H3C S12500R LSXM1TGS48HBR1 Card Manual-APW100

HomeSupportResource CenterSwitchesH3C S12500R Switch Router SeriesH3C S12500R Switch Router SeriesTechnical DocumentsInstall & UpgradeService Module Card ManualsH3C S12500R LSXM1TGS48HBR1 Card Manual-APW100
Download Book
Table of Contents
Related Documents

LSXM1TGS48HBR1 48-port 10G SFP+ fiber
interface card

1  Identifier

The card identifier LSXM1TGS48HBR1 is at the upper right corner of the front panel.

2  Specifications



This card can be used only with Type H switching fabric modules, which have a character string of SFH in their card identifiers (for example, LSXM2SFH16CR1). Card damage will occur if this card is used with a switching fabric module that is not Type H.




Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules when the switch is operating, use the display device command.


Figure 1 Interface types and numbers

(1) SFP+ ports



Table 1 Card specifications




Intel processor (Quad Core) @ 2.2 GHz



Power consumption

111 W to 210 W


48 × 10GE SFP+ ports

Transmission rate

10 Gbps

Compatible device models

S12500R Switch Router Series

Compatible switching fabric modules

Type H switching fabric modules




·         To verify compatibility of the card with the software release you are using, see the release notes.

·         To use the card, install switching fabric modules in the three highest-numbered switching fabric module slots.

·         For information about transceiver modules and cables available for the card, see H3C S12500R Switch Router Series Cards and Transceiver Modules Compatibility Matrixes.


3  Related documentation

For module installation, see H3C S12500R Switch Router Series Installation Guide.

For software upgrade, see the release notes for the device.



Copyright © 2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.