Use advantage-factor to configure the advantage factor that is used to count Mean Opinion Scores (MOS) and Calculated Planning Impairment Factor (ICPIF) values.

Use undo advantage-factor to restore the default.

Syntax

advantage-factor factor

undo advantage-factor

Default

The advantage factor is 0.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

factor: Specifies the advantage factor in the range of 0 to 20.

Usage guidelines

The evaluation of voice quality depends on users' tolerance for voice quality. For users with higher tolerance for voice quality, use the advantage-factor command to configure the advantage factor. When the system calculates the ICPIF value, the specified advantage factor is subtracted to modify ICPIF and MOS values for voice quality evaluation.

Examples

# Configure the advantage factor as 10 for voice operations.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] advantage-factor 10

codec-type

Use codec-type to configure the codec type for a voice operation.

Use undo codec-type to restore the default.

Syntax

codec-type { g711a | g711u | g729a }

undo codec-type

Default

The codec type for the voice operation is G.711 A-law.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

g711a: Specifies G.711 A-law codec type.

g711u: Specifies G.711 µ-law codec type

g729a: Specifies G.729 A-law codec type.

Examples

# Configure the codec type as g729a for the voice operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] codec-type g729a

data-fill

Use data-fill to configure the payload fill string for probe packets.

Use undo data-fill to restore the default.

Syntax

data-fill string

undo data-fill

Default

The string is the hexadecimal number 00010203040506070809.

Views

ICMP/UDP echo operation view

Path/UDP jitter operation view

Voice operation view

ICMP/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

string: Specifies a case-sensitive string of 1 to 200 characters.

Usage guidelines

If the payload length is smaller than the string length, only the first part of the string is filled. For example, if you configure the string as abcd and the payload size as 3 bytes, abc is filled.

If the payload length is greater than the string length, the system fills the payload with the string cyclically until the payload is full. For example, if you configure the string as abcd and the payload size as 6 bytes, abcdab is filled.

How the string is filled depends on the operation type.

· For the ICMP echo operation, the string fills the whole payload of an ICMP echo request.

· For the UDP echo operation, the first five bytes of the payload of a UDP packet are for special purpose. The string fills the remaining part of payload.

· For the UDP jitter operation, the first 68 bytes of the payload of a UDP packet are for special purpose. The string fills the remaining part of the payload.

· For the voice operation, the first 16 bytes of the payload of a UDP packet are for special purpose. The string fills the remaining part of the payload.

· For the path jitter operation, the first four bytes of the payload of an ICMP echo request are for special purpose. The string fills the remaining part of payload.

Examples

# Specify abcd as the payload fill string for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] data-fill abcd

# In TCP template view, specify abcd as the payload fill string for requests.

<Sysname> system-view

[Sysname] nqa template tcp tcptplt

[Sysname-nqatplt-tcp-tcptplt] data-fill abcd

data-size

Use data-size to configure the size of the payload in each probe packet.

Use undo data-size to restore the default.

Syntax

data-size size

undo data-size

Default

The default payload size of a probe packet for different operations is described in Table 1.

Table 1 Default payload size of a probe packet

Operation type	Codec type	Default size (bytes)
ICMP echo	N/A	100
UDP echo	N/A	100
UDP jitter	N/A	100
UDP tracert	N/A	100
Path jitter	N/A	100
Voice	G.711 A-law	172
Voice	G.711 µ-law	172
Voice	G.729 A-law	32

Views

ICMP/UDP echo operation view

Path/UDP jitter operation view

UDP tracert operation view

Voice operation view

ICMP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

size: Specifies the size of the payload in each probe packet in bytes. Available value ranges include:

· 20 to 65507 for the ICMP echo, UDP echo, or UDP tracert operation.

· 68 to 65507 for the UDP jitter or path jitter operation.

· 16 to 65507 for the voice operation.

Usage guidelines

In ICMP echo and path jitter operations, the command sets the payload size for each ICMP echo request.

In UDP echo, UDP jitter, UDP tracert, and voice operations, the command sets the payload size for each UDP packet.

Examples

# Set the payload size to 80 bytes for each ICMP echo request.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] data-size 80

# In ICMP template view, set the payload size to 80 bytes for each request.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] data-size 80

description (any NQA operation type view)

Use description to configure a description for an NQA operation, such as the operation type or purpose.

Use undo description to remove the description.

Syntax

description text

undo description

Default

No description is configured for an NQA operation.

Views

Any NQA operation type view, any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

text: Specifies a case-sensitive string of 1 to 200 characters.

Examples

# Configure the description for an NQA operation as icmp-probe.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] description icmp-probe

# In ICMP template view, configure the description for an NQA operation as icmp-probe.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] description icmp-probe

destination ip

Use destination ip to configure the destination IP address for the operation.

Use undo destination ip to remove the destination IP address.

Syntax

destination ip ip-address

undo destination ip

Default

No destination IP address is configured for the operation.

Views

DHCP/DLSw/DNS/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

Path/UDP jitter operation view

UDP tracert operation view

DNS/ICMP/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the destination IP address for the operation.

Examples

# Configure the destination IP address as 10.1.1.1 for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1

# In ICMP template view, configure the destination IP address as 10.1.1.1 for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] destination ip 10.1.1.1

destination ipv6

Use destination ipv6 to configure the destination IPv6 address for the operation.

Use undo destination ipv6 to remove the destination IPv6 address.

Syntax

destination ipv6 ipv6-address

undo destination ipv6

Default

No destination IPv6 address is configured for the operation.

Views

DNS/ICMP/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address: Specifies the destination IPv6 address for the operation. IPv6 link-local addresses are not supported.

Examples

# In ICMP template view, configure the destination IPv6 address as 1::1 for the operation.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1

destination port

Use destination port to configure the destination port number for the operation.

Use undo destination port to remove the destination port number.

Syntax

destination port port-number

undo destination port

Default

The destination port number is 33434 for the UDP tracert operation.

The destination port numbers vary for the following NQA templates:

· 53 for the DNS template.

· 21 for the FTP template.

· 80 for the HTTP template.

No destination port number is configured for other types of operations or templates.

Views

TCP/voice operation view

UDP echo operation view

UDP jitter operation view

UDP tracert operation view

DNS/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

port-number: Specifies the destination port number for the operation, in the range of 1 to 65535.

Examples

# Configure the destination port number as 9000 for the UDP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-echo

[Sysname-nqa-admin-test-udp-echo] destination port 9000

# In TCP template view, configure the destination port number as 9000 for the UDP echo operation.

<Sysname> system-view

[Sysname] nqa template tcp tcptplt

[Sysname-nqatplt-tcp-tcptplt] destination port 9000

display nqa history

Use display nqa history to display the history records of NQA operations.

Syntax

display nqa history [ admin-name operation-tag ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the command displays the history records of all NQA operations.

Usage guidelines

The display nqa history command does not display the results or statistics of UDP jitter and voice operations. Use the display nqa result or display nqa statistics command to verify the UDP jitter and voice operations.

Examples

# Display the history records of the UDP tracert operation with the administrator name administrator and the operation tag tracert.

<Sysname> display nqa history administrator tracert

NQA entry (admin administrator, tag tracert) history records:

Index TTL Response Hop IP Status Time

1 2 328 4.1.1.1 Succeeded 2013-09-09 14:46:06.2

1 2 328 4.1.1.1 Succeeded 2013-09-09 14:46:05.2

1 2 328 4.1.1.1 Succeeded 2013-09-09 14:46:04.2

1 1 328 3.1.1.2 Succeeded 2013-09-09 14:46:03.2

1 1 328 3.1.1.1 Succeeded 2013-09-09 14:46:02.2

1 1 328 3.1.1.1 Succeeded 2013-09-09 14:46:01.2

# Display the history records of the NQA operation with the administrator name administrator and the operation tag test.

<Sysname> display nqa history administrator test

NQA entry (admin administrator, tag test) history records:

Index Response Status Time

10 329 Succeeded 2011-04-29 20:54:26.5

9 344 Succeeded 2011-04-29 20:54:26.2

8 328 Succeeded 2011-04-29 20:54:25.8

7 328 Succeeded 2011-04-29 20:54:25.5

6 328 Succeeded 2011-04-29 20:54:25.1

5 328 Succeeded 2011-04-29 20:54:24.8

4 328 Succeeded 2011-04-29 20:54:24.5

3 328 Succeeded 2011-04-29 20:54:24.1

2 328 Succeeded 2011-04-29 20:54:23.8

1 328 Succeeded 2011-04-29 20:54:23.4

Table 2 Command output

Field	Description
Index	History record ID. The history records in one UDP tracert operation have the same ID.
TTL	TTL value in the probe packet.
Response	Round-trip time if the operation succeeds, timeout time upon timeout, or 0 if the operation cannot be completed, in milliseconds.
Hop IP	IP address of the node that sent the reply packet.
Status	Status of the operation result: · Succeeded. · Unknown error. · Internal error. · Timeout.
Time	Time when the operation was completed.

display nqa reaction counters

Use display nqa reaction counters to display the current monitoring results of reaction entries.

Syntax

display nqa reaction counters [ admin-name operation-tag [ item-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

item-number: Specifies a reaction entry by its ID in the range of 1 to 10. If you do not specify a reaction entry, the command displays the results of all reaction entries.

Usage guidelines

The result fields display hyphens (-) in one of the following conditions:

· The threshold type is the average value.

· The monitored performance metric is ICPIF or MOS of the voice operation.

The monitoring results of an operation are accumulated, and are not cleared after the operation completes.

Examples

# Display the monitoring results of all reaction entries of the ICMP echo operation with the administrator name admin and the operation tag test.

<Sysname> display nqa reaction counters admin test

NQA entry (admin admin, tag test) reaction counters:

Index Checked Element Threshold Type Checked Num Over-threshold Num

1 probe-duration accumulate 12 4

2 probe-duration average - -

3 probe-duration consecutive 160 56

4 probe-fail accumulate 12 0

5 probe-fail consecutive 162 2

Table 3 Command output

Field	Description
Index	ID of a reaction entry.
Checked Element	Monitored performance metric.
Threshold Type	Threshold type.
Checked Num	Number of targets that have been monitored for data collection.
Over-threshold Num	Number of threshold violations.

