Login
| Title | Size | Downloads |
|---|---|---|
| 04-How to Use QoS Monitoring-Download.zip | 2.88 MB |
- Table of Contents
- Related Documents
-
4 How to Use QoS Monitoring
To view this video, click the download link.
Software Version Used
This video was recorded based on the following versions:
l iMC PLAT 3.20-R2606L11
l iMC VSM 3.50-R5403
Web interfaces of different versions may vary.
Video Description
The QoS monitoring function of the VSM allows you to view the specific QoS indexes of an IP phone that has bad voice quality.
This case illustrates how to use the VSM QoS monitoring function.
QoS monitoring is available only for some 3Com IP phones. Contact your vendor for relevant information.
Experiment Environment
l Ensure the target VCX device is operating normally and has connected to a registered IP phone.
l Ensure that the SSH settings on the VCX device are consistent with those on the iMC.
Recommended Configuration Flow
Step1 Add an IP phone to be monitored.
Step2 Add the monitoring device in Monitoring Setting and select monitoring indexes
Step3 View voice performance monitoring information
Step4 View QoS monitoring report
