As a best practice, store the startup images in a fixed storage medium. If you store the startup images in a hot swappable storage medium, do not remove the hot swappable storage medium during the startup process.

boot-loader file

Use boot-loader file to specify startup image files.

Syntax

In standalone mode:

boot-loader file boot filename system filename [ feature filename&<1-30> ] [ patch filename&<1-30> ] { all | slot slot-number } { backup | main }

boot-loader file ipe-filename [ patch filename&<1-30> ] { all | slot slot-number } { backup | main }

In IRF mode:

boot-loader file boot filename system filename [ feature filename&<1-30> ] [ patch filename&<1-30> ] { all | chassis chassis-number slot slot-number } { backup | main }

boot-loader file ipe-filename [ patch filename&<1-30> ] { all | chassis chassis-number slot slot-number } { backup | main }

Views

User view

Predefined user roles

network-admin

Parameters

boot: Specifies a boot image file.

system: Specifies a system image file.

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a space-separated list of up to 16 patch image files. You can specify both incremental and non-incremental patch image files. The device can use a maximum of 30 incremental patch image files. Because the boot, system, and feature images each can have one non-incremental patch image file, the device can use a maximum of 16 non-incremental patch image files.

filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

ipe-filename: Specifies an .ipe image package file in the filesystemname/filename.ipe format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

all: Specifies all MPUs.

slot slot-number: Specifies the slot number of an MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies an MPU in the IRF fabric. The chassis-number argument represents the IRF member ID of the device that holds the MPU. The slot-number argument represents the slot number of the MPU. (In IRF mode.)

backup: Specifies the files as backup startup image files. Backup images are used only when main images are not available.

main: Specifies the files as main startup image files. The device always first attempts to start up with main startup files.

Usage guidelines

To load the specified startup software images, you must reboot the system.

The boot-loader file command overwrites the entire startup image list. To add new startup feature images, specify all feature image files in the old startup image list, including feature image files. The new startup image list will contain only the feature image files that are specified in the command.

If the upgrade images are not found in the file system on the slot specified to upgrade, the system automatically copies the images to that file system. The destination directory is the root directory of the file system. If the destination root directory already contains a startup image with the same name as an upgrade image, you must choose whether to overwrite the image.

Examples

# (In standalone mode.) Specify flash:/all.ipe as the main startup image file for slot 1.

<Sysname> boot-loader file flash:/all.ipe slot 1 main

Verifying the IPE file and the images............Done.

H3C CR16000-F images in IPE:

boot.bin

system.bin

This command will set the main startup software images. Continue? [Y/N]:Y

Add images to slot 1.

File flash:/boot.bin already exists on slot 1.

File flash:/system.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:Y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin...............................Done.

Verifying the file flash:/boot.bin on slot 1...Done.

Verifying the file flash:/system.bin on slot 1.............Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

# (In standalone mode.) Specify flash:/all.ipe as the main startup image file.

<Sysname> boot-loader file flash:/all.ipe all main

Verifying the IPE file and the images.............Done.

H3C CR16000-F images in IPE:

boot.bin

system.bin

This command will set the main startup software images. Continue? [Y/N]:y

Add images to slot 1.

File flash:/boot.bin already exists on slot 1.

File flash:/system.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin...............................Done.

Verifying the file flash:/boot.bin on slot 1...Done.

Verifying the file flash:/system.bin on slot 1.............Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

File flash:/boot.bin already exists on slot 0.

Do you want to overwrite the file?

Y: Overwrite the file.

N: Not overwrite the file.

A: From now on, overwrite or not overwrite without prompt.

Please make a choice. [Y/N/A]:a

What type of overwrite operation do you want to perform?

Y: Overwrite without prompt.

N: Not overwrite or display prompt.

Q: Return to the previous step.

Please make a choice. [Y/N/Q]:y

An existing file will be overwritten without prompt if it has the same name as any upgrade file.

Loading......................Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 0.

Decompression completed.

Do you want to delete flash:/all.ipe now? [Y/N]:n

Related commands

display boot-loader

boot-loader update

Use boot-loader update to synchronize startup images.

