H3C MSR Routers System Log Messages Reference-R0821-6W100

HomeSupportResource CenterDiagnose & MaintainH3C MSR Routers System Log Messages Reference-R0821-6W100
Table of Contents
Related Documents

 

H3C MSR Routers System Log Messages Reference

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright © 2021 New H3C Technologies Co., Ltd. All rights reserved.

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.

The information in this document is subject to change without notice.


Contents

Introduction· 1

System log message format 1

Managing and obtaining system log messages· 3

Obtaining log messages from the console terminal 3

Obtaining log messages from a monitor terminal 4

Obtaining log messages from the log buffer 4

Obtaining log messages from the log file· 4

Obtaining log messages from a log host 4

Software module list 4

Using this document 9

AAA messages· 10

AAA_FAILURE· 10

AAA_LAUNCH· 11

AAA_SUCCESS· 11

ACL messages· 11

ACL_ACCELERATE_NO_RES· 12

ACL_ACCELERATE_NONCONTIGUOUSMASK· 12

ACL_ACCELERATE_NOT_SUPPORT· 12

ACL_ACCELERATE_NOT_SUPPORTHOPBYHOP· 13

ACL_ACCELERATE_NOT_SUPPORTMULTITCPFLAG·· 13

ACL_ACCELERATE_UNK_ERR· 13

ACL_DYNRULE_COMMENT· 14

ACL_DYNRULE_MDF· 14

ACL_IPV6_STATIS_INFO·· 14

ACL_NO_MEM·· 15

ACL_RULE_REACH_MAXNUM·· 15

ACL_RULE_SUBID_EXCEED·· 15

ACL_STATIS_INFO·· 16

ADVPN messages· 16

ADVPN_SESSION_DELETED·· 16

ADVPN_SESSION_STATE_CHANGED·· 17

AFT· 17

AFT_V4TOV6_FLOW·· 18

AFT_V6TOV4_FLOW·· 19

ANCP messages· 19

ANCP_INVALID_PACKET· 20

ANTIVIRUS messages· 20

ANTIVIRUS_IPV4_INTERZONE· 21

ANTIVIRUS_IPV6_INTERZONE· 22

ANTIVIRUS_WARNING·· 23

ANTIVIRUS_WARNING·· 23

ANTIVIRUS_WARNING·· 23

APMGR messages· 23

AP_CREATE_FAILURE· 24

AP_REBOOT_REASON· 24

APMGR_ADDBAC_INFO·· 24

APMGR_AP_CFG_FAILED·· 25

APMGR_AP_ONLINE· 25

APMGR_DELBAC_INFO·· 25

APMGR_GET_AP_MODEL_FAILURE· 26

APMGR_LOG_ADD_AP_FAIL· 26

APMGR_LOG_LACOFFLINE· 26

APMGR_LOG_LACONLINE· 27

APMGR_LOG_MEMALERT· 27

APMGR_LOG_NOLICENSE· 27

APMGR_LOG_OFFLINE· 28

APMGR_LOG_ONLINE· 28

APMGR_LOG_ONLINE_FAILED·· 28

APMGR_REACH_MAX_APNUMBER· 29

APMGR_ERROR· 29

CWC_AP_DOWN· 30

CWC_AP_UP· 30

CWC_AP_REBOOT· 31

CWC_IMG_DOWNLOAD_COMPLETE· 31

CWS_IMG_DOWNLOAD_FAILED·· 31

CWC_IMG_DOWNLOAD_START· 32

CWC_IMG_NO_ENOUGH_SPACE· 32

CWC_LOCALAC_DOWN· 33

CWC_LOCALAC_UP· 33

CWC_RUN_DOWNLOAD_COMPLETE· 33

CWC_RUN_DOWNLOAD_START· 34

CWC_RUN_NO_ENOUGH_SPACE· 34

CWS_AP_DOWN· 35

CWS_AP_UP· 35

CWS_IMG_DOWNLOAD_COMPLETE· 36

CWS_IMG_DOWNLOAD_FAILED·· 36

CWS_IMG_DOWNLOAD_START· 36

CWS_IMG_OPENFILE_FAILED·· 37

CWS_LOCALAC_DOWN· 37

CWS_LOCALAC_UP· 37

CWS_RUN_DOWNLOAD_COMPLETE· 38

CWS_RUN_DOWNLOAD_START· 38

RADIO·· 38

Application account extraction messages· 39

USER-NETLOG·· 39

APR messages· 39

NBAR_WARNING·· 39

NBAR_WARNING·· 40

NBAR_WARNING·· 40

ARP messages· 40

ARP_ACTIVE_ACK_NO_REPLY· 41

ARP_ACTIVE_ACK_NOREQUESTED_REPLY· 41

ARP_BINDRULETOHW_FAILED·· 42

ARP_DYNAMIC· 42

ARP_DYNAMIC_IF· 43

ARP_DYNAMIC_SLOT· 43

ARP_HOST_IP_CONFLICT· 43

ARP_RATE_EXCEEDED·· 44

ARP_SENDER_IP_INVALID·· 44

ARP_SENDER_MAC_INVALID·· 44

ARP_SRC_MAC_FOUND_ATTACK· 45

ARP_TARGET_IP_INVALID·· 45

DUPIFIP· 45

DUPIP· 46

DUPVRRPIP· 46

ASPF messages· 46

ASPF_IPV4_DNS· 47

ASPF_IPV6_DNS· 48

ATK messages· 48

ATK_ICMP_ADDRMASK_REQ·· 49

ATK_ICMP_ADDRMASK_REQ_RAW·· 50

ATK_ICMP_ADDRMASK_REQ_RAW_SZ· 51

ATK_ICMP_ADDRMASK_REQ_SZ· 52

ATK_ICMP_ADDRMASK_RPL· 53

ATK_ICMP_ADDRMASK_RPL_RAW·· 54

ATK_ICMP_ADDRMASK_RPL_RAW_SZ· 55

ATK_ICMP_ADDRMASK_RPL_SZ· 56

ATK_ICMP_ECHO_REQ·· 57

ATK_ICMP_ECHO_REQ_RAW·· 58

ATK_ICMP_ECHO_REQ_RAW_SZ· 59

ATK_ICMP_ECHO_REQ_SZ· 60

ATK_ICMP_ECHO_RPL· 61

ATK_ICMP_ECHO_RPL_RAW·· 62

ATK_ICMP_ECHO_RPL_RAW_SZ· 63

ATK_ICMP_ECHO_RPL_SZ· 64

ATK_ICMP_FLOOD·· 64

ATK_ICMP_FLOOD_SZ· 65

ATK_ICMP_INFO_REQ·· 66

ATK_ICMP_INFO_REQ_RAW·· 67

ATK_ICMP_INFO_REQ_RAW_SZ· 68

ATK_ICMP_INFO_REQ_SZ· 69

ATK_ICMP_INFO_RPL· 70

ATK_ICMP_INFO_RPL_RAW·· 71

ATK_ICMP_INFO_RPL_RAW_SZ· 72

ATK_ICMP_INFO_RPL_SZ· 73

ATK_ICMP_LARGE· 74

ATK_ICMP_LARGE_RAW·· 75

ATK_ICMP_LARGE_RAW_SZ· 75

ATK_ICMP_LARGE_SZ· 76

ATK_ICMP_PARAPROBLEM·· 77

ATK_ICMP_PARAPROBLEM_RAW·· 78

ATK_ICMP_PARAPROBLEM_RAW_SZ· 79

ATK_ICMP_PARAPROBLEM_SZ· 80

ATK_ICMP_PINGOFDEATH· 81

ATK_ICMP_PINGOFDEATH_RAW·· 82

ATK_ICMP_PINGOFDEATH_RAW_SZ· 83

ATK_ICMP_PINGOFDEATH_SZ· 84

ATK_ICMP_REDIRECT· 85

ATK_ICMP_REDIRECT_RAW·· 86

ATK_ICMP_REDIRECT_RAW_SZ· 87

ATK_ICMP_REDIRECT_SZ· 88

ATK_ICMP_SMURF· 89

ATK_ICMP_SMURF_RAW·· 90

ATK_ICMP_SMURF_RAW_SZ· 91

ATK_ICMP_SMURF_SZ· 92

ATK_ICMP_SOURCEQUENCH· 93

ATK_ICMP_SOURCEQUENCH_RAW·· 94

ATK_ICMP_SOURCEQUENCH_RAW_SZ· 95

ATK_ICMP_SOURCEQUENCH_SZ· 96

ATK_ICMP_TIMEEXCEED·· 97

ATK_ICMP_TIMEEXCEED_RAW·· 98

ATK_ICMP_TIMEEXCEED_RAW_SZ· 99

ATK_ICMP_TIMEEXCEED_SZ· 100

ATK_ICMP_TRACEROUTE· 101

ATK_ICMP_TRACEROUTE_RAW·· 102

ATK_ICMP_TRACEROUTE_RAW_SZ· 102

ATK_ICMP_TRACEROUTE_SZ· 103

ATK_ICMP_TSTAMP_REQ·· 104

ATK_ICMP_TSTAMP_REQ_RAW·· 105

ATK_ICMP_TSTAMP_REQ_RAW_SZ· 106

ATK_ICMP_TSTAMP_REQ_SZ· 107

ATK_ICMP_TSTAMP_RPL· 108

ATK_ICMP_TSTAMP_RPL_RAW·· 109

ATK_ICMP_TSTAMP_RPL_RAW_SZ· 110

ATK_ICMP_TSTAMP_RPL_SZ· 111

ATK_ICMP_TYPE· 112

ATK_ICMP_TYPE_RAW·· 113

ATK_ICMP_TYPE_RAW_SZ· 114

ATK_ICMP_TYPE_SZ· 115

ATK_ICMP_UNREACHABLE· 116

ATK_ICMP_UNREACHABLE_RAW·· 117

ATK_ICMP_UNREACHABLE_RAW_SZ· 118

ATK_ICMP_UNREACHABLE_SZ· 119

ATK_ICMPV6_DEST_UNREACH· 120

ATK_ICMPV6_DEST_UNREACH_RAW·· 121

ATK_ICMPV6_DEST_UNREACH_RAW_SZ· 121

ATK_ICMPV6_DEST_UNREACH_SZ· 122

ATK_ICMPV6_ECHO_REQ·· 123

ATK_ICMPV6_ECHO_REQ_RAW·· 124

ATK_ICMPV6_ECHO_REQ_RAW_SZ· 124

ATK_ICMPV6_ECHO_REQ_SZ· 125

ATK_ICMPV6_ECHO_RPL· 126

ATK_ICMPV6_ECHO_RPL_RAW·· 127

ATK_ICMPV6_ECHO_RPL_RAW_SZ· 127

ATK_ICMPV6_ECHO_RPL_SZ· 128

ATK_ICMPV6_FLOOD·· 128

ATK_ICMPV6_FLOOD_SZ· 129

ATK_ICMPV6_GROUPQUERY· 129

ATK_ICMPV6_GROUPQUERY_RAW·· 130

ATK_ICMPV6_GROUPQUERY_RAW_SZ· 130

ATK_ICMPV6_GROUPQUERY_SZ· 131

ATK_ICMPV6_GROUPREDUCTION· 132

ATK_ICMPV6_GROUPREDUCTION_RAW·· 133

ATK_ICMPV6_GROUPREDUCTION_RAW_SZ· 133

ATK_ICMPV6_GROUPREDUCTION_SZ· 134

ATK_ICMPV6_GROUPREPORT· 135

ATK_ICMPV6_GROUPREPORT_RAW·· 136

ATK_ICMPV6_GROUPREPORT_RAW_SZ· 136

ATK_ICMPV6_GROUPREPORT_SZ· 137

ATK_ICMPV6_LARGE· 138

ATK_ICMPV6_LARGE_RAW·· 138

ATK_ICMPV6_LARGE_RAW_SZ· 139

ATK_ICMPV6_LARGE_SZ· 139

ATK_ICMPV6_PACKETTOOBIG·· 140

ATK_ICMPV6_PACKETTOOBIG_RAW·· 141

ATK_ICMPV6_PACKETTOOBIG_RAW_SZ· 141

ATK_ICMPV6_PACKETTOOBIG_SZ· 142

ATK_ICMPV6_PARAPROBLEM·· 143

ATK_ICMPV6_PARAPROBLEM_RAW·· 144

ATK_ICMPV6_PARAPROBLEM_RAW_SZ· 144

ATK_ICMPV6_PARAPROBLEM_SZ· 145

ATK_ICMPV6_TIMEEXCEED·· 146

ATK_ICMPV6_TIMEEXCEED_RAW·· 147

ATK_ICMPV6_TIMEEXCEED_RAW_SZ· 147

ATK_ICMPV6_TIMEEXCEED_SZ· 148

ATK_ICMPV6_TRACEROUTE· 149

ATK_ICMPV6_TRACEROUTE_RAW·· 150

ATK_ICMPV6_TRACEROUTE_RAW_SZ· 151

ATK_ICMPV6_TRACEROUTE_SZ· 152

ATK_ICMPV6_TYPE· 153

ATK_ICMPV6_TYPE _RAW_SZ· 154

ATK_ICMPV6_TYPE_RAW·· 154

ATK_ICMPV6_TYPE_SZ· 155

ATK_IP_OPTION· 156

ATK_IP_OPTION_RAW·· 157

ATK_IP_OPTION_RAW_SZ· 158

ATK_IP_OPTION_SZ· 159

ATK_IP4_ACK_FLOOD·· 160

ATK_IP4_ACK_FLOOD_SZ· 160

ATK_IP4_DIS_PORTSCAN· 161

ATK_IP4_DIS_PORTSCAN_SZ· 161

ATK_IP4_DNS_FLOOD·· 162

ATK_IP4_DNS_FLOOD_SZ· 162

ATK_IP4_FIN_FLOOD·· 163

ATK_IP4_FIN_FLOOD_SZ· 163

ATK_IP4_FRAGMENT· 164

ATK_IP4_FRAGMENT_RAW·· 165

ATK_IP4_FRAGMENT_RAW_SZ· 166

ATK_IP4_FRAGMENT_SZ· 167

ATK_IP4_HTTP_FLOOD·· 168

ATK_IP4_HTTP_FLOOD_SZ· 168

ATK_IP4_IMPOSSIBLE· 169

ATK_IP4_IMPOSSIBLE_RAW·· 170

ATK_IP4_IMPOSSIBLE_RAW_SZ· 171

ATK_IP4_IMPOSSIBLE_SZ· 172

ATK_IP4_IPSWEEP· 173

ATK_IP4_IPSWEEP_SZ· 173

ATK_IP4_PORTSCAN· 174

ATK_IP4_PORTSCAN_SZ· 174

ATK_IP4_RST_FLOOD·· 175

ATK_IP4_RST_FLOOD_SZ· 175

ATK_IP4_SLOW_ATTACK· 176

ATK_IP4_SLOW_ATTACK_SZ· 176

ATK_IP4_SYN_FLOOD·· 177

ATK_IP4_SYN_FLOOD_SZ· 177

ATK_IP4_SYNACK_FLOOD·· 178

ATK_IP4_SYNACK_FLOOD_SZ· 178

ATK_IP4_TCP_ALLFLAGS· 179

ATK_IP4_TCP_ALLFLAGS_RAW·· 180

ATK_IP4_TCP_ALLFLAGS_RAW_SZ· 181

ATK_IP4_TCP_ALLFLAGS_SZ· 182

ATK_IP4_TCP_FINONLY· 183

ATK_IP4_TCP_FINONLY_RAW·· 184

ATK_IP4_TCP_FINONLY_RAW_SZ· 184

ATK_IP4_TCP_FINONLY_SZ· 185

ATK_IP4_TCP_INVALIDFLAGS· 186

ATK_IP4_TCP_INVALIDFLAGS_RAW·· 187

ATK_IP4_TCP_INVALIDFLAGS_RAW_SZ· 188

ATK_IP4_TCP_INVALIDFLAGS_SZ· 189

ATK_IP4_TCP_LAND·· 190

ATK_IP4_TCP_LAND_RAW·· 191

ATK_IP4_TCP_LAND_RAW_SZ· 192

ATK_IP4_TCP_LAND_SZ· 193

ATK_IP4_TCP_NULLFLAG·· 194

ATK_IP4_TCP_NULLFLAG_RAW·· 195

ATK_IP4_TCP_NULLFLAG_RAW_SZ· 196

ATK_IP4_TCP_NULLFLAG_SZ· 197

ATK_IP4_TCP_SYNFIN· 198

ATK_IP4_TCP_SYNFIN_RAW·· 199

ATK_IP4_TCP_SYNFIN_RAW_SZ· 199

ATK_IP4_TCP_SYNFIN_SZ· 200

ATK_IP4_TCP_WINNUKE· 201

ATK_IP4_TCP_WINNUKE_RAW·· 202

ATK_IP4_TCP_WINNUKE_RAW_SZ· 203

ATK_IP4_TCP_WINNUKE_SZ· 204

ATK_IP4_TEARDROP· 205

ATK_IP4_TEARDROP_RAW·· 206

ATK_IP4_TEARDROP_RAW_SZ· 207

ATK_IP4_TEARDROP_SZ· 208

ATK_IP4_TINY_FRAGMENT· 209

ATK_IP4_TINY_FRAGMENT_RAW·· 210

ATK_IP4_TINY_FRAGMENT_RAW_SZ· 211

ATK_IP4_TINY_FRAGMENT_SZ· 212

ATK_IP4_UDP_BOMB· 213

ATK_IP4_UDP_BOMB_RAW·· 214

ATK_IP4_UDP_BOMB_RAW_SZ· 215

ATK_IP4_UDP_BOMB_SZ· 216

ATK_IP4_UDP_FLOOD·· 216

ATK_IP4_UDP_FLOOD_SZ· 217

ATK_IP4_UDP_FRAGGLE· 218

ATK_IP4_UDP_FRAGGLE_RAW·· 219

ATK_IP4_UDP_FRAGGLE_RAW_SZ· 220

ATK_IP4_UDP_FRAGGLE_SZ· 221

ATK_IP4_UDP_SNORK· 222

ATK_IP4_UDP_SNORK_RAW·· 223

ATK_IP4_UDP_SNORK_RAW_SZ· 224

ATK_IP4_UDP_SNORK_SZ· 225

ATK_IP6_ACK_FLOOD·· 225

ATK_IP6_ACK_FLOOD_SZ· 226

ATK_IP6_DIS_PORTSCAN· 226

ATK_IP6_DIS_PORTSCAN_SZ· 227

ATK_IP6_DNS_FLOOD·· 227

ATK_IP6_DNS_FLOOD_SZ· 228

ATK_IP6_EXHEADER_ABNORMAL· 228

ATK_IP6_EXHEADER_ABNORMAL_RAW·· 229

ATK_IP6_EXHEADER_ABNORMAL_RAW_SZ· 229

ATK_IP6_EXHEADER_ABNORMAL_SZ· 230

ATK_IP6_EXHEADER_EXCEED·· 231

ATK_IP6_EXHEADER_EXCEED_RAW·· 232

ATK_IP6_EXHEADER_EXCEED_RAW_SZ· 233

ATK_IP6_EXHEADER_EXCEED_SZ· 234

ATK_IP6_FIN_FLOOD·· 234

ATK_IP6_FIN_FLOOD_SZ· 235

ATK_IP6_FRAGMENT· 235

ATK_IP6_FRAGMENT_RAW·· 236

ATK_IP6_FRAGMENT_RAW_SZ· 237

ATK_IP6_FRAGMENT_SZ· 238

ATK_IP6_HTTP_FLOOD·· 238

ATK_IP6_HTTP_FLOOD_SZ· 239

ATK_IP6_IMPOSSIBLE· 239

ATK_IP6_IMPOSSIBLE_RAW·· 240

ATK_IP6_IMPOSSIBLE_RAW_SZ· 241

ATK_IP6_IMPOSSIBLE_SZ· 242

ATK_IP6_IPSWEEP· 242

ATK_IP6_IPSWEEP_SZ· 243

ATK_IP6_PORTSCAN· 243

ATK_IP6_PORTSCAN_SZ· 244

ATK_IP6_RST_FLOOD·· 244

ATK_IP6_RST_FLOOD_SZ· 245

ATK_IP6_SYN_FLOOD·· 245

ATK_IP6_SYN_FLOOD_SZ· 246

ATK_IP6_SYNACK_FLOOD·· 246

ATK_IP6_SYNACK_FLOOD_SZ· 247

ATK_IP6_TCP_ALLFLAGS· 247

ATK_IP6_TCP_ALLFLAGS_RAW·· 248

ATK_IP6_TCP_ALLFLAGS_RAW_SZ· 248

ATK_IP6_TCP_ALLFLAGS_SZ· 249

ATK_IP6_TCP_FINONLY· 250

ATK_IP6_TCP_FINONLY_RAW·· 250

ATK_IP6_TCP_FINONLY_RAW_SZ· 251

ATK_IP6_TCP_FINONLY_SZ· 251

ATK_IP6_TCP_INVALIDFLAGS· 252

ATK_IP6_TCP_INVALIDFLAGS_RAW·· 253

ATK_IP6_TCP_INVALIDFLAGS_RAW_SZ· 254

ATK_IP6_TCP_INVALIDFLAGS_SZ· 255

ATK_IP6_TCP_LAND·· 256

ATK_IP6_TCP_LAND_RAW·· 256

ATK_IP6_TCP_LAND_RAW_SZ· 257

ATK_IP6_TCP_LAND_SZ· 257

ATK_IP6_TCP_NULLFLAG·· 258

ATK_IP6_TCP_NULLFLAG_RAW·· 258

ATK_IP6_TCP_NULLFLAG_RAW_SZ· 259

ATK_IP6_TCP_NULLFLAG_SZ· 259

ATK_IP6_TCP_SYNFIN· 260