Table 4 Description of the threshold monitoring fields

Monitored performance metric	Threshold type	Collect data in	Checked Num	Over-threshold Num
probe-duration	accumulate	Probes after the operation starts.	Number of completed probes.	Number of probes with duration exceeding the threshold.
	average	N/A	N/A	N/A
	consecutive	Probes after the operation starts.	Number of completed probes.	Number of probes with duration exceeding the threshold.
probe-fail	accumulate	Probes after the operation starts.	Number of completed probes.	Number of probe failures.
probe-fail	consecutive	Probes after the operation starts.	Number of completed probes.	Number of probe failures.
RTT	accumulate	Packets sent after the operation starts.	Number of sent packets.	Number of packets with round-trip time exceeding threshold.
RTT	average	N/A	N/A	N/A
jitter-DS/jitter-SD	accumulate	Packets sent after the operation starts.	Number of sent packets.	Number of packets with the one-way jitter exceeding the threshold.
jitter-DS/jitter-SD	average	N/A	N/A	N/A
OWD-DS/OWD-SD	N/A	Packets sent after the operation starts.	Number of sent packets.	Number of packets with the one-way delay exceeding the threshold.
packet-loss	accumulate	Packets sent after the operation starts.	Number of sent packets.	Total packet loss.
ICPIF	N/A	N/A	N/A	N/A
MOS	N/A	N/A	N/A	N/A

display nqa result

Use display nqa result to display the most recent result of the specified NQA operation.

Syntax

display nqa result [ admin-name operation-tag ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

Examples

# Display the most recent result of the TCP operation.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 35/35/35

Square-Sum of round trip time: 1225

Last succeeded probe time: 2011-05-29 10:50:33.2

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to internal error: 0

Failures due to other errors: 0

# Display the most recent result of the UDP jitter operation.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

Send operation times: 10 Receive response times: 10

Min/Max/Average round trip time: 15/46/26

Square-Sum of round trip time: 8103

Last packet received time: 2011-05-29 10:56:38.7

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

UDP-jitter results:

RTT number: 10

Min positive SD: 8 Min positive DS: 8

Max positive SD: 18 Max positive DS: 8

Positive SD number: 5 Positive DS number: 2

Positive SD sum: 75 Positive DS sum: 32

Positive SD average: 15 Positive DS average: 16

Positive SD square-sum: 1189 Positive DS square-sum: 640

Min negative SD: 8 Min negative DS: 1

Max negative SD: 24 Max negative DS: 30

Negative SD number: 4 Negative DS number: 7

Negative SD sum: 56 Negative DS sum: 99

Negative SD average: 14 Negative DS average: 14

Negative SD square-sum: 946 Negative DS square-sum: 1495

One way results:

Max SD delay: 22 Max DS delay: 23

Min SD delay: 7 Min DS delay: 7

Number of SD delay: 10 Number of DS delay: 10

Sum of SD delay: 125 Sum of DS delay: 132

Square-Sum of SD delay: 1805 Square-Sum of DS delay: 1988

SD lost packets: 0 DS lost packets: 0

Lost packets for unknown reason: 0

# Display the most recent result of the voice operation.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

Send operation times: 1000 Receive response times: 0

Min/Max/Average round trip time: 0/0/0

Square-Sum of round trip time: 0

Last packet received time: 0-00-00 00:00:00.0

Extended results:

Packet loss ratio: 100%

Failures due to timeout: 1000

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

Voice results:

RTT number: 0

Min positive SD: 0 Min positive DS: 0

Max positive SD: 0 Max positive DS: 0

Positive SD number: 0 Positive DS number: 0

Positive SD sum: 0 Positive DS sum: 0

Positive SD average: 0 Positive DS average: 0

Positive SD square-sum: 0 Positive DS square-sum: 0

Min negative SD: 0 Min negative DS: 0

Max negative SD: 0 Max negative DS: 0

Negative SD number: 0 Negative DS number: 0

Negative SD sum: 0 Negative DS sum: 0

Negative SD average: 0 Negative DS average: 0

Negative SD square-sum: 0 Negative DS square-sum: 0

One way results:

Max SD delay: 0 Max DS delay: 0

Min SD delay: 0 Min DS delay: 0

Number of SD delay: 0 Number of DS delay: 0

Sum of SD delay: 0 Sum of DS delay: 0

Square-Sum of SD delay: 0 Square-Sum of DS delay: 0

SD lost packets: 0 DS lost packets: 0

Lost packets for unknown reason: 1000

Voice scores:

MOS value: 0.99 ICPIF value: 87

# Display the most recent result of the path jitter operation.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

Hop IP 192.168.40.210

Basic Results:

Send operation times: 10

Receive response times: 10

Min/Max/Average round trip time: 1/1/1

Square-Sum of round trip time: 10

Extended Results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

Path-Jitter Results:

Jitter number: 9

Min/Max/Average jitter: 0/0/0

Positive jitter number: 0

Min/Max/Average positive jitter: 0/0/0

Sum/Square-Sum positive jitter: 0/0

Negative jitter number: 0

Min/Max/Average negative jitter: 0/0/0

Sum/Square-Sum negative jitter: 0/0

Hop IP 192.168.50.209

Basic Results:

Send operation times: 10

Receive response times: 10

Min/Max/Average round trip time: 1/1/1

Square-Sum of round trip time: 10

Extended Results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

Path-Jitter Results:

Jitter number: 9

Min/Max/Average jitter: 0/0/0

Positive jitter number: 0

Min/Max/Average positive jitter: 0/0/0

Sum/Square-Sum positive jitter: 0/0

Negative jitter number: 0

Min/Max/Average negative jitter: 0/0/0

Sum/Square-Sum negative jitter: 0/0

# Display the most recent result of the UDP tracert operation.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

Send operation times: 6 Receive response times: 6

Min/Max/Average round trip time: 35/35/35

Square-Sum of round trip time: 1225

Last succeeded probe time: 2013-09-09 14:23:24.5

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

UDP-tracert results:

TTL Hop IP Time

1 3.1.1.1 2013-09-09 14:23:24.5

2 4.1.1.1 2013-09-09 14:23:24.5

Table 5 Command output

Field	Description
Send operation times	Number of operations.
Receive response times	Number of response packets received.
Min/Max/Average round trip time	Minimum/maximum/average round-trip time in milliseconds.
Square-Sum of round trip time	Square sum of round-trip time.
Last succeeded probe time	Time when the last successful probe was completed. If no probes are successful in an operation, the field displays 0. This field is not available for UDP jitter, path jitter, and voice operations.
Last packet received time	Time when the last response packet was received. If no response packets in a probe were received, the field displays 0. This field is available only for UDP jitter and voice operations.
Packet loss ratio	Average packet loss ratio.
Failures due to timeout	Number of timeout occurrences in an operation.
Failures due to disconnect	Number of disconnections by the peer.
Failures due to no connection	Number of failures to connect with the peer.
Failures due to internal error	Number of failures due to internal errors.
Failures due to other errors	Failures due to other errors.
Packets out of sequence	Number of failures due to out-of-sequence packets.
Packets arrived late	Number of response packets received after a probe times out.
UDP-jitter results	UDP jitter operation results. This field is available only for the UDP jitter operation.
Voice results	Voice operation results. This field is available only for the voice operation.
RTT number	Number of response packets received.
Min positive SD	Minimum positive jitter from source to destination.
Min positive DS	Minimum positive jitter from destination to source.
Max positive SD	Maximum positive jitter from source to destination.
Max positive DS	Maximum positive jitter from destination to source.
Positive SD number	Number of positive jitters from source to destination.
Positive DS number	Number of positive jitters from destination to source.
Positive SD sum	Sum of positive jitters from source to destination.
Positive DS sum	Sum of positive jitters from destination to source.
Positive SD average	Average positive jitters from source to destination.
Positive DS average	Average positive jitters from destination to source.
Positive SD square-sum	Square sum of positive jitters from source to destination.
Positive DS square-sum	Square sum of positive jitters from destination to source.
Min negative SD	Minimum absolute value among negative jitters from source to destination.
Min negative DS	Minimum absolute value among negative jitters from destination to source.
Max negative SD	Maximum absolute value among negative jitters from source to destination.
Max negative DS	Maximum absolute value among negative jitters from destination to source.
Negative SD number	Number of negative jitters from source to destination.
Negative DS number	Number of negative jitters from destination to source.
Negative SD sum	Sum of absolute values of negative jitters from source to destination.
Negative DS sum	Sum of absolute values of negative jitters from destination to source.
Negative SD average	Average absolute value of negative jitters from source to destination.
Negative DS average	Average absolute value of negative jitters from destination to source.
Negative SD square-sum	Square sum of negative jitters from source to destination.
Negative DS square-sum	Square sum of negative jitters from destination to source.
One way results	Unidirectional delay. This field is available only for the UDP jitter and voice operations.
Max SD delay	Maximum delay from source to destination.
Max DS delay	Maximum delay from destination to source.
Min SD delay	Minimum delay from source to destination.
Min DS delay	Minimum delay from destination to source.
Number of SD delay	Number of delays from source to destination.
Number of DS delay	Number of delays from destination to source.
Sum of SD delay	Sum of delays from source to destination.
Sum of DS delay	Sum of delays from destination to source.
Square-Sum of SD delay	Square sum of delays from source to destination.
Square-Sum of DS delay	Square sum of delays from destination to source.
SD lost packets	Number of lost packets from the source to the destination.
DS lost packets	Number of lost packets from the destination to the source.
Lost packets for unknown reason	Number of lost packets for unknown reasons.
Voice scores	Voice parameters. This field is available only for the voice operation.
MOS value	MOS value calculated for the voice operation.
ICPIF value	ICPIF value calculated for the voice operation.
Hop IP	IP address of the hop. This field is available only for the path jitter operation.
Path-jitter results	Path jitter operation results. This field is available only for the path jitter operation.
Jitter number	Number of jitters. This field is available only for the path jitter operation.
Min/Max/Average jitter	Minimum/maximum/average jitter in milliseconds. This field is available only for the path jitter operation.
Positive jitter number	Number of positive jitter. This field is available only for the path jitter operation.
Min/Max/Average positive jitter	Minimum/maximum/average positive jitter in milliseconds. This field is available only for the path jitter operation.
Sum/Square-Sum positive jitter	Sum/square sum of the positive jitter. This field is available only for the path jitter operation.
Negative jitter number	Number of negative jitter. This field is available only for the path jitter operation.
Min/Max/Average negative jitter	Minimum/maximum/average negative jitter in milliseconds. This field is available only for the path jitter operation.
Sum/Square-Sum negative jitter	Sum/square sum of the negative jitter. This field is available only for the path jitter operation.
TTL	TTL value in the received reply packet.
Hop IP	IP address of the node that sent the reply packet.
Time	Time when the NQA client received the reply packet.

display nqa statistics

Use display nqa statistics to display NQA operation statistics.

