and can request network services.

7.     (Optional.) Set the upper limit of concurrent logins using the network access username.

access-limit max-user-number

By default, the number of concurrent logins is not limited for a network access user.

8.     (Optional.) Configure binding attributes for the network access user.

bind-attribute { ip ip-address | location interface interface-type interface-number | mac mac-address | vlan vlan-id } *

By default, no binding attributes are configured for a network access user.

9.     (Optional.) Configure authorization attributes for the network access user.

authorization-attribute { acl acl-number | callback-number callback-number | idle-cut minutes | ip ipv4-address | ip-pool ipv4-pool-name | ipv6 ipv6-address | ipv6-pool ipv6-pool-name | ipv6-prefix ipv6-prefix prefix-length | { primary-dns | secondary-dns } { ip ipv4-address | ipv6 ipv6-address } | session-timeout minutes | url url-string | user-profile profile-name | vlan vlan-id } *

By default, a network access user does not have authorization attributes.

10.     (Optional.) Assign the network access user to a user group.

group group-name

By default, a network access user belongs to user group system.

11.     (Optional.) specify the validity period for the local user.

validity-datetime { from start-date start-time to expiration-date expiration-time | from start-date start-time | to expiration-date expiration-time }

By default, the validity period for a network access user does not expire.

Configuring local guest attributes

About this task

Create local guests and configure guest attributes to control temporary network access behavior. Guests can access the network after passing local authentication. You can configure the recipient addresses and email attribute information to the local guests and guest sponsors.

Procedure

1.     Enter system view.

system-view

2.     Create a local guest and enter local guest view.

local-user user-name class network guest

3.     (Optional.) Configure a password for the local guest.

password { cipher | simple } string

4.     Configure basic information for the local guest. Choose the following tasks as needed:

¡     Configure a description for the local guest.

description text

By default, no description is configured for a local guest.

¡     Specify the name of the local guest.

full-name name-string

By default, no name is specified for a local guest.

¡     Specify the company of the local guest.

company company-name

By default, no company is specified for a local guest.

¡     Specify the phone number of the local guest.

phone phone-number

By default, no phone number is specified for a local guest.

¡     Specify the email address of the local guest.

email email-string

By default, no email address is specified for a local guest.

¡     Specify the sponsor name for the local guest.

sponsor-full-name name-string

By default, no sponsor name is specified for a local guest.

¡     Specify the sponsor department for the local guest.

sponsor-department department-string

By default, no sponsor department is specified for a local guest.

¡     Specify the sponsor email address for the local guest.

sponsor-email email-string

By default, no sponsor email address is specified for a local guest.

5.     (Optional.) Configure the validity period for the local guest.

validity-datetime from start-date start-time to expiration-date expiration-time

By default, a local guest does not expire.

6.     (Optional.) Assign the local guest to a user group.

group group-name

By default, a local guest belongs to the system-defined user group system.

7.     (Optional.) Configure the local guest status.

state { active | block }

By default, a local guest is in active state and is allowed to request network services.

Configuring user group attributes

About this task

User groups simplify local user configuration and management. A user group contains a group of local users and has a set of local user attributes. You can configure local user attributes for a user group to implement centralized user attributes management for the local users in the group. Local user attributes that are manageable include authorization attributes.

Procedure

1.     Enter system view.

system-view

2.     Create a user group and enter user group view.

user-group group-name

By default, a system-defined user group exists. The group name is system.

3.     Configure authorization attributes for the user group.

authorization-attribute { acl acl-number | callback-number callback-number | idle-cut minutes | ip-pool ipv4-pool-name | ipv6-pool ipv6-pool-name | ipv6-prefix ipv6-prefix prefix-length | { primary-dns | secondary-dns } { ip ipv4-address | ipv6 ipv6-address } | session-timeout minutes | url url-string | user-profile profile-name | vlan vlan-id | work-directory directory-name } *

By default, no authorization attributes are configured for a user group.

4.     Configure authorization attributes for a type of BYOD endpoints in the user group.

byod authorization device-type type-name { acl acl-number | callback-number callback-number | idle-cut minutes | ip-pool ipv4-pool-name | ipv6-pool ipv6-pool-name | ipv6-prefix ipv6-prefix prefix-length | { primary-dns | secondary-dns } { ip ipv4-address | ipv6 ipv6-address } | session-timeout minutes | url url-string | user-profile profile-name | vlan vlan-id } *

By default, no authorization attributes are configured for any type of BYOD endpoints in the user group.

The attributes apply to local BYOD authorization and take effect only on network access users.

Configuring local users in batch

About this task

You can import or export local network access users in batch.

Importing local users in batch

1.     Enter system view.

system-view

2.     Import user account information from a .csv file in the specified path to create network access users based on the imported information.

local-user-import class network url url-string [ auto-create-group | override | start-line line-number ] *

Make sure the .csv file contains at least the user name for each account. If other parameters are not specified for accounts in the file, the system automatically assigns them default values.

Managing local guests

About this task

The local guest management features are for registration, approval, maintenance, and access control of local guests.

The registration and approval processes are as follows:

1.     The device pushes the portal user registration page to a user that wants to access the network as a local guest.

2.     The user submits account information for registration, including the user name, password, and email address.

3.     The device forwards the registration request to the guest manager in an email notification.

4.     The guest manager adds supplementary information as needed and approves the registration information.

The guest manager must process the registration request before the waiting-approval timeout timer expires. The device automatically deletes expired registration request information.

5.     The device creates a local guest account and sends an email notification to the user and guest sponsor. The email contains local guest account, password, validity period, and other account information.

The user can access the network as a local guest.

The device provides the following local guest management features:

·     Registration and approval—The device creates local guests after the guest registration information is approved by a guest manager.

·     Email notification—The device notifies the local guests, guest sponsors, or guest managers by email of the guest account information or guest registration requests.

·     Local guest creation in batch—Create a batch of local guests.

·     Local guest import—Import guest account information from a .csv file to create local guests on the device based on the imported information.

·     Local guest export—Export local guest account information to a .csv file. You can import the account information to other devices as needed.

·     Guest auto-delete—The device checks the validity status of each local guest and automatically deletes expired local guests.

Procedure

1.     Enter system view

system-view

2.     Configure the email notification feature for local guests.

a.     Configure the subject and body of email notifications.

local-guest email format to { guest | manager | sponsor } { body body-string | subject sub-string }

By default, no subject or body is configured.

b.     Configure the email sender address in the email notifications sent by the device for local guests.

local-guest email sender email-address

By default, no email sender address is configured for the email notifications sent by the device.

c.     Specify an SMTP server for sending email notifications of local guests.

local-guest email smtp-server url-string

By default, no SMTP server is specified.

3.     Configure the guest manager's email address.

local-guest manager-email email-address

By default, the guest manager's email address is not configured.

4.     (Optional.) Set the waiting-approval timeout timer for guest registration requests.

local-guest timer waiting-approval time-value

By default, the waiting-approval timeout timer for guest registration requests is 24 hours.

5.     (Optional.) Import guest account information from a .csv file in the specified path to create local guests based on the imported information.

local-user-import class network guest url url-string validity-datetime start-date start-time to expiration-date expiration-time [ auto-create-group | override | start-line line-number ] *

6.     (Optional.) Create local guests in batch.

local-guest generate username-prefix name-prefix [ password-prefix password-prefix ] suffix suffix-number [ group group-name ] count user-count validity-datetime start-date start-time to expiration-date expiration-time

Batch generated local guests share the same name prefix. You can also configure a password prefix to be shared by the guests.

7.     (Optional.) Export local guest account information to a .csv file in the specified path.

local-user-export class network guest url url-string

8.     (Optional.) Enable the guest auto-delete feature.

local-guest auto-delete enable

By default, the guest auto-delete feature is disabled.

9.     (Optional.) Send email notifications to the local guest or the guest sponsor.

a.     Return to user view.

quit

b.     Send email notifications to the local guest or the guest sponsor. The email contents include the user name, password, and validity period of the guest account.

local-guest send-email user-name user-name to { guest | sponsor }

Display and maintenance commands for local users and local user groups

Execute display commands in any view and reset commands in user view.

 

Task

Command

Display pending registration requests for local guests.

display local-guest waiting-approval [ user-name user-name ]

Display the local user configuration and online user statistics.

display local-user [ class { manage | network [ guest ] } | idle-cut { disable | enable } | service-type { ftp | http | https | ike | lan-access | portal | ssh | telnet | terminal } | state { active | block } | user-name user-name class { manage | network [ guest ] } | vlan vlan-id ]

Display user group configuration.

display user-group { all | name group-name [ byod-authorization ] }

Clear pending registration requests for local guests.

reset local-guest waiting-approval [ user-name user-name ]

 

Configuring RADIUS

RADIUS tasks at a glance

To configure RADIUS, perform the following tasks:

1.     Configuring a test profile for RADIUS server status detection

To detect the status of a RADIUS server, you must configure a test profile and configure the RADIUS server to use the test profile in a RADIUS scheme.

2.     Creating a RADIUS scheme

3.     Specifying RADIUS authentication servers

4.     Specifying the RADIUS accounting servers

5.     Specifying the shared keys for secure RADIUS communication

Perform this task if no shared keys are specified when configuring RADIUS authentication or accounting servers.

6.     (Optional.) Setting the status of RADIUS servers

7.     (Optional.) Setting RADIUS timers

8.     (Optional.) Configuring parameters for RADIUS packets

¡     Specifying the source IP address for outgoing RADIUS packets

¡     Setting the username format and traffic statistics units

¡     Setting the maximum number of RADIUS request transmission attempts

¡     Setting the maximum number of real-time accounting attempts

¡     Setting the DSCP priority for RADIUS packets

9.     (Optional.) Configuring parameters for RADIUS attributes

¡     Configuring the Login-Service attribute check method for SSH, FTP, and terminal users

¡     Interpreting the RADIUS class attribute as CAR parameters

¡     Configuring the format of the RADIUS Called-Station-Id attribute

¡     Configuring the MAC address format for the RADIUS Called-Station-Id attribute

¡     Configuring the MAC address format for the RADIUS Calling-Station-Id attribute

¡     Specifying a server version for interoperating with servers with a vendor ID of 2011

¡     Setting the data measurement unit for the Remanent_Volume attribute

¡     Interpreting the Microsegment-Id attribute to an authorization VLAN

¡     Specifying the format for attribute Acct-Session-Id

¡     Including the proprietary H3c-DHCP-Option attribute in outgoing RADIUS packets

¡     Configuring the RADIUS attribute translation feature

10.     (Optional.) Configuring extended RADIUS features

¡     Configuring the RADIUS accounting-on feature

¡     Configuring the RADIUS session-control feature

¡     Configuring the RADIUS DAS feature

¡     Enabling SNMP notifications for RADIUS

Configuring a test profile for RADIUS server status detection

About this task

To detect the reachability of a RADIUS authentication server, specify a test profile for the RADIUS server when you specify the server in a RADIUS scheme. With the test profile, the device refreshes the RADIUS server status at the end of each detection according to the detection result. If the server is unreachable, the device sets the status of the server to blocked. If the server is reachable, the device sets the status of the server to active.

After you specify an existing test profile, the device starts to probe the server status at the probe interval by sending a simulated authentication request with the specified username to the server. After the specified number of consecutive probes finish, the device determines the server status as follows:

·     If the device receives a response from the server in each probe, the device determines that the RADIUS server is reachable.

·     If the device does not receive a response from the server in any probe, the device determines that the server is unreachable.

·     In other situations, the device determines that the status of the server has not changed.

Restrictions and guidelines

You can configure multiple test profiles in the system.

The device stops detecting the status of a RADIUS server when one of the following operations is performed:

·     The RADIUS server is removed from the RADIUS scheme.

·     The test profile configuration for the RADIUS server is removed in RADIUS scheme view.

·     The test profile specified for the RADIUS server is deleted.

·     The RADIUS server is manually set to the blocked state.

·     The RADIUS scheme that contains the RADIUS server is deleted.

Procedure

1.     Enter system view.

system-view

2.     Configure a test profile for detecting the status of RADIUS authentication servers.

radius-server test-profile profile-name username name [ interval interval ] [ probe-count count ]

Creating a RADIUS scheme

Restrictions and guidelines

You can configure a maximum of 16 RADIUS schemes. A RADIUS scheme can be used by multiple ISP domains.

Procedure

1.     Enter system view.

system-view

2.     Create a RADIUS scheme and enter RADIUS scheme view.

radius scheme radius-scheme-name

Specifying RADIUS authentication servers

About this task

A RADIUS authentication server completes authentication and authorization together, because authorization information is piggybacked in authentication responses sent to RADIUS clients.

