Login
| Title | Size | Downloads |
|---|---|---|
| LSQM1CQGS12SG0 Card Manual-6PW107-book.pdf | 76.39 KB |
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| book | 76.39 KB |
LSQM1CQGS12SG0 12-port 40GBASE-R-QSFP+/4-port 100GBASE-R-QSFP28 optical Ethernet interface card
1
Card identifier
The module identifier LSQM1CQGS12SG0 is in the upper right corner of the front panel.
2
Specifications
|
|
CAUTION: To avoid card damage, do not install this card in slot 10 on an S7510E switch. |
|
|
IMPORTANT: After you change 40-GE interfaces to 100-GE interfaces, only ports 1, 4, 7, and 10 are available. |
Table 1 Card specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
|
SDRAM (DDR3) |
2 GB |
|
Power consumption |
55 W to 147 W |
|
Interfaces |
12 × 40GBASE-R-QSFP+ fiber port or 4 × 100GBASE-R-QSFP28 fiber port |
|
Transmission rate |
40GBASE-R-QSFP+ fiber port: 40 Gbps 100GBASE-R-QSFP28 fiber port: 100 Gbps |
|
|
NOTE: · To verify the compatibility of the card with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device. |
3
Related documentation
For module installation, see the installation guide for the device.
For software upgrade, see the release notes for the device.
Copyright © 2016-2020 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
