Temperature	Range
Operating temperature	· Long term: 0°C to 45°C (32°F to 113°F) · Short term: –10°C to +55°C (14°F to 131°F) (up to 96 hours of continuous operation within less than 15 days in one year)
Operating humidity (noncondensing)	5% to 95%
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating altitude	Available altitude: ≤ 4000 m (13123.36 ft) Certificated altitude: ≤ 3000 m (9842.52 ft)

Power consumption, weight, and dimensions

Switches

Table 1 Switch specifications

Switch model	Max. system input power consumption	Max. power consumption for cards and fans	Weight	Dimensions (H × W × D)	Height (RU)
S9505E	1690 W (AC) 1510 W (DC)	1435 W	Net weight: 40 kg (88.18 lb) Full configuration: ≤ 80 kg (176.37 lb)	486 × 442 × 450 mm (19.13 × 17.40 × 17.72 in)	11 RU
S9508E	2510 W (AC) 2250 W (DC)	2135 W	Net weight: 50 kg (110.23 lb) Full configuration: ≤ 100 kg (220.46 lb)	620 × 442 × 450 mm (24.41 × 17.40 × 17.72 in)	14 RU
S9508E-V	2530 W (AC) 2270 W (DC)	2150 W	Net weight: 58 kg (127.87 lb) Full configuration: ≤110 kg (242.50 lb)	975 × 436 × 451 mm (38.39 × 17.17 × 17.76 in)	22 RU
S9512E	3650 W (AC) 3270 W (DC)	3100 W	Net weight: 60 kg (132.28 lb) Full configuration: ≤ 120 kg (264.55 lb)	753 × 442 × 450 mm (29.65 × 17.40 × 17.72 in)	17 RU

Max. system input power consumption refers to the maximum input power consumption of the chassis when the chassis is fully configured with cards that have the maximum power consumption.

Max. power consumption for cards and fans refers to the maximum power consumption of all cards and fans that have the maximum power consumption in the fully configured chassis. For example, the max power consumption of cards and fans for the S9505E is the maximum power consumption of two LSR1SRP2D1 MPUs, five LSR1LN2BNL1 base cards, 10 LSR1DTCP8L1 subcards and one fan tray.

Net weight refers to the weight of the chassis (with filler panels installed), excluding fan trays, cards, and power supplies.

Full configuration refers to the maximum weight of the switch when all cards and power supplies are installed to the switch.

Rack Unit (RU) refers to the height of the chassis in the rack. 1 RU = 44.45 mm (1.75 in).

Cards

Table 2 Card specifications

Card model	Power consumption	Net weight	Dimensions (H × W × D)
LSR2GT24LEB1	40 W to 72 W	3.02 kg (6.66 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1GT24LEC1	44 W to 85 W	3.10 kg (6.83 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR2GT48LEB1	54 W to 115 W	3.22 kg (7.10 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1GT48LEC1	68 W to 125 W	3.15 kg (6.94 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR2GP24LEB1	33 W to 70 W	3.07 kg (6.77 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1GP24LEC1	43 W to 75 W	3.17 kg (6.99 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1GP48LEB1	43 W to 100 W	3.39 kg (7.47 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1GP48LEC1	63 W to 115 W	3.48 kg (7.67 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1GP48LEF1	65 W to 130 W	3.48 kg (7.67 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR2GV48REB1	52 W to 95 W	3.32 kg (7.32 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP2LEB1	36 W to 50 W	2.94 kg (6.48 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP2LEC1	46 W to 60 W	3.02 kg (6.66 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP4LEB1	52 W to 75 W	3.08 kg (6.79 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP4LEC1	78 W to 95 W	3.17 kg (6.99 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP4LEF1	80 W to 110 W	3.19 kg (7.03 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP16REB1	80 W to 135 W	3.32 kg (7.32 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1XP16REC1	88 W to 155 W	3.43 kg (7.56 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1SRP2B1	79 W to 95 W	3.41 kg (7.52 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1SRP2C1	88 W to 105 W	3.55 kg (7.83 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1SRP2B2	52 W to 65 W	3.14 kg (6.92 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1SRP2C2	62 W to 75 W	3.29 kg (7.25 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1SRP2D1	93 W to 110 W	3.65 kg (8.05 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1LN1BNL1	80 W to 95 W	3.31 kg (7.30 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1LN2BNL1	148 W to 165 W	4.25 kg (9.37 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1DRUP1L1	Maximum power consumption: 18 W	0.39 kg (0.86 lb)	18 × 165 × 142 mm (0.71 × 6.50 × 5.59 in)
LSR1DPUP1L1	Maximum power consumption: 18 W	0.37 kg (0.82 lb)	18 × 165 × 142 mm (0.71 × 6.50 × 5.59 in)
LSR1DRSP2L1	Maximum power consumption: 20 W	0.37 kg (0.82 lb)	18 × 165 × 142 mm (0.71 × 6.50 × 5.59 in)
LSR1DPSP4L1	Maximum power consumption: 20 W	0.33 kg (0.73 lb)	18 × 165 × 142 mm (0.71 × 6.50 × 5.59 in)
LSR1DTCP8L1	Maximum power consumption: 30 W	0.36 kg (0.79 lb)	18 × 165 × 142 mm (0.71 × 6.50 × 5.59 in)
LSR1WCM2A1	80 W to 105 W	3.52 kg (7.76 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1FW2A1	73 W to 105 W	3.52 kg (7.76 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1IPS1A1	73 W to 105 W	3.52 kg (7.76 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1NSM1A1	73 W to 105 W	3.52 kg (7.76 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1LB1A1	73 W to 105 W	3.52 kg (7.76 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)
LSR1ACG1A1	73 W to 105 W	3.52 kg (7.76 lb)	40 × 400 × 380 mm (1.57 × 15.75 × 14.96 in)