You can specify one primary authentication server and a maximum of 16 secondary authentication servers for a RADIUS scheme. Secondary servers provide AAA services when the primary server becomes unreachable. The device searches for an active server in the order the secondary servers are configured.

Restrictions and guidelines

If redundancy is not required, specify only the primary server.

A RADIUS authentication server can function as the primary authentication server for one scheme and a secondary authentication server for another scheme at the same time.

Two authentication servers in a scheme, primary or secondary, cannot have the same combination of IP address and port number.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Specify the primary RADIUS authentication server.

primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string | test-profile profile-name ] *

By default, no primary RADIUS authentication server is specified.

4.     (Optional.) Specify a secondary RADIUS authentication server.

secondary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string | test-profile profile-name ] *

By default, no secondary RADIUS authentication servers are specified.

Specifying the RADIUS accounting servers

About this task

You can specify one primary accounting server and a maximum of 16 secondary accounting servers for a RADIUS scheme. Secondary servers provide AAA services when the primary server becomes unavailable. The device searches for an active server in the order the secondary servers are configured.

Restrictions and guidelines

If redundancy is not required, specify only the primary server.

A RADIUS accounting server can function as the primary accounting server for one scheme and a secondary accounting server for another scheme at the same time.

Two accounting servers in a scheme, primary or secondary, cannot have the same combination of IP address and port number.

RADIUS does not support accounting for FTP, SFTP, and SCP users.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Specify the primary RADIUS accounting server.

primary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string ] *

By default, no primary RADIUS accounting server is specified.

4.     (Optional.) Specify a secondary RADIUS accounting server.

secondary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string ] *

By default, no secondary RADIUS accounting servers are specified.

Specifying the shared keys for secure RADIUS communication

About this task

The RADIUS client and server use the MD5 algorithm and shared keys to generate the Authenticator value for packet authentication and user password encryption. The client and server must use the same key for each type of communication.

A key configured in this task is for all servers of the same type (accounting or authentication) in the scheme. The key has a lower priority than a key configured individually for a RADIUS server.

Restrictions and guidelines

The shared key configured on the device must be the same as the shared key configured on the RADIUS server.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Specify a shared key for secure RADIUS communication.

key { accounting | authentication } { cipher | simple } string

By default, no shared key is specified for secure RADIUS communication.

Setting the status of RADIUS servers

About this task

To control the RADIUS servers with which the device communicates when the current servers are no longer available, set the status of RADIUS servers to blocked or active. You can specify one primary RADIUS server and multiple secondary RADIUS servers. The secondary servers function as the backup of the primary server. The device chooses servers based on the following rules:

·     When the primary server is in active state, the device first tries to communicate with the primary server. If the primary server is unreachable, the device searches for an active secondary server in the order the servers are configured.

·     When one or more servers are in active state, the device tries to communicate with these active servers only, even if the servers are unavailable.

·     When all servers are in blocked state, the device only tries to communicate with the primary server.

·     If a server is unreachable, the device performs the following operations:

¡     Changes the server status to blocked.

¡     Starts a quiet timer for the server.

¡     Tries to communicate with the next secondary server in active state that has the highest priority.

·     When the quiet timer of a server expires or you manually set the server to the active state, the status of the server changes back to active. The device does not check the server again during the authentication or accounting process.

·     The search process continues until the device finds an available secondary server or has checked all secondary servers in active state. If no server is reachable, the device considers the authentication or accounting attempt a failure.

·     When you remove a server in use, communication with the server times out. The device looks for a server in active state by first checking the primary server, and then checking secondary servers in the order they are configured.

·     When a RADIUS server's status changes automatically, the device changes this server's status accordingly in all RADIUS schemes in which this server is specified.

·     When a RADIUS server is manually set to blocked, server detection is disabled for the server, regardless of whether a test profile has been specified for the server. When the RADIUS server is set to active state, server detection is enabled for the server on which an existing test profile is specified.

By default, the device sets the status of all RADIUS servers to active. However, in some situations, you must change the status of a server. For example, if a server fails, you can change the status of the server to blocked to avoid communication attempts to the server.

Restrictions and guidelines

The configured server status cannot be saved to any configuration file, and can only be viewed by using the display radius scheme command.

After the device restarts, all servers are restored to the active state.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Set the RADIUS server status. Choose the following tasks as needed:

¡     Set the status of the primary RADIUS authentication server.

state primary authentication { active | block }

¡     Set the status of the primary RADIUS accounting server.

state primary accounting { active | block }

¡     Set the status of a secondary RADIUS authentication server.

state secondary authentication [ { ipv4-address | ipv6 ipv6-address } [ port-number ] ] { active | block }

¡     Set the status of a secondary RADIUS accounting server.

state secondary accounting [ { ipv4-address | ipv6 ipv6-address } [ port-number ] ] { active | block }

By default, a RADIUS server is in active state.

Setting RADIUS timers

About this task

The device uses the following types of timers to control communication with a RADIUS server:

·     Server response timeout timer (response-timeout)—Defines the RADIUS request retransmission interval. The timer starts immediately after a RADIUS request is sent. If the device does not receive a response from the RADIUS server before the timer expires, it resends the request.

·     Server quiet timer (quiet)—Defines the duration to keep an unreachable server in blocked state. If one server is not reachable, the device changes the server status to blocked, starts this timer for the server, and tries to communicate with another server in active state. After the server quiet timer expires, the device changes the status of the server back to active.

·     Real-time accounting timer (realtime-accounting)—Defines the interval at which the device sends real-time accounting packets to the RADIUS accounting server for online users.

Restrictions and guidelines

Consider the number of secondary servers when you configure the maximum number of RADIUS packet transmission attempts and the RADIUS server response timeout timer. If the RADIUS scheme includes many secondary servers, the retransmission process might be too long and the client connection in the access module, such as Telnet, can time out.

When the client connections have a short timeout period, a large number of secondary servers can cause the initial authentication or accounting attempt to fail. In this case, reconnect the client rather than adjusting the RADIUS packet transmission attempts and server response timeout timer. Typically, the next attempt will succeed, because the device has blocked the unreachable servers to shorten the time to find a reachable server.

Make sure the server quiet timer is set correctly. A timer that is too short might result in frequent authentication or accounting failures. This is because the device will continue to attempt to communicate with an unreachable server that is in active state. A timer that is too long might temporarily block a reachable server that has recovered from a failure. This is because the server will remain in blocked state until the timer expires.

A short real-time accounting interval helps improve accounting precision but requires many system resources. When there are 1000 or more users, set the interval to 15 minutes or longer.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Set RADIUS timers. Choose the following tasks as needed:

¡     Set the RADIUS server response timeout timer.

timer response-timeout seconds

The default setting is 3 seconds.

¡     Set the quiet timer for the servers.

timer quiet minutes

The default setting is 5 minutes.

¡     Set the real-time accounting timer.

timer realtime-accounting interval [ second ]

The default setting is 12 minutes.

Specifying the source IP address for outgoing RADIUS packets

About this task

The source IP address of RADIUS packets that a NAS sends must match the IP address of the NAS configured on the RADIUS server. A RADIUS server identifies a NAS by its IP address. Upon receiving a RADIUS packet, the RADIUS server checks the source IP address of the packet.

·     If it is the IP address of a managed NAS, the server processes the packet.

·     If it is not the IP address of a managed NAS, the server drops the packet.

Before sending a RADIUS packet, the NAS selects a source IP address in the following order:

1.     The source IP address specified for the RADIUS scheme.

1.     The source IP address specified in system view.

2.     The IP address of the outbound interface specified by the route.

Restrictions and guidelines for source IP address configuration

You can specify a source IP address for outgoing RADIUS packets in RADIUS scheme view or in system view.

·     The IP address specified in RADIUS scheme view applies only to one RADIUS scheme.

·     The IP address specified in system view applies to all RADIUS schemes.

The source IP address of RADIUS packets that a NAS sends must match the IP address of the NAS that is configured on the RADIUS server.

As a best practice, specify a loopback interface address as the source IP address for outgoing RADIUS packets to avoid RADIUS packet loss caused by physical port errors.

The source address of outgoing RADIUS packets is typically the IP address of an egress interface on the NAS to communicate with the RADIUS server.

Specifying a source IP address for all RADIUS schemes

1.     Enter system view.

system-view

2.     Specify a source IP address for outgoing RADIUS packets.

radius nas-ip { ipv4-address | ipv6 ipv6-address }

By default, the source IP address of an outgoing RADIUS packet is the primary IPv4 address or the IPv6 address of the outbound interface.

Specifying a source IP address for a RADIUS scheme

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Specify a source IP address for outgoing RADIUS packets.

nas-ip { ipv4-address | ipv6 ipv6-address }

By default, the source IP address of an outgoing RADIUS packet is that specified by using the radius nas-ip command in system view. If the radius nas-ip command is not used, the source IP address is the primary IP address of the outbound interface.

Setting the username format and traffic statistics units

About this task

A username is in the userid@isp-name format, where the isp-name part represents the user's ISP domain name. By default, the ISP domain name is included in a username. However, older RADIUS servers might not recognize usernames that contain the ISP domain names. In this case, you can configure the device to remove the domain name of each username to be sent.

The device reports online user traffic statistics in accounting packets. The traffic measurement units are configurable.

Restrictions and guidelines

If two or more ISP domains use the same RADIUS scheme, configure the RADIUS scheme to keep the ISP domain name in usernames for domain identification.

For accounting accuracy, make sure the traffic statistics units configured on the device and on the RADIUS accounting servers are the same.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Set the format for usernames sent to the RADIUS servers.

user-name-format { keep-original | with-domain | without-domain }

By default, the ISP domain name is included in a username.

4.     Set the data flow and packet measurement units for traffic statistics.

data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet | kilo-packet | mega-packet | one-packet } }*

By default, traffic is counted in bytes and packets.

Setting the maximum number of RADIUS request transmission attempts

About this task

RADIUS uses UDP packets to transfer data. Because UDP communication is not reliable, RADIUS uses a retransmission mechanism to improve reliability. A RADIUS request is retransmitted if the NAS does not receive a server response for the request within the response timeout timer. For more information about the RADIUS server response timeout timer, see "Setting the status of RADIUS servers."

You can set the maximum number for the NAS to retransmit a RADIUS request to the same server. When the maximum number is reached, the NAS tries to communicate with other RADIUS servers in active state. If no other servers are in active state at the time, the NAS considers the authentication or accounting attempt a failure.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Set the maximum number of RADIUS request transmission attempts.

retry retries

By default, the maximum number is 3 for RADIUS request transmission attempts.

Setting the maximum number of real-time accounting attempts

About this task

If you set the maximum number of real-time accounting attempts, the device will disconnect users from whom no accounting responses are received within the permitted attempts.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Set the maximum number of real-time accounting attempts.

retry realtime-accounting retries

By default, the maximum number is 5 for real-time accounting attempts.

Setting the DSCP priority for RADIUS packets

About this task

The DSCP priority in the ToS field determines the transmission priority of RADIUS packets. A larger value represents a higher priority.

Procedure

1.     Enter system view.

system-view

2.     Set the DSCP priority for RADIUS packets.

radius [ ipv6 ] dscp dscp-value

By default, the DSCP priority is 0 for RADIUS packets.

Configuring the Login-Service attribute check method for SSH, FTP, and terminal users

About this task

The device supports the following check methods for the Login-Service attribute (RADIUS attribute 15) of SSH, FTP, and terminal users:

·     Strict—Matches Login-Service attribute values 50, 51, and 52 for SSH, FTP, and terminal services, respectively.

·     Loose—Matches the standard Login-Service attribute value 0 for SSH, FTP, and terminal services.

An Access-Accept packet received for a user must contain the matching attribute value. Otherwise, the user cannot log in to the device.

Restrictions and guidelines

Use the loose check method only when the server does not issue Login-Service attribute values 50, 51, and 52 for SSH, FTP, and terminal users.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Configure the Login-Service attribute check method for SSH, FTP, and terminal users.

attribute 15 check-mode { loose | strict }

The default check method is strict.

Interpreting the RADIUS class attribute as CAR parameters

About this task

A RADIUS server may deliver CAR parameters for user-based traffic monitoring and control by using the RADIUS class attribute (attribute 25) in RADIUS packets. You can configure the device to interpret the class attribute to CAR parameters.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Interpret the RADIUS class attribute as CAR parameters.

attribute 25 car

By default, the RADIUS class attribute is not interpreted as CAR parameters.

