- Released At: 13-04-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C S12500R configuration guides
CAUTION: For information about modules supported by software Release 5110 and later, see the release notes for H3C S12500R Release 5110 and later. |
The H3C S12500R configuration guides describe the software features for the H3C S12500R Switch Router Series, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.
Configuration guide |
Content |
Fundamentals Configuration Guide |
Covers information about using the command line interface, logging in to and setting up the device, and using the basic management features. This guide includes: · CLI (command line interface overview and how to use the CLI). · RBAC. · Logging in to the device (login methods, and user interface configuration and access control). · FTP and TFTP. · File system management. · Configuration file management. · Software upgrade. · Automatic configuration. · Preprovisioning. |
System Management Configuration Guide |
Covers the configuration of device system management and monitoring features. This guide includes: · Basic device management. · Device hardening. · Hardware resource management. · EAA. · Process monitoring and maintenance · Information center. · GOLD. |
Interface Configuration Guide |
Covers the configuration of various interfaces. This guide includes: · Bulk interface configuration. · Ethernet interface. · Loopback, null, and inloopback interfaces. · Tunnel interface. |
Layer 2—LAN Switching Configuration Guide |
Covers Layer 2 technologies and features used on a LAN switched network. You can use these features to implement traffic control and load balancing, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags. This guide includes: · MAC address table. · Ethernet link aggregation. · VLAN. · VLAN mapping. · Loopback detection. · Spanning tree. · LLDP. · Service loopback group. · MVRP. · PFC. · Cut-through Layer 2 forwarding. |
Layer 3—IP Services Configuration Guide |
Covers IP addressing, network performance optimization, ARP, and interoperation between IPv4 and IPv6. This guide includes: · ARP, gratuitous ARP, proxy ARP, ARP snooping, ARP fast-reply, ARP direct route advertisement. · IP addressing. · DHCP. · DNS. · IP forwarding basics. · Fast forwarding. · Adjacency table. · IRDP. · IP performance optimization. · UDP helper. · IPv6 basics. · IPv6 neighbor discovery. · DHCPv6. · IPv6 fast forwarding. · IPv6 transition technologies. |
Layer 3—IP Routing Configuration Guide |
Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This guide includes: · Basic IP routing. · Static routing. · RIP. · OSPF. · IS-IS. · Basic BGP. · Advanced BGP. · Policy-based routing. · IPv6 static routing. · RIPng. · OSPFv3. · IPv6 policy-based routing. · Routing policy. · DCN. |
MPLS Configuration Guide |
Covers MPLS features. This guide includes: · Basic MPLS. · Static LSP. · LDP. · MPLS TE. · Static CRLSP. · RSVP. · Tunnel policy. · MPLS L3VPN. · IPv6 MPLS L3VPN. · MPLS OAM. · MCE and IPv6 MCE. |
Segment Routing Configuration Guide |
Covers the SR protocol and the extended features. This guide includes: · SR-MPLS. · SR-MPLS TE policy. |
VXLAN Configuration Guide |
Covers VXLAN fundamentals and configuration. This guide includes: · Basic VXLAN. · VXLAN IP gateway. · VXLAN DCI. |
EVPN Configuration Guide |
Covers EVPN fundamentals and configuration. This guide includes: · Basic EVPN. · EVPN DCI |
ACL and QoS Configuration Guide |
Covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This guide includes: · ACL. · QoS (including QoS overview, QoS policy, priority mapping, traffic policing, GTS, and rate limit, congestion management, congestion avoidance, traffic filtering, protocol packet rate limiting, priority marking, nesting, traffic redirecting, global CAR, traffic accounting, and appendixes). · MPLS QoS. · Data buffer. · Time range. · Flowspec. |
IP Tunneling Configuration Guide |
Covers IP tunneling fundamentals and configuration. This guide includes: · IPv4 over IPv4 tunneling. · GRE. · IPsec. · IKEv2. · IKE. |
User Access and Authentication Configuration Guide |
Covers fundamentals and configuration of user access and authentication configuration features. This guide includes: · AAA. · Password control. |
Security Configuration Guide |
Covers security features. The major security features available on the device include: data security (public key management and SSH), and attack protection (ARP attack protection, uRPF, attack detection and prevention). This guide includes: · Keychain. · Public key configuration. · PKI. · SSH. · SSL. · Packet filter. · DHCP snooping. · DHCPv6 snooping. · ARP attack protection. · ND attack defense. · Attack detection and defense. · uRPF. · IP source guard. · Crypto engine. |
High Availability Configuration Guide |
Covers high availability technologies and features available on the device for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This guide includes: · Ethernet OAM. · CFD. · DLDP. · ERPS. · Smart Link. · Monitor Link. · VRRP. · BFD. · Track. · Interface collaboration. |
Network Management and Monitoring Configuration Guide |
Covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This guide includes: · Ping and tracert. · System debugging. · NQA. · NTP and SNTP. · SNMP. · RMON. · Event MIB. · Sampler. · Mirroring (including both port and traffic mirroring). · NetStream. · IPv6 NetStream. · sFlow. · CWMP. · PTP. |
Telemetry Configuration Guide |
Covers fundamentals and configuration for telemetry related features. This guide includes: · gRPC. · Telemetry stream. · Flow group. · INT. · MOD. |
Application Hosting Configuration Guide |
Covers information about deploying container and RPM applications. This guide includes: · Container application hosting. · RPM application hosting. · Command container and open application parameter configuration. |
Network Programmability Configuration Guide |
Covers features for network programmability. This guide includes: · RESTful. · NETCONF. · Tcl. · Python. |
OpenFlow Configuration Guide |
Covers OpenFlow fundamentals and configuration. |
Acronyms |
Lists the significant acronyms in the configuration guides. |