Syntax

In standalone mode:

boot-loader update { all | slot slot-number }

In IRF mode:

boot-loader update { all | chassis chassis-number slot slot-number }

Views

User view

Predefined user roles

network-admin

Parameters

all: Synchronizes startup images from the active MPU to the standby MPU. (In standalone mode.)

all: Synchronizes startup images from the global active MPU to all standby MPUs. (In IRF mode.)

slot slot-number: Specifies the slot number of the standby MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a standby MPU. The chassis-number argument represents the IRF member ID of the device that holds the MPU. The slot-number argument represents the slot number of the MPU. (In IRF mode.)

Usage guidelines

You can use this command to synchronize startup images after adding new MPUs.

The images used for synchronization are in the main or backup startup software images list instead of the current software images list (see the display boot-loader command).

· The main images list is used if the active MPU (in standalone mode) or global active MPU (in IRF mode) started up with the main startup images.

· The backup image list is used if the active MPU (in standalone mode) or global active MPU (in IRF mode) started up with the backup startup images.

The startup images synchronized to a standby MPU are set as main startup images, regardless of whether the source startup images are main or backup.

Only feature images and patch images can be synchronized from the global active MPU to global standby MPUs. Boot images and system images cannot be synchronized.

Startup image synchronization fails if any software image being synchronized is not available or is corrupted.

Examples

# Synchronize startup images to slot 2.

<Sysname> boot-loader update slot 2

This command will update the specified standby MPU. Continue? [Y/N]:y

Updating. Please wait...

Verifying the file flash:/boot.bin on slot 1...Done.

Verifying the file flash:/system.bin on slot 1....Done.

Copying main startup software images to slot 2. Please wait...

Done.

Setting copied images as main startup software images for slot 2...

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 2.

Done.

Successfully updated the startup software images of slot 2.

Related commands

display boot-loader

bootrom backup

Use bootrom backup to back up the BootWare image in the Normal area to the Backup area on a BootWare.

Syntax

In standalone mode:

bootrom backup slot slot-number-list [ subslot subslot-number-list ]

In IRF mode:

bootrom backup chassis chassis-number slot slot-number-list [ subslot subslot-number-list ]

Views

User view

Predefined user roles

network-admin

Parameters

slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item specifies a card by its slot number or a range of cards in the form of start-slot-number to end-slot-number. The end slot number must be equal to or greater than the start slot number. (In standalone mode.)

chassis chassis-number: Specifies an IRF member device by its member ID. (In IRF mode.)

slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item specifies a card by its slot number or a range of cards in the form of start-slot-number to end-slot-number on the specified IRF member device. The end slot number must be equal to or greater than the start slot number. (In IRF mode.)

subslot subslot-number-list: Specifies a list of up to seven subslot number items. An item specifies a subcard by its subslot number or a range of subcards in the form of start-subslot-number to end-subslot-number. If you do not specify a subcard, this command backs up the BootWare image for the base card.

Usage guidelines

CSPC-GE16XP4L-E, CSPC-GE24L-E, CSPC-GP24GE8XP2L-E, CSPEX, and CEPC cards do not support this command.

A BootWare is divided into a Normal area and a Backup area. The BootWare image is stored in the Normal area and backed up to the Backup area. At startup, the system reads the BootWare image automatically from the Normal area. If the image is inaccessible, the system reads the BootWare image from the Backup area.

If the BootWare image in the Normal area is corrupted or requires a version rollback, use the bootrom restore command to copy the BootWare image in the Backup area to the Normal area.

Examples

# (In standalone mode.) Back up the entire BootWare image from the Normal area to the Backup area.

<Sysname> bootrom backup slot 1

Now backing up the Boot ROM, please wait.........Done.

Related commands

bootrom restore

Use bootrom restore to replace the BootWare image in the Normal area with the BootWare image in the Backup area for image restoration or version rollback.

Syntax

In standalone mode:

bootrom restore slot slot-number-list [ subslot subslot-number-list ]

In IRF mode:

bootrom restore chassis chassis-number slot slot-number-list [ subslot subslot-number-list ]

Views

User view

Predefined user roles

network-admin

Parameters

chassis chassis-number: Specifies an IRF member device by its member ID. (In IRF mode.)

slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item specifies a card by its slot number or a range of cards in the form of start-slot-number to end-slot-number on the specified IRF member device. The end slot number must be equal to or greater than the start slot number. (In IRF mode.)

subslot subslot-number-list: Specifies a list of up to seven subslot number items. Each item specifies a subcard by its subslot number or a range of subcards in the form of start-subslot-number to end-subslot-number. If you do not specify a subcard, this command restores the BootWare image for the base card.