ATK_IP6_TCP_SYNFIN_RAW·· 260

ATK_IP6_TCP_SYNFIN_RAW_SZ· 261

ATK_IP6_TCP_SYNFIN_SZ· 261

ATK_IP6_TCP_WINNUKE· 262

ATK_IP6_TCP_WINNUKE_RAW·· 263

ATK_IP6_TCP_WINNUKE_RAW_SZ· 264

ATK_IP6_TCP_WINNUKE_SZ· 265

ATK_IP6_UDP_FLOOD·· 265

ATK_IP6_UDP_FLOOD_SZ· 266

ATK_IP6_UDP_FRAGGLE· 266

ATK_IP6_UDP_FRAGGLE_RAW·· 267

ATK_IP6_UDP_FRAGGLE_RAW_SZ· 267

ATK_IP6_UDP_FRAGGLE_SZ· 268

ATK_IP6_UDP_SNORK· 269

ATK_IP6_UDP_SNORK_RAW·· 269

ATK_IP6_UDP_SNORK_RAW_SZ· 270

ATK_IP6_UDP_SNORK_SZ· 270

ATK_IPOPT_ABNORMAL· 271

ATK_IPOPT_ABNORMAL_RAW·· 272

ATK_IPOPT_ABNORMAL_RAW_SZ· 273

ATK_IPOPT_ABNORMAL_SZ· 274

ATK_IPOPT_LOOSESRCROUTE· 275

ATK_IPOPT_LOOSESRCROUTE_RAW·· 276

ATK_IPOPT_LOOSESRCROUTE_RAW_SZ· 277

ATK_IPOPT_LOOSESRCROUTE_SZ· 278

ATK_IPOPT_RECORDROUTE· 279

ATK_IPOPT_RECORDROUTE_RAW·· 280

ATK_IPOPT_RECORDROUTE_RAW_SZ· 281

ATK_IPOPT_RECORDROUTE_SZ· 282

ATK_IPOPT_ROUTEALERT· 283

ATK_IPOPT_ROUTEALERT_RAW·· 284

ATK_IPOPT_ROUTEALERT_RAW_SZ· 285

ATK_IPOPT_ROUTEALERT_SZ· 286

ATK_IPOPT_SECURITY· 287

ATK_IPOPT_SECURITY_RAW·· 288

ATK_IPOPT_SECURITY_RAW_SZ· 289

ATK_IPOPT_SECURITY_SZ· 290

ATK_IPOPT_STREAMID·· 291

ATK_IPOPT_STREAMID_RAW·· 292

ATK_IPOPT_STREAMID_RAW_SZ· 293

ATK_IPOPT_STREAMID_SZ· 294

ATK_IPOPT_STRICTSRCROUTE· 295

ATK_IPOPT_STRICTSRCROUTE_RAW·· 296

ATK_IPOPT_STRICTSRCROUTE_RAW_SZ· 297

ATK_IPOPT_STRICTSRCROUTE_SZ· 298

ATK_IPOPT_TIMESTAMP· 299

ATK_IPOPT_TIMESTAMP_RAW·· 300

ATK_IPOPT_TIMESTAMP_RAW_SZ· 301

ATK_IPOPT_TIMESTAMP_SZ· 302

ATK_IPV6_EXT_HEADER· 303

ATK_IPV6_EXT_HEADER _RAW·· 304

ATK_IPV6_EXT_HEADER_RAW_SZ· 304

ATK_IPV6_EXT_HEADER_SZ· 305

ATM·· 305

ATM_PVCDOWN· 306

ATM_PVCUP· 307

AUDIT messages· 307

AUDIT_RULE_MATCH_IM_IPV4_LOG·· 308

AUDIT_RULE_MATCH_MAIL_IPV4_LOG·· 309

AUDIT_RULE_MATCH_FORUM_IPV4_LOG·· 310

AUDIT_RULE_MATCH_SEARCH_IPV4_LOG·· 311

AUDIT_RULE_MATCH_FILE_IPV4_LOG·· 312

AUDIT_RULE_MATCH_AS_IPV4_LOG·· 313

AUDIT_RULE_MATCH_OTHER_IPV4_LOG·· 314

AUDIT_RULE_MATCH_IM_IPV6_LOG·· 315

AUDIT_RULE_MATCH_MAIL_IPV6_LOG·· 316

AUDIT_RULE_MATCH_FORUM_IPV6_LOG·· 317

AUDIT_RULE_MATCH_SEARCH_IPV6_LOG·· 318

AUDIT_RULE_MATCH_FILE_IPV6_LOG·· 319

AUDIT_RULE_MATCH_AS_IPV6_LOG·· 320

AUDIT_RULE_MATCH_OTHER_IPV6_LOG·· 321

AUTOCFG messages· 321

AUTOCFG_URL_EXECUTE_FAILURE· 322

AUTOCFG_URL_EXECUTE_SUCCESS· 322

AUTOCFG_URL_START_FAILED·· 323

AUTOCFG_URL_START_SUCCESS· 323

AVC messages· 323

AVC_MATCH_IPV4_LOG·· 324

AVC_MATCH_IPV6_LOG·· 325

AVC_THRESHOLDWARNING_FASTLOGGING_FMT· 326

AVC_THRESHOLDWARNING_FASTLOGGING_IPV6FMT· 327

BFD messages· 327

BFD_CHANGE_FSM·· 328

BFD_REACHED_UPPER_LIMIT· 328

BGP messages· 328

BGP_EXCEED_ROUTE_LIMIT· 329

BGP_REACHED_THRESHOLD·· 329

BGP_MEM_ALERT· 330

BGP_PEER_LICENSE_REACHED·· 330

BGP_ROUTE_LICENSE_REACHED·· 330

BGP_STATE_CHANGED·· 331

BLS messages· 331

BLS_DIP_BLOCK· 331

BLS_DIPV6_BLOCK· 332

BLS_ENTRY_ADD·· 332

BLS_ENTRY_DEL· 333

BLS_IP_BLOCK· 333

BLS_IPV6_BLOCK· 334

BLS_IPV6_ENTRY_ADD·· 334

BLS_IPV6_ENTRY_DEL· 335

BLS_ENTRY_USER_ADD·· 335

BLS_ENTRY_USER_DEL· 336

BLS_USER_IP_BLOCK· 336

BLS_USER_IPV6_BLOCK· 337

CC defense messages· 337

CC_DEFENSE_MATCH_IPV4_LOG·· 338

CC_DEFENSE_MATCH_IPV6_LOG·· 339

CFD messages· 339

CFD_CROSS_CCM·· 340

CFD_ERROR_CCM·· 340

CFD_REACH_LOWERLIMIT· 341

CFD_REACH_UPPERLIMIT· 341

CFD_LOST_CCM·· 342

CFD_RECEIVE_CCM·· 342

CFGLOG messages· 343

CFGLOG_CFGOPERATE· 343

CFGMAN messages· 343

CFGMAN_ARCHIVE_FAIL· 344

CFGMAN_CFGCHANGED·· 345

CFGMAN_OPTCOMPLETION· 346

CFGMAN_REPLACE_CANCEL· 347

CFGMAN_REPLACE_FAIL· 347

CFGMAN_REPLACE_SOON· 348

CGROUP messages· 348

CGROUP_STATUS_CHANGE· 348

CONNLMT messages· 348

CONNLMT_IPV4_OVERLOAD·· 349

CONNLMT_IPV4_RECOVER· 350

CONNLMT_IPV6_OVERLOAD·· 351

CONNLMT_IPV6_RECOVER· 352

CONNLMT_IPV4_RATELIMIT· 353

CONNLMT_IPV6_RATELIMIT· 354

CONTEXT messages· 354

CAR_MODIFY· 355

CAR_DESTROY· 355

SIB_BROADCAST_DROP· 356

SIB_MULTICAST_DROP· 356

DAC·· 356

DAC_STORE_STATE_STOREFULL· 357

DAC_STORE_STATE_FULL· 357

DAC_STORE_DELETE_FILE· 358

DAC_HDD_FULL· 358

DEV messages· 358

BOARD_REBOOT· 359

BOARD_REMOVED·· 360

BOARD_STATE_FAULT· 361

BOARD_STATE_NORMAL· 363

CFCARD_INSERTED·· 363

CFCARD_REMOVED·· 364

CHASSIS_REBOOT· 365

DEV_CLOCK_CHANGE· 366

DEV_FAULT_TOOLONG·· 367

FAN_ABSENT· 368

FAN_DIRECTION_NOT_PREFERRED·· 369

FAN_FAILED·· 370

FAN_RECOVERED·· 371

MAD_ DETECT· 372

POWER_ABSENT· 373

POWER_FAILED·· 374

POWER_FAILED_SHUTDOWN· 375

POWER_MONITOR_ABSENT· 376

POWER_MONITOR_FAILED·· 377

POWER_MONITOR_RECOVERED·· 378

POWER_RECOVERED·· 379

RPS_ABSENT· 380

RPS_NORMAL· 381

SUBCARD_FAULT· 382

SUBCARD_INSERTED·· 383

SUBCARD_REBOOT· 384

SUBCARD_REMOVED·· 386

SYSTEM_REBOOT· 387

TEMPERATURE_ALARM·· 388

TEMPERATURE_LOW·· 390

TEMPERATURE_NORMAL· 392

TEMPERATURE_SHUTDOWN· 393

TEMPERATURE_WARNING·· 395

TIMER_CREATE_FAILED_FIRST· 397

TIMER_CREATE_FAILED_MORE· 398

VCHK_VERSION_INCOMPATIBLE· 399

DFILTER messages· 399

DFILTER_IPV4_LOG·· 400

DFILTER_IPV6_LOG·· 401

DHCP·· 401

DHCP_NOTSUPPORTED·· 402

DHCP_NORESOURCES· 402

DHCPS messages· 402

DHCPS_ALLOCATE_IP· 403

DHCPS_CONFLICT_IP· 403

DHCPS_EXTEND_IP· 404

DHCPS_FILE· 404

DHCPS_RECLAIM_IP· 404

DHCPS_VERIFY_CLASS· 405

DHCPS6 messages· 405

DHCPS6_ALLOCATE_ADDRESS· 405

DHCPS6_ALLOCATE_PREFIX· 406

DHCPS6_CONFLICT_ADDRESS· 406

DHCPS6_EXTEND_ADDRESS· 407

DHCPS6_EXTEND_PREFIX· 407

DHCPS6_FILE· 408

DHCPS6_RECLAIM_ADDRESS· 408

DHCPS6_RECLAIM_PREFIX· 409

DHCPSP4· 409

DHCPSP4_FILE· 409

DHCPSP6· 409

DHCPSP6_FILE· 410

DIAG messages· 410

CORE_EXCEED_THRESHOLD·· 410

CORE_RECOVERY· 411

CPU_USAGE_LASTMINUTE· 411

DIAG_DEADLOOP_DETECT· 411

DIAG_STORAGE_BELOW_THRESHOLD·· 412

DIAG_STORAGE_EXCEED_THRESHOLD·· 412

MEM_ALERT· 413

MEM_BELOW_THRESHOLD·· 414

MEM_EXCEED_THRESHOLD·· 414

MEM_USAGE· 415

DLDP messages· 415

DLDP_AUTHENTICATION_FAILED·· 415

DLDP_LINK_BIDIRECTIONAL· 415

DLDP_LINK_UNIDIRECTIONAL· 416

DLDP_NEIGHBOR_AGED·· 416

DLDP_NEIGHBOR_CONFIRMED·· 416

DLDP_NEIGHBOR_DELETED·· 417

DOT1X messages· 417

DOT1X_LOGIN_FAILURE· 418

DOT1X_LOGIN_SUCC· 419

DOT1X_LOGOFF· 420

DOT1X_NOTENOUGH_EADFREEIP_RES· 421

DOT1X_NOTENOUGH_EADFREERULE_RES· 421

DOT1X_NOTENOUGH_EADPORTREDIR_RES· 421

DOT1X_NOTENOUGH_EADMACREDIR_RES· 422

DOT1X_NOTENOUGH_ENABLEDOT1X_RES· 422

DOT1X_NOTSUPPORT_EADFREEIP_RES· 422

DOT1X_NOTSUPPORT_EADFREERULE_RES· 423

DOT1X_NOTSUPPORT_EADMACREDIR_RES· 423

DOT1X_NOTSUPPORT_EADPORTREDIR_RES· 423

DOT1X_UNICAST_NOT_EFFECTIVE· 424

DOT1X_WLAN_LOGIN_FAILURE· 425

DOT1X_WLAN_LOGIN_SUCC· 426

DOT1X_WLAN_LOGOFF· 427

EDEV messages· 428

EDEV_FAILOVER_GROUP_STATE_CHANGE· 428

EIGRP messages· 428

RID_CHANGE· 429

PEER_CHANGE· 429

ERPS messages· 430

ERPS_STATE_CHANGED·· 430

ETHOAM messages· 430

ETHOAM_CONNECTION_FAIL_DOWN· 431

ETHOAM_CONNECTION_FAIL_TIMEOUT· 431

ETHOAM_CONNECTION_FAIL_UNSATISF· 431

ETHOAM_CONNECTION_SUCCEED·· 432

ETHOAM_DISABLE· 432

ETHOAM_DISCOVERY_EXIT· 432

ETHOAM_ENABLE· 433

ETHOAM_ENTER_LOOPBACK_CTRLLED·· 433

ETHOAM_ENTER_LOOPBACK_CTRLLING·· 433

ETHOAM_LOCAL_DYING_GASP· 434

ETHOAM_LOCAL_ERROR_FRAME· 434

ETHOAM_LOCAL_ERROR_FRAME_PERIOD·· 434

ETHOAM_LOCAL_ERROR_FRAME_SECOND·· 435

ETHOAM_LOCAL_LINK_FAULT· 435

ETHOAM_LOOPBACK_EXIT· 435

ETHOAM_LOOPBACK_EXIT_ERROR_STATU· 436

ETHOAM_LOOPBACK_NO_RESOURCE· 436

ETHOAM_LOOPBACK_NOT_SUPPORT· 436

ETHOAM_QUIT_LOOPBACK_CTRLLED·· 437

ETHOAM_QUIT_LOOPBACK_CTRLLING·· 437

ETHOAM_REMOTE_CRITICAL· 437

ETHOAM_REMOTE_DYING_GASP· 438

ETHOAM_REMOTE_ERROR_FRAME· 438

ETHOAM_REMOTE_ERROR_FRAME_PERIOD·· 438

ETHOAM_REMOTE_ERROR_FRAME_SECOND·· 439

ETHOAM_REMOTE_ERROR_SYMBOL· 439

ETHOAM_REMOTE_EXIT· 439

ETHOAM_REMOTE_FAILURE_RECOVER· 440

ETHOAM_REMOTE_LINK_FAULT· 440

ETHOAM_NO_ENOUGH_RESOURCE· 440

ETHOAM_NOT_CONNECTION_TIMEOUT· 441

EVB messages· 441

EVB_AGG_FAILED·· 441

EVB_LICENSE_EXPIRE· 441

EVB_VSI_OFFLINE· 442

EVB_VSI_ONLINE· 442

EVIISIS messages· 442

EVIISIS_LICENSE· 443

EVIISIS_NBR_CHG·· 444

FCLINK messages· 444

FCLINK_FDISC_REJECT_NORESOURCE· 445

FCLINK_FLOGI_REJECT_NORESOURCE· 445

FCOE messages· 445

FCOE_INTERFACE_NOTSUPPORT_FCOE· 446

FCZONE messages· 446

FCZONE_HARDZONE_DISABLED·· 446

FCZONE_HARDZONE_ENABLED·· 447

FCZONE_ISOLATE_NEIGHBOR· 447

FCZONE_ISOLATE_ALLNEIGHBOR· 448

FCZONE_ISOLATE_CLEAR_VSAN· 448

FCZONE_ISOLATE_CLEAR_ALLVSAN· 449

FCZONE_DISTRIBUTE_FAILED·· 450

File filtering messages· 450

FFILTER_IPV4_LOG·· 451

FFILTER_IPV6_LOG·· 452

FILTER messages· 452

FILTER_EXECUTION_ICMP· 453

FILTER_EXECUTION_ICMPV6· 454

FILTER_IPV4_EXECUTION· 455

FILTER_IPV6_EXECUTION· 456

FILTER_ZONE_IPV4_EXECUTION· 457

FILTER_ZONE_IPV4_EXECUTION· 458

FILTER_ZONE_IPV4_EXECUTION· 459

FILTER_ZONE_IPV6_EXECUTION· 460

FILTER_ZONE_IPV6_EXECUTION· 461

FILTER_ZONE_IPV6_EXECUTION· 462

FILTER_ZONE_EXECUTION_ICMP· 463

FILTER_ZONE_EXECUTION_ICMP· 464

FILTER_ZONE_EXECUTION_ICMP· 465

FILTER_ZONE_EXECUTION_ICMPV6· 466

FILTER_ZONE_EXECUTION_ICMPV6· 467

FILTER_ZONE_EXECUTION_ICMPV6· 468

FIPSNG messages· 468

FIPSNG_HARD_RESOURCE_NOENOUGH· 468

FIPSNG_HARD_RESOURCE_RESTORE· 469

FS messages· 469

FS_UNFORMATTED_PARTITION· 469

FTP messages· 469

FTP_ACL_DENY· 470

FTP_REACH_SESSION_LIMIT· 470

GLB messages· 470

GLB_SYNCGROUP_CMD_DENY· 471

GLB_SYNCGROUP_MEM_DISCONNECT· 471

GLB_SYNCGROUP_MEM_DISCONNECT· 471

GLB_SYNCGROUP_MEM_DISCONNECT· 472

GLB_SYNCGROUP_MEM_DISCONNECT· 472

GLB_SYNCGROUP_MEM_DISCONNECT· 472

GLB_SYNCGROUP_MEM_CONNECT· 473

GLB_SYNCGROUP_MEM_DISCONNECT· 473

GLB_SYNCGROUP_SYNC_CONFLICT· 473

gRPC·· 474

GRPC_ENABLE_WITHOUT_TLS· 474

HA messages· 474

HA_BATCHBACKUP_FINISHED·· 474

HA_BATCHBACKUP_STARTED·· 475

HA_STANDBY_NOT_READY· 475

HA_STANDBY_TO_MASTER· 475

HQOS messages· 475

HQOS_DP_SET_FAIL· 476

HQOS_FP_SET_FAIL· 476

HQOS_POLICY_APPLY_FAIL· 477

HQOS_POLICY_APPLY_FAIL· 477

HTTPD messages· 477

HTTPD_CONNECT· 478

HTTPD_CONNECT_TIMEOUT· 478

HTTPD_DISCONNECT· 478

HTTPD_FAIL_FOR_ACL· 479

HTTPD_FAIL_FOR_ACP· 479

HTTPD_REACH_CONNECT_LIMIT· 479

Identity messages· 480

IDENTITY_AUTO_IMPORT_FINISHED·· 480

IDENTITY_AUTO_IMPORT_START· 480

IDENTITY_CSV_IMPORT_FAILED·· 480

IDENTITY_IMC_IMPORT_FAILED_NO_MEMORY· 481

IDENTITY_LDAP_IMPORT_FAILED_NO_MEMORY· 481

IDENTITY_LDAP_IMPORT_GROUP_FAILED·· 482

IDENTITY_LDAP_IMPORT_USER_FAILED·· 482

IFNET messages· 482

IF_JUMBOFRAME_WARN· 483

INTERFACE_NOTSUPPRESSED·· 484

INTERFACE_SUPPRESSED·· 485

LINK_UPDOWN· 486

PHY_UPDOWN· 487

PROTOCOL_UPDOWN· 488

TUNNEL_LINK_UPDOWN· 489

TUNNEL_PHY_UPDOWN· 490

VLAN_MODE_CHANGE· 490

IKE messages· 491

IKE_P1_SA_ESTABLISH_FAIL· 492

IKE_P1_SA_TERMINATE· 495

IKE_P2_SA_ESTABLISH_FAIL· 497

IKE_P2_SA_TERMINATE· 500

IKE_XAUTH_FAILE· 502

IMA·· 503

IMA_ALLOCATE_FAILED·· 504

IMA_DATA_ERROR· 504

IMA_FILE_HASH_FAILED·· 504

IMA_RM_FILE_MISS· 505

IMA_RM_HASH_MISS· 505

IMA_TEMPLATE_ERROR· 505

IP6ADDR messages· 505

IP6ADDR_CREATEADDRESS_ERROR· 506

IP6ADDR_CREATEADDRESS_FAIL· 506

IPADDR messages· 507

IPADDR_CREATEADDRESS_FAIL· 507

IPADDR_HA_EVENT_ERROR· 508

