H3C S3100-52P Ethernet Switch Installation Manual(V1.01)

HomeSupportResource CenterSwitchesH3C S3100 Switch SeriesH3C S3100 Switch SeriesTechnical DocumentsInstall & UpgradeInstallation GuidesH3C S3100-52P Ethernet Switch Installation Manual(V1.01)
00-1Cover
Title Size Download
00-1Cover 303 KB

 

 

 

 

H3C S3100-52P Ethernet Switch

Installation Manual

 

 

 

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

 

 

Manual Version: T2-08048P-20070410-C-1.01

 


 

Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors

 

All Rights Reserved

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www. h3c.com

Technical Support

service@h3c.com

http://www. h3c.com


About This Manual

Related Documentation

In addition to this manual, each H3C S3100-52P Ethernet Switch documentation set includes the following:

Manual

Description

H3C S3100-52P Ethernet Switch Operation Manual

It is used for assisting the users in device configuration and typical applications.

H3C S3100-52P Ethernet Switch Command Manual

It is used for assisting the users in using various commands.

 

Organization

H3C S3100-52P Ethernet Switch Installation Manual is organized as follows:

Chapter

Contents

1 Product Overview

Introduces the characteristics and technical specifications of S3100-52P Ethernet Switches.

2 Preparing for Installation

Introduces the installation preparation and precaution of S3100-52P Ethernet Switches.

3 Installing the Switch

Introduces the procedures to install an S3100-52P Ethernet Switch, including the setup of the mainframe, cards, power supply, and cables.

4 Starting up the Switch at the Initial Boot

Introduces the booting process of an S3100-52P Ethernet Switch, including the power-on booting of the switch and the system initialization.

5 Loading Boot ROM and Host Software

Introduces the ways to load BootROM and host software for an S3100-52P Ethernet Switch.

6 Maintenance and Troubleshooting

Introduces the problems that might occur during the installation and the booting of an S3100-52P Ethernet Switch and the corresponding solutions.

Appendix Lightning Protection of the Switch

Introduces lightning protection of an S3100-52P Ethernet Switch.

 

Conventions

The manual uses the following conventions:

I. GUI conventions

Convention

Description

< >

Button names are inside angle brackets. For example, click <OK>.

[ ]

Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window.

/

Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

 

II. Symbols

Convention

Description

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.

 

Environmental Protection

This product has been designed to comply with the requirements on environmental protection. For the proper storage, use and disposal of this product, national laws and regulations must be observed.