Login
- Table of Contents
-
- 01-Fundamentals Command Reference
- 00-Preface
- 01-CLI commands
- 02-RBAC commands
- 03-Login management commands
- 04-FTP and TFTP commands
- 05-File system management commands
- 06-Configuration file management commands
- 07-Software upgrade commands
- 08-ISSU commands
- 09-Device management commands
- 10-Tcl commands
- 11-Python commands
- 12-License management commands
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 12-License management commands | 61.65 KB |
License management commands
display license
Use display license to display detailed license information.
Syntax
display license [ activation-file ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
activation-file: Displays information about activation files.
slot slot-number: Specifies the member ID of an IRF member device. If no member device is specified, this command displays license information for all IRF member devices.
Usage guidelines
The display license command displays detailed information about all licenses if it is used without the activation-file keyword.
Examples
# Display detailed information about all licenses.
<Sysname> display license
flash:/license/2014072009113494375.ak
Feature: APMGR
Product Description: H3C S5560 Data Center License
Registered at: 2014-05-07 15:07:39
License Type: Permanent
Current State: In use
Table 1 Command output
|
Field |
Description |
|
Feature |
Feature name. |
|
Registered at |
Time when the license was installed. |
|
License Type |
License type by validity period. The license type is always Permanent, indicating that the license is a purchased license that never expires and is always valid. |
|
Current State |
State of the license: · In use—The license is being used. · Usable—The license is available for use. · Expired—The license has expired. · Uninstalled—The license has been uninstalled. · Unusable—The license cannot be used. · Invalid—The license is invalid and cannot be used. |
|
Uninstall Key |
This field is available for licenses that have been uninstalled. When you uninstall an activation file, an Uninstall file that contains an Uninstall key is created. |
|
Uninstall Date |
Date when the activation file was uninstalled. |
display license device-id
Use display license device-id to display SN and DID information.
Syntax
display license device-id slot slot-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
When you register a license for a device, you must provide its unique SN and DID.
The DID changes each time you use the license compress command to compress the license storage. Use the display license device-id command to identify the up-to-date DID each time you register licenses.
The DID can be generated as an .id file. Upload the file when you register the license with the license center.
Examples
# Display the SN and DID for the specified slot.
<Sysname> display license device-id slot 1
SN: 210235A045B05B0004350
Device ID: flash:/license/210235A045B05B0004350.did
display license feature
Use display license feature to display brief license information for features.
Syntax
display license feature
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Feature license information includes the following information:
· The total number of licenses that the device supports.
· The number of installed licenses.
· Features that must be licensed to run on the device.
Examples
# Display brief feature license information.
<Sysname> display license feature
Slot 1:
Total: 64 Usage: 0
Feature Licensed State
APMGR N -
Table 2 Command output
|
Field |
Description |
|
Total |
Total number of licenses that can be installed. |
|
Usage |
Number of installed licenses. |
|
Feature |
Feature that must be licensed before being used. The device does not support EVI in the current software version. |
|
Licensed |
Licensing state of the feature: · N—Not licensed. · Y—Licensed. |
|
State |
License type by purchasing state: If the feature is not licensed, this field displays a hyphen (-). To use the feature, you must install a valid license file. |
license activation-file install
Use license activation-file install to install an activation file.
Syntax
license activation-file install file-name slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters. The activation file must be valid and stored on the device.
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
To install a license activation file successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device.
Activation files are device locked rather than MPU locked. A licensed feature can run on the entire system even after an MPU replacement.
Examples
# Install the activation file 20130811.ak to the specified slot.
<Sysname> system-view
[Sysname] license activation-file install flash:/license/20130811.ak slot 1
This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...
Related commands
display license activation-file
display license device-id
license activation-file uninstall
license activation-file uninstall
Use license activation-file uninstall to uninstall an activation file.
Syntax
license activation-file uninstall file-name slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters.
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
Use this command to revoke an unexpired license if you want to transfer the license from one device to another.
When an activation file is uninstalled, the system creates an Uninstall file. Use this file together with the SN and DID of the transfer destination to register the license for the transfer destination.
A feature cannot run after you uninstall all of its activation files.
Examples
# Uninstall the activation file flash:/license/20130811.ak from the specified slot.
<Sysname> system-view
[Sysname] license activation-file uninstall flash:/license/20130811.ak slot 1
This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...
Uninstall file: flash:/license/20130811.uak
display license activation-file
license activation-file install
license compress
Use license compress to compress the license storage.
Syntax
license compress slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
Use this command if the free license storage (see the display license feature command) is not sufficient.
The DID changes each time the license storage is compressed. Before performing a compression, make sure all licenses registered with the old DID have been installed. They cannot be installed after the compression.
This command clears invalid licenses (expired licenses and uninstalled licenses) and Uninstall keys from the license storage area. Back up the Uninstall keys before you compress the license storage.
Examples
# Compress the license storage on the specified slot.
<Sysname> system-view
[Sysname] license compress slot 1
This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files. Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.
Are you sure you want to continue? [Y/N]: Y
This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...