IPADDR_HA_STOP_EVENT· 509

IPoE messages· 509

IPoE_USER_LOGON_SUCCESS· 509

IPoE_USER_LOGON_FAILED·· 510

IPoE_USER_LOGOFF_NORMAL· 511

IPoE_USER_LOGOFF_ABNORMAL· 512

IPREPUTATION messages· 513

IPREPUTATION_MATCH_IPV4_LOG·· 514

IPREPUTATION_MATCH_IPV6_LOG·· 515

IPS messages· 515

IPS_IPV4_INTERZONE· 516

IPS_IPV6_INTERZONE· 518

IPS_WARNING·· 519

IPS_WARNING·· 519

IPS_WARNING·· 520

IPSEC messages· 520

IPSEC_FAILED_ADD_FLOW_TABLE· 520

IPSEC_PACKET_DISCARDED·· 521

IPSEC_SA_ESTABLISH· 522

IPSEC_SA_ESTABLISH_FAIL· 524

IPSEC_SA_INITIATION· 528

IPSEC_SA_TERMINATE· 529

IPSEC_ANTI-REPLAY_WINDOWS_ERROR· 531

IPSG messages· 532

IPSG_ADDENTRY_ERROR· 532

IPSG_DELENTRY_ERROR· 533

IRDP messages· 533

IRDP_EXCEED_ADVADDR_LIMIT· 533

IRF· 534

IRF_LINK_BLOCK· 534

IRF_LINK_DOWN· 534

IRF_LINK_UP· 534

IRF_MEMBER_LEFT· 535

IRF_MEMBERID_CONFLICT· 535

IRF_MEMBERID_CONFLICT_REBOOT· 535

IRF_MERGE· 536

IRF_MERGE_NEED_REBOOT· 536

IRF_MERGE_NOT_NEED_REBOOT· 536

IRF_NEWMEMBER_JOIN· 537

ISIS messages· 537

ISIS_MEM_ALERT· 537

ISIS_NBR_CHG·· 537

ISSU messages· 538

ISSU_ROLLBACKCHECKNORMAL· 538

ISSU_SWITCHOVER· 539

ISSU_UPGRADE· 540

KDNS messages· 540

KDNS_BIND_PORT_ALLOCETED·· 541

KHTTP messages· 541

KHTTP_BIND_PORT_ALLOCETED·· 541

KHTTP_BIND_ADDRESS_INUSED·· 542

L2PT messages· 542

L2PT_SET_MULTIMAC_FAILED·· 542

L2PT_CREATE_TUNNELGROUP_FAILED·· 542

L2PT_ADD_GROUPMEMBER_FAILED·· 543

L2PT_ENABLE_DROP_FAILED·· 543

L2TPv2 messages· 543

L2TPV2_TUNNEL_EXCEED_LIMIT· 543

L2TPV2_SESSION_EXCEED_LIMIT· 544

L2VPN messages· 544

L2VPN_BGPVC_CONFLICT_LOCAL· 544

L2VPN_BGPVC_CONFLICT_REMOTE· 545

L2VPN_HARD_RESOURCE_NOENOUGH· 545

L2VPN_HARD_RESOURCE_RESTORE· 545

L2VPN_LABEL_DUPLICATE· 546

LAGG messages· 546

LAGG_ACTIVE· 546

LAGG_INACTIVE_AICFG·· 547

LAGG_INACTIVE_BFD·· 547

LAGG_INACTIVE_CONFIGURATION· 548

LAGG_INACTIVE_DUPLEX· 548

LAGG_INACTIVE_HARDWAREVALUE· 549

LAGG_INACTIVE_LOWER_LIMIT· 549

LAGG_INACTIVE_PARTNER· 549

LAGG_INACTIVE_PHYSTATE· 550

LAGG_INACTIVE_RESOURCE_INSUFICIE· 550

LAGG_INACTIVE_SPEED·· 550

LAGG_INACTIVE_UPPER_LIMIT· 551

LB messages· 551

LB_CHANGE_DEFAULTLG_STATE_VS· 551

LB_CHANGE_DEFAULTSF_STATE_VS· 552

LB_CHANGE_LG_STATE_ACTION· 552

LB_CHANGE_LG_STATUS· 553

LB_CHANGE_LINK_BUSY_STATUS· 553

LB_CHANGE_LINK_BUSYSTATUS· 553

LB_CHANGE_LINK_CONNNUM_OVER· 554

LB_CHANGE_LINK_CONNNUM_RECOVERY· 554

LB_CHANGE_LINK_CONNRATE_OVER· 555

LB_CHANGE_LINK_CONNRATE_RECOVERY· 555

LB_CHANGE_LINK_HCSTATUS· 556

LB_CHANGE_LINK_MEMORY_ALERT· 556

LB_CHANGE_LINK_PROBERESULT· 556

LB_CHANGE_LINK_SHUTDOWN· 557

LB_CHANGE_LINKQUOTE_CONNNUM_OVER· 557

LB_CHANGE_LINKQUOTE_CONNNUM_RECOVERY· 558

LB_CHANGE_LINKQUOTE_CONNRATE_OVER· 558

LB_CHANGE_LINKQUOTE_CONNRATE_RECOVERY· 559

LB_CHANGE_LINKQUOTE_HCSTATUS· 559

LB_CHANGE_LINKQUOTE_PROBERESULT· 560

LB_CHANGE_RS_CONNNUM_OVER· 560

LB_CHANGE_RS_CONNNUM_RECOVERY· 561

LB_CHANGE_RS_CONNRATE_OVER· 561

LB_CHANGE_RS_CONNRATE_RECOVERY· 562

LB_CHANGE_RS_HCSTATUS· 562

LB_CHANGE_RS_MEMORY_ALERT· 562

LB_CHANGE_RS_MONITORRESULT· 563

LB_CHANGE_RS_PROBERESULT· 563

LB_CHANGE_RS_SHUTDOWN· 564

LB_CHANGE_RSQUOTE_CONNNUM_OVER· 564

LB_CHANGE_RSQUOTE_CONNNUM_RECOVERY· 565

LB_CHANGE_RSQUOTE_CONNRATE_OVER· 565

LB_CHANGE_RSQUOTE_CONNRATE_RECOVERY· 566

LB_CHANGE_RSQUOTE_HCSTATUS· 566

LB_CHANGE_RSQUOTE_PROBERESULT· 567

LB_CHANGE_SF_STATE_ACTION· 567

LB_CHANGE_SF_STATUS· 568

LB_CHANGE_VS_CONNNUM_OVER· 568

LB_CHANGE_VS_CONNNUM_RECOVERY· 569

LB_CHANGE_VS_CONNRATE_OVER· 569

LB_CHANGE_VS_CONNRATE_RECOVERY· 570

LB_LINK_STATE_ACTIVE· 570

LB_LINK_STATE_INACTIVE· 570

LB_NAT44_FLOW·· 571

LB_NAT46_FLOW·· 572

LB_NAT64_FLOW·· 573

LB_NAT66_FLOW·· 574

LB_PROTECTION_POLICY_CK (fast log output) 574

LB_PROTECTION_POLICY_IP (fast log output) 575

LB_SLB_LICENSE_EXPIRED·· 575

LB_SLB_LICENSE_INSTALLED·· 575

LB_SLB_LICENSE_UNINSTALLED·· 576

LDP messages· 576

LDP_MPLSLSRID_CHG·· 576

LDP_SESSION_CHG·· 577

LDP_SESSION_GR· 578

LDP_SESSION_SP· 578

LLDP messages· 579

LLDP_CREATE_NEIGHBOR· 579

LLDP_DELETE_NEIGHBOR· 579

LLDP_LESS_THAN_NEIGHBOR_LIMIT· 580

LLDP_NEIGHBOR_AGE_OUT· 580

LLDP_NEIGHBOR_AP_RESET· 581

LLDP_PVID_INCONSISTENT· 581

LLDP_REACH_NEIGHBOR_LIMIT· 582

LOAD messages· 582

BOARD_LOADING·· 582

LOAD_FAILED·· 583

LOAD_FINISHED·· 583

LOGIN messages· 583

LOGIN_FAILED·· 584

LOGIN_ INVALID_USERNAME_PWD·· 584

LPDT messages· 584

LPDT_LOOPED·· 584

LPDT_RECOVERED·· 585

LPDT_VLAN_LOOPED·· 585

LPDT_VLAN_RECOVERED·· 585

LS messages· 585

LOCALSVR_PROMPTED_CHANGE_PWD·· 586

LS_ADD_USER_TO_GROUP· 586

LS_AUTHEN_FAILURE· 587

LS_AUTHEN_SUCCESS· 587

LS_DEL_USER_FROM_GROUP· 588

LS_DELETE_PASSWORD_FAIL· 588

LS_PWD_ADDBLACKLIST· 589

LS_PWD_CHGPWD_FOR_AGEDOUT· 589

LS_PWD_CHGPWD_FOR_AGEOUT· 590

LS_PWD_CHGPWD_FOR_COMPOSITION· 590

LS_PWD_CHGPWD_FOR_FIRSTLOGIN· 591

LS_PWD_CHGPWD_FOR_LENGTH· 591

LS_PWD_FAILED2WRITEPASS2FILE· 591

LS_PWD_MODIFY_FAIL· 592

LS_PWD_MODIFY_SUCCESS· 593

LS_REAUTHEN_FAILURE· 593

LS_UPDATE_PASSWORD_FAIL· 594

LS_USER_CANCEL· 594

LS_USER_PASSWORD_EXPIRE· 595

LS_USER_ROLE_CHANGE· 595

LSPV messages· 595

LSPV_PING_STATIS_INFO·· 596

MAC messages· 596

MAC_TABLE_FULL_GLOBAL· 596

MAC_TABLE_FULL_PORT· 597

MAC_TABLE_FULL_VLAN· 597

MACA messages· 597

MACA_ENABLE_NOT_EFFECTIVE· 598

MACA_LOGIN_FAILURE· 599

MACA_LOGIN_SUCC· 601

MACA_LOGOFF· 603

MACSEC messages· 604

MACSEC_MKA_KEEPALIVE_TIMEOUT· 604

MACSEC_MKA_PRINCIPAL_ACTOR· 605

MACSEC_MKA_SAK_REFRESH· 605

MACSEC_MKA_SESSION_REAUTH· 605

MACSEC_MKA_SESSION_SECURED·· 606

MACSEC_MKA_SESSION_START· 606

MACSEC_MKA_SESSION_STOP· 607

MACSEC_MKA_SESSION_UNSECURED·· 607

MBFD messages· 608

MBFD_TRACEROUTE_FAILURE· 608

MBUF messages· 608

DBL_FREE· 609

MBUF_DATA_BLOCK_CREATE_FAIL· 610

STEPMEM·· 611

MDC messages· 611

MDC_CREATE_ERR· 612

MDC_CREATE· 612

MDC_DELETE· 612

MDC_KERNEL_EVENT_TOOLONG·· 613

MDC_LICENSE_EXPIRE· 613

MDC_NO_FORMAL_LICENSE· 613

MDC_NO_LICENSE_EXIT· 614

MDC_OFFLINE· 614

MDC_ONLINE· 614

MDC_STATE_CHANGE· 615

MFIB messages· 615

MFIB_MEM_ALERT· 615

MGROUP messages· 615

MGROUP_APPLY_SAMPLER_FAIL· 616

MGROUP_RESTORE_CPUCFG_FAIL· 617

MGROUP_RESTORE_IFCFG_FAIL· 618

MGROUP_SYNC_CFG_FAIL· 619

MPLS messages· 619

MPLS_HARD_RESOURCE_NOENOUGH· 619

MPLS_HARD_RESOURCE_RESTORE· 620

MTLK messages· 620

MTLK_UPLINK_STATUS_CHANGE· 620

NAT messages· 620

NAT_ADDR_BIND_CONFLICT· 621

NAT_ADDRGRP_MEMBER_CONFLICT· 622

NAT_ADDRGRP_RESOURCE_EXHAUST· 623

NAT_FAILED_ADD_FLOW_RULE· 624

NAT_FAILED_ADD_FLOW_TABLE· 625

NAT_FLOW·· 626

NAT_INTERFACE_RESOURCE_EXHAUST· 628

NAT_NOPAT_IP_USAGE_ALARM·· 629

NAT_PORTBLOCKGRP_ADDRESS_WARNING·· 630

NAT_SERVER_INVALID·· 631

NAT_SERVICE_CARD_RECOVER_FAILURE· 632

NAT444_PORTBLOCK_USAGE_ALARM·· 633

ND messages· 633

ND_CONFLICT· 634

ND_DUPADDR· 634

ND_HOST_IP_CONFLICT· 635

ND_MAC_CHECK· 635

ND_SET_PORT_TRUST_NORESOURCE· 635

ND_SET_VLAN_REDIRECT_NORESOURCE· 636

ND_MAXNUM_IF· 636

ND_MAXNUM_DEV· 636

NETCONF messages· 636

CLI 637

EDIT-CONFIG·· 638

NETCONF_MSG_DEL· 639

ROW-OPERATION· 640

REPLY· 641

THREAD·· 641

NETSHARE messages· 641

NETSHARE_IPV4_LOG·· 642

NETSHARE_IPV4_LOG·· 642

NETSHARE_IPV6_LOG·· 643

NETSHARE_IPV6_LOG·· 643

NETSHARE_IPV4_BLS_LOG·· 644

NETSHARE_IPV6_BLS_LOG·· 644

NQA messages· 644

NQA_ENTRY_PROBE_RESULT· 645

NQA_LOG_UNREACHABLE· 646

NQA_SCHEDULE_FAILURE· 646

NQA_SET_DRIVE_FAIL· 647

NQA_SEVER_FAILURE· 648

NQA_START_FAILURE· 649

NQA_TWAMP_LIGHT_PACKET_INVALID·· 650

NQA_TWAMP_LIGHT_REACTION· 651

NQA_TWAMP_LIGHT_START_FAILURE· 652

NTP messages· 653

NTP_CLOCK_CHANGE· 653

NTP_LEAP_CHANGE· 653

NTP_SOURCE_CHANGE· 654

NTP_SOURCE_LOST· 654

NTP_STRATUM_CHANGE· 655

OBJP messages· 655

OBJP_ACCELERATE_NO_RES· 655

OBJP_ACCELERATE_NOT_SUPPORT· 656

OBJP_ACCELERATE_UNK_ERR· 656

OBJP_RULE_CREATE_SUCCESS· 656

OBJP_RULE_CREATE_FAIL· 657

OBJP_RULE_UPDATE_SUCCESS· 657

OBJP_RULE_UPDATE_FAIL· 658

OBJP_RULE_DELETE_SUCCESS· 658

OBJP_RULE_DELETE_FAIL· 658

OBJP_RULE_CLRSTAT_SUCCESS· 659

OBJP_RULE_CLRSTAT_FAIL· 659

OBJP_APPLY_POLICY_FAIL· 659

OBJP_APPLAY_INFO·· 660

OFP messages· 660

OFP_ACTIVE· 660

OFP_ACTIVE_FAILED·· 660

OFP_CONNECT· 661

OFP_FAIL_OPEN· 661

OFP_FAIL_OPEN_FAILED·· 661

OFP_FLOW_ADD·· 662

OFP_FLOW_ADD_DUP· 662

OFP_FLOW_ADD_FAILED·· 663

OFP_FLOW_ADD_TABLE_MISS· 663

OFP_FLOW_ADD_TABLE_MISS_FAILED·· 664

OFP_FLOW_DEL· 664

OFP_FLOW_DEL_L2VPN_DISABLE· 664

OFP_FLOW_DEL_TABLE_MISS· 665

OFP_FLOW_DEL_TABLE_MISS_FAILED·· 665

OFP_FLOW_DEL_VSIIF_DEL· 666

OFP_FLOW_DEL_VXLAN_DEL· 666

OFP_FLOW_MOD·· 667

OFP_FLOW_MOD_FAILED·· 667

OFP_FLOW_MOD_TABLE_MISS· 668

OFP_FLOW_MOD_TABLE_MISS_FAILED·· 668

OFP_FLOW_RMV_GROUP· 668

OFP_FLOW_RMV_HARDTIME· 669

OFP_FLOW_RMV_IDLETIME· 669

OFP_FLOW_RMV_METER· 669

OFP_GROUP_ADD·· 670

OFP_GROUP_ADD_FAILED·· 670

OFP_GROUP_DEL· 670

OFP_GROUP_MOD·· 671

OFP_GROUP_MOD_FAILED·· 671

OFP_METER_ADD·· 671

OFP_METER_ADD_FAILED·· 672

OFP_METER_DEL· 672

OFP_METER_MOD·· 672

OFP_METER_MOD_FAILED·· 673

OFP_MISS_RMV_GROUP· 673

OFP_MISS_RMV_HARDTIME· 673

OFP_MISS_RMV_IDLETIME· 674

OFP_MISS_RMV_METER· 674

OPENSRC (RSYNC) messages· 674

Synchronization success· 675

Synchronization failure· 675

Synchronization error 676

OPTMOD messages· 676

BIAS_HIGH· 676

BIAS_LOW·· 677

BIAS_NORMAL· 677

CFG_ERR· 677

CHKSUM_ERR· 678

FIBER_SFPMODULE_INVALID·· 678

FIBER_SFPMODULE_NOWINVALID·· 679

IO_ERR· 679

MOD_ALM_OFF· 679

MOD_ALM_ON· 680

MODULE_IN· 680

MODULE_OUT· 680

PHONY_MODULE· 681

RX_ALM_OFF· 681

RX_ALM_ON· 681

RX_POW_HIGH· 682

RX_POW_LOW·· 682

RX_POW_NORMAL· 682

TEMP_HIGH· 683

TEMP_LOW·· 683

TEMP_NORMAL· 683

TX_ALM_OFF· 684

TX_ALM_ON· 684

TX_POW_HIGH· 684

TX_POW_LOW·· 685

TX_POW_NORMAL· 685

TYPE_ERR· 685

VOLT_HIGH· 686

VOLT_LOW·· 686

VOLT_NORMAL· 686

OSPF messages· 687

OSPF_IP_CONFLICT_INTRA· 687

OSPF_RTRID_CONFLICT_INTRA· 688

OSPF_RTRID_CONFLICT_INTER· 689

OSPF_DUP_RTRID_NBR· 690

OSPF_LAST_NBR_DOWN· 691

OSPF_MEM_ALERT· 692

OSPF_NBR_CHG·· 693

OSPF_RT_LMT· 694

OSPF_RTRID_CHG·· 694

OSPF_VLINKID_CHG·· 695

OSPFV3 messages· 695

OSPFV3_LAST_NBR_DOWN· 696

OSPFV3_MEM_ALERT· 697

OSPFV3_NBR_CHG·· 698

OSPFV3_RT_LMT· 699

PBB messages· 699

PBB_JOINAGG_WARNING·· 700

PBR messages· 700

PBR_HARDWARE_ERROR· 701

PCAPWARE messages· 701

PCAPWARE_STOP· 701

PCE messages· 702

PCE_PCEP_SESSION_CHG·· 702

PEX messages· 702

PEX_CONFIG_ERROR· 703

PEX_CONNECTION_ERROR· 704

PEX_LINK_BLOCK· 705

PEX_LINK_DOWN· 707

PEX_LINK_FORWARD·· 708

PEX_REG_JOININ· 709

PEX_REG_LEAVE· 710

PEX_REG_REQUEST· 712

PFILTER messages· 712

PFILTER_APPLYUSER_FAIL· 713

PFILTER_GLB_ RES_CONFLICT· 715

PFILTER_GLB_IPV4_DACT_NO_RES· 716

PFILTER_GLB_IPV4_DACT_UNK_ERR· 717

PFILTER_GLB_IPV6_DACT_NO_RES· 718

PFILTER_GLB_IPV6_DACT_UNK_ERR· 719

PFILTER_GLB_MAC_DACT_NO_RES· 720

PFILTER_GLB_MAC_DACT_UNK_ERR· 721

PFILTER_GLB_NO_RES· 722

PFILTER_GLB_NOT_SUPPORT· 723

PFILTER_GLB_UNK_ERR· 724

PFILTER_IF_IPV4_DACT_NO_RES· 725

PFILTER_IF_IPV4_DACT_UNK_ERR· 726

