H3C S5500-SI Series Ethernet Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08191K-20070515-C-1.03

Product Version: Release 1205

H3C S5500-SI Series Ethernet Switches  Installation Manual

It provides information for the system installation.

H3C S5500-SI Series Ethernet Switches  Operation Manual

It is used for assisting the users in data configurations and typical applications.

1 Login

Introduces the commands used for logging into an Ethernet switch.

2 Basic System Configuration and Maintenance

Introduces the commands used for daily system maintenance and debugging.

3 File System Management

Introduces the commands used for file system management.

4 VLAN

Introduces the commands used for configuring VLAN.

5 QinQ-BPDU TUNNEL

Introduces the commands used for configuring QinQ.

6 Port Correlation Configuration

Introduces the commands used for configuring link aggregation and port isolation.

7 MAC Address Table Management

Introduces the commands used for configuring MAC address forwarding table.

8 MSTP

Introduces the commands used for configuring MSTP.

9 IP Address and Performance

Introduces the commands used for configuring IP address and IP performance.

10 IPv6 Configuration

Introduces the commands used for configuring IPv6 application.

11 Routing Overview

Introduces the commands of Routing Overview.

12 IPv4 Routing

Introduces the commands used for configuring IPv4 routing, static routing, RIP, and route policy.

13 IPv6 Routing

Introduces IPv6 routing related configurations, such as static routing, RIPng, and route policy.

Introduces the commands used for configuring IPv6 routing, static routing, RIPng, and route policy.

14 802.1x-HABP-MAC Authentication

Introduces the commands used for 802.1x, HABP and MAC related configurations.

15 AAA-RADIUS-HWTACACS

Introduces the commands used for AAA, RADIUS, HWTACACS, and the related configurations.

16 Multicast Protocol

Introduces the commands used for configuring IGMP Snooping.

17 ARP

Introduces the commands used for configuring ARP.

18 DHCP

Introduces the commands used for DHCP and the related configuration.

19 ACL

Introduces the commands used for configuring ACL.

20 QoS

Introduces the commands used for configuring QoS.

21 Port Mirroring

Introduces the commands used for configuring port mirroring.

22 Cluster

Introduces the commands used for configuring cluster.

23 SNMP-RMON

Introduces the commands used for the configuration to manage network devices through SNMP and RMON.

24 NTP

Introduces the commands used for configuring NTP.

25 DNS

Introduces the commands used for configuring DNS.

26 Information Center

Introduces the commands used for the configuration to analyze and diagnose networks using the information center.

27 NQA

Introduces the commands used for configuring NQA.

28 SSH Terminal Service

Introduces the commands used for configuring SSH2.0.

29 UDP Helper

Introduces the commands used for UDP Helper and the related configuration.

30 SSL-HTTPS

Introduces the commands used for configuring SSL and HTTPS.

31 PKI

Introduces the commands used for configuring PKI.

32 PoE-PoE Profile

Introduces the commands used for configuring PoE and PoE profile.

33 Appendix A Command Index

Lists all the commands in this command manual, which are arranged alphabetically.

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

#

A line starting with the # sign is comments.

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.