Fundamentals Command Reference

Covers the commands for logging in to and setting up the switch. This command reference includes:

·     CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Device management

·     Tcl

·     Python

·     License management

IRF Command Reference

Covers the commands for configuring IRF features.

Interface Command Reference

Covers the commands for configuring interfaces. This command reference includes:

·     Bulk interface configuration

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. You can use these commands to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, customer network packets transparent to the service provider network, remark VLAN tags, and so on. This command reference includes:

·     MAC address table and MAC Information

·     Ethernet link aggregation

·     DRNI

·     Port isolation

·     VLAN

·     MVRP

·     QinQ

·     VLAN mapping

·     Loop detection

·     Spanning tree

·     LLDP

·     L2PT

·     Service loopback group

Layer 3—IP Services Command Reference

Covers the commands for configuring IP services features. You can use these command to configure IP addressing, IP performance optimization, ARP, DNS, UDP helper, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP

·     IP addressing

·     DHCP

·     DNS and DDNS

·     mDNS relay

·     IP forwarding basics load sharing

·     Fast forwarding

·     Adjacency table

·     IRDP

·     IP performance optimization

·     UDP helper

·     Basic IPv6 settings

·     DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

·     HTTP redirect

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 policy-based routing

·     Routing policy

IP Multicast Command Reference

Covers the commands for Layer 2 and Layer 3 multicast protocols. This command reference includes:

·     IGMP snooping

·     PIM snooping

·     Multicast VLAN

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     Multicast VPN

·     MLD snooping

·     IPv6 PIM snooping

·     IPv6 multicast VLAN

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

MPLS Command Reference

Covers the commands for configuring MPLS features, including basic MPLS, LDP, MPLS TE, and MPLS label-based L2VPN and L3VPN. This command reference includes:

·     Basic MPLS

·     Static LSP

·     LDP

·     MPLS TE

·     Static CRLSP

·     RSVP

·     Tunnel policy

·     MPLS L3VPN and IPv6 MPLS L3VPN

·     MPLS L2VPN

·     VPLS

·     MPLS OAM

·     MCE

Segment Routing Command Reference

Covers the commands for configuring MPLS SR.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS

·     Data buffer

·     Time range

Security Command Reference

Covers security feature commands. Available security features include identity authentication, access security, secure management, and attack protection. This command reference includes:

·     AAA

·     802.1X

·     MAC authentication

·     Portal authentication

·     Web authentication

·     Port security

·     User profile

·     Password control

·     Keychain

·     Public key management

·     PKI

·     IPsec, IKE, and IKEv2

·     SSH

·     SSL

·     Object group

·     Attack detection and prevention

·     TCP attack prevention

·     IP source guard

·     ARP attack protection

·     ND attack defense

·     uRPF

·     SAVI

·     MFF

·     Crypto engine

·     FIPS

·     Microsegmentation

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Ethernet OAM

·     CFD

·     DLDP

·     RRPP

·     ERPS

·     Smart Link

·     Monitor Link

·     VRRP

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     NQA

·     iNQA

·     NTP and SNTP

·     PTP

·     SNMP

·     RMON

·     Event MIB

·     NETCONF

·     CWMP

·     Process monitoring and maintenance

·     Sampler

·     Mirroring (including both port and flow mirroring).

·     sFlow

·     Information center

·     Packet capture

·     VCF fabric

·     Service quality analysis (SQA)

·     eMDI

·     Cloud connection

Telemetry Command Reference

Covers the commands for configuring Telemetry. This command reference includes gRPC and INT.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

VXLAN Command Reference

Covers the commands for configuring VXLAN.

EVPN Command Reference

Covers the commands for configuring EVPN. This command reference includes:

·     EVPN

·     MVXLAN