- Released At: 31-12-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C access point command references
The H3C access point (AP) command references describe the commands and command syntax options for the H3C APs. (on fat APs)
Command reference |
Content |
Fundamentals Command Reference |
Covers the commands for logging in to and setting up the device. This command reference includes: · CLI (CLI overview and advanced CLI configuration) · FTP and TFTP · RBAC · Tcl · File system management · Login management (CLI login and user configuration and management) · Software upgrade · Configuration file management |
System Management Command Reference |
Covers the commands for managing the device and logs by using device management, information center, and NTP features. This command reference includes: · NTP · Information center · Device management |
Interface Command Reference |
Covers the commands for configuring Ethernet interfaces, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This command reference includes: · Loopback, null, and inloopback interface · Ethernet interface · Bulk interface configuration |
Network Connectivity Command Reference |
Covers the commands for configuring network connectivity-related Layer 2 and Layer 3 features. This command reference includes: · MAC address table · Ethernet link aggregation · VLAN · Loop detection · Spanning tree · LLDP · Layer 2 forwarding · Port isolation · PPP · ARP · IP addressing · DHCP · DHCPv6 · DNS · NAT · IP performance optimization · IPv6 basics · Basic IP routing · Static routing · IPv6 static routing · IGMP snooping · MLD snooping |
WLAN Access Command Reference |
Covers the commands for configuring WLAN access. This command reference includes: WLAN access |
AP Management Command Reference |
Covers the commands for configuring centralized management of fit APs in an AC+fit AP network. This command reference includes: AP management |
WLAN Security Command Reference |
Covers the commands for configuring WLAN security and WIPS features. This command reference includes: · WLAN security · WIPS |
Radio Resources Management Command Reference |
Covers the commands for managing radio channel, power, rate, and load balancing. This command reference includes: · Radio management · WLAN load balancing · Band navigation · Channel scanning · Spectrum management · WLAN radio load balancing |
WLAN Mesh Command Reference |
Covers the commands for establishing and configuring WLAN mesh networks. This command reference includes: WLAN mesh |
WLAN Traffic Optimization Command Reference |
Covers the commands for optimizing WLAN traffic by using multicast optimization and user isolation. This command reference includes: · WLAN multicast optimization · User isolation |
WLAN Advanced Features Command Reference |
Covers the commands for WLAN advanced features. This command reference includes: · WLAN optimization · WLAN probe · Bonjour gateway · WLAN forwarding |
User Access and Authentication Command Reference |
Covers the commands for configuring wired and wireless access and authentication. This command reference includes: · WLAN authentication · WLAN IP snooping · AAA · 802.1X · 802.1X client · MAC authentication · Port security · Portal |
Internet of Things Command Reference |
Covers the commands for configuring and managing IoT gateways. This command reference includes: IoT gateway |
Oasis Connection Command Reference |
Covers the commands for users to manage devices from the Oasis platform. This command reference includes: Cloud connection |
Security Command Reference |
Covers the commands for configuring identity authentication (PKI), secure management (password control, public key management, IPsec, and SSH), and security protection (IP source guard and ARP attack protection). This command reference includes: · ACL · Time range · User profile · Public key management · PKI · IPsec · SSH · SSL · Session management · Attack detection and prevention · ARP attack protection · ND attack protection · Crypto engine |
QoS Command Reference |
Covers the commands for configuring wired and wireless QoS. This command reference includes: · WLAN QoS (WMM, SVP, bandwidth guaranteeing, and client rate limit) · QoS (priority mapping, traffic policing, traffic filtering, and priority marking) |
Internet of Things Command Reference |
Covers the commands for configuring and managing LoRaWAN network gateways. This command reference includes: LoRaWAN |
Network Management and Monitoring Command Reference |
Covers the commands that help you manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This command reference includes: · System maintenance and debugging (ping, tracert, and system debugging) · CWMP · NQA · SNMP · NETCONF · Process monitoring and maintenance · Packet capture |
Index |
Covers all the commands supported by the device. |