PFILTER_IF_IPV6_DACT_NO_RES· 727

PFILTER_IF_IPV6_DACT_UNK_ERR· 728

PFILTER_IF_MAC_DACT_NO_RES· 729

PFILTER_IF_MAC_DACT_UNK_ERR· 730

PFILTER_IF_NO_RES· 731

PFILTER_IF_NOT_SUPPORT· 732

PFILTER_IF_RES_CONFLICT· 733

PFILTER_IF_UNK_ERR· 734

PFILTER_IPV6_STATIS_INFO·· 735

PFILTER_STATIS_INFO·· 736

PFILTER_VLAN_IPV4_DACT_NO_RES· 737

PFILTER_VLAN_IPV4_DACT_UNK_ERR· 738

PFILTER_VLAN_IPV6_DACT_NO_RES· 739

PFILTER_VLAN_IPV6_DACT_UNK_ERR· 740

PFILTER_VLAN_MAC_DACT_NO_RES· 741

PFILTER_VLAN_MAC_DACT_UNK_ERR· 742

PFILTER_VLAN_NO_RES· 743

PFILTER_VLAN_NOT_SUPPORT· 744

PFILTER_VLAN_RES_CONFLICT· 745

PFILTER_VLAN_UNK_ERR· 746

PHYD messages· 746

DRV· 747

PIM messages· 749

PIM_NBR_DOWN· 749

PIM_NBR_UP· 749

PING messages· 750

PING_STATISTICS· 750

PING_VPN_STATISTICS· 751

PKI messages· 751

REQUEST_CERT_FAIL· 752

REQUEST_CERT_SUCCESS· 752

PKT2CPU messages· 752

PKT2CPU_NO_RESOURCE· 753

PKTCPT messages· 753

PKTCPT_AP_OFFLINE· 753

PKTCPT_AREADY_EXIT· 754

PKTCPT_CONN_FAIL· 755

PKTCPT_INVALID_FILTER· 756

PKTCPT_LOGIN_DENIED·· 756

PKTCPT_MEMORY_ALERT· 757

PKTCPT_OPEN_FAIL· 758

PKTCPT_OPERATION_TIMEOUT· 759

PKTCPT_SERVICE_FAIL· 760

PKTCPT_UNKNOWN_ERROR· 761

PKTCPT_UPLOAD_ERROR· 762

PKTCPT_WRITE_FAIL· 763

Portal messages· 763

PORTAL_USER_LOGOFF· 764

PORTAL_USER_LOGON_FAIL· 766

PORTAL_USER_LOGON_SUCCESS· 767

PORTSEC messages· 768

PORTSEC_PORTMODE_NOT_EFFECTIVE· 768

PORTSEC_NTK_NOT_EFFECTIVE· 768

POSA·· 769

POSA_TCPLISTENPORT_NOT_OPEN· 769

POSA_SERVER_ALREADYACCESS· 769

POSA_APP_CONNECT· 770

POSA_APP_RESET· 770

POSA_SERVER_NOTACCESS· 770

PPP messages· 771

IPPOOL_ADDRESS_EXHAUSTED·· 771

PPPOES_MAC_THROTTLE· 771

PPP_USER_LOGON_SUCCESS· 772

PPP_USER_LOGON_FAILED·· 772

PPP_USER_LOGOFF· 774

PPP_USER_LOGOFF_ABNORMAL· 775

PREPROVISION messages· 776

PREPROVISION_SLOT_MISMATCH· 777

PREPROVISION_SUBSLOT_MISMATCH· 777

PTS·· 778

PTS_AK_AUTH_FAILED·· 778

PTS_AK_INVALID·· 778

PTS_AK_NO_CERT· 778

PTS_AK_NO_EXIST· 779

PTS_AK_NO_LOAD·· 779

PTS_BTW_PCR_FAILED·· 779

PTS_CHECK_RM_VERSION_FAILED·· 780

PTS_CREATE_AGED_TIMER_FAILED·· 780

PTS_CREATE_CHECK_TIMER_FAILED·· 780

PTS_CREATE_CONTEXT_FAILED·· 781

PTS_CREATE_EPOLL_FAILED·· 781

PTS_CREATE_HASH_FAILED·· 781

PTS_CREATE_SELFVERIFY_COUNTER_FAILED·· 782

PTS_CREATE_SELFVERIFY_TIMER_FAILED·· 782

PTS_CREATE_SOCKET_FAILED·· 782

PTS_CREATE_TIMER_FAILED·· 783

PTS_FILE_HASH_FAILED·· 783

PTS_LOAD_KEY_FAILED·· 783

PTS_PARSE_IML_FAILED·· 784

PTS_PKG_PCR_FAILED·· 784

PTS_READ_PCR_FAILED·· 784

PTS_RM_FILE_FAILED·· 785

PTS_RUNTIME_PCR_FAILED·· 785

PTS_SELFVERIFY_FAILED·· 785

PTS_SELFVERIFY_START_FAILED·· 786

PTS_TEMPLATE_HASH_FAILED·· 786

PWDCTL messages· 786

PWDCTL_ADD_BLACKLIST· 786

PWDCTL_CHANGE_PASSWORD·· 787

PWDCTL_FAILED_TO_WRITEPWD·· 787

PWDCTL_UPDATETIME· 787

QOS messages· 787

QOS_CAR_APPLYUSER_FAIL· 788

QOS_CBWFQ_REMOVED·· 788

QOS_GTS_APPLYUSER_FAIL· 789

QOS_NOT_ENOUGH_BANDWIDTH· 789

QOS_POLICY_APPLYCOPP_CBFAIL· 790

QOS_POLICY_APPLYCOPP_FAIL· 790

QOS_POLICY_APPLYGLOBAL_CBFAIL· 791

QOS_POLICY_APPLYGLOBAL_FAIL· 791

QOS_POLICY_APPLYIF_CBFAIL· 792

QOS_POLICY_APPLYIF_FAIL· 792

QOS_POLICY_APPLYUSER_FAIL· 793

QOS_POLICY_APPLYVLAN_CBFAIL· 793

QOS_POLICY_APPLYVLAN_FAIL· 794

QOS_QMPROFILE_APPLYUSER_FAIL· 794

QOS_QMPROFILE_MODIFYQUEUE_FAIL· 795

QOS_POLICY_REMOVE· 795

QOS_POLICY_ACTIVATE· 795

RADIUS messages· 796

RADIUS_ACCT_SERVER_DOWN· 796

RADIUS_ACCT_SERVER_UP· 796

RADIUS_AUTH_FAILURE· 797

RADIUS_AUTH_SERVER_DOWN· 797

RADIUS_AUTH_SERVER_UP· 798

RADIUS_AUTH_SUCCESS· 798

RADIUS_REMOVE_SERVER_FAIL· 799

RBM messages· 799

CFG_COMPARE· 799

CFG_COMPARE· 799

CFG_COMPARE· 800

RBM_CHANNEL_BIND_FAILED·· 800

RDDC messages· 800

RDDC_ACTIVENODE_CHANGE· 801

RIP messages· 801

RIP_MEM_ALERT· 801

RIP_RT_LMT· 802

RIPNG messages· 802

RIPNG_MEM_ALERT· 802

RIPNG_RT_LMT· 803

RIR·· 803

RIR_BANDWIDTH_TOMAXIMUM·· 804

RIR_CFG_CHANGED·· 809

RIR_LINK_SELECT· 825

RIR_LINKFAULT· 828

RIR_QUALITY_DELAY· 843

RIR_QUALITY_JITTER· 848

RIR_QUALITY_OTHER· 853

RIR_QUALITY_PKTLOSS· 859

RM messages· 862

RM_ACRT_REACH_LIMIT· 862

RM_ACRT_REACH_THRESVALUE· 863

RM_THRESHLD_VALUE_REACH· 864

RPR messages· 864

RPR_EXCEED_MAX_SEC_MAC· 864

RPR_EXCEED_MAX_SEC_MAC_OVER· 865

RPR_EXCEED_MAX_STATION· 865

RPR_EXCEED_MAX_STATION_OVER· 865

RPR_EXCEED_RESERVED_RATE· 866

RPR_EXCEED_RESERVED_RATE_OVER· 866

RPR_IP_DUPLICATE· 866

RPR_IP_DUPLICATE_OVER· 867

RPR_JUMBO_INCONSISTENT· 867

RPR_JUMBO_INCONSISTENT_OVER· 867

RPR_MISCABLING·· 868

RPR_MISCABLING_OVER· 868

RPR_PROTECTION_INCONSISTENT· 868

RPR_PROTECTION_INCONSISTENT_OVER· 869

RPR_SEC_MAC_DUPLICATE· 869

RPR_SEC_MAC_DUPLICATE_OVER· 869

RPR_TOPOLOGY_INCONSISTENT· 870

RPR_TOPOLOGY_INCONSISTENT_OVER· 870

RPR_TOPOLOGY_INSTABILITY· 870

RPR_TOPOLOGY_INSTABILITY_OVER· 871

RPR_TOPOLOGY_INVALID·· 871

RPR_TOPOLOGY_INVALID_OVER· 871

RRPP messages· 871

RRPP_RING_FAIL· 872

RRPP_RING_RESTORE· 872

RTM messages· 872

RTM_TCL_NOT_EXIST· 872

RTM_TCL_MODIFY· 873

RTM_TCL_LOAD_FAILED·· 873

Sandbox messages· 873

SANDBOX_DETECTION_IPV4_LOG·· 874

SANDBOX_DETECTION_IPV6_LOG·· 876

SCD·· 879

SCD_IPV4· 879

SCMD messages· 879

PROCESS_ABNORMAL· 880

PROCESS_ACTIVEFAILED·· 881

PROCESS_CORERECORD·· 881

SCM_ABNORMAL_REBOOT· 882

SCM_ABNORMAL_REBOOTMDC· 882

SCM_ABORT_RESTORE· 883

SCM_INSMOD_ADDON_TOOLONG·· 883

SCM_KERNEL_INIT_TOOLONG·· 884

SCM_KILL_PROCESS· 885

SCM_PROCESS_STARTING_TOOLONG·· 886

SCM_PROCESS_STILL_STARTING·· 887

SCM_SKIP_PROCESS· 888

SCRLSP messages· 888

SCRLSP_LABEL_DUPLICATE· 889

SECDIAG·· 889

MONITOR_CONCURRENCY_EXCEED·· 889

MONITOR_CONCURRENCY_BELOW·· 890

MONITOR_CONNECTION_EXCEED·· 890

MONITOR_CONNECTION_BELOW·· 891

MONITOR_SECP_IPV4_EXCEED·· 891

MONITOR_SECP_IPV4_BELOW·· 891

MONITOR_SECP_IPV6_EXCEED·· 892

MONITOR_SECP_IPV6_BELOW·· 892

MONITOR_CONTEXT_EXCEED·· 892

MONITOR_CONTEXT_BELOW·· 893

MONITOR_NAT_EXCEED·· 893

MONITOR_NAT_BELOW·· 893

MONITOR_BAGG_EXCEED·· 894

MONITOR_BAGG_BELOW·· 894

MONITOR_RAGG_EXCEED·· 894

MONITOR_RAGG_BELOW·· 895

MONITOR_BLADE_THROUGHPUT_EXCEED·· 895

MONITOR_BLADE_THROUGHPUT_BELOW·· 896

MONITOR_QACL_EXCEED·· 896

MONITOR_QACL_BELOW·· 897

MONITOR_BANDWIDTH_EXCEED·· 897

MONITOR_BANDWIDTH_BELOW·· 897

SECP messages· 897

SECP_ACCELERATE_NO_RES· 898

SECP_ACCELERATE_NOT_SUPPORT· 898

SECP_ACCELERATE_UNK_ERR· 898

SECP_RULE_CREATE_SUCCESS· 899

SECP_RULE_CREATE_FAIL· 899

SECP_RULE_UPDATE_SUCCESS· 900

SECP_RULE_UPDATE_FAIL· 900

SECP_RULE_DELETE_SUCCESS· 901

SECP_RULE_DELETE_FAIL· 901

SECP_RULE_CLRSTAT_SUCCESS· 902

SECP_RULE_CLRSTAT_FAIL· 902

SESSION messages· 902

DENY_SESSION_IPV4_FLOW·· 903

DENY_SESSION_IPV6_FLOW·· 904

SESSION_IPV4_FLOW·· 905

SESSION_IPV6_FLOW·· 907

SESSION_IPV4_DNS· 908

SESSION_IPV6_DNS· 909

SFLOW messages· 909

SFLOW_HARDWARE_ERROR· 909

SHELL messages· 910

SHELL_CMD·· 910

SHELL_CMD_CONFIRM·· 910

SHELL_CMD_EXECUTEFAIL· 911

SHELL_CMD_INPUT· 911

SHELL_CMD_INPUT_TIMEOUT· 912

SHELL_CMD_MATCHFAIL· 912

SHELL_CMDDENY· 913

SHELL_CMDFAIL· 913

SHELL_COMMIT· 913

SHELL_COMMIT_DELAY· 914

SHELL_COMMIT_REDELAY· 914

SHELL_COMMIT_ROLLBACK· 914

SHELL_COMMIT_ROLLBACKDONE· 915

SHELL_COMMIT_ROLLBACKFAILED·· 915

SHELL_COMMIT_WILLROLLBACK· 915

SHELL_CRITICAL_CMDFAIL· 916

SHELL_LOGIN· 916

SHELL_LOGOUT· 916

SLSP messages· 916

SLSP_LABEL_DUPLICATE· 917

SMLK messages· 917

SMLK_LINK_SWITCH· 917

SNMP messages· 917

AGENTX· 918

SNMP_ACL_RESTRICTION· 918

SNMP_AUTHENTICATION_FAILURE· 919

SNMP_GET· 920

SNMP_INFORM_LOST· 921

SNMP_NOTIFY· 922

SNMP_SET· 924

SNMP_USM_NOTINTIMEWINDOW·· 925

SSHC messages· 925

SSHC_ALGORITHM_MISMATCH· 926

SSHS messages· 926

SSHS_ACL_DENY· 926

SSHS_ALGORITHM_MISMATCH· 927

SSHS_AUTH_EXCEED_RETRY_TIMES· 927

SSHS_AUTH_FAIL· 928

SSHS_AUTH_TIMEOUT· 928

SSHS_CONNECT· 929

SSHS_DECRYPT_FAIL· 929

SSHS_DISCONNECT· 930

SSHS_ENCRYPT_FAIL· 930

SSHS_LOG·· 931

SSHS_MAC_ERROR· 931

SSHS_REACH_SESSION_LIMIT· 932

SSHS_REACH_USER_LIMIT· 932

SSHS_SCP_OPER· 933

SSHS_SFTP_OPER· 934

SSHS_SRV_UNAVAILABLE· 934

SSHS_VERSION_MISMATCH· 935

SSL VPN messages· 935

SSLVPN_ADD_CONTENT_TYPE· 935

SSLVPN_ADD_CONTENT_TYPE_FAILED·· 935

SSLVPN_ADD_CONTEXT· 936

SSLVPN_ADD_CONTEXT_FAILED·· 936

SSLVPN_ADD_EXCROUTEITEM·· 936

SSLVPN_ADD_EXCROUTEITEM_FAILED·· 937

SSLVPN_ADD_FILEPOLICY· 937

SSLVPN_ADD_FILEPOLICY_FAILED·· 937

SSLVPN_ADD_GATEWAY· 938

SSLVPN_ADD_GATEWAY_FAILED·· 938

SSLVPN_ADD_INCROUTEITEM·· 938

SSLVPN_ADD_INCROUTEITEM_FAILED·· 939

SSLVPN_ADD_IPADDRESSPOOL· 939

SSLVPN_ADD_IPADDRESSPOOL_FAILED·· 939

SSLVPN_ADD_IPTUNNELACIF· 940

SSLVPN_ADD_IPTUNNELACIF_FAILED·· 940

SSLVPN_ADD_IPV4_RANGE· 940

SSLVPN_ADD_IPV4_RANGE_FAILED·· 941

SSLVPN_ADD_IPV6_RANGE· 941

SSLVPN_ADD_IPV6_RANGE_FAILED·· 941

SSLVPN_ADD_LOCALPORT· 942

SSLVPN_ADD_LOCALPORT_FAILED·· 942

SSLVPN_ADD_NEWCONTENT· 943

SSLVPN_ADD_NEWCONTENT_FAILED·· 943

SSLVPN_ADD_OLDCONTENT· 944

SSLVPN_ADD_OLDCONTENT_FAILED·· 944

SSLVPN_ADD_PORTFWD·· 944

SSLVPN_ADD_PORTFWD_FAILED·· 945

SSLVPN_ADD_PORTFWD_ITEM·· 945

SSLVPN_ADD_PORTFWD_ITEM_FAILED·· 945

SSLVPN_ADD_PYGROUP· 946

SSLVPN_ADD_PYGROUP_FAILED·· 946

SSLVPN_ADD_REFER_PFWDITEM·· 946

SSLVPN_ADD_REFER_PFWDITEM_FAILED·· 947

SSLVPN_ADD_REFER_SCUTLIST· 947

SSLVPN_ADD_REFERIPACL· 947

SSLVPN_ADD_REFERIPACL_FAILED·· 948

SSLVPN_ADD_REFERPORTFWD·· 948

SSLVPN_ADD_REFERPORTFWD_FAILED·· 948

SSLVPN_ADD_REFERSCUTLIST_FAILED·· 949

SSLVPN_ADD_REFERSHORTCUT· 949

SSLVPN_ADD_REFERSHORTCUT_FAILED·· 949

SSLVPN_ADD_REFERSNATPOOL· 950

SSLVPN_ADD_REFERSNATPOOL_FAILED·· 950

SSLVPN_ADD_REFERTCPACL· 950

SSLVPN_ADD_REFERTCPACL_FAILED·· 951

SSLVPN_ADD_REFERURIACL· 951

SSLVPN_ADD_REFERURIACL_FAILED·· 952

SSLVPN_ADD_REFERURLLIST· 952

SSLVPN_ADD_REFERURLLIST_FAILED·· 953

SSLVPN_ADD_REFERWEBACL· 953

SSLVPN_ADD_REFERWEBACL_FAILED·· 953

SSLVPN_ADD_REWRITE_RULE· 954

SSLVPN_ADD_REWRITE_RULE_FAILED·· 954

SSLVPN_ADD_ROUTELIST· 954

SSLVPN_ADD_ROUTELIST_FAILED·· 955

SSLVPN_ADD_ROUTEREFER· 955

SSLVPN_ADD_ROUTEREFER_FAILED·· 956

SSLVPN_ADD_SERVERURL· 956

SSLVPN_ADD_SERVERURL_FAILED·· 957

SSLVPN_ADD_SHORTCUT· 957

SSLVPN_ADD_SHORTCUT_FAILED·· 957

SSLVPN_ADD_SHORTCUTLIST· 958

SSLVPN_ADD_SHORTCUTLIST_FAILED·· 958

SSLVPN_ADD_SNATPOOL· 958

SSLVPN_ADD_SNATPOOL_FAILED·· 959

SSLVPN_ADD_URIACL· 959

SSLVPN_ADD_URIACL_FAILED·· 959

SSLVPN_ADD_URIACL_RULE· 960

SSLVPN_ADD_URIACL_RULE_FAILED·· 960

SSLVPN_ADD_URL· 960

SSLVPN_ADD_URL_FAILED·· 961

SSLVPN_ADD_URLITEM·· 961

SSLVPN_ADD_URLITEM_FAILED·· 961

SSLVPN_ADD_URLLIST· 962

SSLVPN_ADD_URLLIST_FAILED·· 962

SSLVPN_ADD_USER· 962

SSLVPN_ADD_USER_FAILED·· 963

SSLVPN_CFG_AAADOMAIN· 963

SSLVPN_CFG_AAADOMAIN_FAILED·· 963

SSLVPN_CFG_AUTHMODE· 964

SSLVPN_CFG_AUTHMODE_FAILED·· 964

SSLVPN_CFG_BINDIP· 965

SSLVPN_CFG_BINDIP_FAILED·· 965

SSLVPN_CFG_BINDIPAUTO·· 965

SSLVPN_CFG_BINDIPAUTO_FAILED·· 966

SSLVPN_CFG_CERTATTRIBUTE· 966

SSLVPN_CFG_CERTATTRIBUTE_FAILED·· 966

SSLVPN_CFG_CONNECTIONS· 967

SSLVPN_CFG_CONNECTIONS_FAILED·· 967