Fan trays

Table 3 Fan tray specifications

Fan tray	Power consumption	Net weight	Dimensions (H × W × D)
A single fan tray of S9505E/S9512E	12 W to 90 W	3.97 kg (8.75 lb)	299.5 × 95 × 412.7 mm (11.79 × 3.74 × 16.25 in)
A single fan tray of S9508E	16 W to 115 W	5.84 kg (12.87 lb)	454.7 × 95 × 412.7 mm (17.90 × 3.74 × 16.25 in)
A single fan tray of S9508E-V	16 W to 130 W	4.85 kg (10.69 lb)	64 × 403.2 × 405.4 mm (2.52 × 15.87 × 15.96 in)

NOTE:

The S9505E/S9512E and S9508E adopt the vertical fan tray slot. The S9508E-V adopts the horizontal fan tray slot.

Power supplies

Table 4 Power supply weight

Model	Description	Max. output power	Net weight
NEPS3500-A	3500 W AC power frame	3500 W (when two sub power supplies are installed)	3.90 kg (8.60 lb) (excluding sub power supplies)
NEPS1800-A	1800 W AC sub power supply	1200 W (100 VAC to 120 VAC) 1800 W (200 VAC to 240 VAC)	2.25 kg (4.96 lb)
NEPS2000-D	2000 W DC power supply	2000 W	6.36 kg (14.02 lb)
NEPS3500-D	3500 W DC power supply	3500 W	6.14 kg (13.54 lb)

Switch ordering guide

Model	Power supply	Card slot mode	MPU slots	LPU slots	Power supply slots	fan trays	Remarks
S9505E	AC/DC	Horizontal	2	5	2	1	H3C recommends configuring two MPUs and two power supplies for 1+1 redundancy.
S9508E	AC/DC	Horizontal	2	8	2	1
S9508E-V	AC/DC	Vertical	2	8	2	1
S9512E	AC/DC	Horizontal	2	12	2	2

NOTE:

The LPU slots are for Ethernet interface cards, base cards, and OAA cards. For card specifications, see "Card specifications and compatibility."

