- Released At: 13-06-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C SecPath firewall series command references
Applicable hardware and software versions
The following matrix shows the hardware and software versions to which the command references are applicable:
Series | Device model | Software version |
F1000-X-G3 series | F1000-A-G3, F1000-C-G3, F1000-E-G3, F1000-S-G3 | E8601 |
F100-X-G3 series | F100-A-G3, F100-E-G3 | E9345 |
F100-C-G3, F100-M-G3, F100-S-G3 | E9536 | |
F1000-X-VG series | F1000-E-VG | E9345 |
F1000-S-VG | E9536 | |
F1000-X-G2 series | F1000-A-G2, F1000-C-G2, F1000-E-G2, F1000-S-G2 | E9345 |
F100-X-G2 series | F100-A-G2, F100-E-G2 | E9345 |
F100-C-G2, F100-M-G2, F100-S-G2 | E9536 | |
F1000-C-EI[F100-A-SI][F100-X-EI] series | F1000-C-EI, F100-A-EI, F100-A-SI, F100-C-EI | E9345 |
F100-E-EI | E9536 | |
F100-WiNet series | F100-A80-WiNet | E9345 |
F100-C80-WiNet, F100-C60-WiNet, F100-C50-WiNet, F100-S80-WiNet | E9536 | |
F1000-C81X0 series | F1000-C8180, F1000-C8170, F1000-C8160 | E9345 |
F1000-C8150, F1000-C8130, F1000-C8120, F1000-C8110 | E9536 | |
F100-C-A series | F100-C-A3, F100-C-A5, F100-C-A6 | E9536 |
F100-C-A-W series | F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W | E9602 |
F1000-C-HI[F100-X-HI] series | F1000-C-HI, F100-A-HI | E9345 |
F100-C-HI, F100-S-HI | E9536 | |
F1000-9X0-AI series | F1000-990-AI, F1000-980-AI, F1000-970-AI, F1000-960-AI, F1000-950-AI, F1000-930-AI, F1000-920-AI | E9345 |
SecBlade IV NGFW modules | LSPM6FWD8 | E8535 |
LSQM2FWDSC8 | E8520 |
Contents
Table 1 lists features included in each command reference. Support for the features depends on the device model.
Table 1 Command reference content
Command reference | Content |
Fundamentals Command Reference | Covers the commands for using the CLI and logging in to and setting up a firewall. This command reference includes: · CLI (command privilege settings and CLI management commands) · RBAC · Login management (including login methods and login user access control) · FTP and TFTP · File system management · Configuration file management · Software upgrade · ISSU · Automatic configuration · Device management · Tcl · Python · License management · MAC address learning through a Layer 3 device |
Virtual Technologies Command Reference | Covers the commands for configuring IRF and contexts. |
Security Command Reference | Covers security feature commands. Available security features include identity authentication (AAA and PKI), access security (portal), secure management (SSH), and attack protection (ARP attack protection, uRPF, and attack detection and prevention). This command reference includes: · Security zone · Security policy · Object group · Object policy · AAA · Portal · User identification · Password control · PKI · SSH · SSL · ASPF · APR · Session management · Connection limit · Attack detection and prevention · IP source guard · ARP attack protection · ND attack defense · uRPF · Crypto engine · IP-MAC binding · IPoE · IP reputation · Keychain · MAC authentication · Server connection detection |
DPI Command Reference | Covers the commands for configuring deep packet inspection (DPI). This command reference includes: · DPI engine · IPS · URL filtering · Data filtering · File filtering · Anti-virus · Data analysis center · Proxy policy · WAF |
NAT Command Reference | Covers the commands for configuring NAT, NAT66, and AFT. |
VPN Command Reference | Covers the commands of multiple VPN technologies. This command reference includes: · IPsec, IKE, and IKEv2 · SSL VPN · ADVPN · Tunneling · GRE · L2TP |
Internet Access Behavior Management Command Reference | Covers the Internet access behavior management commands. This command reference includes: · Bandwidth management · Application audit and management · NetShare control |
Load Balancing Command Reference | Covers the load balancing commands. |
Interface Command Reference | Covers the interface management commands. This command reference includes: · Bulk interface · Ethernet interface · Loopback, null, and inloopback interfaces |
Layer 2—LAN Switching Command Reference | Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: · MAC address table · Ethernet link aggregation · VLAN · VLAN termination · Spanning tree · LLDP · Layer 2 forwarding |
Layer 2—WAN Access Command Reference | Covers the Layer 2 WAN access commands. This command reference includes: · PPP · 3G and 4G modem management |
Layer 3—IP Services Command Reference | Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes: · ARP (including proxy ARP) · IP addressing · DHCP · DNS · Basic IP forwarding and load sharing · Fast forwarding · Multi-CPU packet distribution · Adjacency table · IPv6 basics · DHCPv6 · IPv6 fast forwarding |
Layer 3—IP Routing Command Reference | Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes: · Basic IP routing · Static routing · RIP · OSPF · IS-IS · BGP · Policy-based routing · IPv6 static routing · IPv6 policy-based routing · RIPng · OSPFv3 · Routing policy |
ACL and QoS Command Reference | Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: · ACL · QoS (including QoS policy and traffic policing) · Time range |
IP Multicast Command Reference | Covers the commands for Layer 3 multicast protocols. This command reference includes: · Multicast routing and forwarding · PIM · IGMP |
High Availability Command Reference | Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes: · VRRP · Reth interface and redundancy group · BFD · Track · Process placement · Interface collaboration · Monitor Link · Interface backup · RBM · Smart Link |
Network Management and Monitoring Command Reference | Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes: · System maintenance and debugging (ping, tracert, and system debugging) · NQA · NTP · EAA · Process monitoring and maintenance · NETCONF · CWMP · Information center · SNMP · NetStream · RMON · Flow log · Event MIB · Packet capture · Fast log output · Mirroring |
VPN Instance Command Reference | Covers the commands for configuring VPN instances. |