SSLVPN_CFG_CONTEXT_USERMAXIMUM·· 967

SSLVPN_CFG_CONTEXT_USERMAXIMUM_FAILED·· 968

SSLVPN_CFG_CONTEXTVPN· 968

SSLVPN_CFG_CONTEXTVPN_FAILED·· 968

SSLVPN_CFG_CTX_WEBPAGECUST_FAIL· 969

SSLVPN_CFG_CTX_WEBPAGECUSTOMIZE· 969

SSLVPN_CFG_CTXGATEWAY· 969

SSLVPN_CFG_CTXGATEWAY_FAILED·· 970

SSLVPN_CFG_DEFAULTPGROUP· 970

SSLVPN_CFG_DEFAULTPGROUP_FAILED·· 971

SSLVPN_CFG_DNSSERVER· 971

SSLVPN_CFG_DNSSERVER_FAILED·· 971

SSLVPN_CFG_EMOSERVER· 972

SSLVPN_CFG_EMOSERVER_FAILED·· 972

SSLVPN_CFG_GATEWAYVPN· 972

SSLVPN_CFG_GATEWAYVPN_FAILED·· 973

SSLVPN_CFG_GLB_WEBPAGECUST_FAIL· 973

SSLVPN_CFG_GLB_WEBPAGECUSTOMIZE· 973

SSLVPN_CFG_GWIPADDRESS· 974

SSLVPN_CFG_GWIPADDRESS_FAILED·· 974

SSLVPN_CFG_GWIPV6ADDRESS· 974

SSLVPN_CFG_GWIPV6ADDRESS_FAILED·· 975

SSLVPN_CFG_HTTPREDIRECT· 975

SSLVPN_CFG_HTTPREDIRECT_FAILED·· 975

SSLVPN_CFG_IMCADDRESS· 976

SSLVPN_CFG_IMCADDRESS_FAILED·· 976

SSLVPN_CFG_IPAC_WEBRESPUSH· 977

SSLVPN_CFG_IPAC_WEBRESPUSH_FAIL· 977

SSLVPN_CFG_IPCLIENT_AUTOACT· 977

SSLVPN_CFG_IPCLIENT_AUTOACT_FAIL· 978

SSLVPN_CFG_IPTNL_RATE-LIMIT· 978

SSLVPN_CFG_IPTNL_RATE-LIMIT_FAIL· 979

SSLVPN_CFG_IPTUNNELPOOL· 979

SSLVPN_CFG_IPTUNNELPOOL_FAILED·· 980

SSLVPN_CFG_KEEPALIVE· 980

SSLVPN_CFG_KEEPALIVE_FAILED·· 980

SSLVPN_CFG_LOCALPORT· 981

SSLVPN_CFG_LOCALPORT_FAILED·· 982

SSLVPN_CFG_LOGINMESSAGE· 982

SSLVPN_CFG_LOGINMESSAGE_FAILED·· 983

SSLVPN_CFG_LOGO·· 983

SSLVPN_CFG_LOGO_FAILED·· 983

SSLVPN_CFG_MAXONLINES· 984

SSLVPN_CFG_MAXONLINES_FAILED·· 984

SSLVPN_CFG_MAXUSERS· 984

SSLVPN_CFG_MAXUSERS_FAILED·· 985

SSLVPN_CFG_MSGSERVER· 985

SSLVPN_CFG_MSGSERVER_FAILED·· 985

SSLVPN_CFG_PFWDEXECUTION· 986

SSLVPN_CFG_PFWDEXECUTION_FAILED·· 986

SSLVPN_CFG_RBMPORT· 986

SSLVPN_CFG_RBMPORT_FAILED·· 987

SSLVPN_CFG_SCUTEXECUTION· 987

SSLVPN_CFG_SCUTEXECUTION_FAILED·· 987

SSLVPN_CFG_SHORTCUTDESC· 988

SSLVPN_CFG_SHORTCUTDESC_FAILED·· 988

SSLVPN_CFG_SSLCLIENT· 988

SSLVPN_CFG_SSLCLIENT_FAILED·· 989

SSLVPN_CFG_SSLSERVER· 989

SSLVPN_CFG_SSLSERVER_FAILED·· 989

SSLVPN_CFG_TIMEOUTIDLE· 990

SSLVPN_CFG_TIMEOUTIDLE_FAILED·· 990

SSLVPN_CFG_TITLE· 990

SSLVPN_CFG_TITLE_FAILED·· 991

SSLVPN_CFG_TRAFFICTHRESHOLD·· 991

SSLVPN_CFG_TRAFFICTHRESHOLD_FAIL· 991

SSLVPN_CFG_URLLISTHEAD·· 992

SSLVPN_CFG_URLLISTHEAD_FAILED·· 992

SSLVPN_CFG_WINSSERVER· 992

SSLVPN_CFG_WINSSERVER_FAILED·· 993

SSLVPN_CLR_AAADOMAIN· 993

SSLVPN_CLR_AAADOMAIN_FAILED·· 993

SSLVPN_CLR_AUTHMODE· 994

SSLVPN_CLR_AUTHMODE_FAILED·· 994

SSLVPN_CLR_BINDIP· 994

SSLVPN_CLR_BINDIP_FAILED·· 995

SSLVPN_CLR_CERTATTRIBUTE· 995

SSLVPN_CLR_CERTATTRIBUTE_FAILED·· 995

SSLVPN_CLR_CONTEXT_USERMAXIMUM·· 996

SSLVPN_CLR_CONTEXT_USERMAXIMUM_FAILED·· 996

SSLVPN_CLR_CONTEXTVPN· 996

SSLVPN_CLR_CONTEXTVPN_FAILED·· 997

SSLVPN_CLR_CTXGATEWAY· 997

SSLVPN_CLR_CTXGATEWAY_FAILED·· 997

SSLVPN_CLR_DEFAULT_PGROUP· 998

SSLVPN_CLR_DEFAULT_PGROUP_FAILED·· 998

SSLVPN_CLR_DNSSERVER· 998

SSLVPN_CLR_DNSSERVER_FAILED·· 999

SSLVPN_CLR_EMOSERVER· 999

SSLVPN_CLR_EMOSERVER_FAILED·· 999

SSLVPN_CLR_GATEWAYVPN· 1000

SSLVPN_CLR_GATEWAYVPN_FAILED·· 1000

SSLVPN_CLR_GWIPADDRESS· 1000

SSLVPN_CLR_GWIPADDRESS_FAILED·· 1001

SSLVPN_CLR_GWIPV6ADDRESS· 1001

SSLVPN_CLR_GWIPV6ADDRESS_FAILED·· 1001

SSLVPN_CLR_HTTPREDIRECT· 1002

SSLVPN_CLR_HTTPREDIRECT_FAILED·· 1002

SSLVPN_CLR_IMCADDRESS· 1002

SSLVPN_CLR_IMCADDRESS_FAILED·· 1003

SSLVPN_CLR_IPAC_WEBRESPUSH· 1003

SSLVPN_CLR_IPAC_WEBRESPUSH_FAIL· 1003

SSLVPN_CLR_IPCLIENT_AUTOACT· 1004

SSLVPN_CLR_IPCLIENT_AUTOACT_FAIL· 1004

SSLVPN_CLR_IPTNL_RATE-LIMIT· 1004

SSLVPN_CLR_IPTNL_RATE-LIMIT_FAIL· 1005

SSLVPN_CLR_IPTUNNELPOOL· 1005

SSLVPN_CLR_IPTUNNELPOOL_FAILED·· 1005

SSLVPN_CLR_LOCALPORT· 1006

SSLVPN_CLR_LOCALPORT_FAILED·· 1006

SSLVPN_CLR_LOGO·· 1006

SSLVPN_CLR_LOGO_FAILED·· 1007

SSLVPN_CLR_MSGSERVER· 1007

SSLVPN_CLR_MSGSERVER_FAILED·· 1007

SSLVPN_CLR_PFWDEXECUTION· 1008

SSLVPN_CLR_PFWDEXECUTION_FAILED·· 1008

SSLVPN_CLR_SCUTDESCRIPTION· 1008

SSLVPN_CLR_SCUTDESCRIPTION_FAILED·· 1009

SSLVPN_CLR_SCUTEXECUTION· 1009

SSLVPN_CLR_SCUTEXECUTION_FAILED·· 1009

SSLVPN_CLR_SSLCLIENT· 1010

SSLVPN_CLR_SSLCLIENT_FAILED·· 1010

SSLVPN_CLR_SSLSERVER· 1010

SSLVPN_CLR_SSLSERVER_FAILED·· 1011

SSLVPN_CLR_TRAFFICTHRESHOLD·· 1011

SSLVPN_CLR_TRAFFICTHRESHOLD_FAIL· 1011

SSLVPN_CLR_WINSSERVER· 1012

SSLVPN_CLR_WINSSERVER_FAILED·· 1012

SSLVPN_DEL_CONTENT_TYPE· 1012

SSLVPN_DEL_CONTENT_TYPE_FAILED·· 1013

SSLVPN_DEL_CONTEXT· 1013

SSLVPN_DEL_CONTEXT_FAILED·· 1013

SSLVPN_DEL_EXCROUTEITEM·· 1014

SSLVPN_DEL_EXCROUTEITEM_FAILED·· 1014

SSLVPN_DEL_FILEPOLICY· 1014

SSLVPN_DEL_FILEPOLICY_FAILED·· 1015

SSLVPN_DEL_GATEWAY· 1015

SSLVPN_DEL_GATEWAY_FAILED·· 1015

SSLVPN_DEL_INCROUTEITEM·· 1016

SSLVPN_DEL_INCROUTEITEM_FAILED·· 1016

SSLVPN_DEL_IPADDRESSPOOL· 1016

SSLVPN_DEL_IPADDRESSPOOL_FAILED·· 1017

SSLVPN_DEL_IPTUNNELACIF· 1017

SSLVPN_DEL_IPTUNNELACIF_FAILED·· 1017

SSLVPN_DEL_IPV4_RANGE· 1018

SSLVPN_DEL_IPV4_RANGE_FAILED·· 1018

SSLVPN_DEL_IPV6_RANGE· 1018

SSLVPN_DEL_IPV6_RANGE_FAILED·· 1019

SSLVPN_DEL_LOCALPORT· 1019

SSLVPN_DEL_LOCALPORT_FAILED·· 1019

SSLVPN_DEL_NEWCONTENT· 1020

SSLVPN_DEL_NEWCONTENT_FAILED·· 1020

SSLVPN_DEL_OLDCONTENT· 1020

SSLVPN_DEL_OLDCONTENT_FAILED·· 1021

SSLVPN_DEL_PORTFWD·· 1021

SSLVPN_DEL_PORTFWD_FAILED·· 1021

SSLVPN_DEL_PORTFWD_ITEM·· 1022

SSLVPN_DEL_PORTFWD_ITEM_FAILED·· 1022

SSLVPN_DEL_PYGROUP· 1022

SSLVPN_DEL_PYGROUP_FAILED·· 1023

SSLVPN_DEL_REFERIPACL· 1023

SSLVPN_DEL_REFERIPACL_FAILED·· 1023

SSLVPN_DEL_REFERPFWDITEM·· 1024

SSLVPN_DEL_REFERPFWDITEM_FAILED·· 1024

SSLVPN_DEL_REFERPORTFWD·· 1024

SSLVPN_DEL_REFERPORTFWD_FAILED·· 1025

SSLVPN_DEL_REFERSCUTLIST· 1025

SSLVPN_DEL_REFERSCUTLIST_FAILED·· 1025

SSLVPN_DEL_REFERSHORTCUT· 1026

SSLVPN_DEL_REFERSHORTCUT_FAILED·· 1026

SSLVPN_DEL_REFERSNATPOOL· 1026

SSLVPN_DEL_REFERSNATPOOL_FAILED·· 1027

SSLVPN_DEL_REFERTCPACL· 1027

SSLVPN_DEL_REFERTCPACL_FAILED·· 1027

SSLVPN_DEL_REFERURIACL· 1028

SSLVPN_DEL_REFERURIACL_FAILED·· 1028

SSLVPN_DEL_REFERURLITEM·· 1029

SSLVPN_DEL_REFERURLITEM_FAILED·· 1029

SSLVPN_DEL_REFERURLLIST· 1029

SSLVPN_DEL_REFERURLLIST_FAILED·· 1030

SSLVPN_DEL_REFERWEBACL· 1030

SSLVPN_DEL_REFERWEBACL_FAILED·· 1030

SSLVPN_DEL_REWRITE_RULE· 1031

SSLVPN_DEL_REWRITE_RULE_FAILED·· 1031

SSLVPN_DEL_ROUTELIST· 1031

SSLVPN_DEL_ROUTELIST_FAILED·· 1032

SSLVPN_DEL_ROUTEREFER· 1032

SSLVPN_DEL_ROUTEREFER_FAILED·· 1032

SSLVPN_DEL_SERVERURL· 1033

SSLVPN_DEL_SERVERURL_FAILED·· 1033

SSLVPN_DEL_SHORTCUT· 1033

SSLVPN_DEL_SHORTCUT_FAILED·· 1034

SSLVPN_DEL_SHORTCUTLIST· 1034

SSLVPN_DEL_SHORTCUTLIST_FAILED·· 1034

SSLVPN_DEL_SNATPOOL· 1035

SSLVPN_DEL_SNATPOOL_FAILED·· 1035

SSLVPN_DEL_URIACL· 1035

SSLVPN_DEL_URIACL_FAILED·· 1036

SSLVPN_DEL_URIACL_RULE· 1036

SSLVPN_DEL_URIACL_RULE_FAILED·· 1036

SSLVPN_DEL_URL· 1037

SSLVPN_DEL_URL_FAILED·· 1037

SSLVPN_DEL_URLITEM·· 1037

SSLVPN_DEL_URLITEM_FAILED·· 1038

SSLVPN_DEL_URLLIST· 1038

SSLVPN_DEL_URLLIST_FAILED·· 1038

SSLVPN_DEL_URLMAPPING·· 1039

SSLVPN_DEL_URLMAPPING_FAILED·· 1039

SSLVPN_DEL_USER· 1039

SSLVPN_DEL_USER_FAILED·· 1040

SSLVPN_DISABLE_CONTEXT· 1040

SSLVPN_DISABLE_CONTEXT_FAILED·· 1040

SSLVPN_DISABLE_CRTAUTH· 1041

SSLVPN_DISABLE_CRTAUTH_FAILED·· 1041

SSLVPN_DISABLE_DYNAMICPWD·· 1041

SSLVPN_DISABLE_DYNAMICPWD_FAILED·· 1042

SSLVPN_DISABLE_GATEWAY· 1042

SSLVPN_DISABLE_GATEWAY_FAILED·· 1042

SSLVPN_DISABLE_GLOBAL_LOG·· 1042

SSLVPN_DISABLE_GLOBAL_LOG_FAILED·· 1043

SSLVPN_DISABLE_GLOBALURLMASKING·· 1043

SSLVPN_DISABLE_GLOBALURLMASKING_FAILED·· 1043

SSLVPN_DISABLE_IPTNL_LOG_FAIL· 1044

SSLVPN_DISABLE_IPTNL_LOG·· 1044

SSLVPN_DISABLE_PWDAUTH· 1044

SSLVPN_DISABLE_PWDAUTH_FAILED·· 1045

SSLVPN_DISABLE_SMSIMC· 1045

SSLVPN_DISABLE_SMSIMC_FAILED·· 1045

SSLVPN_DISABLE_URLMASKING·· 1046

SSLVPN_DISABLE_URLMASKING_FAILED·· 1046

SSLVPN_DISABLE_VERIFYCODE· 1046

SSLVPN_DISABLE_VERIFYCODE_FAILED·· 1047

SSLVPN_DOMAIN_URLMAPPING·· 1047

SSLVPN_DOMAIN_URLMAPPING_FAILED·· 1048

SSLVPN_ENABLE_CONTEXT· 1048

SSLVPN_ENABLE_CONTEXT_FAILED·· 1048

SSLVPN_ENABLE_CRTAUTH· 1049

SSLVPN_ENABLE_CRTAUTH_FAILED·· 1049

SSLVPN_ENABLE_DYNAMICPWD·· 1049

SSLVPN_ENABLE_DYNAMICPWD_FAILED·· 1050

SSLVPN_ENABLE_FORCELOGOUT· 1050

SSLVPN_ENABLE_FORCELOGOUT_FAILED·· 1050

SSLVPN_ENABLE_GATEWAY· 1051

SSLVPN_ENABLE_GATEWAY_FAILED·· 1051

SSLVPN_ENABLE_GLOBAL_LOG·· 1051

SSLVPN_ENABLE_GLOBAL_LOG_FAILED·· 1051

SSLVPN_ENABLE_GLOBALURLMASKING·· 1052

SSLVPN_ENABLE_GLOBALURLMASKING_FAILED·· 1052

SSLVPN_ENABLE_IPTNL_LOG·· 1052

SSLVPN_ENABLE_IPTNL_LOG_FAIL· 1053

SSLVPN_ENABLE_PWDAUTH· 1053

SSLVPN_ENABLE_PWDAUTH_FAILED·· 1053

SSLVPN_ENABLE_SMSIMC· 1054

SSLVPN_ENABLE_SMSIMC_FAILED·· 1054

SSLVPN_ENABLE_URLMASKIN· 1054

SSLVPN_ENABLE_URLMASKING_FAILED·· 1055

SSLVPN_ENABLE_VERIFYCODE· 1055

SSLVPN_ENABLE_VERIFYCODE_FAILED·· 1055

SSLVPN_IP_RESOURCE_DENY· 1056

SSLVPN_IP_RESOURCE_FAILED·· 1056

SSLVPN_IP_RESOURCE_PERMIT· 1057

SSLVPN_IPAC_CONN_CLOSE· 1057

SSLVPN_IPAC_PACKET_DROP· 1058

SSLVPN_PORT_URLMAPPING·· 1058

SSLVPN_PORT_URLMAPPING_FAILED·· 1059

SSLVPN_SERVICE_UNAVAILABLE· 1059

SSLVPN_TCP_RESOURCE_DENY· 1060

SSLVPN_TCP_RESOURCE_FAILED·· 1060

SSLVPN_TCP_RESOURCE_PERMIT· 1061

SSLVPN_UNDO_FORCELOGOUT· 1061

SSLVPN_UNDO_FORCELOGOUT_FAILED·· 1061

SSLVPN_URLITEM_ADD_URIACL· 1062

SSLVPN_URLITEM_ADD_URIACL_FAILED·· 1062

SSLVPN_URLITEM_DEL_URIACL· 1062

SSLVPN_URLITEM_DEL_URIACL_FAILED·· 1063

SSLVPN_USER_LOGIN· 1063

SSLVPN_USER_LOGINFAILED·· 1064

SSLVPN_USER_LOGOUT· 1065

SSLVPN_USER_NUMBER· 1065

SSLVPN_WEB_RESOURCE_DENY· 1066

SSLVPN_WEB_RESOURCE_FAILED·· 1066

SSLVPN_WEB_RESOURCE_PERMIT· 1067

STAMGR messages· 1067

STAMGR_ADD_FAILVLAN· 1067

STAMGR_ADDBAC_INFO·· 1068

STAMGR_ADDSTA_INFO·· 1068

STAMGR_AUTHORACL_FAILURE· 1069

STAMGR_AUTHORUSERPROFILE_FAILURE· 1070

STAMGR_BSS_FAILURE· 1070

STAMGR_CLIENT_FAILURE· 1071

STAMGR_CLIENT_OFFLINE· 1077

STAMGR_CLIENT_ONLINE· 1081

STAMGR_CLIENT_SNOOPING·· 1081

STAMGR_DELBAC_INFO·· 1082

STAMGR_DELSTA_INFO·· 1082

STAMGR_MACA_LOGIN_FAILURE· 1083

STAMGR_MACA_LOGIN_SUCC· 1084

STAMGR_MACA_LOGOFF· 1085

STAMGR_ROAM_FAILED·· 1086

STAMGR_ROAM_SUCCESS· 1087

STAMGR_SERVICE_FAILURE· 1087

STAMGR_SERVICE_OFF· 1091

STAMGR_SERVICE_ON· 1092

STAMGR_STA_ADDMOB_LKUP_ENDOFIOCTL· 1092

STAMGR_STAIPCHANGE_INFO·· 1093

STAMGR_TRIGGER_IP· 1093

STM messages· 1093

STM_AUTO_UPDATE_FAILED·· 1094

STM_AUTO_UPDATE_FINISHED·· 1095

STM_AUTO_UPDATING·· 1096

STM_LINK_DOWN· 1096

STM_LINK_TIMEOUT· 1097

STM_LINK_UP· 1097

STM_MERGE· 1097

STM_MERGE_NEED_REBOOT· 1098

STM_MERGE_NOT_NEED_REBOOT· 1098

STM_SAMEMAC· 1099

STM_SOMER_CHECK· 1099

STP messages· 1099

STP_BPDU_PROTECTION· 1100

STP_BPDU_RECEIVE_EXPIRY· 1100

STP_CONSISTENCY_RESTORATION· 1100

STP_DETECTED_TC· 1101

STP_DISABLE· 1101

STP_DISCARDING·· 1101

STP_ENABLE· 1102

STP_FORWARDING·· 1102

STP_LOOP_PROTECTION· 1102

STP_NOT_ROOT· 1103

STP_NOTIFIED_TC· 1103

STP_PORT_TYPE_INCONSISTENCY· 1103

STP_PVID_INCONSISTENCY· 1104

STP_PVST_BPDU_PROTECTION· 1104

STP_ROOT_PROTECTION· 1104

STP_STG_NUM_DETECTION· 1105

