LSQM2TGS48SG0 Card Manual-6PW103

HomeSupportResource CenterSwitchesH3C S7500E Switch SeriesH3C S7500E Switch SeriesTechnical DocumentsInstall & UpgradeService Module Card ManualsLSQM2TGS48SG0 Card Manual-6PW103
Download Book
Title Size Downloads
LSQM2TGS48SG0 Card Manual-6PW103-book.pdf 16.79 KB
Table of Contents
Related Documents

48-port 10GBASE-R-SFP+ optical Ethernet interface card—LSQM2TGS48SG0

1  Card identifier

The card identifier LSQM2TGS48SG0 is in the upper right corner of the front panel.

2  Specifications

CAUTION

CAUTION:

To avoid card damage, do not install this card in slot 10 on an S7510E switch.

 

Table 1 Card specifications

Item

Specification

Card size (H × W × D)

40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)

SDRAM (DDR3)

2GB

Power consumption

 67W to152W

Ports

48 x 10GBASE-R-SFP+ fiber port

Port speed

10 Gbps

 

 

NOTE:

·      To verify the compatibility of the card with the software release you are using, see the release notes.

·      For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device.

 

3  Related documentation

For module installation, see the installation guide for the device.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2016-2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.