Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 04-Data buffer commands | 39.16 KB |
Data buffer commands
burst-mode enable
Use burst-mode enable to enable the Burst feature.
Use undo burst-mode enable to disable the Burst feature.
Syntax
burst-mode enable
undo burst-mode enable
Default
The Burst feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The Burst feature is especially useful for reducing packet losses under the following circumstances:
· Broadcast or multicast traffic is intensive, resulting in bursts of traffic.
· Traffic enters a device from a high-speed interface and goes out of a low-speed interface.
· Traffic enters a device from multiple same-rate interfaces and goes out of an interface with the same rate.
Examples
# Enable the Burst feature.
<Sysname> system-view
[Sysname] burst-mode enable