SYSEVENT· 1105

EVENT_TIMEOUT· 1105

SYSLOG messages· 1106

ENCODING·· 1106

SYSLOG_LOGFILE_FULL· 1106

SYSLOG_RESTART· 1107

TACACS messages· 1107

TACACS_ACCT_SERVER_DOWN· 1107

TACACS_ACCT_SERVER_UP· 1108

TACACS_AUTH_FAILURE· 1108

TACACS_AUTH_SERVER_DOWN· 1109

TACACS_AUTH_SERVER_UP· 1109

TACACS_AUTH_SUCCESS· 1110

TACACS_AUTHOR_SERVER_DOWN· 1110

TACACS_AUTHOR_SERVER_UP· 1111

TACACS_REMOVE_SERVER_FAIL· 1111

TCSM·· 1111

TCSM_CERT_BROKEN· 1112

TCSM_KEY_BROKEN· 1112

TCSM_KEY_HIERARCHY_BROKEN· 1112

TCSM_TSS_SVC_DOWN· 1113

TCSM_TSS_SVC_UP· 1113

TELNETD messages· 1113

TELNETD_ACL_DENY· 1114

TELNETD_REACH_SESSION_LIMIT· 1114

TERMINAL messages· 1114

TERMINAL_CHANGED_LOG_IP· 1115

TERMINAL_CHANGED_LOG_IPV6· 1116

TRILL messages· 1116

TRILL_DUP_SYSTEMID·· 1117

TRILL_INTF_CAPABILITY· 1118

TRILL_LICENSE_EXPIRED·· 1118

TRILL_MEM_ALERT· 1119

TRILL_NBR_CHG·· 1120

TRILL_NO_LICENSE· 1121

UFLT messages· 1121

UFLT_MATCH_IPV4_LOG (syslog) 1122

UFLT_MATCH_IPV6_LOG (syslog) 1123

UFLT_NOT MATCH_IPV4_LOG (syslog) 1124

UFLT_NOT MATCH_IPV6_LOG (syslog) 1125

UFLT_MATCH_IPv4_LOG (fast log) 1126

UFLT_MATCH_IPv6_LOG (fast log) 1127

UFLT_NOT_MATCH_IPv4_LOG (fast log) 1128

UFLT_NOT_MATCH_IPv6_LOG (fast log) 1129

UFLT_WARNING·· 1130

UFLT_WARNING·· 1130

VLAN messages· 1130

VLAN_FAILED·· 1131

VLAN_VLANMAPPING_FAILED·· 1132

VLAN_VLANSTRIP_REG_DIFF_CONFIG·· 1134

VLAN_VLANTRANSPARENT_FAILED·· 1135

VRRP messages· 1136

VRRP_AUTH_FAILED·· 1136

VRRP_CONFIG_ERROR· 1137

VRRP_PACKET_ERROR· 1137

VRRP_STATUS_CHANGE· 1138

VRRP_VF_STATUS_CHANGE· 1139

VRRP_VMAC_INEFFECTIVE· 1139

VSRP messages· 1139

VSRP_BIND_FAILED·· 1140

VXLAN messages· 1140

VXLAN_LICENSE_UNAVAILABLE· 1140

WAF messages· 1140

WAF_MATCH_IPV4_LOG·· 1141

WAF_MATCH_IPV6_LOG·· 1143

WEB messages· 1144

LOGIN· 1144

LOGIN_FAILED·· 1145

LOGOUT· 1145

WEBCACHE messages· 1145

WEBCACHE_CHECK· 1146

WEBCACHE_AVAILABLE· 1146

WEBCACHE_INAVAILABLE· 1147

WFF messages· 1147

WFF_HARDWARE_INIT_FAILED·· 1147

WFF_HARDWARE_IPC_FAILED·· 1147

WFF_HARDWARE_LOOPBACK_FAILED·· 1148

WFF_HARDWARE_PCIE_FAILED·· 1148

WIPS messages· 1148

APFLOOD·· 1148

AP_CHANNEL_CHANGE· 1149

ASSOCIATEOVERFLOW·· 1149

WIPS_DOS· 1149

WIPS_FLOOD·· 1150

HONEYPOT· 1150

HTGREENMODE· 1151

WIPS_MALF· 1151

MAN_IN_MIDDLE· 1152

WIPS_ROGUE· 1152

WIPS_SPOOF· 1152

WIPS_UNAUTH· 1153

WIPS_WEAKIV· 1153

WIRELESSBRIDGE· 1153

WLANAUD messages· 1153

WLANAUD_CLIENT_ONLINE· 1154

WMESH messages· 1154

MESH_ACTIVELINK_SWITCH· 1155

MESH_LINKDOWN· 1156

MESH_LINKUP· 1157

MESH_REVOPEN_MAC· 1157

WRDC messages· 1157

WRDC_USER_DELETE· 1158

WRDC_USER_OFFLINE· 1158

WRDC_USER_ONLINE· 1159

WRDC_USER_ROAM·· 1159

WSA messages· 1159

WSA_DEVICE· 1160

 


Introduction

This document includes the following system messages:

·     Messages specific to Release 0821 of the device.

·     Messages for the Comware 7 software platform version based on which Release 0821 was produced. Some platform system messages might not be available on the device.

This document is intended only for managing MSR routers. Do not use this document for any other device models.

This document assumes that the readers are familiar with data communications technologies and H3C networking products.

System log message format

By default, the system log messages use one of the following formats depending on the output destination:

·     Log host (RFC 3164-compliant format):

<PRI>TIMESTAMP Sysname %%vendorMODULE/severity/MNEMONIC: location; CONTENT

·     Destinations except for the log host:

Prefix TIMESTAMP Sysname MODULE/severity/MNEMONIC: CONTENT

 

 

NOTE:

Log message examples in this document use the format for destinations except the log host. They do not contain elements available only for the log host, including the location element.

 

Table 1 System log message elements

Element

Description

<PRI>

Priority identifier. This element is contained only in messages sent to the log host.

It is calculated by using the following formula:

Priority identifier=facilityx8+severity

Where:

·     Facility is specified by using the info-center loghost command. A log host uses this parameter to identify log sources and filter log messages.

·     Severity represents the importance of the message. For more information about severity levels, see Table 2.

Prefix

Message type identifier. This element is contained only in the messages sent to non-log-host destinations.

This element uses the following symbols to indicate message severity:

·     Percentage sign (%)—Informational and higher levels.

·     Asterisk (*)—Debug level.

TIMESTAMP

Date and time when the event occurred.

The following are commands for configuring the timestamp format:

·     Log host—Use the info-center timestamp loghost command.

·     Non-log-host destinations—Use the info-center timestamp command.

Sysname

Name or IP address of the device that generated the message.

%%vendor

Manufacturer flag. This element is %%10 for H3C.

This element is contained only in messages sent to the log host.

MODULE

Name of the module that produced the message.

severity

Severity level of the message. (For more information about severity levels, see Table 2.)

MNEMONIC

Text string that uniquely identifies the system message. The maximum length is 32 characters.

location

Optional. This element identifies where the message occurred. This element is contained only in messages sent to the log host.

This element presents location information about the message in the following format:

-attribute1=x-attribute2=y…-attributeN=z

The following are examples of location attributes:

·     -MDC=XX, which represents the MDC on which the message occurred.

·     -DevIp=XXX.XXX.XXX.XXX, which represents the source IP of the message.

·     -Slot=XX, which represents the slot on which the message occurred.

·     -Chassis=XX-Slot=XX, which represent the chassis and slot on which the message occurred.

This element is separated from the CONTENT element by using a semicolon (;).

CONTENT

A description of the event or error.

For variable fields in this element, this document uses the representations in Table 3.

 

System log messages are classified into eight severity levels from 0 to 7. The lower the number, the higher the severity.

Table 2 System log message severity levels

Level

Severity

Description

0

Emergency

The system is unusable. For example, the system authorization has expired.

1

Alert

Action must be taken immediately. For example, traffic on an interface exceeds the upper limit.

2

Critical

Critical condition. For example, the device temperature exceeds the upper limit, the power module fails, or the fan tray fails.

3

Error

Error condition. For example, the link state changes or a storage card is unplugged.

4

Warning

Warning condition. For example, an interface is disconnected, or the memory resources are used up.

5

Notification

(Notice in RFC 3164)

Normal but significant condition. For example, a terminal logs in to the device, or the device reboots.

6

Informational

Informational message. For example, a command or a ping operation is executed.

7

Debug

Debugging message.

 

For variable fields in the message text, this document uses the representations in Table 3. The values are case insensitive, even though the representations are uppercase letters.

Table 3 Variable field representations

Representation

Information type

INT16

Signed 16-bit decimal number.

UINT16

Unsigned 16-bit decimal number.

INT32

Signed 32-bit decimal number.

UINT32

Unsigned 32-bit decimal number.

INT64

Signed 64-bit decimal number.

UINT64

Unsigned 64-bit decimal number.

DOUBLE

Two dot-separated signed 32-bit decimal numbers. The format is [INTEGER].[INTEGER].

HEX

Hexadecimal number.

CHAR

Single character.

STRING

Character string.

IPADDR

IP address.

MAC

MAC address.

DATE

Date.

TIME

Time.

 

Managing and obtaining system log messages

You can manage system log messages by using the information center.

By default, the information center is enabled. Log messages can be output to the console, monitor terminal, log buffer, log host, and log file.

To filter log messages, use the info-center source command to specify log output rules. A log output rule specifies the source modules and the lowest severity level of log messages that can be output to a destination. A log message is output if its severity level is higher than or equal to the specified level. For example, if you specify a severity level of 6 (informational), log messages that have a severity level from 0 to 6 are output.

For more information about using the information center, see the network management and monitoring configuration guide for the product.

Obtaining log messages from the console terminal

Access the device through the console port. Real-time log messages are displayed on the console terminal.

Obtaining log messages from a monitor terminal

Monitor terminals refer to terminals that access the device through the AUX, VTY, or TTY lines (for example, Telnet). To obtain log messages from a monitor terminal, use the following guidelines:

·     To display log messages on the monitor terminal, you must configure the terminal monitor command.

·     For monitor terminals, the lowest level of log messages that can be displayed is determined by both the terminal logging level and info-center source commands.

 

 

NOTE:

Settings for the terminal monitor and terminal logging level commands take effect only on the current login session. The default settings for the commands restore at a relogin.

 

Obtaining log messages from the log buffer

Use the display logbuffer command to display history log messages in the log buffer.

Obtaining log messages from the log file

By default, the log file feature automatically saves logs from the log file buffer to the log file every 24 hours. You can use the info-center logfile frequency command to change the automatic saving internal.

To manually save logs to the log file, use the logfile save command. The log file buffer is cleared each time a save operation is performed.

By default, you can obtain the log file from the cfa0:/logfile/ path if the CF card is not partitioned. If the CF card is partitioned, the file path is cfa1:/logfile/.

To view the contents of the log file on the device, use the more command.

Obtaining log messages from a log host

Use the info-center loghost command to specify the service port number and IP address of a log host. To specify multiple log hosts, repeat the command.

For a successful log message transmission, make sure the specified port number is the same as the port number used on the log host. The default service port number is 514.

Software module list

Table 4 lists all software modules that might produce system log messages. This document uses "OPENSRC" to represent all open source modules.