Syntax

display nqa statistics [ admin-name operation-tag ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

Usage guidelines

The statistics are generated after the NQA operation completes. If you execute the display nqa statistics command before the operation completes, the statistics are displayed as all 0s.

If a reaction entry is configured, the command displays the monitoring results of the reaction entry in the period specified by the statistics internal command. The result fields display hyphens (-) in one of the following conditions:

· The threshold type is average value.

· The monitored performance metric is ICPIF or MOS for the voice operation.

The command is not available for the UDP tracert operation.

Examples

# Display the statistics for the TCP operation.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

NO. : 1

Start time: 2007-01-01 09:30:20.0

Life time: 2 seconds

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 13/13/13

Square-Sum of round trip time: 169

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to internal error: 0

Failures due to other errors: 0

# Display the statistics for the UDP jitter operation.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

NO. : 1

Start time: 2007-01-01 09:33:22.3

Life time: 23 seconds

Send operation times: 100 Receive response times: 100

Min/Max/Average round trip time: 1/11/5

Square-Sum of round trip time: 24360

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

UDP-jitter results:

RTT number: 550

Min positive SD: 1 Min positive DS: 1

Max positive SD: 7 Max positive DS: 1

Positive SD number: 220 Positive DS number: 97

Positive SD sum: 283 Positive DS sum: 287

Positive SD average: 1 Positive DS average: 2

Positive SD square-sum: 709 Positive DS square-sum: 1937

Min negative SD: 2 Min negative DS: 1

Max negative SD: 10 Max negative DS: 1

Negative SD number: 81 Negative DS number: 94

Negative SD sum: 556 Negative DS sum: 191

Negative SD average: 6 Negative DS average: 2

Negative SD square-sum: 4292 Negative DS square-sum: 967

One way results:

Max SD delay: 5 Max DS delay: 5

Min SD delay: 1 Min DS delay: 1

Number of SD delay: 550 Number of DS delay: 550

Sum of SD delay: 1475 Sum of DS delay: 1201

Square-Sum of SD delay: 5407 Square-Sum of DS delay: 3959

SD lost packets: 0 DS lost packets: 0

Lost packets for unknown reason: 0

Reaction statistics:

Index Checked Element Threshold Type Checked Num Over-threshold Num

1 jitter-DS accumulate 90 25

2 jitter-SD average - -

3 OWD-DS - 100 24

4 OWD-SD - 100 13

5 packet-loss accumulate 0 0

6 RTT accumulate 100 52

# Display the statistics for the voice operation.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

NO. : 1

Start time: 2007-01-01 09:33:45.3

Life time: 120 seconds

Send operation times: 10 Receive response times: 10

Min/Max/Average round trip time: 1/12/7

Square-Sum of round trip time: 620

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

Voice results:

RTT number: 10

Min positive SD: 3 Min positive DS: 1

Max positive SD: 10 Max positive DS: 1

Positive SD number: 3 Positive DS number: 2

Positive SD sum: 18 Positive DS sum: 2

Positive SD average: 6 Positive DS average: 1

Positive SD square-sum: 134 Positive DS square-sum: 2

Min negative SD: 3 Min negative DS: 1

Max negative SD: 9 Max negative DS: 1

Negative SD number: 4 Negative DS number: 2

Negative SD sum: 25 Negative DS sum: 2

Negative SD average: 6 Negative DS average: 1

Negative SD square-sum: 187 Negative DS square-sum: 2

One way results:

Max SD delay: 0 Max DS delay: 0

Min SD delay: 0 Min DS delay: 0

Number of SD delay: 0 Number of DS delay: 0

Sum of SD delay: 0 Sum of DS delay: 0

Square-Sum of SD delay: 0 Square-Sum of DS delay: 0

SD lost packets: 0 DS lost packets: 0

Lost packets for unknown reason: 0

Voice scores:

Max MOS value: 4.40 Min MOS value: 4.40

Max ICPIF value: 0 Min ICPIF value: 0

Reaction statistics:

Index Checked Element Threshold Type Checked Num Over-threshold Num

1 ICPIF - - -

2 MOS - - -

# Display the statistics for the path jitter operation.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

NO. : 1

Path 1:

Hop IP 192.168.40.210

Basic Results:

Send operation times: 10

Receive response times: 10

Min/Max/Average round trip time: 1/1/1

Square-Sum of round trip time: 10

Extended Results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

Path-Jitter Results:

Jitter number: 9

Min/Max/Average jitter: 0/0/0

Positive jitter number: 0

Min/Max/Average positive jitter: 0/0/0

Sum/Square-Sum positive jitter: 0/0

Negative jitter number: 0

Min/Max/Average negative jitter: 0/0/0

Sum/Square-Sum negative jitter: 0/0

Hop IP 192.168.50.209

Basic Results:

Send operation times: 10

Receive response times: 10

Min/Max/Average round trip time: 1/1/1

Square-Sum of round trip time: 10

Extended Results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

Path-Jitter Results:

Jitter number: 9

Min/Max/Average jitter: 0/0/0

Positive jitter number: 0

Min/Max/Average positive jitter: 0/0/0

Sum/Square-Sum positive jitter: 0/0

Negative jitter number: 0

Min/Max/Average negative jitter: 0/0/0

Sum/Square-Sum negative jitter: 0/0

Table 6 Command output

Field	Description
No.	Statistics group ID.
Start time	Time when the operation started.
Life time	Duration of the operation in seconds.
Send operation times	Number of probe packets sent.
Receive response times	Number of response packets received.
Min/Max/Average round trip time	Minimum/maximum/average round-trip time in milliseconds.
Square-Sum of round trip time	Square sum of round-trip time.
Packet loss ratio	Average packet loss ratio.
Failures due to timeout	Number of timeout occurrences in an operation.
Failures due to disconnect	Number of disconnections by the peer.
Failures due to no connection	Number of failures to connect with the peer.
Failures due to internal error	Number of failures due to internal errors.
Failures due to other errors	Failures due to other errors.
Packets out of sequence	Number of failures due to out-of-sequence packets.
Packets arrived late	Number of response packets received after a probe times out.
UDP-jitter results	UDP jitter operation results. This field is available only for the UDP jitter operation.
Voice results	Voice operation results. This field is available only for the voice operation.
RTT number	Number of response packets received.
Min positive SD	Minimum positive jitter from source to destination.
Min positive DS	Minimum positive jitter from destination to source.
Max positive SD	Maximum positive jitter from source to destination.
Max positive DS	Maximum positive jitter from destination to source.
Positive SD number	Number of positive jitters from source to destination.
Positive DS number	Number of positive jitters from destination to source.
Positive SD sum	Sum of positive jitters from source to destination.
Positive DS sum	Sum of positive jitters from destination to source.
Positive SD average	Average positive jitters from source to destination.
Positive DS average	Average positive jitters from destination to source.
Positive SD square-sum	Square sum of positive jitters from source to destination.
Positive DS square-sum	Square sum of positive jitters from destination to source.
Min negative SD	Minimum absolute value among negative jitters from source to destination.
Min negative DS	Minimum absolute value among negative jitters from destination to source.
Max negative SD	Maximum absolute value among negative jitters from source to destination.
Max negative DS	Maximum absolute value among negative jitters from destination to source.
Negative SD number	Number of negative jitters from source to destination.
Negative DS number	Number of negative jitters from destination to source.
Negative SD sum	Sum of absolute values of negative jitters from source to destination.
Negative DS sum	Sum of absolute values of negative jitters from destination to source.
Negative SD average	Average absolute value of negative jitters from source to destination.
Negative DS average	Average absolute value of negative jitters from destination to source.
Negative SD square-sum	Square sum of negative jitters from source to destination.
Negative DS square-sum	Square sum of negative jitters from destination to source.
One way results	Unidirectional delay result. This field is available only for the UDP jitter and voice operations.
Max SD delay	Maximum delay from source to destination.
Max DS delay	Maximum delay from destination to source.
Min SD delay	Minimum delay from source to destination.
Min DS delay	Minimum delay from destination to source.
Number of SD delay	Number of delays from source to destination.
Number of DS delay	Number of delays from destination to source.
Sum of SD delay	Sum of delays from source to destination.
Sum of DS delay	Sum of delays from destination to source.
Square-Sum of SD delay	Square sum of delays from source to destination.
Square-Sum of DS delay	Square sum of delays from destination to source.
SD lost packets	Number of lost packets from the source to the destination.
DS lost packets	Number of lost packets from the destination to the source.
Lost packets for unknown reason	Number of lost packets for unknown reasons.
Voice scores	Voice parameters. This field is available only for the voice operation.
Max MOS value	Maximum MOS value.
Min MOS value	Minimum MOS value.
Max ICPIF value	Maximum ICPIF value.
Min ICPIF value	Minimum ICPIF value.
Reaction statistics	Statistics about the reaction entry in the counting interval.
Index	ID of a reaction entry.
Checked Element	Monitored element.
Threshold Type	Threshold type.
Checked Num	Number of targets that have been monitored for data collection.
Over-threshold Num	Number of threshold violations.
Path	Serial number for the path in the path jitter operation. This field is available only for the path jitter operation.
Hop IP	IP address of the hop. This field is available only for the path jitter operation.
Path-jitter results	Path jitter operation results. This field is available only for the path jitter operation.
Jitter number	Number of jitters. This field is available only for the path jitter operation.
Min/Max/Average jitter	Minimum/maximum/average positive jitter in milliseconds. This field is available only for the path jitter operation.
Positive jitter number	Number of positive jitters. This field is available only for the path jitter operation.
Min/Max/Average positive jitter	Minimum/maximum/average positive jitter in milliseconds. This field is available only for the path jitter operation.
Sum/Square-Sum positive jitter	Sum/square sum of positive jitters. This field is available only for the path jitter operation.
Negative jitter number	Number of negative jitters. This field is available only for the path jitter operation.
Min/Max/Average negative jitter	Minimum/maximum/average negative jitter in milliseconds. This field is available only for the path jitter operation.
Sum/Square-Sum negative jitter	Sum/square sum of negative jitters. This field is available only for the path jitter operation.

