- Released At: 26-06-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1SUP04TR1 service processing engine
1 Identifier
The card identifier LSXM1SUP04TR1 is at the upper right corner of the front panel.
2 Specifications
Table 1 Card specifications
Item |
Specification |
Processor |
Intel Processor (Quad Core) @ 2.2 GHz. |
SDRAM |
16GB DDR4 SDRAM (two DIMM slots). |
Flash |
8 GB (eMMC). |
NVRAM |
512 KB. |
Power consumption |
24 W to 35 W |
Connector |
· RJ-45. · LC. · USB (Type A). |
Interfaces |
· 1 × Console port. · 1 × 10/100/1000BASE-T port for management and upgrade. · 1 × SFP port for management and upgrade. · 1 × USB port (USB 2.0, Host port). · 2 × 1PPS/TOD time synchronization ports · 2 × SMB clock input ports · 2 × SMB clock output ports |
Transmission rate |
· Console port: 9600 bps (default) to 115200 bps. · 10/100/1000BASE-T port: 10/100/1000 Mbps. · SFP port: 1000 Mbps. |
Transmission medium and max transmission distance of the console port |
15 m (49.21 ft) over asynchronous serial cable. |
Transmission medium and max transmission distance of the 10/100/1000BASE-T port |
100 m (328.08 ft) over category-5 UTP. |
Compatible device models |
S12504R. |
|
IMPORTANT: · To verify compatibility of the card with the software release you are using, see the release notes. · The USB port outputs power as prescribed by USB 2.0. You can only connect a USB 2.0-compliant device to the USB port. · Set the same speed and duplex mode for a management Ethernet interface and its peer port. · For information about transceiver modules and cables available for the card, see H3C S12500R Switch Router Series Cards and Transceiver Modules Compatibility Matrixes. |
3 Related documentation
For module installation, see H3C S12500R Switch Router Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2019 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.