Examples

# (In standalone mode.) Restore the entire BootWare image.

<Sysname> bootrom restore slot 1

This command will restore the Boot ROM file on the specified board(s), Continue? [Y/N]:y

Now restoring the Boot ROM, please wait.........Done.

Related commands

bootrom backup

bootrom update

Use bootrom update to load the BootWare image on a file system to the Normal area of BootWare.

Syntax

In standalone mode:

bootrom update file file slot slot-number-list [ subslot subslot-number-list ]

In IRF mode:

bootrom update file file chassis chassis-number slot slot-number-list [ subslot subslot-number-list ]

Views

User view

Predefined user roles

network-admin

Parameters

file file: Specifies the file that contains the BootWare image. The file argument represents the file name, a string of 1 to 63 characters.

chassis chassis-number: Specifies an IRF member device by its member ID. (In IRF mode.)

slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item specifies a card by its slot number or a range of cards in the form of start-slot-number to end-slot-number on the specified IRF member device. The end slot number must be equal to or greater than the start slot number. (In IRF mode.)

Usage guidelines

BootWare images are contained in the .bin Comware boot image file. You can specify a Comware boot image file in this command to upgrade the BootWares in the system before you upgrade the Comware images. If you do not upgrade BootWares before upgrading Comware images, the system automatically upgrades BootWares as necessary when loading Comware images.

The new BootWare images take effect after you reboot the device.

Examples

# (In standalone mode.) Use the a.bin file in the root directory of the flash memory to upgrade the BootWare image.

<Sysname> bootrom update file flash:/a.bin slot 1

This command will update the Boot ROM file on the specified board(s), Continue? [Y/N]:y

Now updating the Boot ROM, please wait................Done.

Related commands

boot-loader file

bootrom-update security-check enable

Use bootrom-update security-check enable to enable BootWare image validity check.

Use undo bootrom-update security-check enable to disable BootWare image validity check.

Syntax

bootrom-update security-check enable

undo bootrom-update security-check enable

Default

BootWare image validity check is enabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

Before a BootWare image upgrade starts, this feature examines the validity of the upgrade BootWare image and its compatibility with hardware. If the BootWare image is valid and compatible with hardware, the upgrade process starts. If not, the system does not perform the upgrade.

Examples

# Enable BootWare image validity check.

<Sysname> system-view

[Sysname] bootrom-update security-check enable

display boot-loader

Use display boot-loader to display current software images and startup software images.

Syntax

In standalone mode:

display boot-loader [ slot slot-number ]

In IRF mode:

display boot-loader [ chassis chassis-number [ slot slot-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the slot number of an MPU. If you do not specify an MPU, this command displays the software images on each MPU. (In standalone mode.)

chassis chassis-number [ slot slot-number ]: Specifies an IRF member device or an MPU in an IRF member device. The chassis-number argument represents the IRF member ID of the device. The slot-number argument represents the slot number of the MPU on the device. If you do not specify an IRF member device, this command displays the software images on each MPU in the IRF fabric. If you specify an IRF member device without specifying an MPU, this command displays the software images on each MPU on the specified member device. (In IRF mode.)

Examples

# (In standalone mode.) Display the current software images and startup software images.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

flash:/boot.bin

flash:/system.bin

Main startup software images:

flash:/boot.bin

flash:/system.bin

Backup startup software images:

flash:/boot.bin

flash:/system.bin

Table 1 Command output

Field	Description
Current software images	Comware images that have been loaded.
Main startup software images	Primary Comware images for the next startup.
Backup startup software images	Backup Comware images for the next startup.

Related commands

boot-loader file

display install active

Use display install active to display active software images.

Syntax

In standalone mode:

display install active [ slot slot-number ] [ verbose ]

In IRF mode:

display install active [ chassis chassis-number slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays information for all cards. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays information for all cards. (In IRF mode.)

verbose: Displays detailed information. If you do not specify this keyword, the command displays only image names.