Table 7 Description of the threshold monitoring fields

Monitored performance metric	Threshold type	Collect data in	Checked Num	Over-threshold Num
probe-duration	accumulate	Probes in the counting interval.	Number of completed probes.	Number of probes of which the duration exceeds the threshold.
	average	N/A	N/A	N/A
	consecutive	Probes in the counting interval.	Number of completed probes.	Number of probes of which the duration exceeds the threshold.
probe-fail	accumulate	Probes in the counting interval.	Number of completed probes.	Number of probe failures.
probe-fail	consecutive	Probes in the counting interval.	Number of completed probes.	Number of probe failures.
RTT	accumulate	Packets sent in the counting interval.	Number of sent packets.	Number of packets of which the round-trip time exceeds the threshold.
RTT	average	N/A	N/A	N/A
jitter-DS/jitter-SD	accumulate	Packets sent in the counting interval.	Number of sent packets.	Number of packets of which the one-way jitter exceeds the threshold.
jitter-DS/jitter-SD	average	N/A	N/A	N/A
OWD-DS/OWD-SD	N/A	Packets sent in the counting interval.	Number of sent packets.	Number of packets of which the one-way delay exceeds the threshold.
packet-loss	accumulate	Packets sent in the counting interval.	Number of sent packets.	Number of packet loss.
ICPIF	N/A	N/A	N/A	N/A
MOS	N/A	N/A	N/A	N/A

Related commands

statistics interval

expect data

Use expect data to configure the expected data.

Use undo expect data to restore the default.

Syntax

expect data expression [ offset number ]

undo expect data

Default

No expected data is configured.

Views

HTTP template view, TCP template view, UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

expression: Specifies the expected data, a case-sensitive string of 1 to 200 characters.

offset number: Specifies the offset in bytes after which the NQA client looks up the received packet's payload for the expected data. The value range for the number argument is 0 to 1000, and the default value is 0.

Usage guidelines

Upon receiving a response packet, the NQA client looks up the packet's payload for the expected data.

· If a match is found, the NQA client verifies the NQA destination device as legal.

· If no match is found, the NQA client verifies the NQA destination device as illegal.

The first five bytes of the UDP packet payload identify the probe packet type. The start byte of the offset is the sixth byte of the UDP payload.

Expected data check takes place in the following conditions:

· For features that use the HTTP template, the NQA client checks for the expected data if the HTTP response contains the Content-Length header.

· For features that use the TCP or UDP template, the NQA client checks for the expected data if the data-fill command is configured.

Examples

# In HTTP template view, configure the expected data as welcome!.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] expect data welcome!

expect ip

Use expect ip to specify the expected IP address.

Use undo expect ip to remove all expected IP addresses.

Syntax

expect ip ip-address

undo expect ip

Default

No expected IP address is configured.

Views

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the expected IP address for a DNS echo request.

Usage guidelines

During a DNS operation, the NQA client compares the expected IP address with the IP address resolved by the DNS server. If they are the same, it considers the DNS server legal.

Examples

# In DNS template view, configure the expected IP address as 1.1.1.1.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] expect ip 1.1.1.1

expect ipv6

Use expect ipv6 to specify the expected IPv6 address.

Use undo expect ipv6 to remove all expected IPv6 addresses.

Syntax

expect ipv6 ipv6-address

undo expect ipv6

Default

No expected IPv6 address is configured.

Views

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the expected IPv6 address for a DNS echo request.

Usage guidelines

During a DNS operation, the NQA client compares the expected IPv6 address with the IPv6 address resolved by the DNS server. If they are the same, it considers the DNS server legal.

Examples

# In DNS template view, configure the expected IPv6 address as 1::1.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] expect ipv6 1::1

expect status

Use expect status to configure the expected status code.

Use undo expect status to restore the default.

Syntax

expect status status-list

undo expect status [ status-list ]

Default

No expected status code is configured.

Views

HTTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

status-list: Specifies a space-separated list of up to 10 status code items. Each item specifies a status code or a range of status codes in the form of status-num 1 to status-num 2. The value ranges for both the status-num 1 and status-num 2 arguments are 0 to 999. The value for the status-num 2 argument must be equal to or greater than the value for the status-num 1 argument.

Usage guidelines

The status code of the HTTP packet is a three-digit field in decimal notation and it includes the status information for the HTTP server. The first digit defines the class of response, and the last two digits do not have any categorization role.

Examples

# In HTTP template view, configure the expected status codes 200, 300, and 400 to 500.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] expect status 200 300 400 to 500

filename

Use filename to specify a file to be transferred between the FTP server and the FTP client.

Use undo filename to restore the default.

Syntax

filename filename

undo filename

Default

No file is specified.

Views

FTP operation view, FTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

filename: Specifies the name of a file, a case-sensitive string of 1 to 200 characters that cannot contain slashes (/).

Examples

# Specify the file to be transferred between the FTP server and the FTP client as config.txt.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] filename config.txt

# In FTP template view, specify the file to be transferred between the FTP server and the FTP client as config.txt.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] filename config.txt

frequency

Use frequency to specify the interval at which the NQA operation repeats.

Use undo frequency to restore the default.

Syntax

frequency interval

undo frequency

Default

In NQA operation view, the interval between two consecutive voice or path jitter operations is 60000 milliseconds. The interval between two consecutive operations of other types is 0 milliseconds. Only one operation is performed.

In NQA template view, the interval between two consecutive operations is 5000 milliseconds.

Views

Any NQA operation view, any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies the interval between two consecutive operations, in the range of 0 to 604800000 milliseconds. An interval of 0 milliseconds sets NQA to perform the operation only once, and not to generate any statistics.

Usage guidelines

If an operation is not completed when the interval is reached, the next operation does not start.

Examples

# Configure the ICMP echo operation to repeat every 1000 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] frequency 1000

# In DNS template view, configure the DNS operation to repeat every 1000 milliseconds.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] frequency 1000

history-record enable

Use history-record enable to enable the saving of history records for the NQA operation.

Use undo history-record enable to disable the saving of history records.

Syntax

history-record enable

undo history-record enable

Default

The saving of history records is enabled only for the UDP tracert operation.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

To display the history records of the NQA operation, use the display nqa history command.

The undo form of the command also removes existing history records of an NQA operation.

Examples

# Enable the saving of history records for the NQA operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] history-record enable

Related commands

display nqa history

history-record keep-time

Use history-record keep-time to set the lifetime of history records for an NQA operation.

Use undo history-record keep-time to restore the default.

Syntax

history-record keep-time keep-time

undo history-record keep-time

Default

The history records of an NQA operation are kept for 120 minutes.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

keep-time: Specifies how long the history records can be saved. The value is in the range of 1 to 1440 minutes.

Usage guidelines

When an NQA operation completes, the timer starts. All records are removed when the lifetime is reached.

Examples

# Set the lifetime of the history records for an NQA operation to 100 minutes.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] history-record keep-time 100

history-record number

Use history-record number to set the maximum number of history records that can be saved for an NQA operation.

Use undo history-record number to restore the default.

Syntax

history-record number number

undo history-record number

Default

A maximum of 50 records can be saved for an NQA operation.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

number: Specifies the maximum number of history records that can be saved for an NQA operation. The value range is 0 to 50.

Usage guidelines

If the number of history records for an NQA operation exceeds the maximum number, earliest history records are removed.

Examples

# Set the maximum number of history records to 10 for an NQA operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] history-record number 10

init-ttl

Use init-ttl to set the TTL value for UDP packets in the start round of the UDP tracert operation.

Use undo init-ttl to restore the default.

Syntax

init-ttl value

undo init-ttl

Default

The NQA client sends a UDP packet with the TTL value 1 to start the UDP tracert operation.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the TTL value in the range of 1 to 255.

Examples

# Set the TTL value to 5 for the UDP packets in the start round.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] init-ttl 5

lsr-path

Use lsr-path to set a loose source routing (LSR) path.

Use undo lsr-path to restore the default.

Syntax

lsr-path ip-address&<1-8>

undo lsr-path

Default

No LSR path is configured.

Views

Path jitter operation view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address&<1-8>: Specifies a space-separated list of up to eight IP addresses. Each IP address represents a hop on the path.

Usage guidelines

The path jitter operation first uses tracert to detect each hop to the destination. It then sends ICMP echo requests to measure the delay and jitters from the source to each node. If multiple routes exist between the source and destination, the operation uses the path specified by using lsr-path command.

Examples

# Specify 10.1.1.20 and 10.1.2.10 as the hops on the LSR path for the path jitter operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type path-jitter

[Sysname-nqa-admin-test- path-jitter] lsr-path 10.1.1.20 10.1.2.10

max-failure

Use max-failure to set the maximum number of consecutive probe failures in a UDP tracert operation.

Use undo max-failure to restore the default.

Syntax

max-failure value

undo max-failure

Default

A UDP tracert operation stops and fails when it detects five consecutive probe failures.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the maximum number in the range of 0 to 255. If you set this argument to 0 or 255, the UDP tracert operation does not stop upon consecutive probe failures.

Usage guidelines

When a UDP tracert operation detects the maximum number of consecutive probe failures, the operation fails and stops probing the path.

Examples

# Set the maximum number of consecutive probe failures to 20 in a UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] max-failure 20

mode

Use mode to set the data transmission mode for the FTP operation.

Use undo mode to restore the default.

Syntax

mode { active | passive }

undo mode

Default

The FTP operation uses the data transmission mode active.

