Login

WelcomeuserNew H3C 退出

1. Have an accountLogin
2. Create an accountRegister

Country / Region

H3C Low-End Ethernet Switches Configuration Guide(V1.01)

Home

H3C S3600 Switch Series

Configure & Deploy

Configuration Examples

H3C Low-End Ethernet Switches Configuration Guide(V1.01)

Table of Contents

Related Documents

10-Port Binding Configuration Guide

Title	Size	Download
10-Port Binding Configuration Guide	27.9 KB

Table of Contents

1 Port Binding Configuration Guide· 1-1

Configuring a Port Binding· 1-1

Network Diagram·· 1-1

Networking and Configuration Requirements· 1-1

Applicable Product Matrix· 1-1

Configuration Procedure· 1-2

Complete Configuration· 1-2

1 Port Binding Configuration Guide

Configuring a Port Binding

Port binding allows the network administrator to bind the MAC and IP addresses of a user to a specific port. After the port binding operation, the switch forwards a packet received from the port only if the source MAC address and IP address carried in the packet have been bound to the port. This improves network security and enhances security monitoring.

Network Diagram

Figure 1-1 Network diagram for port binding configuration

Networking and Configuration Requirements

To prevent the IP address of Host A from being used by a malicious user, bind the MAC address and IP addresses of Host A to Ethernet 1/0/1 on Switch A.

Applicable Product Matrix

Product series	Software version	Hardware version
S5600 series	Release 1510, Release1602	All versions
S5100-SI/EI series	Release 2200, Release2201	All versions
S3600-SI/EI series	Release 1510, Release1602	All versions
S3100-EI series	Release 2104, Release 2107	All versions
S3100-52P	Release 1602	S3100-52P

Configuration Procedure

# Enter system view.

<SwitchA> system-view

# Enter Ethernet 1/0/1 port view.

[SwitchA] interface Ethernet1/0/1

# Bind the MAC address and the IP address of Host 1 to Ethernet 1/0/1.

[SwitchA-Ethernet1/0/1] am user-bind mac-addr 0001-0002-0003 ip-addr 10.12.1.1

Complete Configuration

#

interface Ethernet1/0/1

am user-bind mac-addr 0001-0002-0003 ip-addr 10.12.1.1

#