00-About the H3C S12500R Command References

HomeSupportResource CenterSwitchesH3C S12500R Switch Router SeriesH3C S12500R Switch Router SeriesTechnical DocumentsReference GuidesCommand ReferencesH3C S12500R Switch Router Series Command References(R51xx)-6W10100-About the H3C S12500R Command References
Download Book
Table of Contents
Related Documents

About the H3C S12500R command references

CAUTION

CAUTION:

For information about modules supported by software Release 5110 and later, see the release notes for H3C S12500R Release 5110 and later.

 

IMPORTANT

IMPORTANT:

The debugging and diagnostic commands on the device are used only by the professional maintenance personnel for network fault diagnosis. If necessary, contact H3C Support to obtain the related manuals.

 

All commands on the device are declared.

The H3C S12500R command references describe the commands and command syntax options available for the H3C S12500R Switch Router Series.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device.

This command reference includes:

·     CLI (command privilege settings and CLI management commands).

·     RBAC.

·     Logging in to the device (login methods, and user interface configuration and access control).

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     Automatic configuration.

·     Preprovisioning.

System Management Command Reference

Covers the configuration commands for device system management and monitoring features.

This command reference includes:

·     Basic device management.

·     Device hardening.

·     Hardware resource management.

·     EAA.

·     Process monitoring and maintenance

·     Information center.

·     GOLD.

Interface Command Reference

Covers interface configuration commands.

This command reference includes:

·     Common interface commands.

·     Bulk interface configuration.

·     Ethernet interface.

·     Loopback, null, and inloopback interfaces.

·     Tunnel interface.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·     MAC address table.

·     Ethernet link aggregation.

·     VLAN.

·     VLAN mapping.

·     Loopback detection.

·     Spanning tree.

·     LLDP.

·     Service loopback group.

·     MVRP.

·     PFC.

·     Cut-through Layer 2 forwarding.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing, network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This command reference includes:

·     ARP, gratuitous ARP, proxy ARP, ARP snooping, ARP fast-reply, ARP direct route advertisement.

·     IP addressing.

·     DHCP.

·     DNS and DDNS.

·     IP forwarding basics.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     IPv6 neighbor discovery.

·     DHCPv6.

·     IPv6 fast forwarding.

·     IPv6 transition technologies.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This command reference includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     Basic BGP.

·     Advanced BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

·     DCN.

MPLS Command Reference

Covers the MPLS commands.

This command reference includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     MPLS TE.

·     Static CRLSP.

·     RSVP.

·     Tunnel policy.

·     MPLS L3VPN.

·     IPv6 MPLS L3VPN.

·     MPLS OAM.

·     MCE and IPv6 MCE.

Segment Routing Command Reference

Covers the commands for configuring SR protocol and the extended features.

This command reference includes:

·     SR-MPLS.

·     SR-MPLS TE policy.

VXLAN Command Reference

Covers the commands for configuring VXLAN features, including basic VXLAN and VXLAN IP gateway.

EVPN Command Reference

Covers the EVPN commands.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This command reference includes:

·     ACL.

·     QoS (including QoS policy, priority mapping, GTS and rate limit, congestion management, congestion avoidance, and aggregate CAR).

·     MPLS QoS.

·     Data buffer.

·     Time range.

·     Flowspec.

IP Tunneling Command Reference

Covers IP tunneling commands.

This command reference includes:

·     GRE.

·     IPsec.

·     IKEv2.

·     IKE.

User Access and Authentication Command Reference

Covers the commands for configuring user access and authentication features.

This command reference includes:

·     AAA.

·     Password control.

Security Command Reference

Covers security feature commands. The major security features available on the device include: data security (public key management and SSH), and attack protection (ARP attack protection, uRPF, attack detection and prevention).

This command reference includes:

·     Keychain.

·     Public key configuration.

·     PKI.

·     SSH.

·     SSL.

·     Packet filter.

·     DHCP snooping.

·     DHCPv6 snooping.

·     ARP attack protection.

·     ND attack defense.

·     Attack detection and defense.

·     uRPF.

·     IP source guard.

·     Crypto engine.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     VRRP.

·     BFD.

·     Track.

·     Interface collaboration.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·     Ping and tracert.

·     System debugging.

·     NQA.

·     NTP and SNTP.

·     SNMP.

·     RMON.

·     Event MIB.

·     Sampler.

·     Mirroring (including both port and traffic mirroring).

·     NetStream.

·     IPv6 NetStream.

·     sFlow.

·     CWMP.

·     PTP.

Telemetry Command Reference

Covers the commands for configuring telemetry related features.

This command reference includes:

·     gRPC.

·     Telemetry stream.

·     Flow group.

·     INT.

·     MOD.

Application Hosting Command Reference

Covers the commands for deploying container and RPM applications.

This command reference includes:

·     Container application hosting.

·     RPM application hosting.

·     Command container and open application parameter configuration.

Network Programmability Command Reference

Covers the commands for configuring network programmability.

This command reference includes:

·     RESTful.

·     NETCONF.

·     Tcl.

·     Python.

OpenFlow Command Reference

Covers OpenFlow commands.

 

 

NOTE:

Except for the above listed commands, the device has some commands that are not supported in the current software version. You can view and enter these commands, but the device does not support the features configured or displayed by using these commands.