Views

FTP operation view, FTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

active: Sets the data transmission mode to active. The FTP server initiates a connection request.

passive: Sets the data transmission mode to passive. The FTP client initiates a connection request.

Examples

# Set the data transmission mode to passive for the FTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] mode passive

# In FTP template view, set the data transmission mode to passive for the FTP operation.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] mode passive

next-hop

Use next-hop to specify the next hop for the ICMP echo operation.

Use undo next-hop to remove the next hop IP address.

Syntax

next-hop ip-address

undo next-hop

Default

No next hop IP address is configured for the ICMP echo operation.

Views

ICMP echo operation view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the IP address of the next hop.

Examples

# Specify the next hop IP address as 10.1.1.1 for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1

no-fragment enable

Use no-fragment enable to enable the no-fragmentation feature.

Use undo no-fragment enable to restore the default.

Syntax

no-fragment enable

undo no-fragment enable

Default

The no-fragmentation feature is disabled.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

The no-fragmentation feature sets the DF field to 1. Packets with the DF field set cannot be fragmented during the forwarding process.

You can use this command to test the path MTU of a link.

Examples

# Enable the no-fragmentation feature for the UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] no-fragment enable

nqa

Use nqa to create an NQA operation and enter its view.

Use undo nqa to remove the operation.

Syntax

nqa entry admin-name operation-tag

undo nqa { all | entry admin-name operation-tag }

Default

No NQA operation is created.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

all: Removes all NQA operations.

Usage guidelines

If the operation type has been configured for the operation, the command directly places you to NQA operation view.

Examples

# Create an NQA operation with administrator name admin and operation tag test, and enter NQA operation view.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test]

nqa agent enable

Use nqa agent enable to enable the NQA client.

Use undo nqa agent enable to disable the NQA client and stop all operations being performed.

Syntax

nqa agent enable

undo nqa agent enable

Default

The NQA client is enabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Examples

# Enable the NQA client.

<Sysname> system-view

[Sysname] nqa agent enable

Related commands

nqa server enable

nqa schedule

Use nqa schedule to configure scheduling parameters for an NQA operation.

Use undo nqa schedule to stop the operation.

Syntax

nqa schedule admin-name operation-tag start-time { hh:mm:ss [ yyyy/mm/dd | mm/dd/yyyy ] | now } lifetime { lifetime | forever } [ recurring ]

undo nqa schedule admin-name operation-tag

Default

No schedule is configured for an NQA operation.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

start-time: Specifies the start time and date of the NQA operation.

hh:mm:ss: Specifies the start time of an NQA operation.

yyyy/mm/dd: Specifies the start date of an NQA operation. The default value is the current system time, and the value for the yyyy argument is in the range of 2000 to 2035.

mm/dd/yyyy: Specifies the start date of an NQA operation. The default value is the current system time, and the value for the yyyy argument is in the range of 2000 to 2035.

now: Starts the operation immediately.

lifetime: Specifies the duration of an operation.

lifetime: Specifies the duration of an operation in seconds, in the range of 1 to 2147483647.

forever: Performs the operation until you stop it by using the undo nqa schedule command.

recurring: Runs the operation automatically at the start time and for the specified duration.

Usage guidelines

You cannot enter the operation view or operation type view of a scheduled NQA operation.

Specify a lifetime long enough for an operation to complete.

Examples

# Schedule the operation with the administrator name admin and operation tag test to start on 08:08:08 2008/08/08 and last 1000 seconds.

<Sysname> system-view

[Sysname] nqa schedule admin test start-time 08:08:08 2008/08/08 lifetime 1000 recurring

Related commands

· destination ip

· nqa entry

· type

nqa template

Use nqa template to create an NQA template and enter its view.

Use undo nqa template to remove the NQA template.

Syntax

nqa template { dns | ftp | http | icmp | tcp | udp } name

undo nqa template { dns | ftp | http | icmp | tcp | udp } name

Default

No NQA template is created.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

dns: Specifies the DNS template.

ftp: Specifies the FTP template.

http: Specifies the HTTP template.

icmp: Specifies the ICMP template.

tcp: Specifies the TCP template.

udp: Specifies the UDP template.

name: Specifies the name of the NQA template, a case-insensitive string of 1 to 32 characters.

Examples

# Create an ICMP template named icmptplt, and enter its view.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt]

operation (FTP operation view)

Use operation to specify the operation type for the FTP operation.

Use undo operation to restore the default.

Syntax

operation { get | put }

undo operation

Default

The FTP operation type is get.

Views

FTP operation view, FTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

get: Gets a file from the FTP server.

put: Transfers a file to the FTP server.

Usage guidelines

When you perform the put operation with the filename command configured, make sure the file exists on the NQA client.

If you get a file from the FTP server, make sure the file specified in the URL exists on the FTP server. The NQA client does not save the file obtained from the FTP server.

Use a small file for the FTP operation. A big file might result in transfer failure because of timeout, or might affect other services for occupying much network bandwidth.

Examples

# Specify the operation type as put for the FTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] operation put

# In FTP template view, specify the operation type as put for the FTP operation.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] operation put

operation (HTTP operation view)

Use operation to specify the operation type for the HTTP operation.

Use undo operation to restore the default.

Syntax

operation { get | post | raw }

undo operation

Default

The HTTP operation type is get.

Views

HTTP operation view, HTTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

get: Gets data from the HTTP server.

post: Transfers data to the HTTP server.

raw: Sends the HTTP request specified by the raw-request command to the HTTP server.

Usage guidelines

For the HTTP get or post operation, the content in the HTTP request is obtained from the URL specified by the URL command.

For the HTTP raw operation, the content in the HTTP request is specified by the raw-request command.

Examples

# Specify the operation type as raw for the HTTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] operation raw

# In HTTP template view, specify the operation type as raw for the HTTP operation.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] operation raw

out interface

Use out interface to specify the output interface for probe packets.

Use undo out interface to restore the default.

Syntax

out interface interface-type interface-number

undo out interface

Default

The output interface for probe packets is not specified. The NQA client determines the output interface based on the routing table lookup.

Views

DHCP operation view, ICMP echo operation view, UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

Usage guidelines

For successful operation, the specified output interface must be up.

If the next-hop command is configured for an ICMP echo operation, the out interface command does not take effect.

Examples

# Specify GigabitEthernet 3/0/1 as the output interface for probe packets in the UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] out interface gigabitethernet 3/0/1

password

Use password to specify the FTP or HTTP login password.

Use undo password to remove the configuration.

Syntax

password { cipher | simple } password

undo password

Default

No FTP or HTTP login password is configured.

Views

FTP/HTTP operation view

FTP/HTTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

cipher: Sets a ciphertext password.

simple: Sets a plaintext password.

password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be a string of 1 to 32 characters. If cipher is specified, it must be a string of 1 to 73 characters.

Usage guidelines

For security purposes, all passwords, including passwords configured in plain text, are saved in ciphertext.

Examples

# Set the FTP login password to ftpuser.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] password simple ftpuser

# Set the FTP login password to ftpuser in FTP template view.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] password simple ftpuser

Related commands

· operation

· username

probe count

Use probe count to specify the probe times.

Use undo probe count to restore the default.

Syntax

probe count times

undo probe count

Default

In an UDP tracert operation, the NQA client performs three probes to each hop along the path.

In other types of operations, the NQA client performs one probe to the destination per operation.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

UDP jitter operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

times: Specifies the probe times.

· For the UDP tracert operation, this argument specifies the times of probes to each hop along the path. The value range for this argument is 1 to 10.

· For other types of operations, this argument specifies the times of probes to the destination per operation. The value range for this argument is 1 to 15.

Usage guidelines

The following describes how NQA performs different types of operations:

· A TCP or DLSw operation sets up a connection.

· A UDP jitter or voice operation sends a number of probe packets. The number of probe packets is set by using the probe packet-number command.

· An FTP operation uploads or downloads a file.

· An HTTP operation gets a Web page.

· A DHCP operation gets an IP address through DHCP.

· A DNS operation translates a domain name to an IP address.

· An ICMP echo sends an ICMP echo request.

· A UDP echo operation sends a UDP packet.

· An SNMP operation sends one SNMPv1 packet, one SNMPv2c packet, and one SNMPv3 packet.

· A path jitter operation is accomplished in the following steps:

a. The operation uses tracert to obtain the path from the NQA client to the destination. A maximum of 64 hops can be detected.

b. The NQA client sends ICMP echo requests to each hop along the path. The number of ICMP echo requests is set by using the probe packet-number command.

· A UDP tracert operation determines the routing path from the source to the destination. The number of probes to each hop is set by using the probe count command.

If an operation is to perform multiple probes, the NQA client starts a new probe in one of the following conditions:

· The NQA client receives responses to packets sent in the last probe.

· The probe timeout time expires.

This command is not available for the voice and path jitter operations. Each of these operations performs only one probe.

Examples

# Configure the ICMP echo operation to perform 10 probes.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] probe count 10

probe packet-interval

Use probe packet-interval to configure the interval for sending packets in the probe.

Use undo probe packet-interval to restore the default.

Syntax

probe packet-interval packet-interval

undo probe packet-interval

Default

The interval is 20 milliseconds.

Views

Path jitter operation view, UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

packet-interval: Specifies the interval for sending packets, in the range of 10 to 60000 milliseconds.

Examples

# Configure the UDP jitter operation to send packets every 100 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] probe packet-interval 100

probe packet-number

Use probe packet-number to configure the number of packets to be sent in a UDP jitter, path jitter, or voice probe.

Use undo probe packet-number to restore the default.

Syntax

probe packet-number packet-number

undo probe packet-number

Default

A UDP jitter or path jitter probe sends 10 packets and a voice probe sends 1000 packets.

Views

Path jitter operation view, UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

packet-number: Specifies the number of packets to be sent per probe. Available value ranges include:

· 10 to 1000 for the UDP jitter or path jitter operation.

· 10 to 60000 for the voice operation.

Examples

# Configure the UDP jitter probe to send 100 packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100

probe packet-timeout

Use probe packet-timeout to configure the timeout time for waiting for a response in the UDP jitter, path jitter, or voice operation.

Use undo probe packet-timeout to restore the default.

