H3C S3610&S5510 Series Ethernet Switches

Operation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: 20081229-C-1.01

Product Version: Release 5303

H3C S3610&S5510 Series Ethernet Switches  Command Manual-Release 5303

It is used for assisting the users in using various commands.

H3C S3610 Series Ethernet Switches  Installation Manual

It provides information for the system installation.

H3C S5510 Series Ethernet Switches  Installation Manual

It provides information for the system installation.

0 Product Overview

Introduces the system features, service features, and network application of the switches.

1 Login

Introduces the ways to log into an Ethernet switch.

2 VLAN

Introduces VLAN, Voice VLAN, GVRP fundamental and the related configuration.

3 IP Addressing and Performance

Introduces IP address and IP performance fundamental and the related configuration.

4 QinQ-BPDU Tunneling

Introduces QinQ, BPDU Tunnel and the related configuration.

5 Port Correlation Configuration

Introduces basic port configuration and port isolation configuration.

6 Link Aggregation

Introduces link aggregation configuration, including manual link aggregation and static LACP link aggregation.

7 MAC Address Table Management

Introduces MAC address forwarding table and the related configuration.

8 IP Source Guard

Introduces IP Source Guard configuration.

9 MSTP

Introduces STP, BRDU tunnel and the related configurations.

10 IPv6

Introduces IPv6 basic configuration and application, IPv6 tunneling, and so on.

11 Routing Overview

Introduces the basic routing information and the classification of routing protocols

12 IPv4 Routing

Introduces IPv4 routing related configurations, such as static routing, RIP, OSPF, IS-IS, BGP, and route policy.

13 BFD-GR

Introduces BFD configuration and GR configuration

14 IPv6 Routing

Introduces IPv6 routing related configurations, such as static routing, RIPng, OSPFv3, IPv6 IS-IS, and IPv6 BGP.

15 Multicast Protocol

Introduces the multicast protocol-related configurations.

16 802.1x-HABP-MAC Authentication

Introduces 802.1x, HABP and MAC related configurations.

17 AAA-RADIUS-HWTACACS

Introduces AAA, RADIUS, HWTACACS, and the related configurations.

18 ARP

Introduces ARP and the related configuration.

19 DHCP

Introduces DHCP and the related configuration.

20 ACL

Introduces IPv4&IPv6-based ACL and the related configuration.

21 QoS

Introduces QoS and the related configuration.

22 Port Mirroring

Introduces port mirroring and the related configuration.

23 Cluster Management

Introduces cluster and the related configuration.

24 UDP Helper

Introduces UDP Helper and the related configuration.

25 SNMP-RMON

Introduces the configuration to manage network devices through SNMP and RMON.

26 NTP

Introduces NTP and the related configuration.

27 DNS

Introduces DNS and the related configuration.

28 File System Management

Introduces basic configuration for file system management.

29 Information Center

Introduces the configuration to analyze and diagnose networks using the information center.

30 System Maintaining and Debugging

Introduces daily system maintenance and debugging.

31 NQA

Introduces NQA and the related configuration.

32 VRRP

Introduces VRRP and the related configuration.

33 SSH

Introduces SSH and the related configurations.

34 MCE

Introduces MCE and the related configuration.

35 OAM

Introduces ethernet OAM configuration.

36 DLDP

Introduces DLDP and the related configuration.

37 RRPP

Introduces RRPP and the related configuration.

38 SSL-HTTPS

Introduces SSL and HTTPS configuration.

39 PKI

Introduces PKI and related configuration.

40 Appendix

Lists the acronyms used in this manual.

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

&<1-n>

The argument(s) before the ampersand (&) sign can be entered 1 to n times.

#

A line starting with the # sign is comments.

< >

Button names are inside angle brackets. For example, click <OK>.

[ ]

Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window.

/

Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.