Table 4 Software module list

Module name representation

Module name expansion

AAA

Authentication, Authorization and Accounting

ACL

Access Control List

ADVPN

Auto Discovery Virtual Private Network

AFT

Address Family Translation

ANCP

Access Node Control Protocol

ANTIVIRUS

Anti-virus

APMGR

Access Point Management

APR

Application Recognition

ARP

Address Resolution Protocol

ASPF

Advanced Stateful Packet Filter

ATK

Attack Detection and Prevention

ATM

Asynchronous Transfer Mode

AUDIT

Audit

AUTOCFG

Automatic configuration

AVC

Application Visibility Control

BFD

Bidirectional Forwarding Detection

BGP

Border Gateway Protocol

BLS

Blacklist

CC

Challenge Collapsar Defense

CFD

Connectivity Fault Detection

CFGLOG

Configuration log

CFGMAN

Configuration Management

CGROUP

Collaboration Group

CONNLMT

Connection Limit

CONTEXT

Context

DAC

Data Analysis Center

DEV

Device Management

DFILTER

Data Filter

DHCP

Dynamic Host Configuration Protocol

DHCPS

DHCP Server

DHCPS6

DHCPv6 Server

DHCPSP4

DHCP Snooping

DHCPSP6

DHCPv6 Snooping

DIAG

Diagnosis

DLDP

Device Link Detection Protocol

DOT1X

802.1X

EDEV

Extended-Device Management

EIGRP

Enhanced Interior Gateway Routing Protocol

ERPS

Ethernet Ring Protection Switching

ETHOAM

Ethernet Operation, Administration and Maintenance

EVB

Edge Virtual Bridging

EVIISIS

Ethernet Virtual Interconnect Intermediate System-to-Intermediate System

FCLINK

Fibre Channel Link

FCOE

Fibre Channel Over Ethernet

FCZONE

Fibre Channel Zone

FFILTER

File Filter

FILTER

Filter

FIPSNG

FIP Snooping

FS

File System

FTP

File Transfer Protocol

GLB

Global Load Balancing

gRPC

Google Remote Procedure Call

HA

High Availability

HQOS

Hierarchical QoS

HTTPD

Hypertext Transfer Protocol Daemon

IDENTITY

Identity

IFNET

Interface Net Management

IKE

Internet Key Exchange

IMA

Integrity Measurements Architecture

IP6ADDR

IPv6 Addressing

IPADDR

IP Addressing

IPOE

IP over Ethernet

IPREPUTATION

IP Reputation

IPS

Intrusion Prevention System

IPSEC

IP Security

IPSG

IP Source Guard

IRDP

ICMP Router Discovery Protocol

IRF

Intelligent Resilient Framework

ISIS

Intermediate System-to-Intermediate System

ISSU

In-Service Software Upgrade

KDNS

Kernel Domain Name System

KHTTP

Kernel Hypertext Transfer Protocol

L2PT

Layer 2 Protocol Tunneling

L2TPV2

Layer 2 Tunneling Protocol Version 2

L2VPN

Layer 2 VPN

LAGG

Link Aggregation

LB

Load Balancing

LDP

Label Distribution Protocol

LLDP

Link Layer Discovery Protocol

LOAD

Load Management

LOGIN

Login

LPDT

Loopback Detection

LS

Local Server

LSPV

LSP Verification

MAC

Media Access Control

MACA

MAC Authentication

MACSEC

MAC Security

MBFD

MPLS BFD

MBUF

Memory Buffer

MDC

Multitenant Device Context

MFIB

Multicast Forwarding Information Base

MGROUP

Mirroring Group

MPLS

Multiprotocol Label Switching

MTLK

Monitor Link

NAT

Network Address Translation

ND

Neighbor Discovery

NETCONF

Network Configuration Protocol

NETSHARE

NetShare Control

NQA

Network Quality Analyzer

NTP

Network Time Protocol

OBJP

Object Policy

OFP

OpenFlow Protocol

OPTMOD

Optical Module

OPENSRC(RSYNC)

Open Source (Remote Synchronization)

OSPF

Open Shortest Path First

OSPFV3

Open Shortest Path First Version 3

PBB

Provider Backbone Bridge

PBR

Policy-Based Routing

PCAPWARE

Packet Capture Wireshark

PCE

Path Computation Element

PEX

Port Extender

PFILTER

Packet Filter

PHYD

Physical Detection

PIM

Protocol Independent Multicast

PING

Packet Internet Groper

PKI

Public Key Infrastructure

PKT2CPU

Packet to CPU

PKTCPT

Packet Capture

PORTAL

Portal

PORTSEC

Port Security

POSA

Point Of Sales

PPP

Point to Point Protocol

PREPROVISION

Preprovision

PTS

Platform Trust Services

PWDCTL

Password Control

QOS

Quality of Service

RADIUS

Remote Authentication Dial In User Service

RBM

Remote Backup Management

RDDC

Redundancy

RIP

Routing Information Protocol

RIPNG

Routing Information Protocol Next Generation

RM

Routing Management

RPR

Resilient Packet Ring

RRPP

Rapid Ring Protection Protocol

RTM

Real-Time Event Manager

SANDBOX

Sandbox

SCD

Server Connection Detection

SCM

Service Control Manager

SCRLSP

Static CRLSP

SECDIAG

Security Diagnose

SECP

Security Policy

SESSION

Session

SFLOW

Sampler Flow

SHELL

Shell

SLSP

Static LSP

SMLK

Smart Link

SNMP

Simple Network Management Protocol

SSHC

Secure Shell Client

SSHS

Secure Shell Server

SSL VPN

Secure Sockets Layer Virtual Private Network

STAMGR

Station Management

STM

Stack Topology Management

STP

Spanning Tree Protocol

SYSEVENT

System Event

SYSLOG

System Log

TACACS

Terminal Access Controller Access Control System

TCSM

Trusted Computing Services Management

TELNETD

Telnet Daemon

TERMINAL

Terminal Identification

TRILL

Transparent Interconnect of Lots of Links

UDPI

User DPI

UFLT

URL Filter

VLAN

Virtual Local Area Network

VRRP

Virtual Router Redundancy Protocol

VSRP

Virtual Service Redundancy Protocol

VXLAN

Virtual eXtensible LAN

WAF

Web Application Firewall

WEB

Web

WEBCACHE

Web Cache

WFF

WLAN Fast Forwarding

WIPS

Wireless Intrusion Prevention System

WLANAUD

WLAN Audit

WMESH

WLAN Mesh

WRDC

Wireless Roaming Data Center

WSA

Wireless Spectrum Analysis

 

Using this document

This document categorizes system log messages by software module. The modules are ordered alphabetically. Except for OPENSRC, the system log messages for each module are listed in alphabetic order of their mnemonic names. The OPENSRC messages are unordered because they use the same mnemonic name (SYSLOG). For each OPENSRC message, the section title uses a short description instead of the mnemonic name.

This document explains messages in tables. Table 5 describes information provided in these tables.

Table 5 Message explanation table contents

Item

Content

Example

Message text

Presents the message description.

ACL [UINT32] [STRING] [UINT64] packet(s).

Variable fields

Briefly describes the variable fields in the order that they appear in the message text.

The variable fields are numbered in the "$Number" form to help you identify their location in the message text.

$1: ACL number.

$2: ID and content of an ACL rule.

$3: Number of packets that matched the rule.

Severity level

Provides the severity level of the message.

6

Example

Provides a real message example. The examples do not include the "<PRI>TIMESTAMP Sysname %%vendor" part or the "Prefix TIMESTAMP Sysname" part, because information in this part varies with system settings.

ACL/6/ACL_STATIS_INFO: ACL 2000 rule 0 permit source 1.1.1.1 0 logging 10000 packet(s).

Explanation

Explains the message, including the event or error cause.

Number of packets that matched an ACL rule. This message is sent when the packet counter changes.

Recommended action

Provides recommended actions. For informational messages, no action is required.

No action is required.

 

AAA messages

This section contains AAA messages.

AAA_FAILURE

Message text

-AAAType=[STRING]-AAADomain=[STRING]-Service=[STRING]-UserName=[STRING]; AAA failed.

Variable fields

$1: AAA type.

$2: AAA scheme.

$3: Service.

$4: Username.

Severity level

5

Example

AAA/5/AAA_FAILURE: -AAAType=AUTHOR-AAADomain=domain1-Service=login-UserName=cwf@system; AAA failed.

Explanation

An AAA request was rejected.

The following are the common reasons:

·     No response was received from the server.

·     The username or password was incorrect.

·     The service type that the user applied for was incorrect.

Recommended action

1.     Verify that the device is correctly connected to the server.

2.     Enter the correct username and password.

3.     Verify that the server settings are the same as the settings on the device.

4.     If the problem persists, contact H3C Support.

 

AAA_LAUNCH

Message text

-AAAType=[STRING]-AAADomain=[STRING]-Service=[STRING]-UserName=[STRING]; AAA launched.

Variable fields

$1: AAA type.

$2: AAA scheme.

$3: Service.

$4: Username.

Severity level

6

Example

AAA/6/AAA_LAUNCH: -AAAType=AUTHEN-AAADomain=domain1-Service=login-UserName=cwf@system; AAA launched.

Explanation

An AAA request was received.

Recommended action

No action is required.

 

AAA_SUCCESS

Message text

-AAAType=[STRING]-AAADomain=[STRING]-Service=[STRING]-UserName=[STRING]; AAA succeeded.

Variable fields

$1: AAA type.

$2: AAA scheme.

$3: Service.

$4: Username.

Severity level

6

Example

AAA/6/AAA_SUCCESS: -AAAType=AUTHOR-AAADomain=domain1-Service=login-UserName=cwf@system; AAA succeeded.

Explanation

An AAA request was accepted.

Recommended action

No action is required.

 

ACL messages

This section contains ACL messages.

ACL_ACCELERATE_NO_RES

Message text

Failed to accelerate [STRING] ACL [UINT32]. The resources are insufficient.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NO_RES: Failed to accelerate IPv6 ACL 2001. The resources are insufficient.

Explanation

Hardware resources were insufficient for accelerating an ACL.

Recommended action

Delete some rules or disabled ACL acceleration for other ACLs to release hardware resources.

 

ACL_ACCELERATE_NONCONTIGUOUSMASK

Message text

Failed to accelerate ACL [UINT32]. ACL acceleration supports only contiguous wildcard masks.

Variable fields

$1: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NONCONTIGUOUSMASK: Failed to accelerate ACL 2001. ACL acceleration supports only contiguous wildcard masks.

Explanation

ACL acceleration failed because rules containing noncontiguous wildcard masks exist in the ACL.

Recommended action

Check the ACL rules and delete the unsupported configuration.

 

ACL_ACCELERATE_NOT_SUPPORT

Message text

Failed to accelerate [STRING] ACL [UINT32]. The operation is not supported.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NOT_SUPPORT: Failed to accelerate IPv6 ACL 2001. The operation is not supported.

Explanation

ACL acceleration failed because the system does not support ACL acceleration.

Recommended action

No action is required.

 

ACL_ACCELERATE_NOT_SUPPORTHOPBYHOP

Message text

Failed to accelerate IPv6 ACL [UINT32]. ACL acceleration does not support the rules that contain the hop-by-hop keywords.

Variable fields

$1: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NOT_SUPPORTHOPBYHOP: Failed to accelerate IPv6 ACL 2001. ACL acceleration does not support the rules that contain the hop-by-hop keywords.

Explanation

ACL acceleration failed for the IPv6 ACL because rules containing the hop-by-hop keyword exist in the ACL.

Recommended action

Check the ACL rules and delete the unsupported configuration.

 

ACL_ACCELERATE_NOT_SUPPORTMULTITCPFLAG

Message text

Failed to accelerate IPv6 ACL [UINT32]. ACL acceleration does not support specifying multiple TCP flags in one rule.

Variable fields

$1: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NOT_SUPPORTMULTITCPFLAG: Failed to accelerate IPv6 ACL 2001. ACL acceleration does not support specifying multiple TCP flags in one rule.

Explanation

ACL acceleration failed for the IPv6 ACL because rules containing multiple TCP flags exist in the ACL.

Recommended action

Check the ACL rules and delete the unsupported configuration.

 

ACL_ACCELERATE_UNK_ERR

Message text

Failed to accelerate [STRING] ACL [UINT32].

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_UNK_ERR: Failed to accelerate IPv6 ACL 2001.

Explanation

ACL acceleration failed because of an unknown error.

Recommended action

No action is required.

 

ACL_DYNRULE_COMMENT

Message text

The comment of [STRING], which was generated dynamically, can't be added or deleted manually.

Variable fields

$1: Dynamic ACL rule information.

Severity level

6

Example

ACL/6/ACL_DYNRULE_COMMENT: The comment of IPv4 ACL 3000 rule 1, which was generated dynamically, can't be added or deleted manually.

Explanation

The comment of a dynamic ACL rule can't be added or deleted manually.

Recommended action

No action is required.

 

ACL_DYNRULE_MDF

Message text

[STRING], which was generated dynamically, was deleted or modified manually.

Variable fields

$1: Dynamic ACL rule information.

Severity level

5

Example

ACL/5/ACL_DYNRULE_MDF: IPv4 ACL 3000 rule 1, which was generated dynamically, was deleted or modified manually.

Explanation

A dynamic ACL rule was deleted or modified manually.

Recommended action

Make sure deleting or modifying the dynamic ACL rule does not affect ongoing services on the network.

 

ACL_IPV6_STATIS_INFO

Message text

IPv6 ACL [UINT32] [STRING] [UINT64] packet(s).

Variable fields

$1: ACL number.

$2: ID and content of an IPv6 ACL rule.

$3: Number of packets that matched the rule.

Severity level

6

Example

ACL/6/ACL_IPV6_STATIS_INFO: IPv6 ACL 2000 rule 0 permit source 1:1::/64 logging 1000 packet(s).

Explanation

The number of packets matching the IPv6 ACL rule changed.

Recommended action

No action is required.

 

ACL_NO_MEM

Message text

Failed to configure [STRING] ACL [UINT] due to lack of memory.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

3

Example

ACL/3/ACL_NO_MEM: Failed to configure ACL 2001 due to lack of memory.

Explanation

Configuring the ACL failed because memory is insufficient.

Recommended action

Use the display memory-threshold command to check the memory usage.

 

ACL_RULE_REACH_MAXNUM

Message text

The maximum number of rules in [STRING] ACL [UNIT32] already reached.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

5

Example

ACL/5/ACL_RULE_REACH_MAXNUM:The maximum number of rules in IPv4 ACL 3000 already reached.

Explanation

A dynamic ACL rule failed to be added because the maximum number of rules in the ACL already reached.

Recommended action

Delete unused ACL rules.

 

ACL_RULE_SUBID_EXCEED

Message text

The rule ID in [STRING] ACL [UNIT32] is out of range.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

5

Example

ACL/5/ ACL_RULE_SUBID_EXCEED: The rule ID in IPv4 ACL 3000 is out of range.

Explanation

A dynamic ACL rule failed to be added because the rule ID is out of range.

Recommended action

Modify the rule numbering step for the ACL.

 

ACL_STATIS_INFO

Message text

ACL [UINT32] [STRING] [UINT64] packet(s).

Variable fields

$1: ACL number.

$2: ID and content of an IPv4 ACL rule.

$3: Number of packets that matched the rule.

Severity level

6

Example

ACL/6/ACL_STATIS_INFO: ACL 2000 rule 0 permit source 1.1.1.1 0 logging 10000 packet(s).

Explanation

The number of packets matching the IPv4 ACL rule changed.

Recommended action

No action is required.

 

 

ADVPN messages

This section contains ADVPN messages.

ADVPN_SESSION_DELETED

Message text

An ADVPN tunnel was deleted: tunnel interface=[STRING], private addr=[STRING], public addr=[STRING], peer private addr=[STRING], peer public addr=[STRING], type=[STRING], last state=[STRING], last state duration=[STRING], domain name=[STRING], ADVPN group name=[STRING].

Variable fields

$1: Tunnel interface name.

$2: Private address of the ADVPN tunnel.

$3: Public address of the ADVPN tunnel.

$4: Peer private address of the ADVPN tunnel.

$5: Peer public address of the ADVPN tunnel.

$6: ADVPN tunnel type.

$7: Last state of the ADVPN tunnel.

$8: Duration for the last state of the ADVPN tunnel, in the format of xH yM zS.

$9: ADVPN domain name.

$10: ADVPN group name.

Severity level

4

Example

ADVPN/4/ADVPN_SESSION_DELETED:

An ADVPN tunnel was deleted: tunnel interface=888, private addr=112.168.60.56, public addr=192.168.60.137,peer private addr=112.168.60.18, peer public addr=192.168.60.11,type=Spoke-Hub, last state=Success, last state duration=0H 8M 8S,domain name=abc, ADVPN group name=

Explanation

An ADVPN tunnel was deleted.

Recommended action

Check the network connectivity and configuration.

 

ADVPN_SESSION_STATE_CHANGED

Message text

ADVPN tunnel state changed from [STRING] to [STRING]: tunnel interface=[STRING], private addr=[STRING], public addr=[STRING], peer private addr=[STRING], peer public addr=[STRING], type=[STRING], last state=[STRING], last state duration=[STRING], domain name=[STRING], ADVPN group name=[STRING].

Variable fields

$1: Original state of the ADVPN tunnel.

$2: New state of the ADVPN tunnel.

$3: Tunnel interface name.

$4: Private address of the ADVPN tunnel.

$5: Public address of the ADVPN tunnel.

$6: Peer private address of the ADVPN tunnel.

$7: Peer public address of the ADVPN tunnel.

$8: ADVPN tunnel type.

$9: Last state of the ADVPN tunnel.

$10: Duration for the last state of the ADVPN tunnel, in the format of xH yM zS.

$11: ADVPN domain name.

$12: ADVPN group name.

Severity level

4

Example

ADVPN/4/ADVPN_SESSION_STATE_CHANGED:

ADVPN tunnel state changed from Establishing to Success: tunnel interface=888, private addr=112.168.60.56, public addr=192.168.60.137,peer private addr=112.168.60.18, peer public addr=192.168.60.11,type=Spoke-Hub, last state=Establishing, last state duration=0H 0M 5S,domain name=abc, ADVPN group name=

Explanation

The state of an ADVPN tunnel was changed.

Recommended action

Check the network connectivity and configuration.

 

AFT

This section contains AFT messages.

AFT_V4TOV6_FLOW

Message text

Protocol(1001)=[STRING];SrcIPAddr(1003)=[IPADDR];SrcPort(1004)=[UINT16];NatSrcIPv6Addr(1038)=[IPADDR];NatSrcPort(1006)=[UINT16];DstIPAddr(1007)=[IPADDR];DstPort(1008)=[UINT16];NatDstIPv6Addr(1009)=[IPADDR];NatDstPort(1010)=[UINT16];InitPktCount(1044)=[UINT32];InitByteCount(1046)=[UINT32];RplyPktCount(1045)=[UINT32];RplyByteCount(1047)=[UINT32];RcvVPNInstance(1042)= [STRING]; SndVPNInstance(1043)=[STRING];BeginTime(1013)=[STRING];EndTime(1014)=[STRING];Event(1048)= [STRING].

Variable fields

$1: Protocol type.

$2: Source IPv4 address.

$3: Source port number.

$4: Source IPv6 address after AFT translation.

$5: Source port number after AFT translation.

$6: Destination IPv4 address.

$7: Destination port number.

$8: Destination IPv6 address after AFT translation.

$9: Destination port number after AFT translation.

$10: Total number of incoming packets.

$11: Total number of incoming bytes.

$12: Total number of outgoing packets.

$13: Total number of outgoing bytes.

$14: Source VPN instance name.

$15: Destination VPN instance name.

$16: Time when the session was created.

$17: Time when the session was removed.

$18: Event description:

¡     Session created.

¡     Session deleted.

Severity level

6

Example

AFT/6/AFT_V4TOV6_FLOW: Protocol(1001)=UDP;SrcIPAddr(1003)=10.10.10.1;SrcPort(1004)=1024;NatSrcIPv6Addr(1038)=100::1;NatSrcPort(1006)=1024;DstIPAddr(1007)=20.20.20.1;DstPort(1008)=21;NatDstIPv6Addr(1009)=100::1414:1401;NatDstPort(1010)=21;InitPktCount(1044)=1;InitByteCount(1046)=50;RplyPktCount(1045)=0;RplyByteCount(1047)=0;RcvVPNInstance(1042)=;SndVPNInstance(1043)=;BeginTime(1013)=03182024082546;EndTime(1014)=;Event(1048)=Session created.

Explanation

This message is sent when an IPv4-initiated session is created or removed.

Recommended action

No action is required.

 

AFT_V6TOV4_FLOW

Message text

Protocol(1001)=[STRING];SrcIPv6Addr(1036)=[IPADDR];SrcPort(1004)=[UINT16];NatSrcIPAddr(1005)=[IPADDR];NatSrcPort(1006)=[UINT16];DstIPv6Addr(1037)=[IPADDR];DstPort(1008)=[UINT16];NatDstIPAddr(1009)=[IPADDR];NatDstPort(1010)=[UINT16];InitPktCount(1044)=[UINT32];InitByteCount(1046)=[UINT32];RplyPktCount(1045)=[UINT32];RplyByteCount(1047)=[UINT32];RcvVPNInstance(1042)=[STRING];SndVPNInstance(1043)=[STRING];BeginTime(1013)=[STRING];EndTime(1014)=[STRING];Event(1048)=[STRING].

Variable fields

$1: Protocol type.

$2: Source IPv6 address.

$3: Source port number.

$4: Source IPv4 address after AFT translation.

$5: Source port number after AFT translation.

$6: Destination IPv6 address.

$7: Destination port number.

$8: Destination IPv4 address after AFT translation.

$9: Destination port number after AFT translation.

$10: Total number of incoming packets.

$11: Total number of incoming bytes.

$12: Total number of outgoing packets.

$13: Total number of outgoing bytes.

$14: Source VPN instance name.

$15: Destination VPN instance name.

$16: Time when the session was created.

$17: Time when the session was removed.

$18: Event description:

¡     Session created.

¡     Session deleted.