Configuring the format of the RADIUS Called-Station-Id attribute

About this task

In a wireless network, RADIUS servers of different types might have different requirements for the format of the RADIUS Called-Station-Id attribute (attribute 30). The device supports the following formats:

·     AP name. For example, ap1.

·     AP MAC. For example, 0AC1-F9B2-B1C2.

·     AP MAC plus delimiter plus SSID. For example, 0AC1-F9B2-B1C2:test1, in which 0AC1-F9B2-B1C2 is the AP's MAC address, test1 is the SSID, and a colon (:) is used as the delimiter.

·     AP name plus delimiter plus SSID. For example, ap1-test1, in which ap1 is the AP's name, test1 is the SSID, and a hyphen (-) is used as the delimiter.

The format of the MAC address in this attribute can be customized by using the attribute 30 mac-format command.

Restrictions and guidelines

This configuration takes effect only on RADIUS packets for portal, 802.1X, and MAC authentication users in a wireless network.

Make sure the format of the Called-Station-Id attribute meets the requirements of the RADIUS servers.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Configure the format of the RADIUS Called-Station-Id attribute.

attribute 30 format { apmac-only | apname-only | { apmac-ssid | apname-ssid } delimiter { colon | hyphen } }

By default, the RADIUS Called-Station-Id attribute is in the format of HH-HH-HH-HH-HH-HH:SSID. The HH-HH-HH-HH-HH-HH argument is the AP's MAC address, the SSID argument is the SSID, and a colon (:) is used as the delimiter.

Configuring the MAC address format for the RADIUS Called-Station-Id attribute

Restrictions and guidelines

RADIUS servers of different types might have different requirements for the MAC address format in the RADIUS Called-Station-Id attribute. Configure the MAC address format for this attribute to meet the requirements of the RADIUS servers.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Configure the MAC address format for the RADIUS Called-Station-Id attribute.

attribute 30 mac-format section { one | { six | three } separator separator-character } { lowercase | uppercase }

By default, the MAC address in the RADIUS Called-Station-Id attribute is in the format of HH-HH-HH-HH-HH-HH. The MAC address is separated by hyphen (-) into six sections with letters in upper case.

Configuring the MAC address format for the RADIUS Calling-Station-Id attribute

Restrictions and guidelines

RADIUS servers of different types might have different requirements for the MAC address format in the RADIUS Calling-Station-Id attribute (attribute 31). Configure the MAC address format for this attribute to meet the requirements of the RADIUS servers.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Configure the MAC address format for the RADIUS Calling-Station-Id attribute.

attribute 31 mac-format section { one | { six | three } separator separator-character } { lowercase | uppercase }

By default, the MAC address in the RADIUS Calling-Station-Id attribute is in the format of HH-HH-HH-HH-HH-HH. The MAC address is separated by hyphen (-) into six sections with letters in upper case.

Specifying a server version for interoperating with servers with a vendor ID of 2011

About this task

For the device to correctly interpret RADIUS attributes from the servers with a vendor ID of 2011, specify a server version that is the same as the version of the RADIUS servers.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Specify a server version for interoperating with servers with a vendor ID of 2011.

attribute vendor-id 2011 version { 1.0 | 1.1 }

By default, version 1.0 is used.

Setting the data measurement unit for the Remanent_Volume attribute

About this task

The RADIUS server uses the Remanent_Volume attribute in authentication or real-time accounting responses to notify the device of the current amount of data available for online users.

Restrictions and guidelines

Make sure the configured measurement unit is the same as the user data measurement unit on the RADIUS server.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Set the data measurement unit for the Remanent_Volume attribute.

attribute remanent-volume unit { byte | giga-byte | kilo-byte | mega-byte }

By default, the data measurement unit is kilobyte.

Interpreting the Microsegment-Id attribute to an authorization VLAN

About this task

Use this feature only when the RADIUS server uses authorization microsegment IDs for granular user access control and the access device uses authorization VLANs to implement microsegment-based access control.

This feature enables the device to interpret the RADIUS Microsegment-Id attribute (attribute 182 with vendor ID 25506) assigned by the RADIUS server to an authorization VLAN.

·     If the attribute value is an integer, the device interprets this attribute to a VLAN ID.

·     If the attribute value is not an integer, the device interprets this attribute to a VLAN name.

Restrictions and guidelines

If the RADIUS server uses a RADIUS attribute other than the Microsegment-Id attribute to assign microsegment IDs, you must first convert the attribute to the Microsegment-Id attribute. To enable RADIUS attribute translation feature, use the attribute translate command.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Interpret the Microsegment-Id attribute to an authorization VLAN.

attribute 182 vendor-id 25506 vlan

By default, the Microsegment-Id attribute is not interpreted as an authorization VLAN.

Specifying the format for attribute Acct-Session-Id

About this task

RADIUS servers of different types might have different requirements for the format of attribute Acct-Session-Id. The following types are available:

·     Common format—In this format, the Acct-Session-Id attribute is a string with a minimum length of 38 characters. This string contains the prefix (indicating the access type), date and time, sequence number, LIP address of the access node, device ID, and job ID of the access process.

·     Simplified format—In this format, the Acct-Session-Id attribute is a string of 16 characters. This string contains the prefix (indicating the access type), month, sequence number, device ID, and LIP address of the access node.

Specify a format for attribute Acct-Session-Id to meet the requirements of the RADIUS servers.

Procedure

1.     Enter system view.

system-view

2.     Specify the format for attribute Acct-Session-Id.

aaa session-id mode { common | simplified }

By default, the device uses the common format for attribute Acct-Session-Id.

Including the proprietary H3c-DHCP-Option attribute in outgoing RADIUS packets

About including the proprietary H3c-DHCP-Option attribute in outgoing RADIUS packets

The RADIUS Vendor-Specific attribute (attribute 26) allows vendors to define extended attributes to implement functions that the standard RADIUS protocol does not provide. H3C defines the proprietary H3c-DHCP-Option attribute to carry user DHCP option information.

To send user DHCP option information to RADIUS servers, perform this task to include the proprietary H3c-DHCP-Option attribute in outgoing RADIUS authentication requests, start-accounting requests, and update-accounting requests.

Restrictions and guidelines

Determine whether to include the proprietary attribute in outgoing RADIUS packets and which attribute encapsulation format to use based on the requirements of RADIUS servers.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Include the proprietary H3c-DHCP-Option attribute in outgoing RADIUS packets.

include-attribute h3c-dhcp-option format { format1 | format2 }

By default, outgoing RADIUS packets do not include the proprietary H3c-DHCP-Option attribute.

 

Parameter

Description

format1

Specifies encapsulation format 1, in which the length of the Type field in the H3c-DHCP-Option attribute is 1 byte. Use this format when the device cooperates with RADIUS servers of most vendors.

format2

Specifies encapsulation format 2, in which the length of the Type field in the H3c-DHCP-Option attribute is 2 bytes. Use this format when the device cooperates with RADIUS servers of special vendors (HUAWEI, for example).

Configuring the RADIUS attribute translation feature

About this task

The RADIUS attribute translation feature enables the device to work correctly with the RADIUS servers of different vendors that support RADIUS attributes incompatible with the device.

RADIUS attribute translation has the following implementations:

·     Attribute conversion—Converts source RADIUS attributes into destination RADIUS attributes based on RADIUS attribute conversion rules.

·     Attribute rejection—Rejects RADIUS attributes based on RADIUS attribute rejection rules.

When the RADIUS attribute translation feature is enabled, the device processes RADIUS packets as follows:

·     For the sent RADIUS packets:

¡     Deletes the rejected attributes from the packets.

¡     Uses the destination RADIUS attributes to replace the attributes that match RADIUS attribute conversion rules in the packets.

·     For the received RADIUS packets:

¡     Ignores the rejected attributes in the packets.

¡     Interprets the attributes that match RADIUS attribute conversion rules as the destination RADIUS attributes.

To identify proprietary RADIUS attributes, you can define the attributes as extended RADIUS attributes, and then convert the extended RADIUS attributes to device-supported attributes.

Restrictions and guidelines for RADIUS attribute translation configuration

Configure either conversion rules or rejection rules for a RADIUS attribute.

Configure either direction-based rules or packet type-based rules for a RADIUS attribute.

For direction-based translation of a RADIUS attribute, you can configure a rule for each direction (inbound or outbound). For packet type-based translation of a RADIUS attribute, you can configure a rule for each RADIUS packet type (RADIUS Access-Accept, RADIUS Access-Request, or RADIUS accounting).

Configuring the RADIUS attribute translation feature for a RADIUS scheme

1.     Enter system view.

system-view

2.     (Optional.) Define an extended RADIUS attribute.

radius attribute extended attribute-name [ vendor vendor-id ] code attribute-code type { binary | date | integer | interface-id | ip | ipv6 | ipv6-prefix | octets | string }

3.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

4.     Enable the RADIUS attribute translation feature.

attribute translate

By default, this feature is disabled.

5.     Configure a RADIUS attribute conversion rule or a RADIUS attribute reject rule. Choose the following tasks as needed:

¡     Configure a RADIUS attribute conversion rule.

attribute convert src-attr-name to dest-attr-name { { access-accept | access-request | accounting } * | { received | sent } * }

By default, no RADIUS attribute conversion rules are configured.

¡     Configure a RADIUS attribute rejection rule.

attribute reject attr-name { { access-accept | access-request | accounting } * | { received | sent } * }

By default, no RADIUS attribute rejection rules are configured.

Configuring the RADIUS attribute translation feature for a RADIUS DAS

1.     Enter system view.

system-view

2.     (Optional.) Define an extended RADIUS attribute.

radius attribute extended attribute-name [ vendor vendor-id ] code attribute-code type { binary | date | integer | interface-id | ip | ipv6 | ipv6-prefix | octets | string }

3.     Enter RADIUS DAS view.

radius dynamic-author server

4.     Enable the RADIUS attribute translation feature.

attribute translate

By default, this feature is disabled.

5.     Configure a RADIUS attribute conversion rule or a RADIUS attribute rejection rule. Choose the following tasks as needed:

¡     Configure a RADIUS attribute conversion rule.

attribute convert src-attr-name to dest-attr-name { { coa-ack | coa-request } * | { received | sent } * }

By default, no RADIUS attribute conversion rules are configured.

¡     Configure a RADIUS attribute rejection rule.

attribute reject attr-name { { coa-ack | coa-request } * | { received | sent } * }

By default, no RADIUS attribute rejection rules are configured.

Configuring the RADIUS accounting-on feature

About this task

When the accounting-on feature is enabled, the device automatically sends an accounting-on packet to the RADIUS server after the entire device reboots. Upon receiving the accounting-on packet, the RADIUS server logs out all online users so they can log in again through the device. Without this feature, users cannot log in again after the reboot, because the RADIUS server considers them to come online.

You can configure the interval for which the device waits to resend the accounting-on packet and the maximum number of retries.

Procedure

1.     Enter system view.

system-view

2.     Enter RADIUS scheme view.

radius scheme radius-scheme-name

3.     Enable accounting-on.

accounting-on enable [ interval interval | send send-times ] *

By default, the accounting-on feature is disabled.

Configuring the RADIUS session-control feature

About this task

Enable this feature for the RADIUS server to dynamically change the user authorization information or forcibly disconnect users by using session-control packets. This task enables the device to receive RADIUS session-control packets on UDP port 1812.

To verify the session-control packets sent from a RADIUS server, specify the RADIUS server as a session-control client to the device.

Restrictions and guidelines

The RADIUS session-control feature can only work with RADIUS servers running on IMC. The session-control client configuration takes effect only when the session-control feature is enabled.

Procedure

1.     Enter system view.

system-view

2.     Enable the session-control feature.

radius session-control enable

By default, the session-control feature is disabled.

3.     Specify a session-control client.

radius session-control client { ip ipv4-address | ipv6 ipv6-address } [ key { cipher | simple } string ]

By default, no session-control clients are specified.

Configuring the RADIUS DAS feature

About this task

Dynamic Authorization Extensions (DAE) to RADIUS, defined in RFC 5176, can log off online users and change online user authorization information.

In a RADIUS network, the RADIUS server typically acts as the DAE client (DAC) and the NAS acts as the DAE server (DAS).

DAE defines the following types of packets:

·     Disconnect Messages (DMs)—The DAC sends DM requests to the DAS to log off specific online users.

·     Change of Authorization Messages (CoA Messages)—The DAC sends CoA requests to the DAS to change the authorization information of specific online users.

