Fundamentals Command Reference

Covers the commands for logging in to and setting up the switch. This command reference includes:

·     Basic CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Device management

·     Tcl

·     Python

Virtual Technologies Command Reference

Covers the commands for configuring the H3C proprietary Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

·     Bulk interface configuration

·     MAC address table and MAC Information

·     Ethernet link aggregation

·     Port isolation

·     Spanning tree

·     Loop detection

·     VLAN (including VLAN, super VLAN, private VLAN, and voice VLAN)

·     MVRP

·     QinQ

·     VLAN mapping

·     LLDP

·     L2PT

Layer 3—IP Services Command Reference

Covers the commands for configuring IP addressing, IP performance optimization, ARP, IP forwarding basic, DHCP, DNS, UDP helper, IPv6 basics, and DHCPv6 server. This command reference includes:

·     ARP (including gratuitous ARP, proxy ARP, ARP snooping, and ARP direct route advertisement)

·     IP addressing

·     DHCP

·     DNS (including DDNS)

·     IP forwarding basics (including basic IP forwarding and load sharing)

·     Fast forwarding

·     Adjacency table

·     IRDP

·     IP performance optimization

·     UDP helper

·     IPv6 basics

·     DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

·     HTTP redirect

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 policy-based routing

·     Routing policy

IP Multicast Command Reference

Covers the commands for Layer 2 and Layer 3 multicast protocols.

This command reference includes:

·     IGMP snooping

·     PIM snooping

·     Multicast VLAN

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     MLD snooping

·     IPv6 PIM snooping

·     IPv6 multicast VLAN

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

MCE Command Reference

Covers the commands for configuring MCE.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS (including QoS policy, priority mapping, GTS and rate limit,  congestion management, and global CAR)

·     Data buffer

·     Time range

Security Command Reference

Covers security feature commands. Available security features include identity authentication, secure management, and attack protection. This command reference includes:

·     AAA

·     802.1X

·     MAC authentication

·     Portal

·     Web authentication

·     Port security

·     User profile

·     Password control

·     Keychain

·     Public key management

·     PKI

·     IPsec, IKE, and IKEv2

·     SSH

·     SSL

·     Attack detection and prevention

·     TCP attack prevention

·     IP source guard

·     ARP attack protection

·     ND attack defense

·     uRPF

·     SAVI

·     MFF

·     Crypto engine

·     FIPS

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Ethernet OAM

·     CFD

·     DLDP

·     RRPP

·     ERPS

·     Smart Link

·     Monitor Link

·     VRRP

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     NQA

·     NTP (including SNTP)

·     SNMP

·     RMON

·     Event MIB

·     NETCONF

·     SmartMC

·     CWMP

·     EAA

·     Process monitoring and maintenance

·     Mirroring (including both port and flow mirroring)

·     sFlow

·     Information center

·     Packet capture

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

VXLAN Command Reference

Covers the commands for configuring VXLAN.

EVPN Command Reference

Covers the commands for configuring EVPN.