Examples

# (In standalone mode.) Display brief information about active software images.

<Sysname> display install active

Active packages on slot 1:

flash:/boot.bin

flash:/system.bin

flash:/feature.bin

# (In standalone mode.) Display detailed information about active software images.

<Sysname> display install active verbose

Active packages on slot 1:

flash:/boot.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: boot

Platform version: 7.1.075

Product version: Test 2201

Supported board: mpu

[Component]

Component: boot

Description: boot package

flash:/system.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: system

Platform version: 7.1.075

Product version: Test 2201

Supported board: mpu

[Component]

Component: system

Description: system package

flash:/feature.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: test

Platform version: 7.1.075

Product version: Test 2201

Supported board: mpu

[Component]

Component: test

Description: test package

Table 2 Command output

Field	Description
Active packages on slot n	Active patch images on the card in the specified slot. (In standalone mode.)
[Package]	Detailed information about the patch image.
Service name	Image type: · boot—Boot image. · system—System image. · boot patch—Patch image for the boot image. · system patch—Patch image for the system image. · Any other value indicates a feature image.
Supported board	Cards supported by the image: · mpu—MPU. · lpu—Service module. · sfc—Switching fabric module.
[Component]	Information about components included in the image file.

Related commands

install activate

display install backup

Use display install backup to display backup software images.

Syntax

In standalone mode:

display install backup [ slot slot-number ] [ verbose ]

In IRF mode:

display install backup [ chassis chassis-number slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays information for all cards. (In standalone mode.)

verbose: Displays detailed information. If you do not specify this keyword, the command displays only image names.

Usage guidelines

Backup startup images are used only when the main boot or system image is missing or corrupt. For more information, see software upgrade in Fundamentals Configuration Guide.

To modify the backup startup image list, use the boot-loader file command.

Examples

# (In standalone mode.) Display brief information about backup software images.

<Sysname> display install backup

Backup startup software images on slot 1:

flash:/boot.bin

flash:/system.bin

# (In standalone mode.) Display detailed information about backup software images.

<Sysname> display install backup verbose

Backup startup software images on slot 1:

flash:/boot.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: boot

Platform version: 7.1

Product version: Beta 1330

Supported board: mpu

[Component]

Component: boot

Description: boot package

flash:/system.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: system

Platform version: 7.1

Product version: Beta 1330

Supported board: mr, lc, sfc

[Component]

Component: system

Description: system package

For information about the command output, see Table 2.

Related commands

boot-loader file

display install committed

Use display install committed to display main startup software images.

Syntax

In standalone mode:

display install committed [ slot slot-number ] [ verbose ]

In IRF mode:

display install committed [ chassis chassis-number slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays information for all cards. (In standalone mode.)

verbose: Displays detailed information. If you do not specify this keyword, the command displays only image names.

Usage guidelines

Some install commands modify the current software image list but do not modify the main startup image list. For the software image changes to take effect after a reboot, you must execute the install commit command to update the main startup image list with the image changes. You can use the display install committed command to verify the operation results.

Both the install commit and boot-loader file commands modify the main startup software image list.

Examples

# (In standalone mode.) Display brief information about main startup software images.

<Sysname> display install committed

Committed packages on slot 1:

flash:/boot.bin

flash:/system.bin

flash:/feature.bin

# (In standalone mode.) Display detailed information about main startup software images.

<Sysname> display install committed verbose

Committed packages on slot 1:

flash:/boot.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: boot

Platform version: 7.1

Product version: Beta 1330

Supported board: mr, lc, sfc

[Component]

Component: boot

Description: boot package

flash:/system.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: system

Platform version: 7.1

Product version: Beta 1330

Supported board: mr, lc, sfc

[Component]

Component: system

Description: system package

flash:/ssh-feature.bin

[Package]

Vendor: H3C

Product: CR16000-F

Service name: ssh

Platform version: 7.1

Product version: Beta 1330

Supported board: mr, lc, sfc

[Component]

Component: ssh

Description: ssh package

For information about the command output, see Table 2.

Related commands

boot-loader file

display install backup

install commit

install activate

Use install activate to activate feature or patch images.