When the RADIUS DAS feature is enabled, the NAS performs the following operations:

1.     Listens to the default or specified UDP port to receive DAE requests.

2.     Logs off online users that match the criteria in the requests and changes their authorization information.

3.     Sends DAE responses to the DAC.

Procedure

1.     Enter system view.

system-view

2.     Enable the RADIUS DAS feature and enter RADIUS DAS view.

radius dynamic-author server

By default, the RADIUS DAS feature is disabled.

3.     Specify a RADIUS DAC.

client { ip ipv4-address | ipv6 ipv6-address } [ key { cipher | simple } string | vendor-id 2011 version { 1.0 | 1.1 } ] *

By default, no RADIUS DACs are specified.

4.     (Optional.) Specify the RADIUS DAS port.

port port-number

By default, the RADIUS DAS port is 3799.

Enabling SNMP notifications for RADIUS

About this task

When SNMP notifications are enabled for RADIUS, the SNMP agent supports the following notifications generated by RADIUS:

·     RADIUS server unreachable notification—The RADIUS server cannot be reached. RADIUS generates this notification if it does not receive a response to an accounting or authentication request within the specified number of RADIUS request transmission attempts.

·     RADIUS server reachable notification—The RADIUS server can be reached. RADIUS generates this notification for a previously blocked RADIUS server after the quiet timer expires.

·     Excessive authentication failures notification—The number of authentication failures compared to the total number of authentication attempts exceeds the specified threshold.

For RADIUS SNMP notifications to be sent correctly, you must also configure SNMP on the device. For more information about SNMP configuration, see Network Management and Monitoring Configuration Guide.

Procedure

1.     Enter system view.

system-view

2.     Enable SNMP notifications for RADIUS.

snmp-agent trap enable radius [ accounting-server-down | accounting-server-up | authentication-error-threshold | authentication-server-down | authentication-server-up ] *

By default, all SNMP notifications are disabled for RADIUS.

Display and maintenance commands for RADIUS

Execute display commands in any view and reset commands in user view.

 

Task

Command

Display the RADIUS scheme configuration.

display radius scheme [ radius-scheme-name ]

Display RADIUS packet statistics.

display radius statistics

Clear RADIUS statistics.

reset radius statistics

 

Configuring LDAP

LDAP tasks at a glance

To configure LDAP, perform the following tasks:

1.     Configuring an LDAP server

a.     Creating an LDAP server

b.     Configuring the IP address of the LDAP server

c.     (Optional.) Specifying the LDAP version

d.     (Optional.) Setting the LDAP server timeout period

e.     Configuring administrator attributes

f.     Configuring LDAP user attributes

g.     (Optional.) Configuring a user group filter

2.     Configuring an LDAP attribute map

3.     Creating an LDAP scheme

4.     Specifying the LDAP authentication server

5.     (Optional.) Specifying the LDAP authorization server

6.     (Optional.) Specifying an LDAP attribute map for LDAP authorization

Creating an LDAP server

1.     Enter system view.

system-view

2.     Create an LDAP server and enter LDAP server view.

ldap server server-name

Configuring the IP address of the LDAP server

Restrictions and guidelines

You can configure an IPv4 address or an IPv6 address for an LDAP server. If you configure the IP address for an LDAP server multiple times, the most recent configuration takes effect.

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP server view.

ldap server server-name

3.     Configure the IP address of the LDAP server.

{ ip ipv4-address | ipv6 ipv6-address } [ port port-number ]

By default, an LDAP server does not have an IP address.

Specifying the LDAP version

Restrictions and guidelines

The device supports LDAPv2 and LDAPv3.

A Microsoft LDAP server supports only LDAPv3.

The LDAP version specified on the device must be consistent with the version specified on the LDAP server.

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP server view.

ldap server server-name

3.     Specify the LDAP version.

protocol-version { v2 | v3 }

By default, LDAPv3 is used.

Setting the LDAP server timeout period

About this task

If the device sends a bind or search request to an LDAP server without receiving the server's response within the server timeout period, the authentication or authorization request times out. Then, the device tries the backup authentication or authorization method. If no backup method is configured in the ISP domain, the device considers the authentication or authorization attempt a failure.

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP server view.

ldap server server-name

3.     Set the LDAP server timeout period.

server-timeout time-interval

By default, the LDAP server timeout period is 10 seconds.

Configuring administrator attributes

About this task

To configure the administrator DN and password for binding with the LDAP server during LDAP authentication:

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP server view.

ldap server server-name

3.     Specify the administrator DN.

login-dn dn-string

By default, no administrator DN is specified.

The administrator DN specified on the device must be the same as the administrator DN configured on the LDAP server.

4.     Configure the administrator password.

login-password { cipher | simple } string

By default, no administrator password is specified.

Configuring LDAP user attributes

About this task

To authenticate a user, an LDAP client must complete the following operations:

1.     Establish a connection to the LDAP server.

2.     Obtain the user DN from the LDAP server.

3.     Use the user DN and the user's password to bind with the LDAP server.

LDAP provides a DN search mechanism for obtaining the user DN. According to the mechanism, an LDAP client sends search requests to the server based on the search policy determined by the LDAP user attributes of the LDAP client.

The LDAP user attributes include:

·     Search base DN.

·     Search scope.

·     Username attribute.

·     Username format.

·     User object class.

Restrictions and guidelines

If the LDAP server contains many directory levels, a user DN search starting from the root directory can take a long time. To improve efficiency, you can change the start point by specifying the search base DN.

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP server view.

ldap server server-name

3.     Specify the user search base DN.

search-base-dn base-dn

By default, no user search base DN is specified.

4.     (Optional.) Specify the user search scope.

search-scope { all-level | single-level }

By default, the user search scope is all-level.

5.     (Optional.) Specify the username attribute.

user-parameters user-name-attribute { name-attribute | cn | uid }

By default, the username attribute is cn.

6.     (Optional.) Specify the username format.

user-parameters user-name-format { with-domain | without-domain }

By default, the username format is without-domain.

7.     (Optional.) Specify the user object class.

user-parameters user-object-class object-class-name

By default, no user object class is specified, and the default user object class on the LDAP server is used. The default user object class for this command varies by server model.

Configuring a user group filter

About this task

When the device requests to import user group information from an LDAP server, the LDAP server sends only user groups that match the user group filter to the device.

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP server view.

ldap server server-name

3.     Configure the user group filter.

group-filter group-filter

By default, the user group filter is (objectclass=group).

Configuring an LDAP attribute map

About this task

Configure an LDAP attribute map to define a list of LDAP-AAA attribute mapping entries. To apply the LDAP attribute map, specify the name of the LDAP attribute map in the LDAP scheme used for authorization.

The LDAP attribute map feature enables the device to convert LDAP attributes obtained from an LDAP authorization server to device-recognizable AAA attributes based on the mapping entries. Because the device ignores unrecognized LDAP attributes, configure the mapping entries to include important LDAP attributes that should not be ignored.

An LDAP attribute can be mapped only to one AAA attribute. Different LDAP attributes can be mapped to the same AAA attribute.

Procedure

1.     Enter system view.

system-view

2.     Create an LDAP attribute map and enter LDAP attribute map view.

ldap attribute-map map-name

3.     Configure a mapping entry.

map ldap-attribute ldap-attribute-name [ prefix prefix-value delimiter delimiter-value ] aaa-attribute { user-group | user-profile }

Creating an LDAP scheme

Restrictions and guidelines

You can configure a maximum of 16 LDAP schemes. An LDAP scheme can be used by multiple ISP domains.

Procedure

1.     Enter system view.

system-view

2.     Create an LDAP scheme and enter LDAP scheme view.

ldap scheme ldap-scheme-name

Specifying the LDAP authentication server

1.     Enter system view.

system-view

2.     Enter LDAP scheme view.

ldap scheme ldap-scheme-name

3.     Specify the LDAP authentication server.

authentication-server server-name

By default, no LDAP authentication server is specified.

Specifying the LDAP authorization server

1.     Enter system view.

system-view

2.     Enter LDAP scheme view.

ldap scheme ldap-scheme-name

3.     Specify the LDAP authorization server.

authorization-server server-name

By default, no LDAP authorization server is specified.

Specifying an LDAP attribute map for LDAP authorization

About this task

Specify an LDAP attribute map for LDAP authorization to convert LDAP attributes obtained from the LDAP authorization server to device-recognizable AAA attributes.

Restrictions and guidelines

You can specify only one LDAP attribute map in an LDAP scheme.

Procedure

1.     Enter system view.

system-view

2.     Enter LDAP scheme view.

ldap scheme ldap-scheme-name

3.     Specify an LDAP attribute map.

attribute-map map-name

By default, no LDAP attribute map is specified.

Display and maintenance commands for LDAP

Execute display commands in any view.

 

Task

Command

Display the configuration of LDAP schemes.

display ldap scheme [ ldap-scheme-name ]

 

Creating an ISP domain

About ISP domains

In a networking scenario with multiple ISPs, the device can connect to users of different ISPs. These users can have different user attributes, such as different username and password structures, different service types, and different rights. To manage users of different ISPs, configure authentication, authorization, and accounting methods and domain attributes for each ISP domain as needed.

The device supports a maximum of 1024 ISP domains, including the system-defined ISP domain system. You can specify one of the ISP domains as the default domain.

On the device, each user belongs to an ISP domain. If a user does not provide an ISP domain name at login, the device considers the user belongs to the default ISP domain.

Each ISP domain has a set of system-defined AAA methods, which are local authentication, local authorization, and local accounting. If you do not configure any AAA methods for an ISP domain, the device uses the system-defined AAA methods for users in the domain.

The device chooses an authentication domain for each user in the following order:

4.     The authentication domain specified for the access module.

5.     The ISP domain in the username.

6.     The default ISP domain of the device.

If the chosen domain does not exist on the device, the device searches for the ISP domain that accommodates users assigned to nonexistent domains. (Support for the authentication domain configuration depends on the access module.) If no such ISP domain is configured, user authentication fails.

Restrictions and guidelines for ISP domain configuration

An ISP domain cannot be deleted when it is the default ISP domain. Before you use the undo domain command, change the domain to a non-default ISP domain by using the undo domain default enable command.

You can modify the settings of the system-defined ISP domain system, but you cannot delete the domain.

To avoid RADIUS authentication, authorization, or accounting failures, use short domain names to ensure that usernames containing a domain name do not exceed 253 characters.

Creating an ISP domain

1.     Enter system view.

system-view

2.     Create an ISP domain and enter ISP domain view.

domain isp-name

By default, a system-defined ISP domain exists. The domain name is system.

Specifying the default ISP domain

1.     Enter system view.

system-view

2.     Specify the default ISP domain.

domain default enable isp-name

By default, the default ISP domain is the system-defined ISP domain system.

Specifying an ISP domain for users that are assigned to nonexistent domains

3.     Enter system view.

system-view

4.     Specify the ISP domain to accommodate users that are assigned to nonexistent domains.

domain if-unknown isp-name

By default, no ISP domain is specified to accommodate users that are assigned to nonexistent domains.

Configuring ISP domain attributes

Setting ISP domain status

About this task

By placing the ISP domain in active or blocked state, you allow or deny network service requests from users in the domain.

Procedure

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     Set the status of the ISP domain.

state { active | block }

By default, an ISP domain is in active state, and users in the domain can request network services.

Configuring authorization attributes for an ISP domain

About this task

The device supports the following authorization attributes:

·     ACL—The device restricts authenticated users to access only the network resources permitted by the ACL.

·     CAR action—The attribute controls the traffic flow of authenticated users.

·     Idle cut—The device logs out a user if the user's total traffic in the idle timeout period at the specified direction is less than the specified minimum traffic.

·     Maximum number of multicast groups—The attribute restricts the maximum number of multicast groups that an authenticated user can join concurrently.

·     IPv4 address pool—The device assigns IPv4 addresses from the pool to authenticated users in the domain.

·     IPv6 address pool—The device assigns IPv6 addresses from the pool to authenticated users in the domain.

·     IPv6 address prefix—The device authorizes the IPv6 address prefix to authenticated users in the domain.

·     DNS server address—The attribute specifies the DNS server that offers DNS services to authenticated users in the domain.

·     Session timeout time—The device logs off a user when the user's session timeout timer expires.

·     Redirect URL—The device redirects users in the domain to the URL after they pass authentication.

·     User group—Authenticated users in the domain obtain all attributes of the user group.

·     User profile—The device restricts the user's behavior based on the user profile.

The device assigns the authorization attributes (excluding the idle cut attribute) in the ISP domain to the authenticated users that do not receive these attributes from the server.