Card specifications and compatibility

Category	Card model	Description	Applicable S9500E chassis
MPUs	LSR1SRP2B1	N/A	S9508E, S9508E-V, and S9512E
	LSR1SRP2C1	N/A	S9508E, S9508E-V, and S9512E
	LSR1SRP2B2	N/A	S9505E
	LSR1SRP2C2	N/A	S9505E
	LSR1SRP2D1	N/A	All S9500E models
Ethernet interface cards	LSR2GT24LEB1	Standard 24-port 1000 Mbps copper Ethernet interface card	All S9500E models
	LSR1GT24LEC1	Enhanced 24-port 1000 Mbps copper Ethernet interface card	All S9500E models
	LSR2GT48LEB1	Standard 48-port 1000 Mbps copper Ethernet interface card	All S9500E models
	LSR1GT48LEC1	Enhanced 48-port 1000 Mbps copper Ethernet interface card	All S9500E models
	LSR2GP24LEB1	Standard 24-port 1000 Mbps fiber Ethernet interface card	All S9500E models
	LSR1GP24LEC1	Enhanced 24-port 1000 Mbps fiber Ethernet interface card	All S9500E models
	LSR1GP48LEB1	Standard 48-port 1000 Mbps fiber Ethernet interface card	All S9500E models
	LSR1GP48LEC1	Enhanced 48-port 1000 Mbps fiber Ethernet interface card	All S9500E models
	LSR1GP48LEF1	Advanced 48-port 1000 Mbps fiber Ethernet interface card	All S9500E models
	LSR2GV48REB1	Standard 48-port 1000 Mbps copper Ethernet interface card	All S9500E models
	LSR1XP2LEB1	Standard 2-port 10 Gbps fiber Ethernet interface card	All S9500E models
	LSR1XP2LEC1	Enhanced 2-port 10 Gbps fiber Ethernet interface card	All S9500E models
	LSR1XP4LEB1	Standard 4-port 10 Gbps fiber Ethernet interface card	All S9500E models
	LSR1XP4LEC1	Enhanced 4-port 10 Gbps fiber Ethernet interface card	All S9500E models
	LSR1XP4LEF1	Advanced 4-port 10 Gbps fiber Ethernet interface card	All S9500E models
	LSR1XP16REB1	Standard 16-port 10 Gbps fiber Ethernet interface card	All S9500E models
	LSR1XP16REC1	Enhanced 16-port 10 Gbps fiber Ethernet interface card	All S9500E models
Base cards	LSR1LN1BNL1	Single-line base card	All S9500E models
Base cards	LSR1LN2BNL1	Dual-line base card	All S9500E models
Subcards	LSR1DRUP1L1	1-port OC-192c/STM-64c RPR fiber interface card	All S9500E models
	LSR1DPUP1L1	1-port OC-192c/STM-64c POS fiber interface card	All S9500E models
	LSR1DRSP2L1	2-port OC-48c/STM-16c RPR fiber interface card	All S9500E models
	LSR1DPSP4L1	4-port OC-48c/STM-16c POS fiber interface card	All S9500E models
	LSR1DTCP8L1	8-port OC-3c/OC-12c POS fiber interface card	All S9500E models
OAA cards	LSR1FW2A1	Firewall card	All S9500E models
	LSR1IPS1A1	1000 Mbps IPS card	All S9500E models
	LSR1WCM2A1	Wireless controller module	All S9500E models
	LSR1NSM1A1	NetStream card	All S9500E models
	LSR1LB1A1	Load balancing (LB) card	All S9500E models
	LSR1ACG1A1	Application control gateway (ACG) card	All S9500E models

NOTE:

· You must install the subcards to the base cards before installing them to your switch.

· The LSR1GP48LEF1 and LST1XP4LEF1 are supported by Release B1323 or above. The LSR1XP16REC1 is supported by Release B1331 or above.

For more information about the S9500E card LEDs, see "Appendix B LEDs."

For more information about the S9500E cards, see the corresponding datasheet of the cards.

MPUs

Table 5 MPU specifications

Item	Specifications
Item	LSR1SRP2B1	LSR1SRP2C1	LSR1SRP2B2	LSR1SRP2C2	LSR1SRP2D1
CPU	MPC8548	MPC8548+MPC8544	MPC8548	MPC8548+MPC8544	MPC8548+MPC8544
Applicable switches	S9508E S9508E-V S9512E	S9508E S9508E-V S9512E	S9505E	S9505E	All S9500E series switches
Boot ROM	4 MB
Flash	128 MB
NVRAM	1 MB
SDRAM (DDR2)	1 GB (expandable to 2 GB)
CF card	256 MB (expandable to 512 MB or 1 GB)
Interfaces	· 1 console port · 1 AUX port · 1 network management port · 1 CF card slot · 2 USB ports · 4 SMB coaxial clock interface (supported only by LSR1SRP2D1)