Syntax

In standalone mode:

install activate feature filename&<1-30> slot slot-number

install activate patch filename { all | slot slot-number }

In IRF mode:

install activate feature filename&<1-30> chassis chassis-number slot slot-number

install activate patch filename { all | chassis chassis-number slot slot-number }

Views

User view

Predefined user roles

network-admin

Parameters

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a patch image file. You can specify only one patch image file for the command at a time. However, you can execute the command multiple times to activate multiple patch image files.

filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be saved in the root directory of a file system on the device. The value string excluding the file system location section (if any) can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

all: Specifies all cards on the device. (In standalone mode.)

all: Specifies all cards on the IRF fabric. (In IRFmode.)

slot slot-number: Specifies a card by its slot number. (In standalone mode.)

Usage guidelines

Images run in memory immediately after they are activated. However, only images activated by using the install activate patch filename all command still run in memory after a reboot. For other images to take effect after a reboot, you must commit the software changes by using the install commit command.

If the specified files are not stored on the MPU to be upgraded, the command copies the files to the MPU automatically.

(In standalone mode.) If you specify the active MPU for the slot slot-number option, the command takes effect on the active MPU and all LPUs. If you specify the standby MPU for the slot slot-number option, the command takes effect only on the standby MPU.

(In IRF mode.) If you specify the global active MPU for the chassis chassis-number slot slot-number option, the command takes effect on the global active MPU and all LPUs. If you specify a standby MPU for the chassis chassis-number slot slot-number option, the command takes effect on the standby MPU.

(In IRF mode.) At reboot, a subordinate device automatically synchronizes the master device's configuration and status data. You must wait for the synchronization to complete before using the install activate command on the subordinate device. To identify whether the synchronization is complete, use the display system stable state command. The synchronization is complete if the System State field displays Stable.

You can install up to 32 .bin files on the device, including one boot image file, one system image file, and up to 30 feature or patch image files.

Examples

# (In standalone mode.) Activate the feature images in feature.bin on the standby MPU (in slot 1).

<Sysname> install activate feature flash:/feature1.bin slot 1

Copying file flash:/feature1.bin to slot1#flash:/feature1.bin......Done.

Verifying the file flash:/feature1.bin on slot 1.....Done.

Upgrade summary according to following table:

flash:/feature1.bin

Running Version New Version

None Test 0001016

Slot Upgrade Way

1 Service Upgrade

Upgrading software images to compatible versions. Continue? [Y/N]:y

This operation might take several minutes, please wait...Done.

# (In IRF mode.) Activate the patch images in patch1.bin on the global standby MPU (in slot 1 of chassis 1).

<Sysname> install activate patch flash:/patch1.bin chassis 1 slot 1

Copying file flash:/patch1.bin to chassis1#slot1#flash:/patch1.bin......Done.

Verifying the file flash:/patch1.bin on chassis 1 slot 1.....Done.

This operation might take several minutes, please wait...Done.

Table 3 Command output

Field	Description
Verifying the file	The system was verifying the validity of the file.
Upgrade summary according to following table	Upgrade summary.
Running Version	Version number of the running software.
New Version	Version number of the new software.
Upgrade Way	Upgrade methods: · Service Upgrade. · File Upgrade. · Reboot. This field is displayed only for an upgrade to a compatible version. This field is not supported in the current software version.
Influenced service according to following table	Services influenced by the upgrade.
Install command does not support incompatible upgrade.	The install commands cannot be used for an upgrade to an incompatible version..

Related commands

display install active

install commit

install deactivate

install commit

Use install commit to commit software changes.

Syntax

install commit

Views

User view

Predefined user roles

network-admin

Usage guidelines

This command adds patches to the startup software image list that the device is using.

· If the device is using the main startup software image list, this command adds patches to the main startup software image list.

· If the device is using the backup startup software image list, this command adds patches to the backup startup software image list.

Both the install commit and boot-loader file commands modify the main startup software image list. To modify the backup startup image list or add inactive images as main startup images, however, you must use the boot-loader file command.

Examples

# (In standalone mode.) Commit software changes.

<Sysname> install commit

This operation will take several minutes, please wait...........................Done.

The current software images have been saved as the startup software images.

Current software images on slot 1:

flash:/boot.bin

flash:/system.bin

Current software images on slot 2:

flash:/boot.bin

flash:/system.bin

Related commands

install activate

install deactivate

Use install deactivate to deactivate feature or patch images.