If the idle cut attribute is configured in an ISP domain, the device assigns the attribute to the authenticated users in the domain. If no idle cut attribute is configured in the ISP domain, the device uses the idle cut attribute assigned by the server.

Procedure

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     Configure authorization attributes for authenticated users in the ISP domain.

authorization-attribute { acl acl-number | car inbound cir committed-information-rate [ pir peak-information-rate ] outbound cir committed-information-rate [ pir peak-information-rate ] | idle-cut minutes [ flow ] | ip-pool ipv4-pool-name | ipv6-pool ipv6-pool-name | ipv6-prefix ipv6-prefix prefix-length | { primary-dns | secondary-dns } { ip ipv4-address | ipv6 ipv6-address } | session-timeout minutes | url url-string | user-group user-group-name | user-profile profile-name }

The default settings are as follows:

¡     The idle cut feature is disabled.

¡     An IPv4 user can concurrently join a maximum of four IGMP multicast groups.

¡     An IPv6 user can concurrently join a maximum of four MLD multicast groups.

¡     No other authorization attributes exist.

Including the idle timeout period in the user online duration to be sent to the server

About this task

If a user goes offline due to connection failure or malfunction, the user's online duration sent to the server includes the idle timeout period assigned by the authorization server. The online duration generated on the server is longer than the actual online duration of the user.

For portal users, the device includes the idle timeout period set for the online portal user detection feature in the user online duration. For more information about online detection for portal users, see "Configuring portal authentication."

Procedure

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     Configure the device to include the idle timeout period in the user online duration to be sent to the server.

session-time include-idle-time

By default, the user online duration sent to the server does not include the idle timeout period.

Specifying the user address type in an ISP domain

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     Specify the user address type in the ISP domain.

user-address-type { ds-lite | ipv6 | nat64 | private-ds | private-ipv4 | public-ds | public-ipv4 }

By default, no user address type is specified.

Specifying the service type for users in an ISP domain

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     Specify the service type for users in the ISP domain.

service-type { hsi | stb | voip }

By default, the service type is hsi.

Configuring AAA methods for an ISP domain

Configuring authentication methods for an ISP domain

Restrictions and guidelines

When you configure remote authentication, follow these restrictions and guidelines:

·     If the authentication method uses a RADIUS scheme and the authorization method does not use a RADIUS scheme, AAA accepts only the authentication result from the RADIUS server. The Access-Accept message from the RADIUS server also includes the authorization information, but the device ignores the information.

Prerequisites

Before configuring authentication methods, complete the following tasks:

1.     Determine the access type or service type to be configured. With AAA, you can configure an authentication method for each access type and service type.

2.     Determine whether to configure the default authentication method for all access types or service types. The default authentication method applies to all access users. However, the method has a lower priority than the authentication method that is specified for an access type or service type.

Procedure

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     (Optional.) Specify default authentication methods for all types of users.

authentication default { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authentication method is local.

4.     Specify authentication methods for a user type or a service.

¡     Specify extended authentication methods for IKE users.

authentication ike { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authentication methods are used for IKE extended authentication.

¡     Specify authentication methods for LAN users.

authentication lan-access { ldap-scheme ldap-scheme-name [ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authentication methods are used for LAN users.

¡     Specify authentication methods for login users.

authentication login { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authentication methods are used for login users.

¡     Specify authentication methods for portal users.

authentication portal { ldap-scheme ldap-scheme-name [ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authentication methods are used for portal users.

Configuring authorization methods for an ISP domain

Restrictions and guidelines

The device does not support LDAP authorization in the current software version.

To use a RADIUS scheme as the authorization method, specify the name of the RADIUS scheme that is configured as the authentication method for the ISP domain. If an invalid RADIUS scheme is specified as the authorization method, RADIUS authentication and authorization fail.

Prerequisites

Before configuring authorization methods, complete the following tasks:

1.     Determine the access type or service type to be configured. With AAA, you can configure an authorization scheme for each access type and service type.

2.     Determine whether to configure the default authorization method for all access types or service types. The default authorization method applies to all access users. However, the method has a lower priority than the authorization method that is specified for an access type or service type.

Procedure

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     (Optional.) Specify default authorization methods for all types of users.

authorization default { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the authorization method is local.

4.     Specify authorization methods for a user type or a service.

¡     Specify authorization methods for IKE extended authentication.

authorization ike { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authorization methods are used for IKE extended authentication.

¡     Specify authorization methods for LAN users.

authorization lan-access { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authorization methods are used for LAN users.

¡     Specify authorization methods for login users.

authorization login { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authorization methods are used for login users.

¡     Specify authorization methods for portal users.

authorization portal { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default authorization methods are used for portal users.

Configuring accounting methods for an ISP domain

Restrictions and guidelines

FTP, SFTP, and SCP users do not support accounting.

Local accounting does not provide statistics for charging. It only counts and controls the number of concurrent users that use the same local user account. The threshold is configured by using the access-limit command.

Prerequisites

Before configuring accounting methods, complete the following tasks:

1.     Determine the access type or service type to be configured. With AAA, you can configure an accounting method for each access type and service type.

2.     Determine whether to configure the default accounting method for all access types or service types. The default accounting method applies to all access users. However, the method has a lower priority than the accounting method that is specified for an access type or service type.

Procedure

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     (Optional.) Specify default accounting methods for all types of users.

accounting default { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the accounting method is local.

4.     Specify accounting methods for a user type.

¡     Specify accounting methods for LAN users.

accounting lan-access { broadcast radius-scheme radius-scheme-name1 radius-scheme radius-scheme-name2 [ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default accounting methods are used for LAN users.

¡     Specify accounting methods for login users.

accounting login { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default accounting methods are used for login users.

¡     Specify accounting methods for portal users.

accounting portal { broadcast radius-scheme radius-scheme-name1 radius-scheme radius-scheme-name2 [ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }

By default, the default accounting methods are used for portal users.

5.     (Optional.) Configure extended accounting policies.

¡     Configure access control for users that encounter accounting-start failures.

accounting start-fail { offline | online }

By default, the device allows users that encounter accounting-start failures to stay online.

¡     Configure access control for users that have failed all their accounting-update attempts.

accounting update-fail { [ max-times max-times ] offline | online }

By default, the device allows users that have failed all their accounting-update attempts to stay online.

¡     Configure access control for users that have used up their data or time accounting quotas.

accounting quota-out { offline | online }

By default, the device logs off users that have used up their accounting quotas.

Display and maintenance commands for ISP domains

Execute display commands in any view.

 

Task

Command

Display configuration information about an ISP domain or all ISP domains.

display domain [ isp-name ]

 

Setting the maximum number of concurrent login users

About this task

Perform this task to set the maximum number of concurrent users that can log on to the device through a specific protocol, regardless of their authentication methods. The authentication methods include no authentication, local authentication, and remote authentication.

Procedure

1.     Enter system view.

system-view

2.     Set the maximum number of concurrent login users.

aaa session-limit { ftp | http | https | ssh | telnet } max-sessions

By default, the maximum number of concurrent login users is 32 for each user type.

Configuring local BYOD authorization

Configuring BYOD endpoint identification rules

About this task

Use this feature to control authentication and authorization of Bring Your Own Device (BYOD) users based on account information, endpoint information, and access scenarios. After users pass local authentication, they obtain BYOD authorization attributes from the user group they are assigned to. A user group can contain different authorization attributes specific to the endpoint types of the users.

A BYOD endpoint identification rule defines the mapping between an endpoint type and a fingerprint string. The device obtains fingerprint information from the authentication request of an endpoint, and matches the fingerprint with the rules for the associated endpoint type.

BYOD authorization supports the following endpoint fingerprints:

·     DHCP Option 55 fingerprint—Parameter request list option. The option is used by an endpoint to request specified configuration parameters.

·     HTTP user agent fingerprint—Located in the header of HTTP requests to carry information about the endpoint operating system, Web browser, and versions.

·     MAC address fingerprint—OUI of the endpoint or MAC address range to which the endpoint belongs.

The system has predefined BYOD endpoint identification rules. You can also configure BYOD endpoint identification rules depending on the network requirements.

You can specify the fingerprint types supported by the device and their match priority order.

Restrictions and guidelines

A fingerprint string can match only one endpoint type. However, an endpoint type can be associated with multiple fingerprint strings.

Procedure

1.     Enter system view.

system-view

2.     Configure a BYOD endpoint identification rule.

byod rule { dhcp-option option-string | http-user-agent agent-string | mac-address mac-address mask mac-mask } device-type type-name

By default, only predefined BYOD endpoint identification rules exist.

3.     Specify the supported BYOD endpoint identification rule types and their priority order.

byod rule-order { dhcp-option | http-user-agent | mac-address } *

By default, the device uses the following types of BYOD endpoint identification rules to match an endpoint type and the priority order is as follows:

a.     DHCP Option 55-based rules.

b.     HTTP user agent-based rules.

c.     MAC address-based rule.

Configuring BYOD endpoint type-specific authorization attributes

Restrictions and guidelines

BYOD authorization attributes in a user group are configured based on endpoint types to control users that have passed local authentication. After the device identifies the endpoint type of a user, it assigns BYOD authorization attributes matching the endpoint type in the user group of the user.

The device supports endpoint type-specific BYOD authorization only for network access users. For a user, an endpoint type-specific authorization attribute takes precedence over the same common authorization attribute specified for the user. A common authorization attribute specified for the user takes precedence over the same common authorization attribute specified for the user group to which the user belongs.

Procedure

1.     Enter system view.

system-view

2.     Create a user group and enter user group view.

user-group group-name

By default, a user group named system exists on the device.

3.     Configure authorization attributes for a type of BYOD endpoints in the user group.

byod authorization device-type type-name { acl acl-number | callback-number callback-number | idle-cut minutes | ip-pool ipv4-pool-name | ipv6-pool ipv6-pool-name | ipv6-prefix ipv6-prefix prefix-length | { primary-dns | secondary-dns } { ip ipv4-address | ipv6 ipv6-address } | session-timeout minutes | url url-string | user-profile profile-name | vlan vlan-id } *

By default, no authorization attributes are configured for any type of BYOD endpoints.

Display and maintenance commands for local BYOD authorization

Execute display commands in any view.

 

Task

Command

Display BYOD endpoint identification rules.

display byod rule { dhcp-option [ option-string ] | http-user-agent [ agent-string ] | mac-address [ mac-address ] }

Display the supported types of BYOD endpoint identification rules and their priority order.

display byod rule-order

Display BYOD authorization information for a user group.

display user-group name group-name byod-authorization

 

Configuring a NAS-ID

About this task

During RADIUS authentication, the device uses a NAS-ID to set the NAS-Identifier attribute of RADIUS packets so that the RADIUS server can identify the access location of users.

The device selects the NAS-ID for the NAS-Identifier attribute in the following order:

4.     NAS-ID bound with VLANs in a NAS-ID profile.

5.     NAS-ID in an ISP domain.

If no NAS-ID is configured, the device uses the device name (set by using the sysname command) as the NAS-ID.

Configuring a NAS-ID profile

About this task

Configure a NAS-ID profile to maintain NAS-ID and VLAN bindings on the device so that the device can send different NAS-Identifier attribute strings in RADIUS requests from different VLANs.

Restrictions and guidelines

You can apply a NAS-ID profile to portal- or port security-enabled interfaces. For more information, see "Configuring portal authentication" and "Configuring port security."

You can configure multiple NAS-ID and VLAN bindings in a NAS-ID profile.

A NAS-ID can be bound with more than one VLAN, but a VLAN can be bound with only one NAS-ID. If you configure multiple bindings for the same VLAN, the most recent configuration takes effect.

Procedure

1.     Enter system view.

system-view

2.     Create a NAS-ID profile and enter NAS-ID profile view.

aaa nas-id profile profile-name

3.     Configure a NAS-ID and VLAN binding in the profile.

nas-id nas-identifier bind vlan vlan-id

Setting the NAS-ID in an ISP domain

1.     Enter system view.

system-view

2.     Enter ISP domain view.

domain isp-name

3.     Set the NAS-ID in the ISP domain.

nas-id nas-identifier

By default, no NAS-ID is set in an ISP domain.

Configuring the device ID

About this task

RADIUS uses the value of the Acct-Session-ID attribute as the accounting ID for a user. The device generates an Acct-Session-ID value that includes the device ID for each online user.

Procedure

1.     Enter system view.

system-view

2.     Configure the device ID.

aaa device-id device-id

By default, the device ID is 0.

Enabling password change prompt logging

About this task

Use this feature to enhance the protection of passwords for Telnet, SSH, HTTP, HTTPS, NETCONF over SSH, and NETCONF over SOAP users and improve the system security.

