H3C SecPath F5000 firewalls

F5020/F5040

Centralized IRF devices. These devices support IRF.

H3C SecPath M9000 multiservice security gateways

M9006/M9010/M9014

Distributed devices. These devices support IRF. They can operate in one of the following modes:

·     Standalone mode—The device cannot form an IRF fabric with other devices.

·     IRF mode—The device can form an IRF fabric with other devices.

H3C SecPath virtual multiservice security gateways

VFW1000

Centralized devices. These devices do not support IRF.

Fundamentals Command Reference

Covers the commands for logging in to and setting up a device. This command reference includes:

·     CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Device management

·     Security zone

·     Tcl configuration

·     Python

·     License management

Virtual Technologies Command Reference

Covers the commands for configuring virtual technologies. This command reference includes:

·     IRF

·     Context

Interface Command Reference

Covers the commands for configuring various interfaces. This command reference includes:

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

·     Blade interface

·     Bulk interfaces

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table

·     Ethernet link aggregation

·     Spanning tree

·     VLAN

·     VLAN termination

·     LLDP

·     Layer 2 forwarding

Layer 2—WAN Accessing Command Reference

Covers the commands for configuring WAN access technologies. This command reference includes:

·     PPP

·     L2TP

Layer 3—IP Services Command Reference

Covers the commands related to IP addressing, IP performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP (including proxy ARP)

·     IP addressing

·     DHCP

·     DNS

·     NAT

·     IP forwarding basics

·     Fast forwarding

·     Flow classification

·     Adjacency table

·     IP performance optimization

·     IPv6 basics

·     DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     IP routing basics

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 IS-IS

·     IPv6 policy-based routing

·     Routing policy

IP Multicast Command Reference

Covers the commands for Layer 3 multicast protocols IGMP, MLD, PIM, IPv6 PIM, and MSDP. This command reference includes:

·     Multicast overview

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

ACL and QoS Command Reference

Covers the commands for configuring ACL and QoS to classify and control traffic. This command reference includes:

·     ACL

·     Time range

·     QoS (including QoS fundamentals, QoS configuration, traffic monitoring, traffic redirecting, and traffic accounting)

Security Command Reference

Covers security feature commands for identity authentication, access security, secure management, and attack protection. This command reference includes:

·     AAA

·     Portal

·     Password control

·     Public keys

·     PKI

·     IPsec

·     SSH

·     SSL

·     ASPF

·     APR

·     Session management

·     Connection limit

·     Object group

·     Object policy

·     Attack detection and prevention

·     ARP attack protection

·     uRPF

·     Crypto engine

·     FIPS

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     VRRP

·     Failover group

·     Reth interface and redundancy group

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·     System maintenance and debugging

·     NQA

·     NTP

·     SNMP

·     RMON

·     NETCONF

·     EAA

·     Process monitoring and maintaining

·     Information center

·     Flow log

·     Mirroring

VPN Instance and MCE Command Reference

Covers the commands related to VPN instance and Multi-VPN-Instance CE (MCE) configuration. This command reference includes:

·     VPN instance

·     MCE

Probe Command Reference

Covers commands used in probe view.