- Released At: 26-06-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1TGS48HFR1 48-port 10GBASE SFP+ Ethernet optical interface module
1 Identifier
The module identifier LSXM1TGS48HFR1 is in the upper right corner of the front panel.
2 About the module
|
CAUTION: This module can be used only with Type H fabric modules, which have a character string of SFH in their module identifiers (for example, LSXM2SFH16CR1). Module damage will occur if this module is used with a fabric module that is not Type H. |
|
NOTE: Fabric module slots are covered by fan trays. To verify the identifiers of the fabric modules when the switch is operating, use the display device command. |
Figure 1 Port types and numbers
(1) SFP+ ports |
Table 1 Module specifications
Item |
Specification |
Processor |
Intel processor (Quad-Core) @ 2.2 GHz |
SDRAM |
8 GB DDR4 SDRAM |
Power consumption |
136 W to 230 W |
Ports |
48 × 10GE SFP+ ports |
Port transmission rate |
10 Gbps |
Compatible device models |
H3C S12500R Ethernet switch router series |
Compatible fabric modules |
Type H fabric modules |
|
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see H3C S12500R Switch Router Series Cards and Transceiver Modules Compatibility Matrixes. |
3 Related documentation
For module installation, see H3C S12500R Switch Router Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2020 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.