This feature enables the device to generate logs to prompt users to change their weak passwords at an interval of 24 hours and at the users' login.

A password is a weak password if it does not meet the following requirements:

·     Password composition restriction configured by using the password-control composition command.

·     Minimum password length restriction set by using the password-control length command.

·     It cannot contain the username or the reverse letters of the username.

For a NETCONF over SSH or NETCONF over SOAP user, the device also generates a password change prompt log if any of the following conditions exists:

·     The current password of the user is the default password or has expired.

·     The user logs in to the device for the first time or uses a new password to log in after global password control is enabled.

The device will no longer generate password change prompt logs for a user when one of the following conditions exists:

·     The password change prompt logging feature is disabled.

·     The user has changed the password and the new password meets the password control requirements.

·     The enabling status of a related password control feature has changed so the current password of the user meets the password control requirements.

·     The password composition policy or the minimum password length has changed.

Restrictions and guidelines

You can use the display password-control command to display password control configuration. For more information about password control commands, see password control commands in Security Command Reference.

Procedure

1.     Enter system view.

system-view

2.     Enable password change prompt logging.

local-server log change-password-prompt

By default, password change prompt logging is enabled.

AAA configuration examples

Example: Configuring authentication and authorization for SSH users by a RADIUS server

Network configuration

As shown in Figure 9, configure the AP to meet the following requirements:

·     Use the RADIUS server for SSH user authentication and authorization. In this example, the RADIUS server runs IMC PLAT 7.3 (E0605) and IMC UAM 7.3 (E0512).

·     Assign the network-admin user role to SSH users after they pass authentication.

·     Include domain names from the usernames sent to the RADIUS server.

·     Use expert as the shared keys for secure RADIUS communication.

Figure 9 Network diagram

Configuring the RADIUS server

1.     Add the AP to IMC UAM as an access device:

Log in to IMC, click the User tab, and select User Access Policy > Access Device Management > Access Device from the navigation tree. Then, click Add to configure an access device as follows:

a.     Set the ports for authentication and accounting to 1812 and 1813, respectively.

b.     Select Device Management Service from the Service Type list.

c.     Select H3C (General) from the Access Device Type list.

d.     Set the shared key to expert for secure RADIUS communication.

e.     Select an access device from the device list or manually add an access device. In this example, the device IP address is 10.1.1.2.

f.     Use the default values for other parameters and click OK.

The IP address of the access device specified here must be the same as the source IP address of the RADIUS packets sent from the AP. The source IP address is chosen in the following order on the AP:

¡     IP address specified by using the nas-ip command.

¡     IP address specified by using the radius nas-ip command.

¡     IP address of the outbound interface (the default).

Figure 10 Adding the AP as an access device

 

2.     Add an account for device management:

Click the User tab, and select Device User > Device User from the navigation tree. Then, click Add to configure a device management account as follows:

a.     Enter account name hello@bbb and specify the password.

b.     Select SSH from the Login Type list.

c.     Enter user role network-admin.

d.     Specify 10.1.1.0 to 10.1.1.255 as the IP address range of the hosts to be managed.

e.     Click OK.

 

 

NOTE:

The IP address range must contain the IP address of the AP.

 

Figure 11 Adding an account for device management

 

Configuring the AP

# Assign an IP address to VLAN-interface 2.

<AP> system-view

[AP] interface vlan-interface 2

[AP-Vlan-interface2] ip address 192.168.1.70 255.255.255.0

[AP-Vlan-interface2] quit

# Assign an IP address to VLAN-interface 3.

[AP] interface vlan-interface 3

[AP-Vlan-interface3] ip address 10.1.1.2 255.255.255.0

[AP-Vlan-interface3] quit

# Create local RSA and DSA key pairs.

[AP] public-key local create rsa

[AP] public-key local create dsa

# Enable the Stelnet server.

[AP] ssh server enable

# Enable scheme authentication for user lines VTY 0 through VTY 63.

[AP] line vty 0 63

[AP-line-vty0-63] authentication-mode scheme

[AP-line-vty0-63] quit

# Create a RADIUS scheme named rad and enter RADIUS scheme view.

[AP] radius scheme rad

# Specify the primary authentication server.

[AP-radius-rad] primary authentication 10.1.1.1 1812

# Set the shared keys to expert in plaintext form for secure RADIUS communication.

[AP-radius-rad] key authentication simple expert

# Include domain names in the usernames sent to the RADIUS server.

[AP-radius-rad] user-name-format with-domain

[AP-radius-rad] quit

# Create an ISP domain named bbb and configure the domain to use the RADIUS scheme for authentication and authorization of login users.

[AP] domain bbb

[AP-isp-bbb] authentication login radius-scheme rad

[AP-isp-bbb] authorization login radius-scheme rad

[AP-isp-bbb] accounting login none

[AP-isp-bbb] quit

# Specify ISP domain bbb as the default domain.

[AP] domain default enable bbb

Verifying the configuration

# Initiate an SSH connection to the AP, and enter username hello@bbb and the correct password. The user logs in to the AP. (Details not shown.)

# Verify that the user can use the commands permitted by the network-admin user role. (Details not shown.)

Example: Configuring authentication for SSH users by an LDAP server

Network configuration

As shown in Figure 12, the LDAP server uses domain ldap.com and runs Microsoft Windows 2003 Server Active Directory.

Configure the AP to meet the following requirements:

·     Use the LDAP server to authenticate SSH users.

·     Assign the level-0 user role to SSH users after they pass authentication.

On the LDAP server, set the administrator password to admin!123456, add user aaa, and set the user's password to ldap!123456.

Figure 12 Network diagram

Configuring the LDAP server

1.     Add a user named aaa and set the password to ldap!123456:

a.     On the LDAP server, select Start > Control Panel > Administrative Tools.

b.     Double-click Active Directory Users and Computers.

The Active Directory Users and Computers window is displayed.

c.     From the navigation tree, click Users under the ldap.com node.

d.     Select Action > New > User from the menu to display the dialog box for adding a user.

e.     Enter logon name aaa and click Next.

Figure 13 Adding user aaa

 

a.     In the dialog box, enter password ldap!123456, select options as needed, and click Next.

Figure 14 Setting the user's password

 

a.     Click OK.

2.     Add user aaa to group Users:

a.     From the navigation tree, click Users under the ldap.com node.

b.     In the right pane, right-click user aaa and select Properties.

c.     In the dialog box, click the Member Of tab and click Add.

Figure 15 Modifying user properties

 

a.     In the Select Groups dialog box, enter Users in the Enter the object names to select field, and click OK.

User aaa is added to group Users.

Figure 16 Adding user aaa to group Users

 

3.     Set the administrator password to admin!123456:

a.     In the right pane, right-click user Administrator and select Set Password.

b.     In the dialog box, enter the administrator password. (Details not shown.)

Configuring the AP

# Assign an IP address to VLAN-interface 2.

<AP> system-view

[AP] interface vlan-interface 2

[AP-Vlan-interface2] ip address 192.168.1.70 24

[AP-Vlan-interface2] quit

# Assign an IP address to VLAN-interface 3.

[AP] interface vlan-interface 3

[AP-Vlan-interface3] ip address 10.1.1.2 24

[AP-Vlan-interface3] quit

# Create local RSA and DSA key pairs.

[AP] public-key local create rsa

[AP] public-key local create dsa

# Enable the Stelnet server.

[AP] ssh server enable

# Enable scheme authentication for user lines VTY 0 through VTY 63.

[AP] line vty 0 63

[AP-line-vty0-63] authentication-mode scheme

[AP-line-vty0-63] quit

# Configure an LDAP server.

[AP] ldap server ldap1

# Specify the IP address of the LDAP authentication server.

[AP-ldap-server-ldap1] ip 10.1.1.1

# Specify the administrator DN.

[AP-ldap-server-ldap1] login-dn cn=administrator,cn=users,dc=ldap,dc=com

# Specify the administrator password.

[AP-ldap-server-ldap1] login-password simple admin!123456

# Configure the base DN for user search.

[AP-ldap-server-ldap1] search-base-dn dc=ldap,dc=com

[AP-ldap-server-ldap1] quit

# Create an LDAP scheme.

[AP] ldap scheme ldap-shm1

# Specify the LDAP authentication server.

[AP-ldap-ldap-shm1] authentication-server ldap1

[AP-ldap-ldap-shm1] quit

# Create an ISP domain named bbb and configure authentication, authorization, and accounting methods for login users.

[AP] domain bbb

[AP-isp-bbb] authentication login ldap-scheme ldap-shm1

[AP-isp-bbb] authorization login none

[AP-isp-bbb] accounting login none

[AP-isp-bbb] quit

# Specify ISP domain bbb as the default domain.

[AP] domain default enable bbb

Verifying the configuration

# Initiate an SSH connection to the AP, and enter username aaa@bbb and password ldap!123456. The user logs in to the AP. (Details not shown.)

# Verify that the user can use the commands permitted by the level-0 user role. (Details not shown.)

Example: Configuring AAA for 802.1X users by a RADIUS server

Network configuration

As shown in Figure 17, configure the AP to meet the following requirements:

·     Use the RADIUS server for authentication, authorization, and accounting of 802.1X users.

·     Include domain names in the usernames sent to the RADIUS server.

In this example, the RADIUS server runs IMC PLAT 7.1 (E0303), IMC UAM 7.1 (E0304), and IMC CAMS 7.1 (E0301). On the RADIUS server, perform the following tasks:

·     Add a service that charges 120 dollars for up to 120 hours per month and assigns authenticated users to VLAN 4.

·     Configure a user account named dot1x@bbb and assign the service to the user.

Set the shared keys to expert for secure RADIUS communication. Set the ports for authentication and accounting to 1812 and 1813, respectively.

Figure 17 Network diagram

Configuring the RADIUS server

1.     Add the AP to IMC UAM as an access device:

Log in to IMC, click the User tab, and select User Access Policy > Access Device Management > Access Device from the navigation tree. Then, click Add to configure an access device as follows:

a.     Set the ports for authentication and accounting to 1812 and 1813, respectively.

b.     Select LAN Access Service from the Service Type list.

c.     Select H3C(General) from the Access Device Type list.

d.     Set the shared key to expert for secure authentication and accounting communication.

e.     Select an access device from the device list or manually add an access device. In this example, the device IP address is 10.1.1.2.

f.     Use the default values for other parameters.

g.     Click OK.

The IP address of the access device specified here must be the same as the source IP address of the RADIUS packets sent from the AP. The source IP address is chosen in the following order on the AP:

¡     IP address specified by using the nas-ip command.

¡     IP address specified by using the radius nas-ip command.

¡     IP address of the outbound interface (the default).

Figure 18 Adding the AP as an access device

 

2.     Add a charging plan:

Click the User tab, and select Accounting Manager > Charging Plans from the navigation tree to enter the charging plan configuration page. Then, click Add to configure a charging plan as follows:

a.     Add a plan named UserAcct.

b.     Select Flat rate from the Charging Template list.

c.     Select time for Charge Based on, select Monthly for Billing Term, and enter 120 in the Fixed Fee field.

d.     Enter 120 in the Usage Threshold field and select hr (hours) for the in field. The configuration allows the user to access the Internet for up to 120 hours per month.

e.     Use the default values for other parameters.

f.     Click OK.

Figure 19 Adding a charging plan

 

3.     Add an access policy:

Click the User tab, and select User Access Policy > Access Policy from the navigation tree. Then, click Add to configure an access policy as follows:

a.     Enter access policy name Dot1x auth.

b.     Set the ID of the VLAN to be deployed to 4.

c.     Configure other parameters as needed.

d.     Click OK.

Figure 20 Adding an access policy

 

4.     Add an access service:

Click the User tab, and select User Access Policy > Access Service from the navigation tree. Then, click Add to configure a service as follows:

a.     Add a service named Dot1x Service, and set the service suffix to bbb, the authentication domain for the 802.1X user. With the service suffix configured, you must configure the access device to send usernames that include domain names to the RADIUS server.

b.     Select UserAcct from the Charging Plan list.

c.     Select Dot1x auth from the Default Access Policy list.

d.     Configure other parameters as needed.

e.     Click OK.

Figure 21 Adding an access service

 

5.     Add an access user:

Click the User tab, and select All Access Users from the navigation tree to enter the All Access Users page. Then, click Add to configure a user as follows:

a.     Select user test or manually add a user named hello.

b.     Specify the account name as dot1x and configure the password.

c.     Select Dot1x Service in the Access Service area.

d.     Configure other parameters as needed.

e.     Click OK.

