H3C LSEM1GT48TSSD0 Card Manual-APW100

HomeSupportResource CenterSwitchesH3C S10500X-G Switch SeriesH3C S10500X-G Switch SeriesTechnical DocumentsInstall & UpgradeService Module Card ManualsH3C LSEM1GT48TSSD0 Card Manual-APW100
Download Book
Table of Contents
Related Documents

48-port 10/100/1000BASE-T electrical Ethernet interface + 4-port 10GBASE-R-SFP+ optical Ethernet interface card-LSEM1GT48TSSD0

1  Card identifier

The card identifier LSEM1GT48TSSD0 is at the upper left corner of the front panel.

Table 1 Card specifications

Item

Specifications

Card size (H × W × D)

51 × 423 × 270 mm (2.01 × 16.65 × 10.63 in)

SDRAM

2 GB

Power consumption

28 W to 55 W

Ports

·     48 × 10/100/1000BASE-T copper ports

·     4 x 10GBASE-R-SFP+ fiber ports

Port speed

·     10/100/1000 Mbps

·     10 Gbps

 

 

NOTE:

·     To verify the compatibility of the card with the software release you are using, see the release notes.

·     For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device.

 

A 10/100/1000BASE-T copper port uses an RJ-45 connector. It supports Category 5 or above twisted pair cables and provides a transmission distance of 100 m (328.08 ft).

Figure 1 RJ-45 connector

 

Table 2 RJ-45 GE connector pin assignment

Pin

10BASE-T/100BASE-TX/1000BASE-T

Signal

Function

1

MX_0+

Transmits and receives data

2

MX_0-

Transmits and receives data

3

MX_1+

Transmits and receives data

4

MX_2+

Transmits and receives data

5

MX_2-

Transmits and receives data

6

MX_1-

Transmits and receives data

7

MX_3+

Transmits and receives data

8

MX_3-

Transmits and receives data

 

2  Related documentation

For information about module installation, see the installation guide for the device.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2021 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.