Severity level

6

Example

AFT/6/AFT_V6TOV4_FLOW: Protocol(1001)=TCP;SrcIPv6Addr(1036)=100::c613:102;SrcPort(1004)=1024;NatSrcIPAddr(1005)=101.1.1.14;NatSrcPort(1006)=1025;DstIPv6Addr(1037)=100::6;DstPort(1008)=1025;NatDstIPAddr(1009)=101.1.1.1;NatDstPort(1010)=1025;InitPktCount(1044)=1;InitByteCount(1046)=110;RplyPktCount(1047)=0;RplyByteCount(1047)=0;RcvVPNInstance(1042)=;SndVPNInstance(1043)=;BeginTime(1013)=03182024082901;EndTime(1014)=;Event(1048)=Session created.

Explanation

This message is sent when an IPv6-initiated session is created or removed.

Recommended action

No action is required.

 

ANCP messages

This section contains ANCP messages.

ANCP_INVALID_PACKET

Message text

-NeighborName=[STRING]-State=[STRING]-MessageType=[STRING]; The [STRING] value [STRING] is wrong, and the value [STRING] is expected.

Variable fields

$1: ANCP neighbor name.

$2: Neighbor state.

$3: Message type.

$4: Field.

$5: Wrong value of the field.

$6: Expected value of the field.

Severity level

6

Example

ANCP/6/ANCP_INVALID_PACKET: -NeighborName=Dslam-State=SYNSENT-MessageType=SYNACK; The Sender Instance value 0 is wrong, and the value 1 is expected.

Explanation

The system received an adjacency message that had a field with a wrong value.

Recommended action

No action is required.

 

 

ANTIVIRUS messages

This section contains antivirus messages.

ANTIVIRUS_IPV4_INTERZONE

Message text

Protocol(1001)=[STRING];Application(1002)=[STRING];SrcIPAddr(1003)=[IPADDR];SrcPort(1004)=[UINT16];DstIPAddr(1007)=[IPADDR];DstPort(1008)=[UINT16];RcvVPNInstance(1042)=[STRING];SrcZoneName(1025)=[STRING];DstZoneName(1035)=[STRING];UserName(1113)=[STRING];PolicyName(1079)=[STRING];VirusName(1085)=[STRING];VirusID(1086)=[UINT32];Severity(1087)=[STRING];MD5(1129)=[STRING];Action(1053)=[STRING];HitDirection(1115)=[STRING];RealSrcIP(1100)=[STRING];

Variable fields

$1: Protocol type.

$2: Application layer protocol name.

$3: Source IPv4 address.

$4: Source port number.

$5: Destination IPv4 address.

$6: Destination port number.

$7: Receiving VPN instance.

$8: Source security zone name.

$9: Destination security zone name.

$10: Username.

$11: Policy name.

$12: Virus name.

$13: Virus ID.

$14: Severity level:

¡     LOW.

¡     MEDIUM.

¡     HIGH.

¡     CRITICAL.

$15: MD5 value.

$16: Action:

¡     Reset & Logging.

¡     Permit & Logging.

¡     Redirect & Logging.

$17: Direction of matching packets:

¡     original.

¡     reply.

$18: Actual source IPv4 address.

Severity level

4

Example

ANTI-VIR/4/ANTIVIRUS_IPV4_INTERZONE:-Context=1;Protocol(1001)=TCP;Application(1002)=http;SrcIPAddr(1003)=100.10.10.40;SrcPort(1004)=56690;DstIPAddr(1007)=200.10.10.40;DstPort(1008)=80;RcvVPNInstance(1042)=;SrcZoneName(1025)=spf;DstZoneName(1035)=spf;UserName(1113)=abc;PolicyName(1079)=av;VirusName(1085)=MODIFIED-EICAR-Test-File;VirusID(1086)=95;Severity(1087)=MEDIUM;MD5(1129)=d41d8cd98f00b204e9800998ecf8427e;Action(1053)=Reset & Logging;HitDirection(1115)=original;RealSrcIP(1100)=10.10.10.10,20.20.20.20;

Explanation

This message is sent when an IPv4 packet matches a virus signature.

Recommended action

No action is required.

 

ANTIVIRUS_IPV6_INTERZONE

Message text

Protocol(1001)=[STRING];Application(1002)=[STRING];SrcIPv6Addr(1036)=[IPADDR];SrcPort(1004)=[UINT16];DstIPv6Addr(1037)=[IPADDR];DstPort(1008)=[UINT16];RcvVPNInstance(1042)=-[STRING];SrcZoneName(1025)=[STRING];DstZoneName(1035)=[STRING];UserName(1113)=[STRING];PolicyName(1079)=[STRING];VirusName(1085)=[STRING];VirusID(1086)=[UINT32];Severity(1087)=[STRING];MD5(1129)=[STRING];Action(1053)=[STRING];HitDirection(1115)=[STRING];RealSrcIP(1100)=[STRING];

Variable fields

$1: Protocol type.

$2: Application layer protocol name.

$3: Source IPv6 address.

$4: Source port number.

$5: Destination IPv6 address.

$6: Destination port number.

$7: Receiving VPN instance.

$8: Source security zone name.

$9: Destination security zone name.

$10: Username.

$11: Policy name.

$12: Virus name.

$13: Virus ID.

$14: Severity level:

¡     LOW.

¡     MEDIUM.

¡     HIGH.

¡     CRITICAL.

$15: MD5 value.

$16: Action:

¡     Reset & Logging.

¡     Permit & Logging.

¡     Redirect & Logging.

$17: Direction of matching packets:

¡     original.

¡     reply.

$18: Actual source IPv6 address.

Severity level

4

Example

ANTI-VIR/4/ANTIVIRUS_IPV6_INTERZONE:-Context=1;Protocol(1001)=TCP;Application(1002)=http;SrcIPv6Addr(1036)=100::40;SrcPort(1004)=56690;DstIPv6Addr(1037)=200::40;DstPort(1008)=80;RcvVPNInstance(1042)=;SrcZoneName(1025)=spf;DstZoneName(1035)=spf;UserName(1113)=aaa;PolicyName(1079)=av;VirusName(1085)=MODIFIED-EICAR-Test-File;VirusID(1086)=95;Severity(1087)=MEDIUM;MD5(1129)=d41d8cd98f00b204e9800998ecf8427e;Action(1053)=Reset & Logging;HitDirection(1115)=original;RealSrcIP(1100)=10::1;

Explanation

This message is sent when an IPv6 packet matches a virus signature.

Recommended action

No action is required.

 

ANTIVIRUS_WARNING

Message text

Updated the antivirus signature library successfully.

Variable fields

N/A

Severity level

4

Example

ANTI-VIR/4/ANTIVIRUS_WARNING: -Context=1; Updated the antivirus signature library successfully.

Explanation

This message is sent when the antivirus signature library is immediately or locally updated.

Recommended action

No action is required.

 

ANTIVIRUS_WARNING

Message text

Rolled back the antivirus signature library successfully.

Variable fields

N/A

Severity level

4

Example

ANTI-VIR/4/ANTIVIRUS_WARNING: -Context=1; Rolled back the antivirus signature library successfully.

Explanation

This message is sent when the antivirus signature library is rolled back to the previous version or the factory version.

Recommended action

No action is required.

 

ANTIVIRUS_WARNING

Message text

Failed to update the antivirus signature library because no valid license was found for the antivirus feature.

Variable fields

N/A

Severity level

4

Example

ANTI-VIR/4/ANTIVIRUS_WARNING: -Context=1; Failed to update the antivirus signature library because no valid license was found for the antivirus feature.

Explanation

This message is sent when one of the following antivirus signature library upgrade failure occurs:

·     Web-based or CLI-based immediate upgrade failed because no valid license is found.

·     Web-based local upgrade failed because no valid license is found.

Recommended action

No action is required.

 

 

APMGR messages

This section contains access point management messages.

AP_CREATE_FAILURE

Message text

Failed to create an AP with entity ID [UINT32] and model [STRING]. Reason: Region code is not available.

Variable fields

$1: AP ID.

$2: AP model.

Severity level

6

Example

APMGR/6/AP_CREATE_FAILURE: Failed to create an AP with entity ID 1 and model WA2620i-AGN. Reason: Region code is not available.

Explanation

The system fails to create an AP because the AP is not specified with a region code.

Recommended action

Specify a region code in global configuration view.

 

AP_REBOOT_REASON

Message text

AP in Run state is rebooting. Reason: The physical status of the radio is down.

Variable fields

N/A

Severity level

6

Example

APMGR/6/AP_REBOOT_REASON: AP in Run state is rebooting. Reason: The physical status of the radio is down.

Explanation

The AP is rebooting because a physical radio interface of the AP is in down state.

Recommended action

Verify that radio settings on the AP are correct after the reboot.

 

APMGR_ADDBAC_INFO

Message text

Add BAS AC [STRING].

Variable fields

$1: MAC address of the BAS AC.

Severity level

6

Example

APMGR/6/APMGR_ADDBAC_INFO: Add BAS AC 3ce5-a616-28cd.

Explanation

The BAS AC was connected to the master AC.

Recommended action

No action is required.

 

APMGR_AP_CFG_FAILED

Message text

Failed to reset AP [STRING]. Reason: The AP is writing an image file into the flash.

Variable fields

$1: AP name.

Severity level

4

Example

APMGR/4/APMGR_CFG_FAILD: Failed to reset AP ap2. Reason: The AP is writing an image file into the flash.

Explanation

AP reset failed because the AP is writing an image file into the flash.

Recommended action

Restart the AP after the AP finishes writing an image file into the flash.

 

APMGR_AP_ONLINE

Message text

The AP failed to come online in discovery stage. Reason: AP model [$1] is not supported.

Variable fields

$1: AP model.

Severity level

6

Example

APMGR/6/APMGR_AP_ONLINE: The AP failed to come online in discovery stage. Reason: AP model wa2620i-AGN is not supported.

Explanation

The AP fails to come online because its model is not supported by the AC and the AC cannot receive discovery requests from the AP.

Recommended action

No action is required.

 

APMGR_DELBAC_INFO

Message text

Delete BAS AC [STRING].

Variable fields

$1: MAC address of the BAS AC.

Severity level

6

Example

APMGR/6/APMGR_DELBAC_INFO: Delete BAS AC 3ce5-a616-28cd.

Explanation

The BAS AC was disconnected from the master AC.

Recommended action

No action is required.

 

APMGR_GET_AP_MODEL_FAILURE

Message text

Failed to get an AP model because no region code is configured globally or for AP group [STRING].

Variable fields

$1: AP group name.

Severity level

6

Example

APMGR/6/APMGR_GET_AP_MODEL_FAILURE: Failed to get an AP model because no region code is configured globally or for AP group g2.

Explanation

Failed to obtain the models of APs in an AP group because no region code is specified.

Recommended action

Specify a global region code or specify a region code for the AP group.

 

APMGR_LOG_ADD_AP_FAIL

Message text

AP [STRING] failed to come online using serial ID [STRING]: MAC address [STRING] is being used by AP [STRING].

Variable fields

$1: AP name.

$2: Serial ID.

$3: MAC address.

$4: AP name.

Severity level

4

Example

APMGR/4/APMGR_LOG_ADD_AP_FAIL: AP ap1 failed to come online using serial ID 01247ef96: MAC address 0023-7961-5201 is being used by AP ap2.

Explanation

The AP failed to come online because a manual AP that has the same MAC address already exists on the AC.

Recommended action

Delete either the manual AP that has the MAC address or the serial ID.

 

APMGR_LOG_LACOFFLINE

Message text

Local AC [STRING] went offline. State changed to Idle.

Variable fields

$1: Name of the local AC.

Severity level

6

Example

APMGR/6/APMGR_LOG_LACOFFLINE: Local AC ac1 went offline. State changed to Idle.

Explanation

The local AC went offline. The state of the local AC changed to Idle.

Recommended action

5.     If the local AC went offline abnormally, check the debugging information to locate the problem and resolve it.

6.     If the problem persists, contact H3C Support.

 

APMGR_LOG_LACONLINE

Message text

Local AC [STRING] went online. State changed to Run.

Variable fields

$1: Name of the local AC.

Severity level

6

Example

APMGR/6/APMGR_LOG_LACONLINE: Local AC ac1 went online. State changed to Run..

Explanation

The local AC came online. The state of the local AC changed to Run.

Recommended action

No action is required.

 

APMGR_LOG_MEMALERT

Message text

The memory usage of the AC has reached the threshold.

Variable fields

N/A

Severity level

4

Example

APMGR/4/APMGR_LOG_MEMALERT: The memory usage of the AC has reached the threshold.

Explanation

The AP failed to come online because the memory utilization exceeded the limit.

Recommended action

Stop creating manual APs and prevent APs from coming online.

 

APMGR_LOG_NOLICENSE

Message text

AP failed to come online in [STRING]. Reason: No license for the [STRING].

Variable fields

$1: AP state:

·     discover.

·     join.

$2: AP type:

·     common AP.

·     WTU AP.

Severity level

6

Example

APMGR/6/APMGR_LOG_NOLICENSE: AP failed to come online in discover. Reason: No license for the common AP.

Explanation

The AP failed to come online because the number of APs allowed by the license on the AC has reached the upper limit.

Recommended action

Purchase an upgrade license for AP number extension.

 

APMGR_LOG_OFFLINE

Message text

AP [STRING] went offline. State changed to Idle.

Variable fields

$1: AP name.

Severity level

6

Example

APMGR/6/APMGR_LOG_OFFLINE: AP ap1 went offline. State changed to Idle.

Explanation

The AP went offline. The state of the AP changed to Idle.

Recommended action

If the AP went offline abnormally, check the debugging information to locate the problem and resolve it.

 

APMGR_LOG_ONLINE

Message text

AP [STRING] came online. State changed to Run.

Variable fields

$1: AP name.

Severity level

6

Example

APMGR/6/APMGR_LOG_ONLINE: AP ap1 came online. State changed to Run.

Explanation

The AP came online. The state of the AP changed to Run.

Recommended action

No action is required.

 

APMGR_LOG_ONLINE_FAILED

Message text

[STRING] ([STRING]) failed to come online in join state. Reason: [STRING] ([STRING]) was offline.

Variable fields

$1: Name of a WTU or WAP.

$2: Serial ID of a WTU or WAP.

$3: Name of the connected WT or SPM.

$4: Serial ID of the connected WT or SPM.

Severity level

6

Example

·     APMGR/6/APMGR_AP_ONLINE_FAILED: WTU (219801A0WA916BQ12535) failed to come online in join state. Reason: WT (219801A11UC173000153) was offline.

·     APMGR/6/APMGR_AP_ONLINE_FAILED: WAP (219801A0VW916AG00254) failed to come online in join state. Reason: SPM (219801A13DB05B0004350) was offline.

Explanation

·     The WTU cannot come online because its connected WT is offline.

·     The WAP cannot come online because its connected SPM is offline.

Recommended action

Make the WT or SPM come online.

 

APMGR_REACH_MAX_APNUMBER

Message text

An AP failed to come online: Maximum number of APs already reached.

Variable fields

N/A

Severity level

4

Example

APMGR/4/APMGR_REACH_MAX_APNEMBER: An AP failed to come online: Maximum number of APs already reached.

Explanation

An AP failed to come online because the number of APs on the AC already reached the upper limit.

Recommended action

No action is required.

 

APMGR_ERROR

Message text

Failed to install WLAN feature package. Reason: Insufficient hardware resources.

Variable fields

N/A

Severity level

6

Example

APMGR/6/ERROR: Failed to install WLAN feature package. Reason: Insufficient hardware resources.

Explanation

The system failed to install the WLAN feature package because of insufficient hardware resources.

Recommended action

To resolve the problem:

7.     Uninstall the WLAN feature package.

8.     Locate the reason that causes hardware resource exhaustion and remove the issue.

9.     Reinstall the WLAN feature package.

10.     If the problem persists, contact H3C Support.

 

CWC_AP_DOWN

Message text

CAPWAP tunnel to AC [STRING] went down. Reason: [STRING].

Variable fields

$1: AC IP address.

$2: Reason:

·     Added AP IP address.

·     Deleted AP IP address.

·     AP interface used for CAPWAP tunnel went down.

·     AP config changed.

·     AP was reset.

·     Number of echo retransmission attempts exceeded the limit.

·     No license for the AP.

·     Full retransmission queue.

·     Data channel timer expired.

·     Backup AC IP address changed.

·     Backup tunnel changed to master tunnel.

·     Failed to change backup tunnel to master tunnel.

·     Backup method changed.

·     N/A.

Severity level

6

Example

CWC/6/CWC_AP_DOWN: CAPWAP tunnel to AC 192.168.10.1 went down. Reason: AP was reset.

Explanation

The CAPWAP tunnel between the AP and the AC was terminated for a specific reason.

Recommended action

Examine the network connection between the AP and the AC.

 

CWC_AP_UP

Message text

[STRING] CAPWAP tunnel to AC [STRING] went up.

Variable fields

$1: Tunnel type:

·     Master.

·     Backup.

$2: AC IP address.

Severity level

6

Example

CWC/6/CWC_AP_UP: Master CAPWAP tunnel to AC 192.168.10.1 went up.

Explanation

The AP was connected to the AC successfully and entered Run state.

Recommended action

No action is required.

 

CWC_AP_REBOOT

Message text

AP in state [STRING] is rebooting. Reason: [STRING]

Variable fields

$1: AP state.

$2: Reason:

·     Image was downloaded successfully.

·     Reset by admin.

·     Reset by CloudTunnel,

·     Reset on cloud,

·     The radio status was incorrect,

·     WT was offline,

·     Stayed in idle state for a long time.

Severity level

6

Example

CWC/6/CWC_AP_REBOOT: AP in State Run is rebooting. Reason: Reset by admin.

Explanation

The AP rebooted for a specific reason.

Recommended action

No action is required.

 

CWC_IMG_DOWNLOAD_COMPLETE

Message text

System software image file [STRING] downloading through the CAPWAP tunnel to AC [STRING] completed.

Variable fields

$1: Image file name.

$2: AC IP address.

Severity level

6

Example

CWC/6/CWC_IMG_DOWNLOAD_COMPLETE: System software image file 5800.ipe downloading through the CAPWAP tunnel to AC 192.168.10.1 completed.

Explanation

The AP downloaded the image file from the AC successfully.

Recommended action

No action is required.

 

CWS_IMG_DOWNLOAD_FAILED

Message text

Failed to download image file [STRING1] for [STRING2] [STRING3].

Variable fields

$1: Image file name.

$2: AP or local AC.

$3: Name of the AP or local AC.

Severity level

6

Example

CWS/6/CWS_IMG_DOWNLOAD_FAILED: Failed to download image file wa4300.ipe for AP ap1.

Explanation

The AP or the local AC failed to download the image file from the AC.

Recommended action

No action is required.

 

CWC_IMG_DOWNLOAD_START

Message text

Started to download the system software image file [STRING] through the CAPWAP tunnel to AC [STRING].

Variable fields

$1: Image file name.

$2: AC IP address.

Severity level

6

Example

CWC/6/CWC_IMG_DOWNLOAD_START: Started to download the system software image file 5800.ipe through the CAPWAP tunnel to AC 192.168.10.1.

Explanation

The AP started to download the image file from the AC.

Recommended action

Make sure the AP is correctly connected to the AC.

 

CWC_IMG_NO_ENOUGH_SPACE

Message text

Insufficient flash memory space for downloading system software image file [STRING].

Variable fields

$1: Image file name.

Severity level

6

Example

CWC/6/CWC_IMG_NO_ENOUGH_SPACE: Insufficient flash memory space for downloading system software image file 5800.ipe.

Explanation

The AP failed to download the image file from the AC because of insufficient flash memory.

Recommended action

Delete files not in use from the AP.

 

CWC_LOCALAC_DOWN

Message text

<