Figure 22 Adding an access user account

 

Configuring the AP

1.     Configure a RADIUS scheme:

# Create a RADIUS scheme named rad and enter RADIUS scheme view.

<AP> system-view

[AP] radius scheme rad

# Specify the primary authentication server and primary accounting server, and configure the keys for communication with the servers.

[AP-radius-rad] primary authentication 10.1.1.1

[AP-radius-rad] primary accounting 10.1.1.1

[AP-radius-rad] key authentication simple expert

[AP-radius-rad] key accounting simple expert

# Include domain names in the usernames sent to the RADIUS server.

[AP-radius-rad] user-name-format with-domain

[AP-radius-rad] quit

2.     Configure an authentication domain:

# Create an ISP domain named bbb and enter ISP domain view.

[AP] domain bbb

# Configure the ISP domain to use RADIUS scheme rad for authentication, authorization, and accounting of LAN users.

[AP-isp-bbb] authentication lan-access radius-scheme rad

[AP-isp-bbb] authorization lan-access radius-scheme rad

[AP-isp-bbb] accounting lan-access radius-scheme rad

[AP-isp-bbb] quit

3.     Configure 802.1X authentication:

# Enable 802.1X EAP relay.

[AP] dot1x authentication-method eap

# Configure service template 1.

[AP] wlan service-template 1

# Set the SSID to sectest.

[AP-wlan-st-1] ssid sectest

# Bind VLAN 2 to the service template.

[AP-wlan-st-1] vlan 2

# Set the AKM mode to 802.1X.

[AP-wlan-st-1] akm mode dot1x

# Set the authentication mode to 802.1X.

[AP-wlan-st-1] client-security authentication-mode dot1x

# Specify the TKIP cipher suite, and enable the WPA IE in beacon and probe responses.

[AP-wlan-st-1] cipher-suite tkip

[AP-wlan-st-1] security-ie wpa

# Specify ISP domain bbb as the 802.1X authentication domain.

[AP-wlan-st-1] dot1x domain bbb

# Enable the service template.

[AP-wlan-st-1] service-template enable

[AP-wlan-st-1] quit

4.     Enter interface view of WLAN radio interface 1/0/1 and bind service template 1 to the interface.

[AP] interface wlan-radio 1/0/1

[AP-WLAN-Radio1/0/1] service-template 1

[AP-WLAN-Radio1/0/1] quit

Verifying the configuration

1.     On the host, use account dot1x@bbb to pass 802.1X authentication:

# If the host runs the Windows XP 802.1X client, configure the network connection properties as follows:

a.     Click the Authentication tab of the properties window.

b.     Select the Enable IEEE 802.1X authentication for this network option.

c.     Select MD5 challenge as the EAP authentication type.

d.     Click OK.

The user passes authentication after entering the correct username and password on the authentication page.

# If the host runs the iNode client, no advanced authentication options are required. The user can pass authentication after entering username dot1x@bbb and the correct password on the client property page.

 

IMPORTANT

IMPORTANT:

Make sure the client can update its IP address to access the resources in the authorized VLAN after passing authentication.

 

2.     On the AP, verify that the server assigns the port that is connected to the client to VLAN 4 after the user passes authentication. (Details not shown.)

3.     Display 802.1X connection information on the AP.

[AP] display dot1x connection

Example: Configuring and managing a local guest

Network configuration

As shown in Figure 23, create a local guest named user1 for Jack. Configure local guest attributes and manage the local guest on the AP as follows:

·     Configure attributes for the local guest, including the password, user group, validity period, and sponsor information.

·     Enable the guest auto-delete feature.

·     Specify an SMTP server and email sender address for the device to send local guest email notifications.

·     Configure email addresses for the local guest, guest sponsor, and guest manager.

·     Configure the subject and body of the email notifications to be sent to the guest, guest sponsor, and guest manager.

·     Send email notifications of the local guest account information to the guest and guest sponsor.

Figure 23 Network diagram

 

Procedure

1.     Manage local guests:

# Enable the guest auto-delete feature for expired local guests.

<AP> system-view

[AP] local-guest auto-delete enable

# Specify an SMTP server to send local guest email notifications.

[AP] local-guest email smtp-server smtp://192.168.0.112/smtp

# Specify the email sender address as bbb@ccc.com in the email notifications sent by the device for local guests.

[AP] local-guest email sender bbb@ccc.com

# Specify the email address of the guest manager as mailto:guest-manager@ccc.com.

[AP] local-guest manager-email mailto:guest-manager@ccc.com

# Configure the subject and body of the email notifications to be sent to the local guest.

[AP] local-guest email format to guest subject Guest account information

[AP] local-guest email format to guest body A guest account has been created for your use. The username, password, and valid dates for the account are given below.

# Configure the subject and body of the email notifications to be sent to the guest sponsor.

[AP] local-guest email format to sponsor subject Guest account information

[AP] local-guest email format to sponsor body A guest account has been created for your use. The username, password, and valid dates for the account are given below.

# Configure the subject and body of the email notifications to be sent to the guest manager.

[AP] local-guest email format to manager subject Guest register information

[AP] local-guest email format to manager body A guest account has been registered. The username for the account is given below. Please approve the register information.

2.     Configure the local guest:

# Create a user group named guest1.

[AP] user-group guest1

[AP-ugroup-guest1] quit

# Create a local guest named user1 and enter local guest view.

[AP] local-user user1 class network guest

# Set the guest password to 123456 in plaintext form.

[AP-luser-network(guest)-user1] password simple 123456

# Assign the guest to user group guest1.

[AP-luser-network(guest)-user1] group guest1

# Specify the name of the local guest.

[AP-luser-network(guest)-user1] fullname Jack

# Specify the company of the local guest.

[AP-luser-network(guest)-user1] company cc

# Configure the email address of the local guest.

[AP-luser-network(guest)-user1] email Jack@cc.com

# Configure the phone number of the local guest.

[AP-luser-network(guest)-user1] phone 131129237

# Configure a description for the local guest.

[AP-luser-network(guest)-user1] description A guest from company cc

# Configure the validity period of the local guest.

[AP-luser-network(guest)-user1] validity-datetime from 2015/4/1 08:00:00 to 2015/4/3 18:00:00

# Specify the guest sponsor name as Sam.

[AP-luser-network(guest)-user1] sponsor-full-name Sam

# Configure the email address of the guest sponsor.

[AP-luser-network(guest)-user1] sponsor-email Sam@aa.com

# Configure the department of the guest sponsor as security.

[AP-luser-network(guest)-user1] sponsor-department security

[AP-luser-network(guest)-user1] quit

[AP] quit

3.     Configure the device to send guest email notifications:

# Send an email notification to the guest sponsor.

<AP> local-guest send-email user-name user1 to sponsor

# Send an email notification to the guest.

<AP> local-guest send-email user-name user1 to guest

Verifying the configuration

# Display local guest information.

<AP> display local-user user-name user1 class network guest

Total 1 local users matched.

 

Network access guest user user1:

  State:                     Active

  Service type:              LAN access/Portal

  User group:                guest1

  Full name:                 Jack

  Company:                   cc

  Email:                     Jack@cc.com

  Phone:                     131129237

  Description:               A guest from company cc

  Sponsor full name:         Sam

  Sponsor department:        security

  Sponsor email:             Sam@aa.com

  Period of validity:

    Start date and time:     2015/04/01-08:00:00

    Expiration date and time:2015/04/03-18:00:00

# Verify that Jack can use username user1 and password 123456 to pass local authentication and come online during the validity period. (Details not shown.)

Troubleshooting AAA

RADIUS authentication failure

Symptom

User authentication always fails.

Analysis

Possible reasons include:

·     A communication failure exists between the NAS and the RADIUS server.

·     The username is not in the userid@isp-name format, or the ISP domain is not correctly configured on the NAS.

·     The user is not configured on the RADIUS server.

·     The password entered by the user is incorrect.

·     The RADIUS server and the NAS are configured with different shared keys.

Solution

To resolve the problem:

1.     Verify the following items:

¡     The NAS and the RADIUS server can ping each other.

¡     The username is in the userid@isp-name format and the ISP domain is correctly configured on the NAS.

¡     The user is configured on the RADIUS server.

¡     The correct password is entered.

¡     The same shared key is configured on both the RADIUS server and the NAS.

2.     If the problem persists, contact H3C Support.

RADIUS packet delivery failure

Symptom

RADIUS packets cannot reach the RADIUS server.

Analysis

Possible reasons include:

·     A communication failure exists between the NAS and the RADIUS server.

·     The NAS is not configured with the IP address of the RADIUS server.

·     The authentication and accounting UDP ports configured on the NAS are incorrect.

·     The RADIUS server's authentication and accounting port numbers are being used by other applications.

Solution

To resolve the problem:

1.     Verify the following items:

¡     The link between the NAS and the RADIUS server works well at both the physical and data link layers.

¡     The IP address of the RADIUS server is correctly configured on the NAS.

¡     The authentication and accounting UDP port numbers configured on the NAS are the same as those of the RADIUS server.

¡     The RADIUS server's authentication and accounting port numbers are available.

2.     If the problem persists, contact H3C Support.

RADIUS accounting error

Symptom

A user is authenticated and authorized, but accounting for the user is not normal.

Analysis

The accounting server configuration on the NAS is not correct. Possible reasons include:

·     The accounting port number configured on the NAS is incorrect.

·     The accounting server IP address configured on the NAS is incorrect. For example, the NAS is configured to use a single server to provide authentication, authorization, and accounting services, but in fact the services are provided by different servers.

Solution

To resolve the problem:

1.     Verify the following items:

¡     The accounting port number is correctly configured.

¡     The accounting server IP address is correctly configured on the NAS.

2.     If the problem persists, contact H3C Support.

LDAP authentication failure

Symptom

User authentication fails.

Analysis

Possible reasons include:

·     A communication failure exists between the NAS and the LDAP server.

·     The LDAP server IP address or port number configured on the NAS is not correct.

·     The username is not in the userid@isp-name format, or the ISP domain is not correctly configured on the NAS.

·     The user is not configured on the LDAP server.

·     The password entered by the user is incorrect.

·     The administrator DN or password is not configured.

·     Some user attributes (for example, the username attribute) configured on the NAS are not consistent with those configured on the server.

·     No user search base DN is specified for the LDAP scheme.

Solution

To resolve the problem:

1.     Verify the following items:

¡     The NAS and the LDAP server can ping each other.

¡     The IP address and port number of the LDAP server configured on the NAS match those of the server.

¡     The username is in the correct format and the ISP domain for the user authentication is correctly configured on the NAS.

¡     The user is configured on the LDAP server.

¡     The correct password is entered.

¡     The administrator DN and the administrator password are correctly configured.

¡     The user attributes (for example, the username attribute) configured on the NAS are consistent with those configured on the LDAP server.

¡     The user search base DN for authentication is specified.

2.     If the problem persists, contact H3C Support.

Appendixes

Appendix A Commonly used RADIUS attributes

Commonly used RADIUS attributes are defined in RFC 2865, RFC 2866, RFC 2867, and RFC 2868.

Table 2 Commonly used RADIUS attributes

No.

Attribute

No.

Attribute

1

User-Name

45

Acct-Authentic

2

User-Password

46

Acct-Session-Time

3

CHAP-Password

47

Acct-Input-Packets

4

NAS-IP-Address

48

Acct-Output-Packets

5

NAS-Port

49

Acct-Terminate-Cause

6

Service-Type

50

Acct-Multi-Session-Id

7

Framed-Protocol

51

Acct-Link-Count

8

Framed-IP-Address

52

Acct-Input-Gigawords

9

Framed-IP-Netmask

53

Acct-Output-Gigawords

10

Framed-Routing

54

(unassigned)

11

Filter-ID

55

Event-Timestamp

12

Framed-MTU

56-59

(unassigned)

13

Framed-Compression

60

CHAP-Challenge

14

Login-IP-Host

61

NAS-Port-Type

15

Login-Service

62

Port-Limit

16

Login-TCP-Port

63

Login-LAT-Port

17

(unassigned)

64

Tunnel-Type

18

Reply-Message

65

Tunnel-Medium-Type

19

Callback-Number

66

Tunnel-Client-Endpoint

20

Callback-ID

67

Tunnel-Server-Endpoint

21

(unassigned)

68

Acct-Tunnel-Connection

22

Framed-Route

69

Tunnel-Password

23

Framed-IPX-Network

70

ARAP-Password

24

State

71

ARAP-Features

25

Class

72

ARAP-Zone-Access

26

Vendor-Specific

73

ARAP-Security

27

Session-Timeout

74

ARAP-Security-Data

28

Idle-Timeout

75

Password-Retry

29

Termination-Action

76

Prompt

30

Called-Station-Id

77

Connect-Info

31

Calling-Station-Id

78

Configuration-Token

32

NAS-Identifier

79

EAP-Message

33

Proxy-State

80

Message-Authenticator

34

Login-LAT-Service

81

Tunnel-Private-Group-ID

35

Login-LAT-Node

82

Tunnel-Assignment-id

36

Login-LAT-Group

83

Tunnel-Preference

37

Framed-AppleTalk-Link

84

ARAP-Challenge-Response

38

Framed-AppleTalk-Network

85

Acct-Interim-Interval

39

Framed-AppleTalk-Zone

86

Acct-Tunnel-Packets-Lost

40

Acct-Status-Type

87

NAS-Port-Id

41

Acct-Delay-Time

88

Framed-Pool

42

Acct-Input-Octets

89

(unassigned)

43

Acct-Output-Octets

90

Tunnel-Client-Auth-id

44

Acct-Session-Id

91

Tunnel-Server-Auth-id

 

Appendix B Descriptions for commonly used standard RADIUS attributes

No.