Ethernet interface cards

Table 6 Ethernet interface card specifications

Model	Interface type and number	Supported interface modules
LSR2GT24LEB1	Sixteen 10/100/1000 Mbps auto-sensing RJ-45 copper ports and eight Combo interfaces	GE SFP module
LSR1GT24LEC1	Sixteen 10/100/1000 Mbps auto-sensing RJ-45 copper ports and eight Combo interfaces	GE SFP module
LSR2GT48LEB1	Forty-eight 10/100/1000 Mbps auto-sensing RJ-45 copper ports	N/A
LSR1GT48LEC1	Forty-eight 10/100/1000 Mbps auto-sensing RJ-45 copper ports	N/A
LSR2GP24LEB1	Sixteen 1000 Mbps SFP/LC fiber ports and eight Combo interfaces	GE SFP module
LSR1GP24LEC1	Sixteen 1000 Mbps SFP/LC fiber ports and eight Combo interfaces	GE SFP module
LSR1GP48LEB1	Forty-eight 1000 Mbps SFP/LC fiber ports	GE SFP module
LSR1GP48LEC1	Forty-eight 1000 Mbps SFP/LC fiber ports	GE SFP module
LSR1GP48LEF1	Forty-eight 1000 Mbps SFP/LC fiber ports	GE SFP module
LSR2GV48REB1	Forty-eight 10/100/1000 Mbps auto-sensing RJ-45 copper ports	N/A
LSR1XP2LEB1	Two 10-GE XFP fiber ports	10-GE XFP module
LSR1XP2LEC1	Two 10-GE XFP fiber ports	10-GE XFP module
LSR1XP4LEB1	Four 10-GE XFP fiber ports	10-GE XFP module
LSR1XP4LEC1	Four 10-GE XFP fiber ports	10-GE XFP module
LSR1XP4LEF1	Four 10-GE XFP fiber ports	10-GE XFP module
LSR1XP16REB1	Sixteen 10-GE SFP+ fiber ports	· 10-GE SFP+ module · 10-GE SFP+ cable
LSR1XP16REC1	Sixteen 10-GE SFP+ fiber ports	· 10-GE SFP+ module · 10-GE SFP+ cable

NOTE:

Each combo interface comprises a copper port and a fiber port. The two ports cannot work at the same time.

Base card s

A base card provides external interfaces and supports relevant software configurations only after a subcard is installed to it.

Table 7 Base card specifications

Model	Number of subcard slots	Supported subcards
LSR1LN1BNL1	1	· LSR1DRUP1L1 · LSR1DPUP1L1 · LSR1DPSP4L1 · LSR1DRSP2L1 · LSR1DTCP8L1
LSR1LN2BNL1	2

Model

Number of subcard slots

Supported subcards

LSR1LN1BNL1

· LSR1DRUP1L1

· LSR1DPUP1L1

· LSR1DPSP4L1

· LSR1DRSP2L1

· LSR1DTCP8L1

LSR1LN2BNL1

Subcard s

You can install the following subcards to the base card LSR1LN1BNL1 or LSR1LN2BNL1.

Table 8 Subcard specifications

Model	Interface type and number	Connector	Interface transmission rate	Supported transceiver modules
LSR1DPUP1L1	One OC-192c/STM-64c POS fiber port	XFP/LC	9953.28 Mbps	10G XFP module
LSR1DRUP1L1	One OC-192c/STM-64c RPR fiber port One mate copper port	XFP/LC	9953.28 Mbps	10G XFP module
LSR1DRSP2L1	Two OC-48c/STM-16c RPR fiber ports Two OC-48c/STM-16c SFP mate fiber ports	SFP/LC	2488.32 Mbps	2.5G SFP module
LSR1DPSP4L1	Four OC-48c/STM-16c POS fiber ports	SFP/LC	2488.32 Mbps	2.5G SFP module
LSR1DTCP8L1	Eight OC-3c/OC-12c POS/GE fiber ports	SFP/LC	155.52 Mbps 622.08 Mbps	155M POS SFP module 622M POS SFP module

NOTE:

The LSR1DTCP8L1 subcard supports two types of interface transmission rates. You can configure an interface rate as OC-3c (155.52 Mbps) or OC-12c (622.08 Mbps), and then select an SFP module supporting the same rate.