Syntax

probe packet-timeout packet-timeout

undo probe packet-timeout

Default

The response timeout time in the UDP jitter or path jitter operation is 3000 milliseconds.

The response timeout time in the voice operation is 5000 milliseconds.

Views

Path jitter operation view, UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

packet-timeout: Specifies the timeout time in milliseconds for waiting for a response in the UDP jitter, path jitter, or voice operation. The value is in the range of 10 to 3600000.

Examples

# Configure the timeout time for waiting for a response as 100 milliseconds in the UDP jitter operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100

probe timeout

Use probe timeout to specify the probe timeout time.

Use undo probe timeout to restore the default.

Syntax

probe timeout timeout

undo probe timeout

Default

The timeout time of a probe is 3000 milliseconds.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

UDP tracert operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

timeout: Specifies the probe timeout time in milliseconds. Available value ranges include:

· 10 to 86400000 for the FTP or HTTP operation.

· 10 to 3600000 for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, UDP echo, or UDP tracert operation.

Usage guidelines

If a probe does not complete within the period, the probe is timed out.

Examples

# Set the probe timeout time for the DHCP operation to 10000 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type dhcp

[Sysname-nqa-admin-test-dhcp] probe timeout 10000

# In HTTP template view, set the probe timeout time for the HTTP operation to 10000 milliseconds.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] probe timeout 10000

raw-request

Use raw-request to enter raw-request view and specify the content of an HTTP request.

Use undo raw-request to delete the content of an HTTP request.

Syntax

raw-request

undo raw-request

Default

No contents are specified.

Views

HTTP operation view, HTTP template view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

This command places you in raw request view and deletes the content of the previously configured GET request.

Examples

# Enter raw request view and specify the content of a request for the HTTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] raw-request

[Sysname-nqa-admin-test-http-raw-request]

# In HTTP template view, enter raw request view and specify the content of a request for the HTTP operation.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] raw-request

[Sysname-nqatplt-http-httptplt-raw-request]

reaction checked-element { jitter-ds | jitter-sd }

Use reaction checked-element { jitter-ds | jitter-sd } to configure a reaction entry for monitoring one-way jitter in the NQA operation.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element { jitter-ds | jitter-sd } threshold-type { accumulate accumulate-occurrences | average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring one-way jitter is configured.

Views

UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

jitter-ds: Specifies the destination-to-source jitter of each probe packet as the monitored element (or performance metric).

jitter-sd: Specifies source-to-destination jitter of each probe packet as the monitored element.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of threshold violations in the operation. The value is in the range of 1 to 14999 for the UDP jitter operation, and 1 to 59999 for the voice operation.

average: Checks the average one-way jitter.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

Examples

# Create reaction entry 1 for monitoring the average destination-to-source jitter of UDP jitter packets, and set the upper limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the average destination-to-source jitter is checked against the threshold range. If it exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element jitter-ds threshold-type average threshold-value 50 5 action-type trap-only

# Create reaction entry 2 for monitoring the destination-to-source jitter of UDP jitter probe packets, and set the upper limit to 50 milliseconds, and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the destination-to-source jitter is checked against the threshold range. If the total number of threshold violations reaches or exceeds 100, the state of the entry is set to over-threshold. Otherwise, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 2 checked-element jitter-ds threshold-type accumulate 100 threshold-value 50 5 action-type trap-only

reaction checked-element { owd-ds | owd-sd }

Use reaction checked-element { owd-ds | owd-sd } to configure a reaction entry for monitoring the one-way delay.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element { owd-ds | owd-sd } threshold-value upper-threshold lower-threshold

undo reaction item-number

Default

No reaction entry for monitoring the one-way delay is configured.

Views

UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

owd-ds: Specifies the destination-to-source delay of each probe packet as the monitored element.

owd-sd: Specifies the source-to-destination delay of each probe packet as the monitored element.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper limit.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

No actions can be configured for a reaction entry of monitoring one-way delays. To display the monitoring results and statistics, use the display nqa reaction counters and display nqa statistics commands.

Examples

# Create reaction entry 1 for monitoring the destination-to-source delay of every UDP jitter packet, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. The destination-to-source delay is calculated after the response to the probe packet arrives. If the delay exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element owd-ds threshold-value 50 5

reaction checked-element icpif

Use reaction checked-element icpif to configure a reaction entry for monitoring the ICPIF value in the voice operation.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element icpif threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring ICPIF values is configured.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-value: Specifies threshold range.

upper-threshold: Specifies the upper limit in the range of 1 to 100.

lower-threshold: Specifies the lower limit in the range of 1 to 100. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1 for monitoring the ICPIF value in the voice operation, and set the upper limit to 50 and lower limit to 5. Before the voice operation starts, the initial state of the reaction entry is invalid. After the operation, the ICPIF value is checked against the threshold range. If it exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] reaction 1 checked-element icpif threshold-value 50 5 action-type trap-only

reaction checked-element mos

Use reaction checked-element mos to configure a reaction entry for monitoring the MOS value in the voice operation.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element mos threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring the MOS value is configured.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-value: Specifies threshold range.

upper-threshold: Specifies the upper limit in the range of 1 to 500.

lower-threshold: Specifies the lower limit in the range of 1 to 500. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

For the MOS threshold, the number is expressed in three digits representing ones, tenths, and hundredths. For example, to express a MOS threshold of 1, enter 100.

Examples

# Create reaction entry 1 for monitoring the MOS value of the voice operation, and set the upper limit to 2 and lower limit to 1. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the MOS value is checked against the threshold range. If it exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] reaction 1 checked-element mos threshold-value 200 100 action-type trap-only

reaction checked-element packet-loss

Use reaction checked-element packet-loss to configure a reaction entry for monitoring packet loss in UDP jitter or voice operation.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element packet-loss threshold-type accumulate accumulate-occurrences [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring packet loss is configured.

Views

UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Specifies the total number of lost packets in the operation. The value is in the range of 1 to 15000 for the UDP jitter operation and 1 to 60000 for the voice operation.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1 for monitoring packet loss in the UDP jitter operation. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the total number of the lost packets is checked against the threshold. If the number reaches or exceeds 100, the state of the reaction entry is set to over-threshold. Otherwise, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element packet-loss threshold-type accumulate 100 action-type trap-only

reaction checked-element probe-duration

Use reaction checked-element probe-duration to configure a reaction entry for monitoring the probe duration.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element probe-duration threshold-type { accumulate accumulate-occurrences | average | consecutive consecutive-occurrences } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring the probe duration is configured.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of threshold violations. The value is in the range of 1 to 15.

average: Checks the average probe duration.

consecutive consecutive-occurrences: Specifies the number of consecutive threshold violations after the NQA operation starts. The value is in the range of 1 to 16.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper threshold.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS. This keyword is not available for the DNS operation.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

Examples

# Create reaction entry 1 for monitoring the average probe duration of ICMP echo operation, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the average probe duration is checked. If it exceeds the upper limit, the state is set to over-threshold. If it is below the lower limit, the state of the reaction entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-duration threshold-type average threshold-value 50 5 action-type trap-only

# Create reaction entry 2 for monitoring the probe duration of ICMP echo operation, and set the upper limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the accumulated probe duration is checked against the threshold range. If the total number of threshold violations reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the lower threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 2 checked-element probe-duration threshold-type accumulate 10 threshold-value 50 5 action-type trap-only

# Create reaction entry 3 for monitoring the probe duration time of ICMP echo operation, and set the upper limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the consecutive probe duration is checked against the threshold range. If the total number of consecutive threshold violations reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the lower threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 3 checked-element probe-duration threshold-type consecutive 10 threshold-value 50 5 action-type trap-only

reaction checked-element probe-fail (for trap)

Use reaction checked-element probe-fail to configure a reaction entry for monitoring the probe failures of the operation.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element probe-fail threshold-type { accumulate accumulate-occurrences | consecutive consecutive-occurrences } [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring probe failures is configured.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of probe failures. The value is in the range of 1 to 15.

consecutive consecutive-occurrences: Checks the maximum number of consecutive probe failures. The value is in the range of 1 to 16.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS. This keyword is not available for the DNS operation.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1 for monitoring the probe failures in ICMP echo operation. Before the NQA operation starts, the initial state of the reaction entry is invalid. If the total number of probe failures reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-fail threshold-type accumulate 10 action-type trap-only

# Create reaction entry 2 for monitoring the probe failures in ICMP echo operation. Before the NQA operation starts, the initial state of the reaction entry is invalid. If the number of consecutive probe failures reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 2 checked-element probe-fail threshold-type consecutive 10 action-type trap-only

reaction checked-element probe-fail (for trigger)

Use reaction checked-element probe-fail to configure a reaction entry for monitoring probe failures.

Use undo reaction to remove the specified reaction entry.

Syntax

reaction item-number checked-element probe-fail threshold-type consecutive consecutive-occurrences action-type trigger-only

undo reaction item-number

Default

No reaction entry for monitoring probe failures is configured.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view

ICMP/UDP echo operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

consecutive consecutive-occurrences: Checks the maximum number of consecutive probe failures, in the range of 1 to 16.

action-type: Specifies what action to be triggered.

trigger-only: Triggers other modules to react to certain conditions.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is triggered.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type tcp

[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type consecutive 3 action-type trigger-only

Related commands

Track (High Availability Command Reference)

reaction checked-element rtt

Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip time.

Use undo reaction to delete the specified reaction entry.

Syntax

reaction item-number checked-element rtt threshold-type { accumulate accumulate-occurrences | average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entry for monitoring packet round-trip time is configured.

Views

UDP jitter operation view, voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of threshold violations. Available value ranges include:

· 1 to 15000 for the UDP jitter operation.

· 1 to 60000 for the voice operation.

average: Checks the packet average round-trip time.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

Examples

# Create reaction entry 1 for monitoring the average round-trip time of UDP jitter probe packets, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the average packet round-trip time is checked. If it exceeds the upper limit, the state is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the reaction entry state changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element rtt threshold-type average threshold-value 50 5 action-type trap-only

# Create reaction entry 2 for monitoring the round-trip time of UDP jitter probe packets, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the packet round-trip time is checked. If the total number of threshold violations reaches or exceeds 100, the state of the entry is set to over-threshold. Otherwise, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element rtt threshold-type accumulate 100 threshold-value 50 5 action-type trap-only

reaction trap

Use reaction trap to configure the sending of traps to the NMS under specific conditions.

