- Products and Solutions
- Industry Solutions
- Services
- Support
- Training & Certification
- Partners
- About Us
- Contact Sales
- Become a Partner
-
Login
Country / Region
- Switches
- Server
- Routers
- Security
- Wireless
H3C S12500AI Switch Series
H3C S12500G-AF Switch Series
H3C S12500R Switch Router
-
H3C S12508CR Switch
H3C S12500CR Switch Series is a new generation of rack switches designed for data center core networks. It optimizes the CLOS switching fabric architecture and uses the variable cell-based traffic scheduling and control forwarding mechanism to deliver higher forwarding efficiency, more refined congestion control, and hierarchical scheduling.
-
H3C S12508R Switch Router
The H3C S12500R is a switching router product series launched by New H3C for WAN, 5G bearer network, and data center DCN and DCI scenarios. It uses an advanced CLOS+multilevel multiplane orthogonal switching architecture, offering superior forwarding performance and a wide range of WAN traffic scheduling features.
H3C S10500X-G Switch Series
H3C S9827 Switch Series
-
H3C S9827-64EO-LC Switch
H3C S9827-64EO-LC is the world's first 51.2T 800G CPO silicon photonic data center switch launched by H3C. The switch features 51.2 Tbps single-chip bandwidth and supports sixty-four 800G ports. By using an innovative high-efficiency cooling design and integrating advanced technologies such as CPO silicon photonics and intelligent lossless network, it fully meets the requirements of AI networks for high throughput, low latency, and energy saving. With premium network connectivity, it helps release the ultimate computing power in the AIGC era.
-
H3C S9827-128DH Switch
The H3C S9827-128DH is a cutting-edge, high-performance 400G LPO switch designed for premium data centers and AIGC intelligent computing scenarios, offering up to 51.2T system performance and support for 128*400G QSFP112 ports. It incorporates LPO linear direct-drive technology and features several advanced intelligent technologies, including AI ECN and dynamic load balancing, for lossless computing.
-
H3C S9827-64E Switch
The H3C S9827-64E is a cutting-edge, high-performance 800G LPO switch designed for premium data centers and AIGC intelligent computing scenarios, offering up to 51.2T system performance and support for 64*800G QSFP800 ports. It incorporates LPO linear direct-drive technology and features several advanced intelligent technologies, including AI ECN and dynamic load balancing, for lossless computing.
-
H3C S9827-64EP Switch
The H3C S9827-64EP is a cutting-edge, high-performance 800G LPO switch designed for premium data centers and AIGC intelligent computing scenarios, offering up to 51.2T system performance and support for 64*800G OSFP800 ports. It is ideal for fixed-port to fixed-port and chassis-to-fixed-port networking in high-density data center leaf and spine configurations.
H3C S7500X-G Switch Series
-
H3C S7506X-G OLT Switch
H3C S7500X-G is a high-end multi-service OLT & Routing Switch, offering deep convergence of PON and Ethernet. S7500X-G supports EPON, GPON, 10G EPON, XGSPON, along with IPv4/v6 Ethernet. S7500X-G’s ability to carry both PON and IPv4/v6 Ethernet traffics in one singe switch not only helps customers significantly reduce costs, but also greatly simplifies the network O&M. At the same time, the distributed architecture of S7500X-G ensures high forwarding performance and reliability for both PON and IPv4/v6 Ethernet networks.
-
H3C S7506X-G Switch
H3C S7500X-G is a high-end Routing-Switch series designed for multiservice networks; Fully compatible with 40G/100G Ethernet standards; Delivering a variety of high-availability features such as NSF, ISSU, graceful restart, RRPP.
H3C ES4200 Switch Series
-
H3C ES4200-16P2RX-B Switch
H3C ES4200 Building-Block Switch Series is a set of access products used for the H3C iOptic solution. Based on the new generation of high-performance hardware architecture, a single switch installed with modules can provide two or three networks, which achieves physical isolation in multi-network deployment. The switch can provide secure and convenient optical network access and high-speed bandwidth for industries such as education, enterprise, and healthcare.
-
H3C ES4200-8P2RX-B Switch
H3C ES4200 Building-Block Switch Series is a set of access products used for the H3C iOptic solution. Based on the new generation of high-performance hardware architecture, a single switch installed with modules can provide two or three networks, which achieves physical isolation in multi-network deployment. The switch can provide secure and convenient optical network access and high-speed bandwidth for industries such as education, enterprise, and healthcare.
-
H3C ES4200-4P2RMS-B Switch
H3C ES4200 Building-Block Switch Series is a set of access products used for the H3C iOptic solution. Based on the new generation of high-performance hardware architecture, a single switch installed with modules can provide two or three networks, which achieves physical isolation in multi-network deployment. The switch can provide secure and convenient optical network access and high-speed bandwidth for industries such as education, enterprise, and healthcare.