OAA cards

CAUTION:

The software upgrade of OAA cards must be performed though console ports or Ethernet ports on the OAA cards, rather than the MPU.

Table 9 OAA card specifications

Model	Interfaces	Supported interface modules
LST1FW2A1	· One console port · One CF card slot · Two USB ports · Two 10/100/1000 BASE-T copper ports · Two GE combo interfaces	GE SFP modules
LSR1IPS1A1	· One console port · One CF card slot · Two USB ports · Two 10/100/1000 BASE-T copper ports · Two GE combo interfaces	GE SFP modules
LSR1NSM1A1	· One console port · One CF card slot · Two USB ports · Two 10/100/1000 BASE-T copper ports · Two GE combo interfaces	GE SFP modules
LSR1LB1A1	· One console port · One CF card slot · Two USB ports · Two 10/100/1000 BASE-T copper ports · Two GE combo interfaces	GE SFP modules
LSR1ACG1A1	· One console port · One CF card slot · Two USB ports · Two 10/100/1000 BASE-T copper ports · Two GE combo interfaces	GE SFP modules
LSR1WCM2A1	· One console port · One 10/100/1000 BASE-T copper interface · Two USB ports	N/A

Power components

Select AC or DC power supplies according to the power supply mode of your switch.

· Make sure the maximum output power of the power supplies exceeds the system power consumption. H3C recommends reserving a certain power de-rating value. For the maximum output power of a single power supply, see Table 10.

· H3C recommends you to configure N+1 or N+M power supply redundancy.

· To use AC power supply, select the specific 16 A AC power cords. For the 16A AC power cords used in different countries or regions, see Table 11.

· An NEPS3500-A AC power frame can function properly only after you install one or two NEPS1800-A AC sub power supplies to it.

Table 10 Electrical parameters of power supplies

Model	Description	Rated input voltage range	Max. input voltage range	Max. input current	Max. output power
NEPS3500-A	3500 W AC power frame	N/A	N/A	N/A	3500 W (when installed with two AC sub power supplies)
NEPS1800-A	1800 W AC sub power supply	100 VAC to 120 VAC; 50 Hz or 60 Hz 200 VAC to 240 VAC; 50 Hz or 60 Hz	90 VAC to 264 VAC; 50 Hz or 60 Hz	20 A	1200 W (100 VAC to 120 VAC) 1800 W (200 VAC to 240 VAC)
NEPS2000-D	2000 W DC power supply	–48 VDC to –60 VDC	–40 VDC to –72 VDC	60 A	2000 W
NEPS3500-D	3500 W DC power supply	–48 VDC to –60 VDC	–40 VDC to –72 VDC	80 A	3500 W

Table 11 16A AC power cords used in different countries or regions

No.	Specifications
1	Connector type	Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	I type	04043396 (3 m, i.e., 9.8 ft)	Mainland China
	Connector outline		Power cord outline		Connector outline

2	Connector type	Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	B type	0404A063 (3 m, i.e., 9.8 ft)	Canada and U.S.A	Mexico, Argentina, Brazil, Columbia, Venezuela, Thailand, Peru, and Philippines
	Connector outline		Power cord outline		Connector outline

3	Connector type	Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	F type	0404A061 (3 m, i.e., 9.8 ft)	Holland, Denmark, Sweden, Finland, Norway, Germany, France, Austria, Belgium, and Italy	Indonesia, Turkey, Russia, and CIS
	Connector outline		Power cord outline		Connector outline

4	Connector type	Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	G type	0404A060 (3 m, i.e., 9.8 ft)	U.K.	Malaysia, Singapore, Hong Kong, and Egypt
	Connector outline		Power cord outline		Connector outline

5	Connector type	Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	B type	0404A062 (3 m, i.e., 9.8 ft)	Japan
	Connector outline		Power cord outline		Connector outline

6	Connector type	Code (Length)	Countries or regions where the type of power cords conforms to local safety regulations and can be used legally	Other countries or regions using this type of power cords	Countries or regions seldom using this type of power cords
	I type	0404A01A (3 m, i.e., 9.8 ft)	Australia
	Connector outline		Power cord outline		Connector outline