Attribute

Description

1

User-Name

Name of the user to be authenticated.

2

User-Password

User password for PAP authentication, only present in Access-Request packets when PAP authentication is used.

3

CHAP-Password

Digest of the user password for CHAP authentication, only present in Access-Request packets when CHAP authentication is used.

4

NAS-IP-Address

IP address for the server to use to identify the client. Typically, a client is identified by the IP address of its access interface. This attribute is only present in Access-Request packets.

5

NAS-Port

Physical port of the NAS that the user accesses.

6

Service-Type

Type of service that the user has requested or type of service to be provided.

7

Framed-Protocol

Encapsulation protocol for framed access.

8

Framed-IP-Address

IP address assigned to the user.

11

Filter-ID

Name of the filter list. This attribute is parsed as follows:

·     If the name is a string of all digits, it indicates an ACL number.

·     If the name is a string in the format of user-group=name1;name2;..;namex, it indicates a list of user group names. This type of filter list is applicable only to SSL VPN users.

·     If the name is not a string of all digits and the name string does not contain an equal sign (=), it indicates a user profile name.

12

Framed-MTU

MTU for the data link between the user and NAS. For example, this attribute can be used to define the maximum size of EAP packets allowed to be processed in 802.1X EAP authentication.

14

Login-IP-Host

IP address of the NAS interface that the user accesses.

15

Login-Service

Type of service that the user uses for login.

18

Reply-Message

Text to be displayed to the user, which can be used by the server to communicate information, for example, the cause of the authentication failure.

26

Vendor-Specific

Vendor-specific proprietary attribute. A packet can contain one or more proprietary attributes, each of which can contain one or more subattributes.

27

Session-Timeout

Maximum service duration for the user before termination of the session.

28

Idle-Timeout

Maximum idle time permitted for the user before termination of the session.

31

Calling-Station-Id

User identification that the NAS sends to the server. For the LAN access service provided by an H3C device, this attribute includes the MAC address of the user.

32

NAS-Identifier

Identification that the NAS uses to identify itself to the RADIUS server.

40

Acct-Status-Type

Type of the Accounting-Request packet. Possible values include:

·     1—Start.

·     2—Stop.

·     3—Interim-Update.

·     4—Reset-Charge.

·     7—Accounting-On. (Defined in the 3rd Generation Partnership Project.)

·     8—Accounting-Off. (Defined in the 3rd Generation Partnership Project.)

·     9 to 14—Reserved for tunnel accounting.

·     15—Reserved for failed.

45

Acct-Authentic

Authentication method used by the user. Possible values include:

·     1—RADIUS.

·     2—Local.

·     3—Remote.

60

CHAP-Challenge

CHAP challenge generated by the NAS for MD5 calculation during CHAP authentication.

61

NAS-Port-Type

Type of the physical port of the NAS that is authenticating the user. Possible values include:

·     15—Ethernet.

·     16—Any type of ADSL.

·     17—Cable. (With cable for cable TV.)

·     19—WLAN-IEEE 802.11.

·     201—VLAN.

·     202—ATM.

If the port is an ATM or Ethernet one and VLANs are implemented on it, the value of this attribute is 201.

64

Tunnel-Type

Tunneling protocols used.

The value 13 represents VLAN. If the value is 13, the device interprets the Tunnel-Type, Tunnel-Medium-Type, and Tunnel-Private-Group-ID attributes as attributes to assign VLANs.

65

Tunnel-Medium-Type

Transport medium type to use for creating a tunnel.

For VLAN assignment, the value must be 6 to indicate the 802 media plus Ethernet.

79

EAP-Message

Used to encapsulate EAP packets to allow RADIUS to support EAP authentication.

80

Message-Authenticator

Used for authentication and verification of authentication packets to prevent spoofing Access-Requests. This attribute is present when EAP authentication is used.

81

Tunnel-Private-Group-ID

Group ID for a tunnel session. To assign VLANs, the NAS conveys VLAN IDs by using this attribute.

87

NAS-Port-Id

String for describing the port of the NAS that is authenticating the user.

 

Appendix C RADIUS subattributes (vendor ID 25506)

Table 3 lists all RADIUS subattributes with a vendor ID of 25506. Support for these subattributes depends on the device model.

Table 3 RADIUS subattributes (vendor ID 25506)

No.

Subattribute

Description

1

Input-Peak-Rate

Peak rate in the direction from the user to the NAS, in bps.

2

Input-Average-Rate

Average rate in the direction from the user to the NAS, in bps.

3

Input-Basic-Rate

Basic rate in the direction from the user to the NAS, in bps.

4

Output-Peak-Rate

Peak rate in the direction from the NAS to the user, in bps.

5

Output-Average-Rate

Average rate in the direction from the NAS to the user, in bps.

6

Output-Basic-Rate

Basic rate in the direction from the NAS to the user, in bps.

15

Remanent_Volume

Total amount of data available for the connection, in different units for different server types.

17

ISP-ID

ISP domain where the user obtains authorization information.

20

Command

Operation for the session, used for session control. Possible values include:

·     1—Trigger-Request.

·     2—Terminate-Request.

·     3—SetPolicy.

·     4—Result.

·     5—PortalClear.

21

ACL-Version

IP protocol version for an ACL. This attribute is used with the Filter-ID attribute to identify the IP protocol version of the ACL in the filter list.

·     1—IPv4.

·     2—IPv6.

24

Control_Identifier

Identifier for a packet that is resent by the server.

For packets resent by the server during the same session, the value of this attribute is the same. For packets resent by the server during different sessions, the value of this attribute might be the same.

Response packets from the corresponding client must carry this attribute with the value the same as the packet resent by the server.

This attribute can be ignored in start-accounting, stop-accounting, and interim-update-accounting requests.

25

Result_Code

Result of the Trigger-Request or SetPolicy operation, zero for success and any other value for failure.

26

Connect_ID

Index of the user connection.

27

PortalURL

PADM redirect URL assigned to PPPoE users.

28

Ftp_Directory

FTP, SFTP, or SCP user working directory.

When the RADIUS client acts as the FTP, SFTP, or SCP server, this attribute is used to set the working directory for an FTP, SFTP, or SCP user on the RADIUS client.

29

Exec_Privilege

EXEC user priority.

32

NAT-IP-Address

Public IP address assigned to the user when the source IP address and port are translated.

33

NAT-Start-Port

Start port number of the port range assigned to the user when the source IP address and port are translated.

34

NAT-End-Port

End port number of the port range assigned to the user when the source IP address and port are translated.

59

NAS_Startup_Timestamp

Startup time of the NAS in seconds, which is represented by the time elapsed after 00:00:00 on Jan. 1, 1970 (UTC).

60

Ip_Host_Addr

User IP address and MAC address included in authentication and accounting requests, in the format A.B.C.D hh:hh:hh:hh:hh:hh. A space is required between the IP address and the MAC address.

61

User_Notify

Information that must be sent from the server to the client transparently.

62

User_HeartBeat

Hash value assigned after an 802.1X user passes authentication, which is a 32-byte string. This attribute is stored in the user list on the NAS and verifies the handshake packets from the 802.1X user. This attribute only exists in Access-Accept and Accounting-Request packets.

98

Multicast_Receive_Group

IP address of the multicast group that the user's host joins as a receiver. This subattribute can appear multiple times in a multicast packet to indicate that the user belongs to multiple multicast groups.

100

IP6_Multicast_Receive_Group

IPv6 address of the multicast group that the user's host joins as a receiver. This subattribute can appear multiple times in a multicast packet to indicate that the user belongs to multiple multicast groups.

101

MLD-Access-Limit

Maximum number of MLD multicast groups that the user can join concurrently.

102

local-name

L2TP local tunnel name.

103

IGMP-Access-Limit

Maximum number of IGMP multicast groups that the user can join concurrently.

104

VPN-Instance

MPLS L3VPN instance to which a user belongs.

105

ANCP-Profile

ANCP profile name.

111

Longitude-Latitude

Longitude and latitude information of the NAS.

135

Client-Primary-DNS

IP address of the primary DNS server.

136

Client-Secondary-DNS

IP address of the secondary DNS server.

140

User_Group

User groups assigned after the SSL VPN user passes authentication. A user can belong to multiple user groups that are separated by semicolons. This attribute is used to work with the SSL VPN device.

141

Security_Level

Security level assigned after the SSL VPN user passes security authentication.

144

Acct_IPv6_Input_Octets

Bytes of IPv6 packets in the inbound direction. The measurement unit depends on the configuration on the device.

145

Acct_IPv6_Output_Octets

Bytes of IPv6 packets in the outbound direction. The measurement unit depends on the configuration on the device.

146

Acct_IPv6_Input_Packets

Number of IPv6 packets in the inbound direction. The measurement unit depends on the configuration on the device.

147

Acct_IPv6_Output_Packets

Number of IPv6 packets in the outbound direction. The measurement unit depends on the configuration on the device.

148

Acct_IPv6_Input_Gigawords

Bytes of IPv6 packets in the inbound direction. The measurement unit is 4G bytes.

149

Acct_IPv6_Output_Gigawords

Bytes of IPv6 packets in the outbound direction. The measurement unit is 4G bytes.

155

User-Roles

List of space-separated user roles.

182

Microsegment-Id

Microsegment ID.

210

Av-Pair

User-defined attribute pair. Available attribute pairs include:

·     Server-assigned voice VLAN in the format of device-traffic-class=voice.

·     Server-assigned user role in the format of shell:role=xxx.

·     Server-deployed command to reboot a port, in the format of subscriber:command=bounce-host-port.

·     Server-assigned port shutdown duration in the format of bounce:seconds=xxx.

·     Server-deployed command to shut down a port, in the format of subscriber:command=disable-host-port.

215

Accounting-Level

ITA traffic level in the range of 1 to 8.

216

Ita-Policy

ITA policy name.

218

H3c-DHCP-Option

DHCP option information of the user. This attribute includes the following fields:

·     Type—Type of the option attribute. By default, the length of this field is 1 byte. You can use the include-attribute h3c-dhcp-option format format2 command to change the length of this field to 2 bytes to meet the requirement of HUAWEI servers.

·     Length—Length of the Value field.

·     Value—Value of the option attribute.

246

Auth_Detail_Result

Accounting details. The server sends Access-Accept packets with subattributes 246 and 250 in the following situations:

·     1—The subscriber charge is overdue. The subscriber is allowed to access network resources in the whitelist. If the subscriber accesses other network resources, the device redirects it to the URL specified by subattribute 250.

·     2—The broadband lease of the subscriber expires. The device redirects the subscriber to the URL specified by subattribute 250 when the subscriber requests to access webpages for the first time.

247

Input-Committed-Burst-Size

Committed burst size from the user to the NAS, in bits. The total length cannot exceed 4 bytes for this field.

This subattribute must be assigned together with the Input-Average-Rate attribute.

248

Output-Committed-Burst-Size

Committed burst size from the NAS to the user, in bits. The total length cannot exceed 4 bytes for this field.

This subattribute must be assigned together with the Output-Average-Rate attribute.

249

authentication-type

Authentication type. The value can be:

·     1—Intranet access authentication.

·     2—Internet access authentication.

If the packet does not contain this subattribute, common authentication applies.

250

WEB-URL

Redirect URL for PPP users.

251

Subscriber-ID

Family plan ID.

252

Subscriber-Profile

QoS policy name for the family plan of the subscriber.

255

Product_ID

Product name.

 

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网