- Released At: 26-07-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C S12500-X & S12500X-AF command references
CAUTION: · Software with a version number in the format Release 11xx applies only to F-series LPUs (FC or FX, for example). E-series LPUs (EA, EB, or EC, for example) cannot run the software. · Do not install an E-series LPU in the same chassis as an F-series LPU. |
Command reference |
Content |
Fundamentals Command Reference |
Covers the commands for logging in to and setting up the switch. This command reference includes: · Basic CLI · Login management · RBAC · FTP and TFTP · File system management · Configuration file management · Software upgrade · ISSU · Device management · MDC · Python · License · Preprovisioning |
IRF Command Reference |
Covers the commands for configuring the H3C proprietary Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric. |
Layer 2—LAN Switching Command Reference |
Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: · Ethernet interface · Loopback, null, and inloopback interface · Bulk interface configuration · MAC address table and MAC Information · Ethernet link aggregation · Port isolation · Spanning tree · Loop detection · VLAN · VLAN mapping · LLDP |
Layer 3—IP Services Command Reference |
Covers the commands for configuring IP addressing, IP performance optimization, ARP, IP forwarding basic, DHCP, DNS, and UDP helper. This command reference includes: · ARP (including gratuitous ARP and proxy ARP) · IP addressing · DHCP · DNS · Basic IP forwarding and load sharing · IRDP · IP performance optimization · UDP helper |
Layer 3—IP Routing Command Reference |
Covers the commands for configuring routes for IPv4 networks of different sizes. This command reference includes: · Basic IP routing · Static routing · RIP · OSPF · IS-IS · BGP · Policy-based routing · Routing policy |
IP Multicast Command Reference |
Covers the commands for Layer 3 IPv4 multicast protocols (IGMP and PIM), Layer 2 IPv4 multicast protocols (IGMP snooping). This command reference includes: · IGMP snooping · Multicast routing and forwarding · IGMP · PIM · MSDP |
MPLS Command Reference |
Covers the commands for configuring basic MPLS and extended MPLS functions. This command reference includes: · Basic MPLS · LDP · MPLS TE · Static CRLSP · RSVP · Tunnel policy · MPLS L3VPN · MCE |
ACL and QoS Command Reference |
Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: · ACL · QoS, including the following: ¡ QoS policy ¡ Priority mapping ¡ Congestion management · Time range · Data buffer |
Security Command Reference |
Covers security feature commands. Available security features include identity authentication, secure management, and attack protection. This command reference includes: · AAA · Password control · PKI · SSL · IPsec and IKE · SSH · IP source guard · ARP attack protection · uRPF · FIPS · Attack detection and prevention |
High Availability Command Reference |
Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes: · DLDP · VRRP · BFD · Track |
Network Management and Monitoring Command Reference |
Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes: · System maintenance and debugging (ping, tracert, and system debugging) · Sampler · Mirroring (including both port and traffic mirroring) · sFlow · EAA · NQA · NETCONF |
FCoE Command Reference |
Covers the commands for configuring FCoE. |
TRILL Command Reference |
Covers the commands for configuring TRILL. |
SPB Command Reference |
Covers the commands for configuring SPB. |
EVI Command Reference |
Covers the commands for configuring EVI. |
OpenFlow Command Reference |
Covers the commands for configuring OpenFlow. |
VXLAN Command Reference |
Covers the commands for configuring VXLAN. |