Use undo reaction trap to restore the default.

Syntax

reaction trap { path-change | probe-failure consecutive-probe-failures | test-complete | test-failure [ cumulate-probe-failures ] }

undo reaction trap { path-change | probe-failure | test-complete | test-failure }

Default

No traps are sent to the NMS.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

UDP jitter operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

path-change: Sends a trap when the NQA client detects a path different than the last UDP tracert operation. This keyword is available only for the UDP tracert operation.

probe-failure consecutive-probe-failures: Sends a trap to the NMS if the number of consecutive probe failures in an operation is greater than or equal to consecutive-probe-failures. The value range for the consecutive-probe-failures argument is 1 to 15. The system counts the number of consecutive probe failures for each operation, so multiple traps might be sent.

test-complete: Sends a trap to indicate that the operation is completed.

test-failure: Sends a trap when an operation fails. For operations other than UDP tracert operation, the system counts the total number of probe failures in an operation. If the number reaches or exceeds the value for the cumulate-probe-failures argument, a trap is sent for the operation failure.

cumulate-probe-failures: Specifies the total number of probe failures in an operation. The value range for the cumulate-probe-failures argument is 1 to 15. This argument is not supported by the UDP tracert operation.

Usage guidelines

The UDP jitter and voice operations support only the test-complete keyword.

The UDP tracert operation supports the path-change, test-complete, and test-failure keywords.

Examples

# Configure the system to send a trap if five or more consecutive probe failures occur in an ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction trap probe-failure 5

reaction trigger probe-fail

Use reaction trigger probe-fail to configure the number of consecutive probe failures that lead to an operation failure.

Use undo reaction trigger probe-fail to restore the default.

Syntax

reaction trigger probe-fail count

undo reaction trigger probe-fail

Default

When the number of consecutive probe failures reaches 3, the operation fails.

Views

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

count: Specifies the number of consecutive probe failures, in the range of 1 to 15.

Usage guidelines

If the operation fails, the NQA client notifies the feature that uses the NQA template of the operation failure.

Examples

# In HTTP template view, if the number of consecutive probe failures reaches 5, the operation fails.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] reaction trigger probe-fail 5

reaction trigger probe-pass

Use reaction trigger probe-pass to configure the number of consecutive successful probes that lead to a successful operation.

Use undo reaction trigger probe-fail to restore the default.

Syntax

reaction trigger probe-pass count

undo reaction trigger probe-pass

Default

When the number of consecutive successful probes reaches 3, the operation succeeds.

Views

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

count: Specifies the number of consecutive successful probes, in the range of 1 to 15.

Usage guidelines

If the operation succeeds, the NQA client notifies the feature that uses the template of the successful operation event.

Examples

# In HTTP template view, if the number of consecutive successful probes reaches 5, the operation succeeds.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] reaction trigger probe-pass 5

resolve-target

Use resolve-target to set the domain name for the DNS operation.

Use undo resolve-target to restore the default.

Syntax

resolve-target domain-name

undo resolve-target

Default

No domain name is configured.

Views

DNS operation view, DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

domain-name: Specifies the domain name to be resolved. It is a dot-separated case-sensitive string of 1 to 255 characters including letters, digits, hyphens (-), and underscores (_) (for example, aabbcc.com). Each part consists of 1 to 63 characters, and consecutive dots (.) are not allowed.

Examples

# Set the domain name domain1 to be resolved.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type dns

[Sysname-nqa-admin-test-dns] resolve-target domain1

# In DNS template view, set the domain name domain1 to be resolved.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] resolve-target domain1

resolve-type

Use resolve-type to configure the domain name resolution type.

Use undo resolve-type to restore the default.

Syntax

resolve-type { A | AAAA }

undo resolve-type

Default

The domain name resolution type is type A.

Views

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

A: Specifies the type A queries. A type A query resolves a domain name to a mapped IPv4 address.

AAAA: Specifies the type AAAA queries. A type AAAA query resolves a domain name to a mapped IPv6 address.

Examples

# In DNS template view, configure the domain name resolution type as AAAA.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] resolve-type AAAA

route-option bypass-route

Use route-option bypass-route to enable the routing table bypass function to test the connectivity to the direct destination.

Use undo route-option bypass-route to disable the routing table bypass function.

Syntax

route-option bypass-route

undo route-option bypass-route

Default

The routing table bypass function is disabled.

Views

DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

UDP jitter operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

When the routing table bypass function is enabled, the following events occur:

· The routing table is not searched. Packets are sent directly to the destination in a directly connected network.

· The TTL value in the probe packet is set to 1. The TTL set in the ttl command does not take effect.

Examples

# Enable the routing table bypass function.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] route-option bypass-route

source interface

Use source interface to specify the IP address of the specified interface as the source IP address of probe packets.

Use undo source interface to restore the default.

Syntax

source interface interface-type interface-number

undo source interface

Default

No source IP address is specified for probe packets. The probe packets take the primary IP address of the outgoing interface as their source IP address.

Views

ICMP echo operation view, UDP tracert operation view, ICMP template view

Predefined user roles

network-admin

mdc-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

Usage guidelines

If you configure the source interface command with the source ip or source ipv6 command, the most recent configuration takes effect.

The specified source interface must be up. Otherwise, no probe requests can be sent out.

Examples

# Specify the IP address of interface VLAN-interface 2 as the source IP address of ICMP echo request packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] source interface vlan-interface 2

# In ICMP template view, specify the IP address of interface VLAN-interface 2 as the source IP address of ICMP echo request packets.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] source interface vlan-interface 2

Related commands

source ip

Use source ip to configure the source IP address for probe packets.

Use undo source ip to remove the configured source address. The IP address of the interface that sends a probe packet is the source IP address of the probe packet.

Syntax

source ip ip-address

undo source ip

Default

No source IP address is configured for probe packets.

Views

DHCP/DLSw/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

Path/UDP jitter operation view

UDP tracert operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the source IP address for probe packets.

Usage guidelines

If you configure both the source interface and source ip commands for an ICMP echo or UDP tracert operation, the most recent configuration takes effect.

The specified source IP address must be the IP address of a local interface, and the local interface must be up. Otherwise, no probe packets can be sent out.

For an NQA template, if the source and destination addresses have different IP versions, the source address does not take effect.

Examples

# Configure the source IP address as 10.1.1.1 for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] source ip 10.1.1.1

# In ICMP template view, configure the source IP address as 10.1.1.1 for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] source ip 10.1.1.1

Related commands

source interface

source ipv6

Use source ipv6 to configure the source IPv6 address for probe packets.

Use undo source ipv6 to remove the configured source IPv6 address. The IPv6 address of the interface that sends a probe packet is the source IPv6 address of the probe packet.

Syntax

source ipv6 ipv6-address

undo source ipv6

Default

No source IPv6 address is configured for probe packets.

Views

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address: Specifies the source IPv6 address for probe packets. IPv6 link-local addresses are not supported.

Usage guidelines

If you configure both the source interface and source ipv6 commands for an ICMP echo operation, the most recent configuration takes effect.

The specified source IPv6 address must be the IPv6 address of a local interface. The local interface must be up. Otherwise, no probe packets can be sent out.

For an NQA template, if the source and destination addresses have different IP versions, the source address does not take effect.

Examples

# In ICMP template view, configure the source IPv6 address as 1::1 for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] source ipv6 1::1

Related commands

source interface

source port

Use source port to configure the source port for probe packets.

Use undo source port to remove the configured source port number.

Syntax

source port port-number

undo source port

Default

No source port number is configured for probe packets.

Views

SNMP/voice operation view

UDP echo operation view

UDP jitter operation view

UDP tracert operation view

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

port-number: Specifies the source port number in the range of 1 to 65535.

Examples

# Configure port 8000 as the source port for probe packets in the UDP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-echo

[Sysname-nqa-admin-test-udp-echo] source port 8000

# In DNS template view, configure port 8000 as the source port for probe packets in the DNS operation.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] source port 8000

statistics hold-time

Use statistics hold-time to configure the hold time of statistics groups for an NQA operation.

Use undo statistics hold-time to restore the default.

Syntax

statistics hold-time hold-time

undo statistics hold-time

Default

The hold time of statistics groups is 120 minutes.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

Path/UDP jitter operation view

Predefined user roles

network-admin

mdc-admin

Parameters

hold-time: Specifies the hold time in minutes, in the range of 1 to 1440.

Usage guidelines

A statistics group is deleted when its hold time expires.

Examples

# Configure the hold time of statistics groups as 3 minutes.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3

statistics interval

Use statistics interval to configure the interval for collecting statistics for an NQA operation.

Use undo statistics interval to restore the default.

Syntax

statistics interval interval

undo statistics interval

Default

The interval is 60 minutes.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

Path/UDP jitter operation view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies the interval in minutes, in the range of 1 to 35791394.

Usage guidelines

NQA forms statistics within the same collection interval as a statistics group. To display information about the statistics groups, use the display nqa statistics command.

Examples

# Configure the system to collect the ICMP echo operation statistics at 2-minute intervals.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] statistics interval 2

statistics max-group

Use statistics max-group to configure the maximum number of statistics groups that can be saved.

Use undo statistics max-group to restore the default.

Syntax

statistics max-group number

undo statistics max-group

Default

A maximum of two statistics groups can be saved.

Views

DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

Path/UDP jitter operation view

Predefined user roles

network-admin

mdc-admin

Parameters

number: Specifies the maximum number of statistics groups, in the range of 0 to 100. To disable statistics collection, set the value to 0.

Usage guidelines

When the maximum number of statistics groups is reached and a new statistics group is to be saved, the earliest statistics group is deleted.

Examples

# Configure the NQA to save up to five statistics groups for the ICMP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] statistics max-group 5

target-only

Use target-only to perform the path jitter operation only on the destination address.

Use undo target-only to restore the default.

