Login
- Released At: 04-12-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1CCQ48KBR1 48-port 200G QSFP56 Ethernet optical interface module
1 Identifier
The module identifier LSXM1CCQ48KBR1 is in the upper right corner of the front panel.
2 Specifications
|
|
CAUTION: This module can be used only with Type K fabric modules, which have a character string of SFK in their module identifiers (LSXM1SFK08FR1 for example). Module damage will occur if this module is used with a fabric module that is not Type K. |
|
|
IMPORTANT: Fabric module slots are covered by fan trays. To verify the identifiers of fabric modules when the device is operating, use the display device command. |
Figure 1 Interface types and numbers
|
(1) QSFP56 ports |
Table 1 Module specifications
|
Item |
Specification |
|
Processor |
Intel processor (Quad-Core) @ 2.2 GHz |
|
SDRAM |
16 GB DDR4 SDRAM |
|
Power consumption |
412 W to 1142 W |
|
Ports |
48 × 200GE QSFP56 ports |
|
Transmission rate |
200 Gbps |
|
Compatible device models |
· S12516R switch router (configured with high performance fan trays) · S12508R switch router (configured with high performance fan trays) · S12504R switch router (configured with high performance fan trays) · S12516CR switch router · S12508CR switch router |
|
Compatible fabric modules |
Type K fabric modules |
|
|
NOTE: · To verify compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see H3C S12500R Switch Router Series Cards and Transceiver Modules Compatibility Matrixes. |
3 Related documentation
For module installation, see H3C S12500R Switch Router Series Installation Guide and H3C S12500CR Switch Router Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2021 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