Syntax

In standalone mode:

install deactivate feature filename&<1-30> slot slot-number

install deactivate patch filename { all | slot slot-number }

In IRF mode:

install deactivate feature filename&<1-30> chassis chassis-number slot slot-number

install deactivate patch filename { all | chassis chassis-number slot slot-number }

Views

User view

Predefined user roles

network-admin

Parameters

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a patch image file. You can specify only one patch image file for the command at a time. However, you can execute the command multiple times to deactivate multiple patch image files.

all: Specifies all cards on the device. (In standalone mode.)

all: Specifies all cards on the IRF fabric. (In IRFmode.)

slot slot-number: Specifies a card by its slot number. (In standalone mode.)

Usage guidelines

At reboot, a subordinate device automatically synchronizes the master device's configuration and status data. You must wait for the synchronization to complete before using the install deactivate command on the subordinate device. To identify whether the synchronization is complete, use the display system stable state command. The synchronization is complete if the System State field displays Stable.

You can deactivate only active feature and patch images.

Images deactivated by using the install deactivate patch filename all command do not run after a reboot. To prevent other deactivated images from running after a reboot, you must commit the software changes by using the install commit command.

Examples

# (In standalone mode.) Deactivate the patch images in the route-patch.bin file on the card in slot 1.

<Sysname> install deactivate patch flash:/route-patch.bin slot 1

This operation might take several minutes, please wait...Done.

# (In IRF mode.) Deactivate the patch images in the route-patch.bin file on the card in slot 1 of chassis 1.

<Sysname> install deactivate patch flash:/route-patch.bin chassis 1 slot 1

This operation might take several minutes, please wait...Done.

Related commands

display install active

display install inactive

version auto-update enable

Use version auto-update enable to enable software synchronization from active MPU to standby MPU at startup.

Use undo version auto-update enable to disable this feature.

Syntax

version auto-update enable

undo version auto-update enable

Default

Software synchronization from active MPU to standby MPU is enabled. If software inconsistency is detected at startup, the standby MPU loads the current software images of the active MPU.

Views

System view

Predefined user roles

network-admin

Usage guidelines

This command is available in standalone mode.

To make sure the standby MPU always runs the same software images as the active MPU, configure both the version auto-update enable command and the undo version check ignore command.

The startup software version check feature examines the standby MPU's startup software images for version inconsistency with the active MPU's current software images at startup. If their software versions are different, the standby MPU copies the current software images of the active MPU, specifies them as main startup software images, and reboots with these images.

To ensure a successful synchronization in a multiuser environment, make sure no one reboots or swaps MPUs during the software synchronization process. You can configure the information center to output the synchronization status to configuration terminals (see Network Management and Monitoring Configuration Guide).

Examples

# Enable software auto-update for the standby MPU.

<Sysname> system-view

[Sysname] version auto-update enable

Related commands

version check ignore

Use version check ignore to disable startup software version check for the standby MPU at startup.

Use undo version check ignore to enable this feature.

Syntax

version check ignore

undo version check ignore

Default

The startup software images on the standby MPU are checked for version inconsistency with the current software images on the active MPU.

Views

System view

Predefined user roles

network-admin

Usage guidelines

This command is available in standalone mode.

When the standby MPU starts up, this command disables the system to examine the standby MPU's startup software images for version inconsistency with the active MPU's current software images. The standby MPU can start up with a different software version than the active MPU.

To avoid anomalies, do not disable startup software version check for the standby MPU unless for software upgrade.

To make sure the standby MPU always runs the same software images as the active MPU, configure both the version auto-update enable command and the undo version check ignore command.

Examples

# Enable startup software version check for the standby MPU.

<Sysname> system-view

[Sysname] undo version check ignore

Related commands

version auto-update enable

01-Fundamentals Command Reference

Software upgrade commands

boot-loader file

boot-loader update

bootrom backup

bootrom restore

bootrom update

bootrom-update security-check enable

display boot-loader

display install active

display install backup

display install committed

install activate

install commit

install deactivate

version auto-update enable

version check ignore

Cloud & AI

InterConnect

Intelligent Computing

Security

SMB Products

Intelligent Terminal Products

Industry Solutions

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Training & Certification

Become a Partner

Partner Resources

Partner Business Management

Company Information

News & Events

Online Exhibition Center

Contact Us