Syntax

target-only

undo target-only

Default

NQA performs the path jitter operation to the destination hop by hop.

Views

Path jitter operation view

Predefined user roles

network-admin

mdc-admin

Examples

# Perform the path jitter operation only on the destination address.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type path-jitter

[Sysname-nqa-admin-test-path-jitter] target-only

tos

Use tos to set the ToS value in the IP header for probe packets.

Use undo tos to restore the default.

Syntax

tos value

undo tos

Default

The ToS value in the IP header of probe packets is 0.

Views

Any operation view, any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the ToS value in the range of 0 to 255.

Examples

# Set the ToS value to 1 in the IP header for probe packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] tos 1

# In ICMP template view, set the ToS value to 1 in the IP header for probe packets.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] tos 1

ttl

Use ttl to specify the maximum number of hops that the probe packets can traverse.

Use undo ttl to restore the default.

Syntax

ttl value

undo ttl

Default

The maximum number of hops is 30 for probe packets of the UDP tracert operation, and is 20 for probe packets of other types of operations.

Views

DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view

ICMP/UDP echo operation view

UDP jitter operation view

UDP tracert operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the maximum number of hops that the probe packets can traverse, in the range of 1 to 255.

Usage guidelines

The route-option bypass-route command sets the TTL to 1 for probe packets. The ttl command does not take effect.

For a successful UDP tracert operation, make sure the maximum number of hops is not smaller than the value set in the init-ttl command.

Examples

# Set the maximum number of hops to 16 for probe packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] ttl 16

# In ICMP template view, set the maximum number of hops to 16 for probe packets.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] ttl 16

type

Use type to specify the operation type of the NQA operation and enter operation type view.

Syntax

type { dhcp | dlsw | dns | ftp | http | icmp-echo | path-jitter | snmp | tcp | udp-echo | udp-jitter | udp-tracert | voice }

Default

No operation type is specified.

Views

NQA operation view

Predefined user roles

network-admin

mdc-admin

Parameters

dhcp: Specifies the DHCP operation type.

dlsw: Specifies the DLSw operation type.

dns: Specifies the DNS operation type.

ftp: Specifies the FTP operation type.

http: Specifies the HTTP operation type.

icmp-echo: Specifies the ICMP echo operation type.

path-jitter: Specifies the path jitter operation type.

snmp: Specifies the SNMP operation type.

tcp: Specifies the TCP operation type.

udp-echo: Specifies the UDP echo operation type.

udp-jitter: Specifies the UDP jitter operation type.

udp-tracert: Specifies the UDP tracert operation type.

voice: Specifies the voice operation type.

Examples

# Specify the type of FTP operation and enter FTP operation view.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp]

url

Use url to specify the URL of the destination HTTP or FTP server.

Use undo url to remove the URL.

Syntax

url url

undo url

Default

No URL is configured for the destination server.

Views

FTP/HTTP operation view

FTP/HTTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

url: Specifies the URL of the destination server, a case-sensitive string of 1 to 255 characters. Spaces and question marks (?) are not allowed. The following table describes the URL format and parameters for different operations.

Operation	URL format	Parameter description
HTTP operation	http://host/resource http://host:port/resource	The host parameter represents a dot-separated case-sensitive string of 1 to 255 characters including letters, digits, hyphens (-), and underscores (_), aabbcc.com for example. Each part consists of 1 to 63 characters, and consecutive dots (.) are not allowed. For description about the filename parameter, see Fundamentals Configuration Guide.
FTP operation	ftp://host/filename ftp://host:port/filename

Operation

URL format

Parameter description

HTTP operation

http://host/resource

http://host:port/resource

The host parameter represents a dot-separated case-sensitive string of 1 to 255 characters including letters, digits, hyphens (-), and underscores (_), aabbcc.com for example. Each part consists of 1 to 63 characters, and consecutive dots (.) are not allowed.

For description about the filename parameter, see Fundamentals Configuration Guide.

FTP operation

ftp://host/filename

ftp://host:port/filename

Examples

# Configure the URL that the HTTP operation visits as http://www.company.com/index.htm.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] url http://www.company.com/index.html

# In HTTP template view, configure the URL that the HTTP operation visits as http://www.company.com/index.htm.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] url http://www.company.com/index.html

username

Use username to specify an FTP or HTTP login username.

Use undo username to remove the configuration.

Syntax

username username

undo username

Default

No FTP or HTTP login username is configured.

Views

FTP/HTTP operation view

FTP/HTTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

username: Specifies the username, a case-sensitive string of 1 to 32 characters.

Examples

# Set the FTP login username to administrator.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] username administrator

# Set the FTP login username to administrator in FTP template view.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] username administrator

Related commands

· operation

· password

version

Use version to specify the HTTP version used in the HTTP operation.

Use undo version to restore the default.

Syntax

version { v1.0 | v1.1 }

undo version

Default

HTTP 1.0 is used in the HTTP operation.

Views

HTTP operation view

Predefined user roles

network-admin

mdc-admin

Parameters

v1.0: Uses HTTP version 1.0.

v1.1: Uses HTTP version 1.1.

Examples

# Configure the HTTP operation to use the HTTP version 1.1.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] version v1.1

vpn-instance

Use vpn-instance to apply the operation to a VPN.

Use undo vpn-instance to restore the default.

Syntax

vpn-instance vpn-instance-name

undo vpn-instance

Default

The operation applies to the public network.

Views

Any operation view, any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

vpn-instance-name: Specifies the name of an MPLS L3VPN instance, a case-sensitive string of 1 to 31 characters.

Usage guidelines

After you specify the VPN, the NQA operation tests the connectivity in the specified VPN.

Examples

# Apply the ICMP echo operation to vpn1.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1

# In FTP template view, apply the FTP operation to vpn1.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] vpn-instance vpn1

NQA server commands

IMPORTANT:

Configure the NQA server only for UDP jitter, TCP, UDP echo, and voice operations.

display nqa server

Use display nqa server status to display NQA server status.

Syntax

display nqa server

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Examples

# Display NQA server status.

<Sysname> display nqa server

NQA server status: Enabled

TCP connect:

IP Address Port Tos VPN instance

1.1.1.1 2 0 -

UDP echo:

IP Address Port Tos VPN instance

2.2.2.2 3 10 vpn1

Table 8 Command output

Field	Description
TCP connect	Information about the TCP listening service on the NQA server.
UDP echo	Information about the UDP listening service on the NQA server.
IP Address	IP address specified for the TCP/UDP listening service on the NQA server.
Port	Port number specified for the TCP/UDP listening service on the NQA server.
Tos	ToS value in reply packets sent by the NQA server.
VPN instance	Name of the VPN instance to which the IP address that the NQA server listens on belongs. This field displays a hyphen (-) if the NQA server listens on a public IP address.

nqa server enable

Use nqa server enable to enable the NQA server.

Use undo nqa server enable to disable the NQA server.

Syntax

nqa server enable

undo nqa server enable

Default

The NQA server is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Examples

# Enable the NQA server.

<Sysname> system-view

[Sysname] nqa server enable

Related commands

· display nqa server

· nqa server tcp-connect

· nqa server udp-echo

nqa server tcp-connect

Use nqa server tcp-connect to configure a TCP listening service to enable the NQA server to listen and respond to the specified IP address and port.

Use undo nqa server tcp-connect to remove a TCP listening service.

Syntax

nqa server tcp-connect ip-address port-number [ vpn-instance vpn-instance-name ] [ tos tos ]

undo nqa server tcp-connect ip-address port-number

Default

No TCP listening service is configured on the NQA server.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the IP address for the TCP listening service.

port-number: Specifies the port number for the TCP listening service, in the range of 1 to 65535.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify this option, the NQA server listens on a public IP address.

tos tos: Specifies the ToS value in the IP header for reply packets. The value range for this argument is 0 to 255, and the default value is 0.

Usage guidelines

Use this command on the NQA server only for the TCP operation.

When you configure the IP address and port number for a TCP listening service on the NQA server, follow these restrictions and guidelines:

· The IP address and port number must be unique on the NQA server and match the configuration on the NQA client.

· The IP address must be the address of an interface on the NQA server.

· To ensure successful NQA operations and avoid affecting existing services, do not configure the TCP listening service on well-known ports from 1 to 1023.

Examples

# Configure a TCP listening service to enable the NQA server to listen and respond to the IP address 169.254.10.2 and port 9000.

<Sysname> system-view

[Sysname] nqa server tcp-connect 169.254.10.2 9000

Related commands

· display nqa server

· nqa server enable

nqa server udp-echo

Use nqa server udp-echo to configure a UDP listening service to enable the NQA server to listen and respond on the specified IP address and port.

Use undo nqa server udp-echo to remove the UDP listening service created.

Syntax

nqa server udp-echo ip-address port-number [ vpn-instance vpn-instance-name ] [ tos tos ]

undo nqa server udp-echo ip-address port-number

Default

No UDP listening service is configured on the NQA server.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the IP address for the UDP listening service.

port-number: Specifies the port number for the UDP listening service, in the range of 1 to 65535.

tos tos: Specifies the ToS value in the IP header for reply packets. The value range for this argument is 0 to 255, and the default value is 0.

Usage guidelines

Use this command on the NQA server only for the UDP jitter, UDP echo, and voice operations.

When you configure the IP address and port number for a UDP listening service on the NQA server, follow these restrictions and guidelines:

· The IP address and port number must be unique on the NQA server and match the configuration on the NQA client.

· The IP address must be the address of an interface on the NQA server.

· To ensure successful NQA operations and avoid affecting existing services, do not configure the UDP listening service on well-known ports from 1 to 1023.

Examples

# Configure a UDP listening service to enable the NQA server to listen and respond on the IP address 169.254.10.2 and port 9000.

<Sysname> system-view

[Sysname] nqa server udp-echo 169.254.10.2 9000

Related commands

· display nqa server

· nqa server enable

12-Network Management and Monitoring Command Reference

NQA commands

NQA client commands

display nqa history

display nqa reaction counters

expect data

nqa template

operation (FTP operation view)

reaction trigger probe-fail

statistics interval

target-only

tos

vpn-instance

nqa server udp-echo

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Service Business

News & Events

Contact Us